Military Engineer Services-MES has published Repair Maint Of Internal Electrification Wiring Fittings And Fixtures And Rewinding Overhauling Painting Of All Types Of Fans Air Circulators And All Types Of Geysers Of Various Locations At Afs Under Ge ( Af ) Jorhat.. Submission Date for this Tender is 04-07-2022. Electrical Maintenance Tenders in jorhat Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down carefullypoint wiring (light, fan, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall / floor etc. complete all as specified and directed. |
| 2 | M & L for point wiring with 1.5 sqmm FRLS grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694drawn through and includingPVC cassing and capping (not less than 20 mm wide) complete with all acessoriesincluding PVC board/ box of suitable size for mounting of switches, sockets, regulators etc including 1.5 sq mmstranded copper conductor cable FRLS grade PVC insulated and unsheathed as earth continuity conductor for one lightpoint controlled by one way switch complete by maintaining the colour code complete all as specified and directed. |
| 3 | -Ditto- all as per Ser item No.2 here-in-before but for One ceiling / exhaust fan point controlled by one one way switch complete all as specified and directed. |
| 4 | -Ditto- all as per Ser item No 2 here-in-before but for 5 amps socket point on independent board complete all as specified and directed. |
| 5 | -Ditto- allas per Ser item No 2 here-in-before but for 5 amps socket point on same board controlled by another switch, complete all as specified and directed.. |
| 6 | -Ditto- all as per Ser item No 2 here-in-before but for One bell point controlled by one bell push complete all as specified and directed. |
| 7 | -Ditto- all as per Ser item No 2 here-in-before but with 2.5 sqmm cable for 15 amps socket outlet on independent board, using 2.5 sqmm earth continuity conductor complete all as specified and directed. |
| 8 | -Ditto- all as per sl. item No.2 here-in-before but with 4 sqmm cable for 20/25 amps power unit on independent board, using 4 sqmm earth continuity conductor complete all as specified and directed. |
| 9 | Supply and fixing ceiling rose surface backelite three terminals, PVC / polycarbonate, insulated body complete all as specified and directed. |
| 10 | Supply and fixing switch piano flush type, 6 Amps 240 volts single pole one way complete all as specified and directed. |
| 11 | Supply and fixing socket outlet, 5 pin 6 Amps, flush type complete all as specified and directed. |
| 12 | Supply and fixing socket outlet 15/16 Amps, 6 in 1, flush type complete all as specified and directed. |
| 13 | Supply and fixing switch piano flush type,15/16 Amps 240 volts single pole one way complete all as specified and directed. |
| 14 | Supply and fixing fan regulator electronictype, rotary step, socket type 240 volts complete all as specified and directed. |
| 15 | Supply and fixing Switch Bell push flush type, 5 Amps, 240 volts complete all as specified and directed. |
| 16 | Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified and directed. |
| 17 | Supply and fixing Switch socket combination 2 in 1, 5 Amps flush type complete all as specified and directed. |
| 18 | M & L for One light point controlled by one switch with PVC cables 1.5 sq. mm size insulatedunsheathed FRLS cable 1100 volts grade ISI marked with multi stranded copper conductor drawn through and including non-metallic rigid PVC conduit medium grade and conduit accessories ISI marked concealed in wall / ceiling/ fixed to roofetc and including provision of 1.5 sqmm PVC insulatedmultistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor, fabricated steel sunken terminal box duly painted made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium platedscrews and cup washers for housingswitches, socket outlets, fan regulators etc, complete all as specified and directed. |
| 19 | -Ditto- all as per Ser item No 18 here-in-before but for One ceiling / exhaust fan point controlled by one one way switch,complete all as specified and directed. |
| 20 | -Ditto- all as per Ser item No 18 here-in-before but for 5 amps socket point on independent board, complete all as specified and directed. |
| 21 | -Ditto- all as per Ser item No 18 here-in-before but for One bell point controlled by one bell push, complete all as specified and directed. |
| 22 | -Ditto- all as per Ser item No 18 here-in-before but with 2.5 sqmm cable for 15 amps socket outlet on independent board with 2.5 Sqmm earth continuty conductor complete all as specified and directed. |
| 23 | -Ditto- all as per Ser item No 18 here-in-before but with 4 sqmm cable for 20/25 amps Power Unit on independent board with 4 Sqmm earth continuty conductor complete all as specified and directed. |
| 24 | Supply and fixing switch piano modular type, 6 Amps 240 volts single pole one way complete all as specified and directed. |
| 25 | Supply and fixing socket outlet, 5 pin 6 Amps, Modular type, complete all as specified and directed. |
| 26 | Supply and fixing socket outlet6/16 Amps, 6 in 1, Modular type, complete all as specified and directed. |
| 27 | Supply and fixing switch piano modular type, 15/16 Amps 240 volts single pole one way complete all as specified and directed. |
| 28 | Supply and fixing modular plates with frame (white colour) 2 module complete all as specified and directed. |
| 29 | Supply and fixing modular plates with frame (white colour) 4 module complete all as specified and directed. |
| 30 | Supply and fixing modular plates with frame (white colour) 6 module complete all as specified and directed. |
| 31 | Supply and fixing modular plates with frame (white colour) 8 module complete all as specified and directed. |
| 32 | Supply and fixing switch belll push, modular type single pole, complete all as specified and directed. |
| 33 | Supply and fixing stepped type fan regulator electronic, modulartype,240 Volt,complete all as specified and directed. |
| 34 | Supply and fixing in repair 20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply andmounted on wall or ceiling,complete with all accessories internally prewired and including electrically connection withcopper conductor cable of size 0.5 Sqmm (nominal area) all as specified. Make:- Crompton, Cat No.CCS-102-20-65-SL-DP-NWH or equivalent model in Philips / Wipro as approved by GE. |
| 35 | Supply and fixing in repair 10 watt intregated LED tube light fitting 2 ft , suitable for single phase 230 Volts, 50 Hz AC supply andmounted on wall or ceiling,complete with all accessories internally prewired and including electrically connection withcopper conductor cable of size 0.5 Sqmm (nominal area)all as specified. Make:- Crompton, Cat No.CCS-102-10-65-SL-DP-NWH or equivalent model inPhilips / Wipro as approved by GE. |
| 36 | Supply and drawing submain wiring with four runs of single core 4 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unsheathed conductor drawn into PVC casing and caping and all necessary fittings including 2X4 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size & situation and making good disturbed surface complete all as specified and directed. NOTE:- (i)Extra lenght of cables/ wire required for connection to MCBs/DBs shall not be measured under this items. (ii) Cuttings / chasing of wall etc and making good the disturbed surface shall be measured and paid separately. (iii)Six runs of cable 4 Sqmm shall be measured as one RM of sub main wiring. |
| 37 | Supply and drawing submain wiring with two runs of single core 6 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unsheathed conductor drawn into PVC casing and capping and all necessary fittings including 6 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface complete all as specified and directed. NOTE:- (i)Extra lenght of cables / wire required for connection to MCBs / DBs shall not be measured under this items. (ii) Cuttings / chasing of wall etc and making good the disturbed surface shall be measured and paid separately. (iii)Three runs of cable 6 Sqmm shall be measured as one RM of sub main wiring. |
| 38 | -Ditto- all as per Ser Item No- 37 here-in-before but two runs of single core 4 Sqmm for phase & neutral and 01 run of single core 4 Sqmm for earth wire complete all as specified and directed. (i)Three runs of cable 4 Sqmm shall be measured as one RM of sub main wiring. |
| 39 | Taking down MCB DB / Main switch of any size and making good disturbed surface of wall / floor complete all as specified and directed. |
| 40 | Supply and fixing SP&N DBs, double door, 240 volt,12 way complete all as specified and directed. MAKE:- Legrand Cat part No. 5076 12 or equivalent of make L&T/ Siemens as approved by GE. |
| 41 | Supply and fixing SP&N DBs, double door, 240 volt,8 way complete all as specified and directed. MAKE:- Legrand Cat part No. 5076 11 or equivalent of make L&T/ Siemens as approved by GE. |
| 42 | Supply and fixing SP&N DBs, double door, 240 volt,4 way complete all as specified and directed. MAKE:-Legrand Cat part No. 5076 10 or equivalent of make L&T/ Siemens as approved by GE. |
| 43 | Supply and fixing TP&N DBs, double door, 240 volt,4 way complete all as specified and directed. MAKE:-Legrand Cat part No. 5076 70 or equivalent of make L&T/ Siemens as approved by GE. |
| 44 | Supply and fixing in repairVTPN DB , 415 volt,4 way, 200Amp Bus Barwith metal door having facility for MCCB incommingand MCB out going complete all as specified and directed. Make: Legrand Cat No. 507745 or its equivalent model in Havells, L & T, Schnieder as approved by GE. |
| 45 | S & F in repair MCCB 160 Amps current carrying capacity 415 volts, 25 KA, 4 pole thermal magnetic type complete all as specified and directed. MAKE:-Legrand Cat part No. 4200 57 or equivalent of make L&T/ Siemens/ Schnieder as approved by GE. |
| 46 | S & F in repair MCCB 100 Amps current carrying capacity 415 volts, 16 KA, 4 pole thermal magnetic type complete all as specified and directed. MAKE:-Legrand Cat part No. 4200 15 or equivalent of make L&T/ Siemens/ Schnieder as approved by GE. |
| 47 | S & F in repair MCCB 125 Amps current carrying capacity 415 volts, 16 KA, 4 pole thermal magnetic type complete all as specified and directed. MAKE:-Legrand Cat part No. 4200 16 or equivalent of make L&T/ Siemens/ Schnieder as approved by GE. |
| 48 | S & F in repair 415 volts, 10 KA, "C" curve Miniature circuit breaker (MCB) of TPN 40 to 100 Amps and current carrying capacity in the DB with connection testing and commissioning complete all as specified and directed. MAKE:-Legrand Cat part No. 4086 83 or equivalent of make L&T/ Siemens/ Schnieder as approved by GE. |
| 49 | S&F MCB single pole, 240 volts, 6 - 32 Amps, 10 KA, C Curve complete all as specified and directed. |
| 50 | S&F MCB single pole, 240 volts, 40 Amps, 10 KA, C Curve complete all as specified and directed. |
| 51 | S&F MCB single pole & neutral 240 volts 32Amps, C Curve complete all as specified and directed. |
| 52 | S&F MCB single pole & neutral 240 volts 40 to 63 Amps, C Curve in the MCB, DB with connection includingtestingcomplete all as specified and directed. |
| 53 | Supply and fixing in repairs surface mounting LED 2ft x2ft luminaire of capacity 36W with white powder coated CRCA housing with LEDs and full window acrylic diffuser etc.complete with all acessories internally prewired suitable for sigle phase 230volts 50Hz AC supply including connecting up with flexible copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified. Make -Crompton, Cat No.LCTLSNE-36-FO-CDL or its equivalent model in Philips/ Wipro as approved by GE. |
| 54 | Supply and fixing in repairs recessed mounted LED 1ft x4ft luminaire of capacity 40W with white powder coated CRCA housing with LEDs and full window acrylic diffuser etc.complete with all acessories internally prewired suitable for sigle phase 230volts 50Hz AC supply including connecting up with flexible copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified. Make -Crompton, Cat No.LCTLRN-40-CDL(1X4) or its equivalent model in Philips/ Wipro as approved by GE. |
| 55 | S&F in repairs Building security light30 watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete all as specified and directed. Make:Crompton, Cat No.LSTS-30-CDL-M or its equivalent model in Philips/ Wipro as approved by GE. |
| 56 | S & F in replacement of defective PVC casing and caping including joints, junction box, joint clip, I corner, T cap etc. complete all as specified and directed. Note : Rate are inclusive of PVC casing & caping and all its accessories. |
| 57 | S&F in replacement rigid non-metalicPVC conduit 32 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. |
| 58 | S & F in repairs Lamp holder, PVC / Polycarbonate type with cord grip cap suitable for pendant fitting complete all as specified and directed. |
| 59 | S & F 7W LED bulb B-22 type complete all as specified and directed. |
| 60 | S & F in repairs round recess mounted 15W LED edge lit slim downlight with dia- cast aluminum housing finished in preminium white powder coated eficacy 100 lm/w complete with all acessories internally prewired suitable for single phase 230volts 50Hz AC supply including connecting up with flexible copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified and directed. Make -Crompton, Cat No LSSCRM-15W-CDL or its equivalent modal of Philips / Wipro as approved by GE. |
| 61 | S & F in repairs polycarbonate unbreakable white globe doom of 8 inch dia in existing garden light pole complete all as specified and directed. |
| 62 | M & L in repairs PVC insulated three core 2.5 sqmm multistrand aluminium conductor for connection of garden / bldg security lights complete all as specified and directed. |
| 63 | Supply and fixing MCB protected POWER UNIT with one 25 amps socket, (incl 3 Pin Plug Top)including MCB DP and starter 25 Amps rating with six module plate and flush metal GI box and electrically connecting up fixed in repair complete all as specified and directed. Make : Havells cat No- DHDUCDP0253016-25 (25 Amps) or its equivalent model in Legrand/ L & T as approved by GE. |
| 64 | Taking down ceiling fan / exhaust fan/ wall fan including ceiling cable of any Size / Sweep and Make by disconnecting electric connection, dismantling blades, down rod and removing ceiling fan to MES STORE YARD OF AGE E/M (AF) JORHAT for Check-ing, complete all as specified and as directed (Repair / painting shall be measured & paid separately). |
| 65 | M&L for Opening Stator of ceiling fan 1200mm / 1400mm sweep cleaning of parts, greasing of moveable parts and re-assembling, after repair, testing complete all as specified and directed. NOTE : Replacement of unserviceable Parts viz burnt coil, Ball Bearing, Bush, Capacitor, etc. shall be measured and paid separately under respective Items as mentioned here-in-after. |
| 66 | M&L for taking out burnt coil of ceiling fan 1200mm sweep, cleaning the segments complete and Re-winding the same with super enamelled copper wire of same gauge and same weight with Insulation paper, varnishing and heating complete all as specified and directed. |
| 67 | All as per Ser Item No. 66 here-in-before but Ceiling Fan 1400mm Sweep complete all as specified and directed. |
| 68 | All as per Ser Item No. 66 here-in-before but exhaust fan 300 / 450 mm sweep complete all as specified and directed. |
| 69 | All as per Ser Item No. 66 here-in-before but wall mounted fan 300 / 450 mm sweep complete all as specified and directed. |
| 70 | All as per ser Item No. 66 here-in-before but padestal fan 300 / 450 mm sweep complete all as specified and directed. |
| 71 | M&L for re-assembling the ceiling fan / exhaust fan/ wall fan / padestal fan of any sweep after repairs and testing complete all as specified and directed. |
| 72 | Supply & fixing Ball bearing No. 6201 as approved suitable for ceiling fan of any sweep and make, complete all as specified and directed. |
| 73 | Supply & fixing Ball bearing No. 6202 as approved suitable for ceiling fan of any sweep and make, complete all as specified and directed. |
| 74 | Supply & fixing Ball bearing No. 6203 as approved suitable for ceiling fan of any sweep and make, complete all as specified and directed. |
| 75 | Supply & fixing Ball bearing No. 6204 as approved suitable for ceiling fan of any sweep and make, complete all as specified and directed. |
| 76 | Supply & fixing Ball bearing as ordered suitable for exhaust fan / wall fan / padestal fan 300/400/450mm sweep and complete all as specified and directed. |
| 77 | Supply & fixing capacitor 2.5 MFD 440 Volts AC 50Hz, suitable for ceiling fan of any sweep and Make, complete all as specified and as directed. |
| 78 | Supply & fixing capacitor 3.15 MFD 440 Volts AC 50Hz, suitable for ceiling fan of any sweep and Make, complete all as specified and as directed. |
| 79 | Supply & fixing Split pin (as per sample approved) for ceiling fan of any sweep and Make complete all as specified and directed. |
| 80 | Supply & fixing Bush (Gun metal) (as per sample approved) including lathe machining work as approved suitable for ceiling fan of any sweep and make complete all as specified and directed. |
| 81 | Supply & fixing Bush (Gun metal)(as per sample approved) including lathe machining work as approved suitable for exhaust fan / wall fan / padestal fan of any sweep and Make complete all as specified and directed. |
| 82 | Supply & fixing Down rod(as per sample approved) suitable for ceiling fan of any sweep and Make complete all as specified and directed. |
| 83 | Supply & fixing Down rod clamps with rubber reel(as per sample approved) of suitable sizeincluding necessary mild steel nut & bolts, washer etc. complete all as specified and directed. |
| 84 | M&L for Applying one coat DUCCO paint with spray painting machine including writing MES No. in black paint after preparation of surfaces of ceiling fan of 1200 /1400 mm sweep and Make, complete body, blade, down rod, cleaning dust, dirts, etc. including fillingcavities with filler complete all as specified and directed. |
| 85 | Hanging only ceiling fan of any sweep and make and connecting up electric connection, from ceiling rose / connector to fan, including Provn ofnecessary electric cable of required size from ceiling rose to fan complete all as specified and directed. |
| 86 | Taking down wall mounted Geyser of Capacity 25/35/50 ltrs by disconnecting electric supply and water connections including the defective spares and refixing after repair/maint work and testing all as specified and directed. Note : The spares required shall be measured and paid separately under relevant item here-in-after |
| 87 | Taking down and opening the Geyser, Descaling of silt deposited /Cleaning of inner tank ofgeyser 25 to 35 Ltrs capacity including washing with clean water, checking the spare parts, re-assemblingand testing complete all as specified and directed. |
| 88 | -Ditto- all as per Serial item No 87 here-in-before but of capacity 50 Ltrs capacity complete all as specified and directed. |
| 89 | M&L forRepairs to inner copper/Steel tank of geyser 50/35/25 Ltrs capacity for leaks by pressure test, includinggas welding and making the same leak proof, testing complete all as specified and directed. |
| 90 | Supply only the following spares for Geyser of 25/35/50 Ltrs capacity as per the make of the Geyser Make: Venus/Recold/Ramson/Orison/Bajaj/Ditz |
| 91 | Apparatus plate |
| 92 | Bimetal Thermostat |
| 93 | Auto cut thermostat |
| 94 | Heating element screw/push/triangular type any shape for 1.5 KW capacity as per the make at site |
| 95 | Heating element 2.0 Kilo watts with round/triangle base, push and clamp fixing type as per the make at site |
| 96 | Indicating lamp of any shape/size as per site requirement |
| 97 | Glass wool for insulating of tank |
| 98 | Steel water tank suitable for 25 Ltrs capacity |
| 99 | Copper water tank suitable for 35 Ltrs capacity |
| 100 | Copper water tank suitable for 50 Ltrs capacity |
| 101 | Air pressure release safetyvalve 15 mm dia |
| 102 | S&F in Replacement of Non-return valve made out of brass vertical type 15 mm dia ISI marked complete all as specified and directed |
| 103 | S&F in Replacement of bottom and top cover suitable for existing 50 lit capacitygeyser made out of 22 gauge MS sheet as per sample approved duly painted with white synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 104 | -Ditto- all as per serial item No 92 here-in-before but for 25 lit capacity of geyser complete all as specified and directed |
| 105 | S&F in Replacement of GI union, 15 mm dia medium grade complete all as specified and directed |
| 106 | S&F in Replacement of GI nipple, 15 mm dia , 50 mm long medium grade complete all as specified and directed. |
| 107 | S&F in Replacement of GI elbow 15 mm dia medium grade complete all as specified and directed |
| 108 | S&F in Replaceent of GI socket 15 mm dia, medium grade complete all as specified and directed |
| 109 | M&L for Prepration ofouter body surface of Geysers andpainting one coat of synthetic enamel paint by spray paintingand writing MES No on geyser in block letter not less than 5 mm wide and 25 mm high with black paint for 25 lit capacityof geysers complete all as specified and directed |
| 110 | -Ditto- all as per serial item No 98 here-in-before but for 50 Lit capacity Geysers complete all as specified and directed. |
| 111 | S&F in repairs Apparatus plate assembly by means of welding/brazing as required to stop leakage etc for 25/50 lit capacity geysersof existing make at site and testing complete all as specified and directed |
| 112 | S&F in repair Stop cock cast copper of 15mm bore, chromium plated high pressure with crutch handle including fitting/fixtures complete all as specified and directed. |
| 113 | S&F in repair MS nut bolts 4 Nos, 10 mm dia 150 mm long grouting to brick wall providing PCC (1:2:4) type B-1 for fixing of geyser and making good to disturbed surfaces complete all as specified and directed. |
| 114 | S&F PVC insulated3 core multistranded copper conductor cable of size 2.5 Sqmm maintaining color code (Red) for Phase, Black for Neutral and green for earth conductor) including taking down the old U/S cable all as specified and directed |
| 115 | S&F Galvanized iron pipe medium grade 15mm bore with all fittings/ fixtureslike Tee, Elbow, Bend, union socket etc fixed to wall/ceiling/floor with clamps including taking down the old U/s pipe all as specified and directed |
| 116 | S&F Sheet metal enclosure with three pin socket and top with one MCB double pole 20 Amps 240 Volts, 50Hz complete all as specified and directed, |
| 117 | S&FPlug Top of 16 Amps suitable for the geyser complete all as speciified and direcetd |
| 118 | S&F in repair Bib tap cast copper alloy of 15 mm bore with crutch handle complete all as specified and directed. |
| 119 | Taking down and shifting to other location Geyser of25 Litrs capacity and fixing with nuts bolts and washers after grouting in PCC 1:2:4 complete all as specified and directed. |
| 120 | Taking down and shifting to other location Geyser of50 Litrs capacity and fixing with nuts bolts and washers after grouting in PCC 1:2:4 complete all as specified and directed. |
| 121 | S&F Geyser 25 Lrts capacity suitable to operate in Single phase AC supply 230 volts 50Hz, 5 star rating having heating element 2KW capacity steel storage type body with copper inner tank,including provision of grouting of suitable size nuts, bolts with all accessories supports of MS/ wooden frame to supports Geyser complete all as specified and directed. Make : Crompton Greaves Model No. Juno or its equivalent Bajaj, Havells as approved by GE. |
| 122 | M&L for Sub main wiring 2 x 2.5 sqmm FR PVC insulated copper conductor ,single core cable in PVC casing caping alongwith PVC copper earth wire 1x2.5 Sqmm complete all as specified and directed. Note : Three runs of cable 2.5 Sqmm shall be measured as one RM of sub main wiring. |
| 123 | S&F Stainless steel flexibleconnection pipe for hot /cold water 15mm bore size with PTMT nuts of length 450 mm complete all as specified and directed Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule "A"/BOQ |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
