Water Supply Scheme Ghodki Tq. Washi Under Jal Jeevan Mission Water Supply Scheme Ghodki Tq. Washi
Tender Value
46.88 Lakhs
Estimated cost
Bid Submission
21 Jun 2022
0 days left
EMD
46881
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
washi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Water Supply Scheme Ghodki Tq. Washi Under Jal Jeevan Mission Water Supply Scheme Ghodki Tq. Washi
BOQ
| Sl. No. | Item Description |
| 1 | Sub Work No 1 Deepening for PWS WELL-1 (8m deepening) item no 1 Drilling of surface borewell including cost of all labour fuel machinery and transportation charges etc.comp. Taking Horizontal bore (as per GSDA certificate)ZP Osmanabad Approved Rate 2021-22. |
| 2 | item no 2Excavationin generalinhard material comprisingofsoftrock,hardrock,Manjara rock,etc,byblasting/controlledblasting,chisellingasrequiredinwetordry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposingoffsurplusexcavatedstuffwithinaradiusof0.5km.asdirectedby Engineer-in-charge, excluding refilling Lift 12.00 to 13.50 M |
| 3 | Lift 13.50 to 15.00 M |
| 4 | Lift 15.00 to 16.50 M |
| 5 | Lift 16.50 to 18.00 M |
| 6 | Lift 18.00 to 19.50 M |
| 7 | Lift 19.50 to 20.00 M |
| 8 | item no 3 Dewateringtheexcavatedtrenchesandpoolsofwaterinthe buildingtrenches/ pipeline trenches,well works by using pumps and other devices including disposing offwatertosafedistanceasdirectedbyEngineer-in-charge(includingcostof machinery, labour, fuel), etc. complete.5 BHP pumps daily 6 hrs for 10 days |
| 9 | item no 4 Carrying out recupration/ yield test for aserting the discharge of constructed well/ excavated profile as directed by engineer in charge. The test carried out by drawing down water from well/ profile below normal/ subsoil water level upto full dept rise in water level is recorded. the normal water level/ subsoil water level in the well/ profile as well as strainer suction level at pump as per design of W.S. scheme shall be recorded prior to the test including the cost ofall materials. overhead, labours etc. completed as directed. the test shall be carried out as per technical circular No. 2597 dt.20/11/97 and shall be carried out for 7 days.Lps less than 25,000 |
| 10 | Sub Work No 2 Deepening for MRGES WELL-1 (5m deepening) item no 1 Drilling of surface borewell including cost of all labour fuel machinery and transportation charges etc.comp. Taking Horizontal bore (as per GSDA certificate) ZP Osmanabad Approved Rate 2021-22. |
| 11 | Item No. 2Excavationin generalinhard material comprisingofsoftrock,hardrock,Manjara rock,etc,byblasting/controlledblasting,chisellingasrequiredinwetordry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposingoffsurplusexcavatedstuffwithinaradiusof0.5km.asdirectedby Engineer-in-charge, excluding refillingLift 15.00 to 16.50 M |
| 12 | Lift 16.50 to 18.00 M |
| 13 | Lift 18.00 to 19.50 M |
| 14 | Lift 19.50 to 20.00 M |
| 15 | Item No. 3 Dewateringtheexcavatedtrenchesandpoolsofwaterinthe buildingtrenches/ pipeline trenches,well works by using pumps and other devices including disposing offwatertosafedistanceasdirectedbyEngineer-in-charge(includingcostof machinery, labour, fuel), etc. complete.5 BHP pumps daily 6 hrs for 10 days |
| 16 | Item No. 7Carrying out recuperation/ yield test for asc-erting the discharge of constructed well / exca-vated profile as directed by Engineer in char-ge The test carried out by drawn down water from the well profile bellow normal sub soil water level upto full depth rise is water well profile as well as strainer suction level at pump as per design of W.S. seheme shall be recor-ded prior to the test including cost of all materials. Overhead, laborers etc. completed as directed. LPS Less than 25000 |
| 17 | Sub Work No 3Pure Water Pumping Machinery for PWS WELL-1 (3HP,1nos.)Item No. 1Providing, errecting and giving test of submersible Pump set confirming to I.S. 8034 and motor confirming to I.S. 9283 with water proof wiring, pump shall be suitable for various delivery head and discharge with stainless steel shaft, motor suitable for working 415V(+/-) 10%, 3 Phase, 50 Hz AC supply with cable guard, thrust carbon bearing to withstand entire hydraulic thrust. The pump shall be suitable for direct coupling with suitable suction, straining pump should have suitable discharge outlet as per manufacturers design. Stream lined non return valve shall be provided with pump, 3m submersible copper conductor cable and 2 pair of erection clamps, 65mm width, 150mm Dia thick shall be provided with each pump. 3.00HP 4993 LPH Discharge 61.00 Head in M. |
| 18 | Item No. 2 Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.50 mm dia. G.I. Pipe (Heavy) |
| 19 | Item No. 3Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc HP Pump |
| 20 | Item No. 4Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 3 core4 sq mm3 core4 sq mm |
| 21 | Sub Work No 4Pure Water Pumping Machinery for MREGS WELL-1 (3HP,2nos.)Item No. 1Providing, errecting and giving test of submersible Pump set confirming to I.S. 8034 and motor confirming to I.S. 9283 with water proof wiring, pump shall be suitable for various delivery head and discharge with stainless steel shaft, motor suitable for working 415V(+/-) 10%, 3 Phase, 50 Hz AC supply with cable guard, thrust carbon bearing to withstand entire hydraulic thrust. The pump shall be suitable for direct coupling with suitable suction, straining pump should have suitable discharge outlet as per manufacturers design. Stream lined non return valve shall be provided with pump, 3m submersible copper conductor cable and 2 pair of erection clamps, 65mm width, 150mm Dia thick shall be provided with each pump. 3.00 HP 4993 LPH Discharge 61.00Head in M. |
| 22 | Item No. 2 Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.50 mm dia. G.I. Pipe (Heavy) |
| 23 | Item No. 3 Providing and Fixing ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984) 80 mm dia Non return valve (Without Bypass Arrangement PN-1) |
| 24 | Item No. 4Providing and supply ISI Standard CI double fla-nged pipes including all taxes. Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in-charge 80 mm CIDF Pipe |
| 25 | Item No. 5Providing & fixing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm dia sluice valve |
| 26 | Item No. 6Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc HP Pump |
| 27 | Item No. 7Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 3 core4 sq mm3 core4 sq mm |
| 28 | Item No. 8 Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 29 | Item No. 9 EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 30 | Item No. 10Providing and erecting pressure gauge of required capacity complete with syphon tube, isolating cock suitable for 12mm dia GI pipe. Pressure gauge shall be installed as directed, with tapping on rising main pressure gauge (100 mm dia) |
| 31 | Sub Work No 5 Pure Water Rising Main for PWS Well -1 (PVC 6 Kg/cm2 90 mm, L=156m)Item No. 1 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).90 mm dia PVC 6 Kg/cm2 |
| 32 | Item No. 2 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation tostores, etc. complete as per IS-1239/2004. 80 mm dia GI PIPE (Medium) |
| 33 | Item No. 3 Providing & supplying PVC/GI specials ( 5 % of cost of pipe shall be considered percent of specials for estimate purpose.)5.00% |
| 34 | Item No. 6Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 35 | Item No. 7 Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 36 | Item No. 8Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 37 | item No 9Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. |
| 38 | Item No. 10Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction, etc complete. (Bd-A-10/263) |
| 39 | Item No. 11Lowering and laying and jointing with PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material except cement solvent, rubber ring giving satisfactory hydraullic testing as per IS Code etc complete (with cement sovlentjoint / ring fit joint working pressure 4 Kg./Sqm.) 90 mm dia PVC 6 Kg/cm2 |
| 40 | Item No. 12 Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge. 80 mm dia GI PIPE (Medium) |
| 41 | Item No. 17 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard murum material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 42 | Sub Work No 5 Pure Water Rising Main for MREGS Well -1 (HDPE PE-100 6 Kg/cm2 90 mm, L=1479m) Item No. 1Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, includingb transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.90 mm dia HDPE 6 Kg/cm2 |
| 43 | Item No. 2 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation tostores, etc. complete as per IS-1239/2004.80mm dia GI PIPE (Medium) |
| 44 | Item No. 3Providing & supplying HDPE/GI specials ( 5 % of cost of pipe shall be considered percent of specials for estimate purpose.)5.00% |
| 45 | Item No. 4Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stackingexcluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984) As Non Return Valve80 mm dia. Sluice Valve |
| 46 | Item No. 5Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete25.00mm dia. Single Ball Air Valve |
| 47 | Item No. 6 Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 48 | Item No. 7Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 49 | Item No. 8Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 50 | Item No. 9 Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. |
| 51 | Item No. 10 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction, etc complete. (Bd-A-10/263) |
| 52 | Item No. 11 Lowering, Laying and Jointing H. D. P. E./M D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 90 mm dia HDPE 6 Kg/cm2 |
| 53 | Item No. 12Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge. 80 mm dia GI PIPE (Medium) |
| 54 | Item No. 13 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)As Scoure Valve80 mm dia. Sluice Valve |
| 55 | Item No. 14Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap / granite/ quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc complete with initial lift of 1.50m below /above ground level. |
| 56 | Item No. 15Providing and fixing in position air valve shaft including providingand fixing GI Medium class or 6mm thick M.S, PIPE shaft 2.70m long over branch flange of air valve tee providing PCCblock of M- 150concrete 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged ionts wherver required and fixing of air valve over the shaft excluding cost of air vavle and branch flanged air valve tee, etc. complete as per type desihn and as per directed by Engineer - in -charge for following diameters of pipe line Foundation in B. C. Soil or Any Other Soil.90 mm Pipe Line |
| 57 | Item No. 17Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard murum material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 58 | Sub work No. 6 RCC ESR Capacity of 27000 Liters, for 16 Meter Staging Item No. 1 Designing (aesthetically) and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5M. Centre to centre for ESR having capacity upto 500cum and not more than 6 m. c/c for ESRs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 M. all labour and material charges including lowering, laying, erecting,, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental desing, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers water level indicatiors, lightening conductor, G.I. pipe railing around walk etc........Complete RCC ESR Capacity of 27000 Liters, for 16 Meter Staging |
| 59 | Item No. 2Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores unloading etc. complete as directed by Engineer-in-charge.,80 mm dia CIDF Pipes |
| 60 | Item No. 3Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.c) Sluice valve - PN - 1 (Without by pass arrangement)80 mm dia CIDF Sluice Valve |
| 61 | Item No. 4 Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. Diameter 80 mm to 300 mm |
| 62 | Sub work No 7 Distribution System (L=1338 M) Item No. 1 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 90mm dia pvc 4 kg/cm2 |
| 63 | 75mm dia pvc 4 kg/cm2 |
| 64 | Item No. 2 Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. completeas per IS-1239/2004.80mm dia G.I pipe medium class |
| 65 | Item No. 3Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.65mm dia CIDF Sluice valve |
| 66 | Item No. 4Providing and supplying PVC/C.I/G.I. Specials.5.00% of Pipe Cost |
| 67 | Item No. 5Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. 0.0 to 1.50. |
| 68 | Item No. 6Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 69 | Item No. 7 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 70 | Item No. 8Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by machnial means or by any other means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete. |
| 71 | Item No. 9 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction, etc complete. (Bd-A-10/263) |
| 72 | Item No. 10Lowerig and laying and jointing with PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material except cement solvent, rubber ring giving satisfactory hydraullic testing as per IS Code etc complete (with cement sovlentjoint / ring fit joint working pressure 4 Kg./Sqm.)90mm dia pvc 4 kg/cm2 |
| 73 | 75mm dia pvc 4 kg/cm2 |
| 74 | Item No. 11 Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.80mm dia G.I pipe medium class |
| 75 | Item No. 12 Lowering, laying and jointing Valves and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by Engineer-in-charge .65mm dia CIDF Sluice valve |
| 76 | Item No. 13Providing and fixing C I Road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing etc comp.a) 100 x 225 mm (20 kg) |
| 77 | Item No. 14Providing and laying in situ 1:2:4(M-150) grade of C.C. of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including dewatering from work, compacting and curing, finishing etc. complete with initial lift of 1.50m below / above ground level. |
| 78 | Item No. 15Refilling the trenches with available excavated stuff with soft material first over pipelines and then hard material in 15cm layers with all leads and lifts including consolidation surcharging etc complete. |
| 79 | Sub work No 8 Functional Household Tap Connection (FHTC) and Name Board Item No.1 Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer in A) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul) for HDPE & PVC pipeFor MDPE/UPVC Pipe Service Connection on Disribution main(Without Road Crossing)For 15 mm Service connection |
| 80 | B) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul) for HDPE & PVC pipeFor MDPE/UPVC Pipe Service Connection on Disribution main(With Road Crossing)For 15 mm Service connection |
| 81 | Item No.2Providing and fixing informatory sign boards shape of size 0.90 x 0.60 m made out of 3mm Aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35 mm X 5 mm & M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Aluminum composite panel with Type IV High Intensity Micro-Prismatic Grade Sheeting. Spec.No. As per IRC-67, 2015 |
| 82 | SUBWORK NO. 10 :-TRIAL & RUN Item No. 1 :- Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. |
| 83 | Item No. 2 :- Material Bleaching Powder |
| 84 | Item No. 3 :- MSEB Charges Pure Water P/Mach |
AI Tender Summary
Tender Timeline
Jun 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender