|
| 1 | SURF BOARD Provoding and fixing of Surf Board of size 910mm (Length) 860mm(Width)x:400mm(Height) fabricated with a center pipe of 100mm nominal bore shall be made form \"C\" class G.I. Pipe the steeve pipe shall be made of 125mm 0D seamless pipe with thickness of smm and bolted to main frame with M10 SS bolts. the bottom Support shall be welded of M.S. Plate of Q 250 mm & 10mm thickness. the handle frame of 25NB shall be made from \"C\" class G.I. pipe the paddie frame of 50NB shall be made from \"C\" class G.I. pipe supported with 70X8mm bend M.S. flat and can be replacable the foundation to be used for fixing should be a structure and shall be made from center pipe G.I. of 80NB \"C\" class welded with M.S. round plate of 250mm & 10mm thick. main pipe shall be supported with 25mm x 25mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipes of 3 mm thickness. boshes shall be used of 70 mm Outer Diameter with 5mm thickness. the footests shall be made from aluminum casting material of size 320ins to be used of diameter 35mm,25mm and 17mm shall be made up from SAE 8620 bright the bearings shall be used of \"6007zz\" \"62 and \"6203zz\" permanent lubricated sealed bearings shall be used of \"6007zz\" ( ) high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester poeders of ackzonoble of berger paints with 60 to 70 Micron thickness. A16, A24 mm circlips shall be used for assembly. bolt M8X16 mm and NY lock nut of M8 shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, all complete as per drawing design. directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing( 5x2=10nos) |
| 2 | CROSS TRAINER Providing and fixing of cross trainer of size 1320 mm (Length) x 600mm (width) x1750mm (Height) fabricated with the main frame pipes of 80 NB shall be made of \"C\" Class G.I. and pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of 250 mm & 10mm thick. the Handle frame shall be made up of 25NB \"C\" Class G.I. Pipe the foundation Should be used for fixing is a structure and shall be made from center pipe of G.I. pipe of 80 NB \"C\" Class weled with M.S. round plate of 250 mm & 10mm thick. Main pipe should be supported with 25mm x 25 mm M.S. angle of 3 mm thickness and 20mm x 40mm and CRC Square pipes of 3mm thic to build structure bushes to be used which shall be made from M.S Pipe of 60mm OD with 5 mm thickness. the footrests shall be made from Aluminium casting material of size 130mm X310mmx5mm thickness and mounted on M.S. plate of size 130mmx310mmx3mm thick. Pmm x270mmx5mm for support to footrest of 200mmX250mm with 3mm thickness M.S. plate shall be used closting caps shall be made up of high quality fiber reinforced plastic material, the bearing shall be used are of \"6007zz\" permanent lubricated sealed bearing of reputed brand (SKF/FAG), High tensile steel with galvanized nut bolts shall be used for assembly. the carclips shall be used for assembly of berger with 60 to 70 micron thickness. all complete as per drawing, design, directions and apporoval cf Engineer-incharge regarding material, shape of equipment, colour (of Metal, seat and pedal), and fixing of equipment etc.all. shape of. ( 5x2=10nos) |
| 3 | Provoding and fixing of thi-chi spinner (2 wheel) of size 700mm (length) x 1000mm (width) x 1280mm (height) fabricted with a center pipe of 200NB Shall be made up of \"C\" class G.I. pipe the handle movemetn round frame shall be made up from 25 NB \"C\" class G.I. pipe the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. 80NB \"C\" class welded with M.S. round plate of 250mm & 10mm thick main pipe shall be supported with 25mm x25mm M.S. agnles of 3mm thickness and 20mm x 40mm CRC squre pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material the pins to be used shall be made up of 25mm of SAE8620 bright material the bearing shall be used of \"6201zz\" & \"6205zz\" permanent lubricated sealed bearing of requted brand (SKF/FAG) high tensile S.S. nut bolts shall be used for assembly. fundation cover closing cap shall be made from FRP Material with 0.7 mm thicknes the cerclips used for assembly shall be of of A24 and A11 the nylon bush shall be used for handle knob. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness. bolt M8x16mm nd nylock nut of MB shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pips from rain and dust all complete as per drawing , design, directions and apporval of engineer in charge regarding material, shape of equipment, colour (of metal, seat and pedal) and fixing of equipment etc. ( 5x2=10nos) |
| 4 | SEATED PULLER Providing and fixing of seated puller of size 1900mm (length) x 740mm (Width) x 1920mm (Height) fabricated with a center pipe is of 100NB shall be made from \"C\" class G.I. pipe Bottom support of M.S round plate of 250mm & 10mm thickness shall be welded All linkages shall be made up of 25NB \"C\" class G.I. pipe the handle frame of 32NB \"C\" class G.I. pipe the seat frame of 32NB \"C\" class G.I. pipe to build structure bushes to be used which shll be made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush shall be made from center pipe og G.I. of 80NB \"C\" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe shall be supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness. foundation cover costing cap shall be made from FRP Material the seats and back rests to be fitted on the outer frames shall be made up of M.S. sheet of size 330 mm X 300mmX2mm thickness and deep and pressed in tools and diles to have uniform radius of 20mm with no sharp closing caps shall be made up of high quality fiber reinforced plastic material pips to be used of diameter 25mm and 17mm shall be made up from SAE 8620 bright material the bearings shall be used of \"620zz\" and \"6203zz\" permanent lubricated sealed bearing of requted brand (SKF/FAG) high tensile steel with galvanzed nuts & bolts shall be used for assembly. the cerclips to be used for assembly are of A16 the power costing shall be done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and apporoval of engineer in Charge regarding material, shape of equipment Colour of metal , seat and pedal) and fixing of equipment etc. ( 5x1=5nos) |
| 5 | SEATING & STNDING TWISTER providign and fixing of seating & standing twister of size 1700mm (Length) x 540mm(width)x 1250mm (Height) fabricated with a center pipe of 100mm NB shall be made from \"C\" class G.I. round pipe the M.S. round plate of 250 mm & 10 mm thickness shall be welded at bottom. handle and bottom sleeve pipe of 125mm OD with thickness 5mm should be provided for easy assembly, replacement and maintenance. the bottom frame of the seating & standing twister of 32NB 50 NB and 25 NB shall be made from \"C\"class G.I. pipe the handle frame of seating & standign twister of 25 NB & foot resting frame of seating side shall be made from \"C\" class G.I. pipe of 25mm NB the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB \"C\" class welded with M.S. round plate of 250 mm & 10mm thick main pipe shall be supported with 25mm X 25mm M.S. angles of 3 mm thickness. and 20mm x 40mm CRCA square pipes of 3mm thickness. the twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm dimeter and 10mm thickness. closing caps shall be made up high quality fiber reinforced Plastic mterial. the pins to be used which shall be up of 35 mm SAE 8620 bright material. the bearings shall be made of fo \"6205zz\" permanent lubricated sealed bearing of reputed brand (SKF/FAG) high rensile steel with galvanized nuts & bolts shall be used for assembly the powder coating shall be done by pure polyester powder of berger paint with 60 to 72 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regading material, shape of equioment colour (of metal seat and pedal), and fixing of equipment etc. ( 5x1=5nos) |
| 6 | PUSH UP BARS Providing and fixing of push up bars of size 1220mm (length) x 550mm (width) x 1700mm (Height) fabricated with the main frame of 100 NB shall be made from \"C\"class G.I. pipe the M.S. round plate of 250mm & 10mm thickness shall be welded at bottom the handle frame of 25 NB shall be made from \"C\" class G.I. pipe the foundation shoud be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB \"c\" class welded with M.S. round plate of 250mm & 10mm thick. main pipeshall be supported with 25 mm X 25 mm M.S. angles of 3 mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material foundation cover closing cap shall be made from FRP material, High tensile steel with galvanized unts & bolts shall be used for assembly. the powder coting shall be done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness. all complete as per drawing, design, directions and apporval of engineer-in-charge regarding material, shape of equipmetn colour (of metal, seat and pedal) and fixing of equipment etc. ( 5x1=5nos) |
| 7 | POMMEL HORSE Providing and fixing of pommet horse of size 2150mm (Length) x 800mm (Width) x 800mm (Height) Fabricated with the main frame of 80NB and 50Nb shall be made from \"C\" class G.I. pipe the handle frame of 32NB Shall be made from \"C\" class G.I.pipe 40mm x40mm CRC square pipes frame shall be placed on the 25mm x 25mm x 3mm M.S. Angle with 60 X 10m thickness flat should be used for support, Closing caps shall be made up of high quality fiber reinforced plastic material high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powder Ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment colour (of metal, seat and pedal), and fixing of equipment etc. ( 5x1=5nos) |
| 8 | CHEST PRESS Providing and fixing of chest press of size 200mm (Length) x 210mm (Width) x 220mm (Height) fabricated with the center pipe of 100NB shall be made up \"C\" class G.I. pipe the bottom shall be welded with support of M.S. round Plate of 250mm & 10mm thickness. the connecting pipe shall be made up from 25NB \"C\" class G.I.pipe the handle frame shall be made up from 32NB \"C\" class G.I. pipe to build structure bushes to be used which shall be made from MS seamless pipe of 60mm O.D and 5mm thickness as well as 60mm diameter sold bar bush shall be used the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. pipe of 80 NB \"C\" class welede with M.S. round plate of 250 mm & 10mm thick. Main pipe shall be supported with 25mm x 25mm M.S. agnles of 3 mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness the seats and back rests to be fitted on the outer frames shall be made up of M.S. sheet of size 330mm X 300mmX 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. closing caps shall be made up of high quailty fiber reinforced plastic material foundation cover cap shall be made from FRP material with 0.7 thickness. pins to be used diameter 25mm and 17mm shall be made up from SAE 8620 bright material. bolt MBx16mm and nylock nut of MB shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, the bearings shall be used are of \"6205ZZ\" & 6203zz\" permanent lubricated sealed bearing of reputed brand (SKF/FAG) high tensile steel with galvanized nuts & bults shall be used for assembly. the cerclips to be used for locking shall be made up of A24mm & A16mm the powder coating shall be done with pure polyster powder from Ackzonoble or Berger paints with 60 to 70 micron thickness] all con leter as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment colour (of metal, seat and pedal), and fixing of equipment etc.( 5x1=5nos) |
| 9 | SIT BOARD DOUBLE providing and fixing of sit up board double of size 1760mm (Length) x 1140mm (width) x 660mm (height) fabricated with the main frame of 25mm NB shall be made from \"C\" class G.I. pipe FRP sheet of 3mm thickness shall be moulded on main frame the remaining frame of the sit up board of 32mm NB shall be made from \"C\" class G.I pipe the powder coating shall be done with pure polyester powder ackzonoble or berger paints with 60 to 70 micron thickness the foundation shoud be used for fixing as structure and shall be made from center pipe G.I. of 80NB \"C\" class welded with M.S. round plate of 250mm & 10mm thick. M.S. main pipe shall be supported with 25mm x M.S. angles of 3 mm thickness. and 25mmx40mm CRC square pipes of 3mm thickness all complete as per drawing design directions and approval of engineer-in-charge regarding material shape of equipment colour (of metal, seat and pedal) and fixing of equipment etc ( 5x1=5nos) |
| 10 | DOUBLE TWISTER STANDY Providign and fixing of bouble Twister standing of size 1500mm (Length) x 600mm (width) x 1300mm (Height) Fabricated with a center pipe of 100NB shall be made from \"C\" Class G.I. material the bottom shall be welded with support of M.S. round plate of 250mm & 10mm thickness. The bottom frame of 32NB shall be made from \"C\" class G.I. pipe handle frame of 25NB shall be made from G.I. pipe the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB \"C\" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe shall be supported with 25 mm x 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. the Twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm and 10mm thick. Closing caps shall be made up of high quality fiber reinforced plastic material pins to be used of diameter 35mm shall be made up from SAE 8620 bright material the bearings shall be used are of \"6205\" permanent fubricated sealed bearing of reputed brand heigh tensile steel with galvanized nuts and bolts shall be used for assembly the powder coating shall be done with pure polyester powders from ackzsnoble paints with 60 to 70 micron thickness. all complete as per drawing desing directions and approwal of engineer-in-charge regarding material shape of colour (of metal seat and pedal) and fixing of equipment etc. ( 5x1=5nos) |
