Construction Of Langer Hall At Gurudwara Singh Saba Dardpora, Kreeri Baramulla.
Tender Value
10.96 Lakhs
Estimated cost
Bid Submission
20 Jun 2022
0 days left
EMD
21920
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kreeri → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Langer Hall At Gurudwara Singh Saba Dardpora, Kreeri Baramulla.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected: All kinds of soil (1 meter from cutting edge) |
| 2 | Supplying/filling dry stone soling tightly hand packed under foundation & under floors includingall carriages / head load upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) using crushed aggregate includingall carriages / head load upto site of work complete. |
| 4 | Centering and shuttering including strutting, propping etc and removal of form for 12mm thick watrr proof ply board. |
| 5 | a) Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | b)Suspended floors, roofs, landings, balconies & access platform & shelves ( cast in situ). |
| 7 | c) Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 8 | d) Edges of slabs and breaks in floors and walls.(Under 20 cm wide) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete excluding thecost of centering, shuttering, finishing and reinforcement-all work upto foundation / plinth andfloor V- level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) including all carriages / head load upto site of work complete. |
| 10 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete (Thermo-mechanically treated bars) including all carriages / head load upto site of work complete. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) using crushed aggregate including all carriages / head load upto site of work complete. |
| 12 | Brick work with common burnt clay F.P.S (non-modular ) bricks class designation 75 in foundation & plinth including superstructure above plinth level upto floor V level incement mortar 1:6 (1 cement : 6 course sand) including cost of scaffolding charges and all carriages / head load upto site of work complete. |
| 13 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement : 6 fine sand)including all carriages / head load upto site of work complete. |
| 14 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) including all carriages / head load upto site of wor |
| 15 | P/applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 16 | P/F 32mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked M.S. pressed but hinges bright finished of required size with necessary screws of 1st class kail wood. |
| 17 | P/F panneling or panneling & glazing in panneled or panneled and glazed shutters for doors, windows and clerestory windows (area of opening for pannelexcld. portion inside grooves or rebates to be measured) panelling for panneledinserts and glazed shutters 25mm to 40mm thick.(Prelaminated partical board with decorative limination on both sides) complete in all respects. |
| 18 | Providing/Fixingof door window Hardware fittings of standard quality:- |
| 19 | a) Tower bolts 100mm. |
| 20 | b) Tower bolts 150mm. |
| 21 | c) Handle 125mm. |
| 22 | d) Handles 150mm. |
| 23 | e) Aldrop 300 mm |
| 24 | f) Wind Hookd. |
| 25 | P/F of 12 mm thick Nordic Pine wall paneling (T&G) fully finished & four sides planned, fungus and termite proof (seasoned moisture content 8% to 15% imported type ISO :14001 approved including fixing with head less nails and inclusive all carriages, all taxes of allied material involved complete. (Including buloo wood frame work by 50x30mm battens not more than 600mm C/C both way,12mm thick ply wood and two or more coats of touch woodpolishing) |
| 26 | MARBLE STONE FLOORING: Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Agaria White -18mm thick including all carriages / head load upto site of work complete. |
| 27 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work-exposed on wall with clamps at 1.00 meter spacing |
| 28 | (16mm OD) pipe(Internal) |
| 29 | (20mm OD) pipe(Internal) |
| 30 | (25mm OD) pipe(External) |
| 31 | (32mm OD) pipe(External) |
| 32 | P/F of following PPR fittings of approved quality complete. |
| 33 | a) 20mm |
| 34 | b) 25mm |
| 35 | c) 32mm |
| 36 | d) 40mm |
| 37 | P/F C.P. Brass sanitary fittings(Jaguar or equivalentmake) all complete:- |
| 38 | a) Sink mixer |
| 39 | b) Angle valve. |
| 40 | c) Floor grating 100mm. |
| 41 | d) Floorm trap 75mm. |
| 42 | e) Connection 24\" to 18\". |
| 43 | f)Waste pipe flexible with waste cup. |
| 44 | P/F Salem stainless steel A ISI 304 (18/8)sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm incld. painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board 450mmx600mmx225mm deep. |
| 45 | P/F of following PVC pipes (Prince/Supreme make)having pressure 4 kg N/cm incld. cutting and making good the walls where ever necessary required all complete.(inclduing all required fittings) |
| 46 | a) 100 mm dia. |
| 47 | b)75 mm dia. |
| 48 | P/F wash basin with C.I. / M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets cutting & making good the walls wherever required (White vitreous china)wash basin size 630x450mm with a pair of 15mm C.P. brass pillar taps Includingwhite vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 49 | P/F 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 50 | P/F PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and color, weighing not less than 88g. |
| 51 | P/F liquid soap dispenser suitable for operation with less than 5 pounds of force complete with C.P. lid and brackets fixed to wall/ door with wooden cleats and C.P. screws including cutting and making good the walls wherever requied. |
| 52 | P/F of ornamental eaves boarding (300x40mm) of first class budloo wood as per the approvedpattern and design including cost of nails / screws and scaffolding charges / PU polish over prepared base / finishing to be approved by Engineer-in-charge complete in all respects. |
AI Tender Summary
Tender Timeline
Jun 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender