Rajasthan State Road Development And Construction Corporation Limited has published Electric Work In Construction Of Stadium And Development Works At Sangod, Distt. Kota . Submission Date for this Tender is 23-06-2022. Electrification Work Tenders in sangod Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Jun-2022 | Corrigendum to NIT No. 116 dated 16.06.2022 | Other | 23-06-2022 |
| Sl. No. | Item Description |
| 1 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate,screws,making connections, testing etc. as required. |
| 2 | Short point (up to 3 mtr.) |
| 3 | Medium point (up to 6 mtr.) |
| 4 | Long point(up to 10 mtr..) |
| 5 | Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tles, Hot Dipped Galvanized M.S Modularbox of 20 SWG with earth terminal,6 A two way Modular switch, Modular plate with grid plate,screws,making connections, testing etc. as required. |
| 6 | Long point(up to 10 mtr..) |
| 7 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it"s accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modularswitch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. |
| 8 | On board |
| 9 | Long point(up to 10 mtr..) |
| 10 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required. |
| 11 | 20 mm |
| 12 | 25 mm |
| 13 | 32 mm |
| 14 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. |
| 15 | 3x 1.5 sq.mm |
| 16 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 17 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 18 | 4 x 6.0 sq.mm |
| 19 | 1 x 4.0 sq.mm |
| 20 | 4 x 10.0 sq.mm |
| 21 | 1 x 6.0 sq.mm |
| 22 | Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned /annealed copper conductor taped &confirming to ITD specification S/WS -113C ofapproved make in existingsurface or recessed conduit/casing capping. |
| 23 | Unarmoured Telephone cable in existingsurface or recessed conduit/casing capping. |
| 24 | 2 pair |
| 25 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required. |
| 26 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.Gr 1 |
| 27 | Single pole MCB |
| 28 | 6 A to 32 A rating |
| 29 | Double pole MCB |
| 30 | 6 A to 32 A rating |
| 31 | Four pole MCB |
| 32 | 40 A 63 A rating |
| 33 | P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required |
| 34 | Two pole 100/300mA sensitivity |
| 35 | 63 A rating |
| 36 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required. |
| 37 | Double door (Three phase) |
| 38 | 6 Way |
| 39 | Doubledoor (Three phase) Per phase isolation |
| 40 | 2+12 Way |
| 41 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required |
| 42 | RJ-11 telephone jack single two line |
| 43 | 5 step fan regulator 2 Module |
| 44 | Blanking plate |
| 45 | 32 Amp. 2 Moduleswitch With Indicator |
| 46 | 25 Amp. 2 Module Socket |
| 47 | P & F following size hot dip galvanized M.S. box with earthing terminal in recess/ surface suitable for modular accessories as required. |
| 48 | 1-2 Module |
| 49 | P & F following size mounting grid plates with cover plates |
| 50 | 1/2 Module |
| 51 | P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make.Outer Dia. / Inner dia. |
| 52 | 50/55 mm |
| 53 | 90 / 76 mm |
| 54 | P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . |
| 55 | P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceilingfan complying to IS374:1979, I/P 50 watt at max. speed & 230 volt, >210 CMM air delivery, speed >330 RPMwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. |
| 56 | P&F of Heavy duty capacitor start, Double ball bearing900/1400 RPM single phase ISI marked Exhaustfan,IS:2312 marked in existing opening including making connections testing etc. as required. |
| 57 | 300 mm sweep(900/1400 RPM) |
| 58 | 380 mm sweep(900/1400 RPM) |
| 59 | P & F of Gravity Louver shutter of superior quality made out of frame of18 swg M.S. sheet & Louvers made from 24 swg MS Sheetwith enamel paint including cost of nuts, bolts, etc as reqd. |
| 60 | Up to 380 mm size |
| 61 | P & F heavy duty, Double ball bearing and with sturdy mesh guard; Aluminium alloy one piece blade wall mounting oscillating type air circulator conforming to IS:2997, including fixing with anchor bolts, regulator making connection testing etc. as required. |
| 62 | 450 mm sweep With three speed regulator |
| 63 | SITC of wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel made out of CRCA sheet , required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shadeThe panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shallnot be less than 1.6 mm up to 600 mm length / widthof any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall beof 2.0 mmthick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / withoutdetachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) |
| 64 | Supplying and fixing of Aluminium / Copper bus barby means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. |
| 65 | Electrolytic grade Aluminium bus bar |
| 66 | SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. |
| 67 | Digital type |
| 68 | SF of CT operated direct reading typeAmpere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. |
| 69 | Digital type |
| 70 | Below 500 A |
| 71 | SF ofCurrent Transformer, with all necessary support in existing panel including connection etc. as required . |
| 72 | up to 150 / 5 Ratio , 5 VA , class 1 accuracy |
| 73 | SF of110/220 V, LED (22.5 mm dia ) Indicatinglamp with integral circuit, terminal block, including connection etc. as required. |
| 74 | Red/yellow/Green colour |
| 75 | Blue colour |
| 76 | SITC of quick make and quick break4 POLEcurrent limiting MCCB having following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push( test) to trip , including making connections with lugs & spreaders,etc. as required. |
| 77 | With Thermal Magnetic release |
| 78 | up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 79 | 160 Amp, 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 80 | 250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 81 | P/Laying P.V.C./ XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. |
| 82 | 6.0 Sq.mm |
| 83 | 4 core |
| 84 | 10.0 Sq.mm |
| 85 | 4 core |
| 86 | 16.0 Sq.mm |
| 87 | 4 core |
| 88 | 35.0 Sq.mm |
| 89 | 3.5 core |
| 90 | 95.0 Sq.mm |
| 91 | 3.5 core |
| 92 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. |
| 93 | 3.5 x 95.0 sq.mm |
| 94 | 4 x 6.0 sq.mm |
| 95 | 3.5 x 35.0 sq.mm |
| 96 | 4 x 10.0 sq.mm |
| 97 | 4 x 16.0 sq.mm |
| 98 | S&F of 36 Watt IP 20 LED 2"x2" fixture,Recessed / surface type,having efficacy of not less than 100 lumen / watt , made out from CRCA housing andwith high purity / transmisvity duffuser for uniform light distribution high efficiency driver electronics and incompliance to IEC standard (integral with light fixture) , life time of more than 50000 burning hours, CCT 6000K (minimum), CRI>80 driver maintaining PF>0.9 |
| 99 | S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. |
| 100 | 32 mm Dia. |
| 101 | P&F of IP65 protected LED Street Light Luminaire on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover ( from 45W onwards ) and should besecondary lens on each LED .The System level Luminaire efficacy >=100with High Power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOULmake is to be used .TheLED Driver shall be BIS certified and Input Voltage AC 110 to 270 V AC with Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% , THD(I) <10%Humidity 10% to 90% RH Working Temp -20C to 50C .Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% initial lumens maintained ,Rendering Index >75% .Surge protection shall be min = 5 KV internal and min 10 KV external.Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianed. |
| 102 | LED Street Light fixture 70 Watt |
| 103 | Supply & FixingISI marked( IS : 15683 )Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, completein all respects includinginitial fill and wall suspension of following capacity. |
| 104 | 4 kg |
| 105 | P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non- Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2"5 KV surge BSVo and in comPliance to IEC standards. System Lumen efficacy of > 1.00 lm /wattand life time of minimum 35000 Burning Hours with 700/o of intial Lumen maintaned, CCT 3000"K / 4000"K / 6000"K , maximum Power consumption should not more than the specified rating and Fixture shall be of CE complianed. |
| 106 | LED Downlight 18/20w |
| 107 | P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC. |
| 108 | P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and enamel paint including cutting, welding, holes etc.of following sizes as required. |
| 109 | 50mm x 50mm x 6mm |
| 110 | Maintenance free Gel EarthingwithPipe in pipe / Pipein striptechnologyfilled with anti corrosive conductive compound ( CPRI Tested )below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineralfillingcompound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone) and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. |
| 111 | With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating |
| 112 | GI pipe 3000 mm long, 50 / 25mm, Terminal 14 mm GI Strip |
| 113 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 114 | 8 SWG G.I. ( Hot Dipped) Wire |
| 115 | 25mm x 3mm G.I. ( Hot Dipped) Strip |
| 116 | Supply and erection of GI Octagonal / Conical pole of following length and dimension as per table E-10 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS: 1367 P III ).The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. |
| 117 | Octagonal MS Polesmade of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. (See Table E - 10 for specs.) |
| 118 | 9 Mtr. |
| 119 | P & F ofIP-65 protected high power LED flood light system with Pressure diecast aluminium housing , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED fixturesupplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards/BIS certified. The System level Luminaire efficacy >=100with High Power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOULmake is to be used . LED Driver Input Voltage AC 110 to 270 V AC with Auto resetting Safety Cut-off. Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% ,Control Gear Integral Design, THD(I) <10%,. Electrical Connector Must be provided Surge Protection Min >=5KV internal and 10KV external in 80W onwards,Humidity 10% to 90% RH Working Temp -20C to 50C . LED Luminaire Specifications: Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% lumen maintenance.Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianed. |
| 120 | High Power LED Flood Light 350W |
| 121 | S & Laying following size" B " class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required |
| 122 | 100 mm dia. |
| 123 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. |
| 124 | 2.5 Sq.mm 3 core flat / Round |
| 125 | SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering ofriser pipe, G.I./H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. |
| 126 | 10.0 HP, 3-Ø, (64-104)Mtr, (400-167)LPM |
| 127 | 5.0 HP, 3-Ø, (32-52)Mtr, (400-167)LPM |
| 128 | SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. |
| 129 | Non Self priming pumps |
| 130 | 10 HP, 3-Ø, (6-28)Mtr, (45-7.5)LPM |
| 131 | Supply and fixing of Oil / Air break Starter panel made out of sheet steelpowder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors. |
| 132 | For Three phase Submersible / Mono block pump |
| 133 | 3.0 HP to 10.0 HP ( Star / Delta ) |
| 134 | Supply & fixing of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia complete in all respect ISI make. |
| 135 | B class 32mm dia |
| 136 | B class 50mm dia |
| 137 | Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings |
| 138 | for vertical installation |
| 139 | 63 mm OD6 kg / cm2 |
| 140 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. |
| 141 | 6.0 Sq.mm 3 core flat / Round |
| 142 | 10.0 Sq.mm 3 core flat / Round |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
