|
| 1 | Excavating in post holes in hard / dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete |
| 2 | M&L for cement concrete type C2 1:3:6 (using 40mm graded aggregates) in foundation, filling and mass concrete complete |
| 3 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) in kerb stone, fencing kerbs for chamfered angles and throating including required formwork as directed complete |
| 4 | S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting, embedding in cement concrete, MS flat at bottom etc and similar work confirminng to Fe-290 Gde E-165 complete |
| 5 | S&F MS flats (40x6mm) as bands, straps, supports or stays for securing chain link fencing to angle iron postsand welded to post in PCC during embedding complete |
| 6 | S&F for mild steel round bars 10mm dia and over, cut to length, bent to shape required conforming to Fe-410W Gde E-250 complete |
| 7 | S&F Mild steel screws bolts (machine made) with hexagonal or square heads at one end and screwed at the other end, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long and dia diameter of neck 5 to 10mm complete |
| 8 | Supply only chain link MS galvanised fencing any size or type (mesh size 50mm and dia of wire 4mm) complete |
| 9 | Fixing only chain link, fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete |
| 10 | M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete |
| 11 | M&L for preparation of new or previously untreated steel or iron surfaces of any description n.exc10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete |
| 12 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard / dense soil complete |
| 13 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.0 |
| 14 | Removal excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete |
| 15 | M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation, filling and mass concrete complete |
| 16 | M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6. Complete all as specified and directed. |
| 17 | M&L for precast cement concrete block masonry not exceeding 15cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6. |
| 18 | M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for or column, hooking ends etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete |
| 19 | All as per item No 18 above but 8 to 10mm dia as in stirrups spaces and binders |
| 20 | Use & Waste of formwork to rough finished flat surfaces of lintels and similar works complete all as specified and directed. |
| 21 | M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) forroof beams and lintels complete |
| 22 | M&L for 15mm thick rendering in CM 1:6 over brick / conc wall surfaces and sagol finished for internal wall surfaces complete all as directed. |
| 23 | All as item No 22 above but in CM 1:4 for external wall surfaces and sponge finished complete all as directed. |
| 24 | S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of \"JINDAL\" or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. |
| 25 | S&F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of \"JINDAL\" or of equivalent make and rubber beading etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352. complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, balluster, railing frame work for securing water tank,and similar work conformed to Fe-410 or 310-0 complete |
| 27 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples. |
| 28 | S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles.MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails.MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC \"C\" channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thickprelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II.The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II.Each PVC door shutter leaf consist of 4 Nos 100 mm long MSbutt hinges. complete all as specified and directed. |
| 29 | S&F Factory madewood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mmprelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed. |
| 30 | S&F 150 mm extruded aluminium alloy handles fabricated type. |
| 31 | S & F Aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed |
| 32 | S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed complete |
| 33 | S&F butt hinges 100mm, medium weight cold rolled mild steel complete. |
| 34 | M&L for 20 to 25mm thick machine cutKota stone (550 x 550 mm) flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 15mm thick screed bed in CM 1:6 complete |
| 35 | M&L for coloured designer glazed ceramic tiles of size 300x600x7mm thick as in vertical surfaceset and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete. |
| 36 | M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floor subbase complete |
| 37 | M & L for 50mm thick cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 38 | M&L for for preparation newly plastered surfaces of walls and applying three coats of white wash complete all as specified |
| 39 | M&L 20mm thick granite (of any type) work table rubbed and pre polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete |
| 40 | S&F rotational moulded polythylenewater storage tank 500 ltr capacity (Cylinderical vertical with closed top) with tank nipple 20mm bore hoisted and fixed in position complete all as specified |
| 41 | S&F 20mm bore ball brass valve, high pressure with polythene float and fly nut completescrewed for iron pipe or brass ferrule complete all as directed |
| 42 | S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete |
| 43 | S&F 15mm bore chromium plated bib cock fancy type complete all as specified |
| 44 | S&F PVC (SWR)Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed |
| 45 | S&FPVC (SWR)gully trap 150 x 100 quare or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed |
| 46 | Supply and fixing sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 47 | S&F PVC(SWR) Coupler 75/110 mm dia complete |
| 48 | M&L for 9 mm thick one side laminated gypsum ceiling board for false ceiling onaluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and \"J\" bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, and applying three coats of white wash. |
| 49 | Surface excavation n.exc (not exceeding) 30 cmdeep and averaging 28 cm deep and getting out in soft/loose soil |
| 50 | M&L for hard core of broken bricks gauge n.exc 63mm, deposited spread and levelled I layers n.exc 15cm thick, watered and rammed to a true surface under floor, plinth protection etc complete |
| 51 | M&L for machine pressed precast concrete rubber moulded glossy interlocking paver blocks any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade setted with grey cement and no pigments complete |
| 52 | M&L for sand filling under floors or in foundations including watering and consolidation complete |
| 53 | Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete |
| 54 | M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcementcomplete |
| 55 | M&L for provinding cement concrete (1:2:4) B-1 as in copings / bearing course over brick walls etc and like complete all as specified. |
| 56 | M&L for cement concrete 1:3:6 type C2 (40mm graded stone aggregates) as in surface channels and drains complete |
| 57 | Extra for forming fair finished drain or channel inner girth n-exe 30cm in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete |
| 58 | M & L surface excavationn. exc 30cm deep and averaging 15cm deep and getting out Soft/loose soil Complete all as specified |
| 59 | M&L broken hard core of broken stone or border gauge, n exc 63mm deposited spread and leveled in layers n.exc 15cm thick water and rolled/rammed true surfaces. Complete all as specified |
| 60 | M&L for 100mm thick PCC type D2 1:4:8 (using 40 mm graded stone aggregate) in Sub base including finishing cement concrete even and smooth. Complete all as specified |
| 61 | M&L for 100mm thick PCC type B1 1:2:4 (using 20 mm graded stone aggregate) in floor including finishing cement concrete even and smooth without using extra cement with broom finish Complete all as specified |
| 62 | M & L Forming Construction joint 30mm deep x10mm wide filled with sealing compound grade B |
| 63 | M & L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified |
| 64 | M&L rendering 10mm thick inCM 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement. |
| 65 | M&L forPCC 1:2:4 type B0 ( using 12.5 mm gradedaggregates) as in copping,kerb, bed block complete all as specified |
| 66 | M& L PCC 1:2:4 B1 ( using 20 mm gradedaggregates) in surface channels and drainscomplete all as specified |
| 67 | Removal of excavated material soil exc 1.50 KM. & n exc 5 KM & depositing out side of MOD Land etc complete all as specified |
| 68 | M & L precast cement concrete type B1 (using 20mm graded aggregate) in window or door cills,lintels, bressumers,steps, quoin blocks (for use with masonry), string courses and manhole cover set in cement mortar 1:6 etc complete all as specified and directed |
| 69 | M& L RCC(Nominal mix) type B1, 1:1.5:3 (using 20 mm graded stone aggregate) for Foundations, including rafts, footings,plinth beams, bases for columns, etc. complete all as specified. |
| 70 | M& L RCC(Nominal mix) type B1, 1:1.5:3 (using 20 mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like |
| 71 | M&L rendering 15 mm thick on stone masonry surfaces other than fair faces of brick work or stone surfaces in CM 1:6 |
| 72 | M&L rendering 10 mm thick on stone masonry surfaces other than fair faces of brick work or stone surfaces in CM 1:6 |
| 73 | M&L for Preparation ofNew plasteredsurfaces of wall and applying two coats ofoil bound distemper including a coat of primercomplete all as specified anddirected. |
| 74 | M&L for Preparation ofnewly plasteredsurfaces of wall and applying two coats ofcementbase paint complete all as specified anddirected. |
| 75 | S&F MS work as in Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Wind ties etc grade Fe-410-W Quality A |
| 76 | Use & Waste of form work to side of concrete foundation, footing, base of column raft and raft beam, and plinth beams and similar work of rough finish. |
| 77 | Use & WasteFormwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide |
| 78 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified an directed |
| 79 | M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface setand jointed in neat cement slurry andpointed flush in white cement with pigmentover and including 10mm thick baking coat of CM 1:3 complete all as specified. |
| 80 | M&L for non skid ceramic coloured tiles 300 x 300 x 7 to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete. |
| 81 | M&L for 75mm thick PCC type C2 1:3:6 in plinth protection/Path finished the surface even and smooth without using extra cement complete all as specified anddirected. |
| 82 | M&L for rubber moulded glossy chequered cementconcrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 complete |
| 83 | Supply and fixedrotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 1000 Litres capacityhoisted and fixed in position and connecting up pipes and securing access covers all as specified and directed |
| 84 | S&F GI tubing\"medium grade\" galvanized with all fittings and fixed complete to walls and ceilinng or laid in floors, trenches etc complete. |
| 85 | 15mm dia bore |
| 86 | 20mm dia bore |
| 87 | Cutting chases, pinning in making good to facings where required and pointingin CM 1:4 for consealed water tubing etc complete |
| 88 | M&L PVC (SWR) floor trap with steel grating 75 mm dia including jointing to waste pipe including removing old traps complete. |
| 89 | M&L110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors as specified and directed |
| 90 | M&L75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors as specified and directed |
| 91 | S&F PVC (SWR) bends110 mm bore of any radiaus |
| 92 | S&F PVC (SWR) bends 75mm bore of any radiaus |
| 93 | S&F 150 mm extruded aluminium alloy powder coated handles ,fabricated type. |
| 94 | S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long all as specified and directed. |
| 95 | Supply & fixingaluminium alloy anodisedsliding door bolts with hasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded sectionof 250mm long all as specified. |
| 96 | S&Fvitreous china squatting pan \"ORISSA\" pattern size 580 mm x440 mm, white with integral foot rest including cast iron \"P\" or \"S\" trap andconnection to trap includintg cement concrete, with and etc. including making good to floor, complete all as specified |
| 97 | S&F vitreous china pedestal pattern, white with including cast iron \"P\" or \"S\" trap andconnection to trap includintg cement concrete, seat cover and jet spray etc. including making good to floor, complete all as specified |
| 98 | S & F 15 mm chromium plated 2 way bib cock with wall flange confirming to CAT No. F2002161 of \" Cera\" or of equivalent make specified here in after. |
| 99 | S & F Health faucet conforming to CAT No. ALD-573 as mentioned of make \"Jaquar\" or of equivalent make specified here-in-after |
| 100 | S&F10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete |
| 101 | S&F 15mm bore chromium plated angle cock fancy type complete all as specified |
| 102 | S&F PVC connection 60cm long 15mm dia, with 2 Nos CP brass check nuts all as specified. |
| 103 | S&F 15mm bore chromium plated bib cock fancy type complete all a specified an directed. |
| 104 | S&F 15mm bore chromium plated pillar cock fancy type complete all a specified an directed. |
| 105 | S&F vitreous china flat back type wash basin, white of size 550 x 400 mm including bracketscomplete all as directed |
| 106 | S&FPTMT waste fitting 32mm bore for WHB/sink complete all as specified. |
| 107 | S&F 32mm bore and 750mm long PVC wastepipe for WHB complete all as specified and as directed. |
| 108 | Cutting into exising manhole for connecting new drain making good to pipe and rendering cutting out existing benching for and formaing benching channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required |
| 109 | M&L for cement concrete 1:4:8 type C-2 in concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested |
| 110 | M& L Reinforced concrete pipes, 150 mm dia class NP2, laid and jointed complete with collars complete all as specified and directed |
| 111 | M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 markeddrawn through duly concealed in wall /roof/ floor along with suitable feetings, with modular MS sunken boxes of 1.6 mm thick, of suitable size including modular cover plate/frame for housing modular switches/sockets ISI marked along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dollyall as specified for the following : |
| 112 | (a) One light/fan point controlled by one, one way switch |
| 113 | (b) One 3 pin 5 A socket outlet point controlled by one No one way switch on same board |
| 114 | S & F for moduler Switch piano, flush type single pole, one way 6Amp all as specified. |
| 115 | S & F for moduler Socket outlet 2 in 1, 3 pin, 6Amp complete all as specified. |
| 116 | S & F for ceiling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified. |
| 117 | S & F for MCB DB SPN sheet metal enclosure 4 way with 200 amps rated bus bar double door, fixed on wallmaking good to disturbed surfaces and connecting with existing cable complete all as specified. |
| 118 | S & Ffor MCB Double Pole rated capacity 32 amps, 240 V breaking capacity 10 KA ,B- curve complete all as specified. |
| 119 | S & Ffor MCB Single Pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,B- curve complete all as specified. |
| 120 | S & F exhaust fan of sweep 300mm with louver heavy duty single phase suitable for 230 volts 50 HZ,1400 rpm and connecting up complete including provision of 3 core flexible cord from ceiling rose to connector of fan with cable of suitable size.Make :- Bajaj, Item Code - 70068 SUPREME PLUS or Equivalent makes specified here in after. |
| 121 | Supply and fix LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 20 W LED complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable ofsuitable size from ceiling rose to connector. Conforming to Cat Part No.ENDURALINEARNEOBS20WLED865SPCWH Make :- Havells or equivalantin other approved makes. |
| 122 | S & FLED energy efficient Security light fitting 18 Watt LED, pressure die cast aluminium housing in heat resistant glass covered with IP 65 Protection and including GI pipe as required length and size with fixing accessories complete all as specified and directed. Make - Bajaj Cat Part No. ENXTP18LWHSYPCSDor Equivalent in other approved makes. |
| 123 | S & F LEDlight of cap 10 W,engineering plastic batten with white acrylic coverwith complete accessories all as specified. Make- Bajaj. Cat part no - BCLSB 10 WH or equivalent in other approved makes. |
| 124 | M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (Note:-GI earth strip and protection pipe beyond 7.5m will be measured and paid separately) |
| 125 | M & L for Reinforced concrete pipes class NP 2 with one collar per length of pipe of dia 100 mm 2 nos half round (for bottom and top ) and before laying excavated area shall be leveling all as specified. |
| 126 | M & Lfor Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core , from DB/Panel to sub DB/ main board complete all as specified and as directed. |
| 127 | S & F for MCB DP ofrated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and as directed. |
| 128 | S & F GI Pipe medium grade for protection of cable 25mm dia with necessary fixing arrangements all as specified and directed. |
| 129 | Cutting existing steel tubing for alteration or addition of size 20 mm complete all as directed. |
