Construction Of Jan Suvidha Kendra At Mhasla Bk Taluka And Dist Buldana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jun 2022
0 days left
EMD
27000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mhasla → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Jan Suvidha Kendra At Mhasla Bk Taluka And Dist Buldana
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ra |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 5 | Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water,Steel centeringformwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 8 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction f |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed desi |
| 12 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. |
| 13 | Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every th |
| 14 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 15 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 16 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 17 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long |
| 18 | Providingandapplyingplasterwithplasterofparisin6mmthicknesstopreviouslyplastersurfaceinallpositionincludingpreparingthesurface scaffolding etc. complete |
| 19 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 20 | Providingsandfacedplasterexternallyincementmortarusingapprovedscreenedsand,inallpositionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofingcompoundat1kgpercementbagcuringthesamefornotlessthan2daysandkeepingthesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mmthickincementmortar1:4finishingthesurfacebytakingoutgrains and curing for fourteen days scaffolding etc.complete |
| 21 | Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring |
| 22 | Providingandlayingmattfinishceramictilesofhavingsize30cmx30cmconfirmingtoI.S.15622/2006(groupDII-A)and7to8mmthickforflooringinrequiredpositionlaidonabedof1:4cementmortarincludingcementfloat,fillingjointwithwhite/colourcementslurrycleaning curing etc. complete |
| 23 | Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. |
| 24 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 25 | Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box |
| 26 | Providing and fixing in position factory made box type fully glazed window consisting of cold rolled section of 105mm x 60mm x 1.25mm thick frame section filled with cement concrete (1:2:4) and steel section F4B as per detailed drawing and design including mild steel 12mm square bars at 10cm center to center, required F7B section, section T6, section for shutter frame (Louvered clips in case of Louvered window portion) and 3mm thick glass of approved quality of necessaryfixtures and fastening, finishing with one coat of anticorrosive paint etc. complete . |
| 27 | Providingandfixingsingleordoubleleafpanelleddoorshutterexcludingframewithglazedopenablefanlightshutter35mmthickasperdetaileddrawingconsistingpanelledverticalstyles100mmx35mmandlockandbottomrail200mmx35mmandpanels12mmthick both side commercial ply faced particleboardincludingstainlesssteelfixturesandfasteningandT.W.beadingatjunctionsofpanelinsertsandasinstructedbytheEngineerincharge including 3 coats of oil painting etc. complete. |
| 28 | Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 29 | Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 kg/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats I |
| 30 | Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 31 | Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing |
| 32 | Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and |
| 33 | Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. |
| 34 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and |
| 35 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. |
| 36 | Providing, laying and fixing P.V.C. pipe of 20mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the |
| 37 | Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking |
| 38 | Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the |
| 39 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern wi |
| 40 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclus |
| 41 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as direct |
| 42 | Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaningetc. complete. |
| 43 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted |
| 44 | Providingandlayingceramictilesofhavingsize30cm.x30cm.andconfirmingtocorrespondingI.S.fordadoandskirtinginrequiredpositionwithreadymadeadhesivemortarofapprovedqualityonplasterof1:2cementmortarincludingjointfillingwithwhite/colourcement slurry cleaning curing etc. complete |
| 45 | Providingandapplyingthreecoatsofwaterproofcementpaintofapprovedmanufactureandofapprovedcolourtonewplasteredsurfacesincludingscaffoldingifnecessary,cleaningandpreparingthesurface, watering for two days etc. complete |
| 46 | Providingandfixing15mm.diaBallcockmediumtypewithPVCfloatincludingsocketsandnecessaryfittingsandtestedaspermunicipalrequirement etc. complete. |
| 47 | Providingandfixingmildsteelgrillrailingweighing15kg/sqm.withPVChandrailcoverandnewelpostforstaircases,includingfabricating,fixtures,drillingholesinconcrete/othersurface,erectingthegrillwork,necessarywelding,fixingbynutsandbolts,fixingPVChandrailcover,withonecoatofanticorrosivepaintandtwocoatsofoilpaintingwithapprovedcolourandshade,remakingthedamagedsurface, cleaning, etc. complete. Spec. No. : As directed by Engineer in charge |
| 48 | Providingandlayingchequeredtilesofapprovedqualityofsize30cmx30cm,confirmingtocorrespondingI.S.forflooringinrequiredpositionlaidonabedof1:4cementmortarincludingcementfloat,filling joint with cement slurry cleaning curing etc. complete |
| 49 | Providingandfixinginpositionpowdercoatedaluminiumlouveredwindows/ventilatorofvarioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincludingaluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,ofapproved quality etc. complete. |
| 50 | Providingandfixingchromiumplatedtowelrod16mmdiaand75cm.in length including all accessories complete. |
| 51 | ProvidingandfixinginpositionUPVCultravioletstabilized110mmouterdiametercowldomeconfirmingtoI.S.-4985includingmakingjoints with solvent cement etc. complete |
| 52 | Providingandfixingcollapsiblesteelgateinone/twoleaveswithhotrolledverticalchannelsof18x9x3mmminimumsize,crossingsofM.S.flatsofsize18x5mmTorEsectionforrunnerofminimum40x6mmsizeforflange,M.S.flatfortoprunnerofminimumsize40x12mmwithrollerwheelsconfirmingtogradeF.G.150fittedwithsnapheadedrivetsofminimumsize6mmmax.spacingofverticalchannelsbe100mmenclosedgatepositionandclearspaceof150mmbetweentwosetsofcrossingswithholdfasts,stoppers,spaces,handles,lockingarrangementandonecoatofredleadprimerandoilpainting etc. complete. (I.S. 105211983). |
| 53 | Providingandfixingframewith/withoutventilatorofsizeasspecifiedwithCountrycutteakwoodfordoorsandwindowsincludingchamfering,rounding,rebating,ironholdfastofsize300mmx40mmx5mm with oil painting, etc. complete |
| 54 | Providingsillsofrequiredmaterial20mmto25mmthick,onabedofcementmortar1:4includingcementfloat,fillingjointswithneatcementslurry,curing,mouldingedges,polishing,cleaningcomplete.b) Granite |
| 55 | Providingandlayinginwalls/ceilings/floors15mmdia.mediumgradehavingembossedasISIMarkgalvanisedironpipesof1.25kg/metrenecessaryfittingremakinggoodthedemolishedportionwithfillingtrenchesandwithprimerofanti-corrosiveoilpaint,2coatscomplete.IncludingnecessaryscaffoldingandremovingexistingpipelineifnecessaryandconveyingandstackingthesameinPWDchowkyorasdirected etc. complete. |
| 56 | Providingandlayinginwalls/ceilings/floors25mmdia.mediumgradehavingembossedasISIMarkgalvanisedironpipesof2.49kg/metrenecessaryfittingremakinggoodthedemolishedportionwithfillingtrenchesandwithprimerofanti-corrosiveoilpaint,2coatscomplete.IncludingnecessaryscaffoldingandremovingexistingpipelineifnecessaryandconveyingandstackingthesameinPWDchowkyorasdirected etc. complete. |
| 57 | Providingandlayingintrenches15mmdai.CPVCpipeincludingnecessaryexcavation,fittings.Refillingtrenchesetc.completeIncludingremovingexistingpipelineifnecessaryandconveyingandstacking the same in PWD chowky or as directed etc. complete. |
| 58 | Providingandlayingintrenches20mmdai.CPVCpipeincludingnecessaryexcavation,fittings.Refillingtrenchesetc.complete.Includingremovingexistingpipelineifnecessaryandconveyingandstacking the same in PWD chowky or as directed etc. complete. |
| 59 | Providingandlayingintrenches25mmdai.CPVCpipeincludingnecessaryexcavation,fittings.Refillingtrenchesetc.complete.Includingremovingexistingpipelineifnecessaryandconveyingandstacking the same in PWD chowky or as directed etc. complete. |
| 60 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 61 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 62 | Providingandlayingvitrifiedmirror/glossyfinishtileshavingsize590mmto605mmx590mmto605mmof8to10mmthicknessandconfirmingtoIS.15622-2006(groupBla)ofapprovedmake,shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4cementmortarincludingneatcementfloat,fillingjoints,curingandclearing etc. complete |
| 63 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mmaggregatespremixedwithbituminousbindertransportedtositewithVTS,laidoverapreviously preparedsurface,finishedtothereq |
| 64 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushedstonechiping6.7mmsizeandpenetrationbitumenofspecifiedgrade@1.2kg/Sq.m, preparing existing road surface by mechanical mea |
| 65 | 1 Standard Consistancy Fineness,Specific Gravity , Setting time (Initial and Final) Compressive Strength , soundness |
| 66 | 1 Compressive strength of CC Cubes (Set of three cubes) |
| 67 | 1 seive analysis |
| 68 | 2 liquid limit and plastic limit |
| 69 | 2 Seive analysis |
| 70 | Compressive strength of bricks (Set of five bricks) |
| 71 | 1 Fineness Modulus ( seive anlysis)Silt and clay content |
| 72 | 2 Silt factor |
| 73 | Extraction test |
| 74 | Royalty Metal Murum |
| 75 | Royalty Sand |
AI Tender Summary
Tender Timeline
Jun 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender