Small Industries Development Corporation Limited has published Supply And Installation Of Furniture Items For National Institute Of Fashion And Technology At Ompora Budgam Jk Supply And Installation Of Furniture Items For National Institute Of Fashion And Technology At Ompora Budgam Jk , Note: Contractor Should Quot. Submission Date for this Tender is 02-07-2022. Uniform Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Jun-2022 | Layout plan | Other | 30-06-2022 |
| 2 | 20-Jun-2022 | Extension of Dates | Date | 30-06-2022 |
| 3 | 29-Jun-2022 | Corrigendum | Date | 02-07-2022 |
| 4 | 02-Jul-2022 | dates | Date | 04-07-2022 |
| Sl. No. | Item Description |
| 1 | Note: Contractor should Quote Rates with all taxes. |
| 2 | Seminar Hall Table Size : 1350x500x750mm2 Seater Supplying and placing in position a Seminar table Size : 1350x600x750mm 2 Seater having Understructure of legs fabricated by Argo Shield welding MS ERW Tube 50 mm x 25 mm x1.2mm thk , 40 mm x 20 x 1.2 mm thk (as per IS: 7138 ERW) with the base of the MS tube isfitted with a Glide plate 5mm thk HR (as per IS : 2062) over which a straight M8 leveler isfitted with bottom translucent cap ,which allows for adjustment of the height by 50mm,support brackets 3 mm thk HR (as per IS : 2062)welded on top side of Leg for fixing top.Wire Management : Metal powder coated power box with wire raiser is given to pull wires from the floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop above power box cut out for accessing switches.MODESTY PANEL: Worktop mounted metal modesty made from 0.8 mm thk CRCA (IS: 513) is provided. Internal tapped stud is welded to the modesty for mounting.Worksurface -out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 mm w x 600 mm d.All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. |
| 3 | Drawing table (Overall Size :-900(W)x750(D)x750(H) adjustable table Topwith tilt mechanismTop Made in 18MM Thickness PFT MDF (900mmX750mm).With Adjustable top Footer 18MM Thickness MDF (900mmX250mm).Beam 1.2mm Thickness Rectangle pipe (40x20)mm. Legs 1.2mm Thickness Round pipe Frame 38 Dia Paper Stopper 1.2mm Thickness 610mm width X 30mm Height.Leveller 4 PC. |
| 4 | Drawing Table: Size : (Overall Size :-900(W)x600(D)x750(H) Top Made in 18MM Thickness PFT MDF (900mmX600mm).With Adjustable top Footer 18MM Thickness MDF (900mmX250mm).Beam 1.2mm Thickness Rectangle pipe (40x20)mm. Legs 1.2mm Thickness Round pipe Frame 38 Dia Paper Stopper 1.2mm Thickness 610mm width X 30mm Height.Leveller 4 PC. |
| 5 | Drawing table (Overall Size :-1315(W)x750(D)x750(H) adjustable table Topwith tilt mechanism Made in 18MM Thickness PFT MDF (910mmX750mm).With Adjustable top Footer 18MM Thickness MDF (900mmX250mm) attached with side drawer of 425 (w) x 600 (d) x 625 (H) with three drawers .Beam 1.2mm Thickness Rectangle pipe (40x20)mm. Legs 1.2mm Thickness Round pipe Frame 38 Dia Paper Stopper 1.2mm Thickness 610mm width X 30mm Height.Leveller 4 PC. |
| 6 | Drawing Table: Size : (Overall Size :-1200(W)x600(D)x750(H) Top Made in 17MM Thickness BWR ply and1mm thick laminitae exposed all side should be covered with finishedwooden beading(1200mmX600mm).Withrack shelf at 150 mm down from top level17MM Thickness BWR ply and1mm thick laminitae exposed all side should be covered with finishedwooden beading(1200mmX600mm).Beam 1.2mm Thickness Rectangle pipe (40x20)mm. Legs 1.2mm Thickness Round pipe Frame 38 Dia Paper Stopper 1.2mm Thickness 610mm width X 30mm Height.Leveller 4 PC. |
| 7 | STUDY TABLE Overall size: 900mm Length x 600mm Depth x 750mm Height. Top of the table should be box type and made out of 17 mm thick pre-laminated MDF board.The box type top should be 125mm high including top and bottom. The box type top should be provided with single drawer of 400mm width on right hand side and rest area shall be open for keeping books or note books. The handle of the drawer shall be in stainless steel or aluminium. Frame of the study table should be made of 50x 25 x 1.2mm CRCA pipe and provided with foot rest of 50x 25x 1.2 mm thick and shall be tapered. All the steel components should be pre-treated for de-greasing, de-rusting and phosphating. After proper pre- treatment, the steel components should be epoxy powder coated and oven baked at temp. above 200 deg. C to provide scratch resistance surface coating film thickness 45-50 microns |
| 8 | Computer Workstations Size: 900mmX600mmX750mm Supplying and placing in position a Computer Workstations Size: 900mmX600mmX750mm The system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates.These leg structure shall be in M.S. CRCA sheet/ tubes/rodsfinished with epoxy power coating of the approved colour as per the project designer. These legs are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. The terminating legs can be provided with modesty panels optionally. T of Metal 1.2 mm thick CRCA. The legs shall be provided with translucent glide screws to take care of the levelling as per the site requirements Worktop shall be made of 25MM thick Pre-Laminated BoardAll the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. Access flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. Wire management shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Provision for separation of Data and power cable shall be provided in the selected option. Wire riser leg or independent wire risers shall be provided as per the layout structure. All the wire management components shall be of MS sheet with varying thickness as required to support and form a sturdy understructure to carry wires. Screen shall be provided as per the requirement of the design and layout.Fabric screens shall be of 19 mm overall thick,The screens provided shall be complete with its set of PDC clamps for fixing on the worktop. The fabric screens could be optionally provided as removable screens also.The screens shall be placed along the width of the worktop. For aisle side workstations it shall be along the edge of the worktop while it shall be centrally placed for the Back to Back workstations. Clip on screens can be provided optionally along the depth of the worktop. |
| 9 | Medium Mesh Back Revolving Chair Overall Dimensions Seat Height - min 43.3 to max 54.3cm, Height - min93.5 to max 104.5cm,Seat upholstered with fabric upholstery , The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene,60° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment, The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors |
| 10 | Non Revolving Mesh backChair Overall Dimensions of Chair shouldbe Seat Height - 46.5cm, Height - 93.5cm, Backupholstered using Net fabric with high tenacity yarn,One-piece armrests injection moulded from black Co-polymer Polypropylene The powder coated (DFT 40-60 microns) tubular framecantilever type & made ofdia 2.54±0.03cmx0.2 ±0.016cm.thk. M.S. ER.W. Tube. |
| 11 | Sofa2 Seater Size: Width: 134cmDepth : 87cmHeight : 76cm ,Leatherette Upholstery, Wooden Frame |
| 12 | Sofa3 Seater Size:Width: 175cmDepth : 87cmHeight : 76cm Leatherette Upholstery, Wooden |
| 13 | Center Table Size : 1200x600x450mm made of ss frame + Glass Top . The Centre table glass top should be of 8 mm thicktoughen glass of black shade . Frame should be made out of satinless steel rectangular hollow pipe of size 40 mmx 9mm wide and 20 mmx 9mm pipe . Provided with a bottom shelf of 8 mm thick of black shade . |
| 14 | Corner Table Size : 450x450x450mm made of ss frame + Glass Top . The Centre table glass top should be of 8 mm thicktoughenglass of black shade . Frame should be made out of satinless steel rectangular hollow pipe of size 40 mmx 9mm wide and 20 mmx 9mm pipe . Provided with a bottom shelf of 8 mm thick of black shade .(refernece pic shown in item should be read as per the sizes mentioned above 450x450x450mm. |
| 15 | Sofa2 Seater Size: Width: 134cmDepth : 87cmHeight : 76cm ,Leatherette Upholstery, Wooden Frame |
| 16 | Sofa3 Seater Size:Width: 175cmDepth : 87cmHeight : 76cm Leatherette Upholstery, Wooden |
| 17 | Center Table Size : 1200x600x450mm Providing & placing center table , top & a shelf made of 18mm thick prelaminated partical board duly edgebande with MS square pipe frame |
| 18 | Corner Table Size : 600x600x450mm Providing & placing center table , top & a shelf made of 18mm thick prelaminated partical board duly edgebande with MS square pipe frame |
| 19 | LIBRARY TABLE Overall size: 1800mm L x 900rnmD x 750mm Ht Top of the table should be made out of 25 mm thick pre- laminated particle board All the exposed edges of the table top should be protected with 2mm thick PVC edge banding tape affixed with hot melt glue. Four legs should be made of 50mm square 1.2mm thick CRCA pipe. Cross section should be made of 40x 40x 1.2 mm thick CRCA pipe. Table top should be provided with pipe frame support fitted longitudinal or length wise below the table top. These two metal pipe supports should be made of 40x 20 x 1.2 mm thick CRCA pipe.There should be uniform gap of 15mm between cross pipe frame and table top so as to give an architectural aesthetic to the table.Steel welding wherever required, is be done by MIG welding process to minimize distortion and for the deep penetration of the weld.All the steel components should be pre-treated for degreasing, de-rusting and phosphating. After proper pre-treatment, the steel components should be epoxy powder coated and oven baked at temp. above 200 deg. C to provide scratch resistance surface coating film thickness 45-50 microns |
| 20 | Book Racks Book Rack 965(W) x 560(D) x 2285 MM(H) Providing and Placing Library rack of size 965x560x2285mm (wxdxh).Vertical side 25mm thick prelaminated particle board, explosed edges covered with 2mm PVC edge banded tape make rehau. Shelves, bottom & top made of 1mm thick CRCA sheet. All Metal Pieces Shall Be WeldedProperly Strongly andconformity with regulations.CO2 Welding Shall Be Used .CRCAMetal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , DustAnd Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² .Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process .Thickness Of Coating (40 – 50) Micron . |
| 21 | Modular Workstation : Providing and Fixing ModularWorkstation for seating 1 person having Curvelinear of size 1500x1500x600mm (wxd) Top made of 25mm thick prelaminted particle board duly edgebanded. Partition panel of 75mm thick & ht 1220mm with fabric & White Marker Board having raceway at two levels, one at skirting and one above / below the worktop. It is also having a provision of Gable end, Keyboard Tray, C.p.u. Trolley and three drawerunit. |
| 22 | Modular Workstation ProvidingandFixinganel&tilebased Modular Workstation forseating4personhavingCurvelinearof size1500x1500x600mm(wxd) |
| 23 | Office Almirah with locker Providing Almirah of size.1270 x 750 x 430 mm (hxwxd) having 2 adjustable shelves making 3 compartments withoutFabrication :Almirah’s side, back, top, bottom & shelves are made from mild steel sheet not less than 22 gauge and without ant burrs & dents.The doors are made of mild steel sheet not less than 20 gauge and are having metal stiffener suitably spot welded to stiffen the door and fitted with the body with the help of but type hinges made of mild steel sheet not less than 18 gauge thickness double folded for free & smooth movement of doors. Steel shelving cabinet (Cabinet) is supplied duly fitted with 6 lever brass lock with duplicate keys of non corrodible metal. Steel shelving cabinet are finally finished by removing all dents, burrs & sharp edges and then immediately after pickling on mild steel parts is given phosphating treatment in dust free atmosphere before painting. |
| 24 | Supplying and placing in position a main table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x 750mm. The side unit shall be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF– one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. |
| 25 | High Back Chair Overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H upholstered with leatherette,back size is 47.7 W cm x 76.4 D cm.360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. |
| 26 | Supplying and placing in positionHigh Back Chair with overall size of 76.1 cm W x 76.1 cm D x 96.5 – 114 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. |
| 27 | Executive Table with side & Back Unit Table Size : 2750mm L x 2225 mm (D) x 750mm (H). For Joint DirectorTop size 2400mmx 1150mm Dx 750mm H , Side table Top Size : 2200mmL x 600 Mm Dx 600mm Ht moc 35 mm table top made of Pre Lam MDF Board modesty panels made of 17 mm thick pre lam board . All exposed edges are protected with PVC edge binding tape affected with hot met glue . Provided with side table having two drawers moves on telescope chanles and two shutters fixed with steel hinges . table is provided with 3 - drawer storage unit . all drawers of pedestal unit move or telescope channels and lockable with single key.BACK SIDE STORAGE CABINET: Size : 2400 mm x450 mm Dx 1950 mm Ht Top and sides of the back side storage thick prelaminated particle board . back side storage unit consist of 2 nos bottom storage of size 750mm Lx 750 mm Dx having twin shutter with one fixed shelf, two nos of storage of size 450 mm Lx 750 Mm ht having one shutter . Each shutter should be fixed with crank hinges . aluminium hinges should be provided on top edges of the shutter . 2 nos of storgae having front glass door of size 450mm Wx 1200 mm provided with two shelves on left and right side of the storage cabinet above the bottom storage . rest of the area should be provided with 9 nos open stoarge compartments . 1 no storage should be provised the top with twin shutter . Shelves and shutters of the cabinets should be made of 17 mm thick particle board . |
| 28 | Overall size: 1800mm L x 900mm D x 750mm Ht Top of the table should be made of 25mm thick pre- laminated particle board and all the exposed edges and sides should be protected with PVC edge banding tape of 2mm thickness affixed with hot melt glue.Four legs should be made of 50mm square 1.2mm thick CRCA pipe. Cross section jointing the two legs should be made of 40x 40x 1.2 mm thick CRCA pipe. Table top should be provided with pipe frame support fitted longitudinal or length wise below the table top. These two metal pipe supports should be made of 40x 20 x 1.2 mm thick CRCA pipe. There should be uniform gap of 15mm between cross pipe frame and table top so as to give an architectural aesthetic to the table. Modesty panel hanging type should be 450mm high and made of 17mm thick pre-lam particle board. Table should be provided with an independent storage cabinet or pedestal unit having three drawers consist of two small and one big drawer. All three drawer move on telescopic channels and lockable with single key. ••¦••¦•••••¦••••• •••••••••• • •••¦•••••••¦••••••••••••••••••••••••••• ••••••••• • •••¦•••••••• ¦••••••••••¦••••••••• ••• •front fascia should be 17mm thick. All drawers should be provided with stainless steel or aluminum handle. Base of the pedestal unit to be provided with four legs made of steel pipe.Table should be provided with side table or storage cabinet e of size 900mm L x 400mmD x 725mm Height Top of the side table or storage cabinet should be made of 25mm thick pre-laminated particle board and sides to be protected with 2mm thick PVC edge banding tape.The sides and shutters of the cabinet should be made of 17mm thick pre-laminated board and back should be made of 8mm thick pre-laminated particle board.Side table should be provided with twin shutters and on fixed shelf thus making two storage compartments. Both the shutter should be affixed with zero crank hydraulic hinges and should be duly lockable. Handle should be in stainless steel or aluminum. Base of the pedestal unit to be provided with four legs made of steel pipe.Steel welding wherever required, is be done by MIG welding process to minimize distortion and for the deep penetration of the weld.All the steel components should be pre-treated for de-greasing, de-rusting and phosphating. After proper pre-treatment, the steel components should be epoxy powder coated and oven baked at temp. above 200 deg. C to provide scratch resistance surface coating film thickness 45-50 microns Main table size: 1800mm L x 900mm D x 750mm Ht |
| 29 | High Back Revolving Chair Overall dimensions Width- 76.0cm, Depth - 76Cm, Height -102.5 , upholstered with replaceable synthetic leather upholstery covers,Armrest topmade of moulded polyurethane and mounted on to a fixed type M.S tubular armrest support chrome plated,360° revolving type, Front pivot synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature,The pedestial shall be fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. |
| 30 | Non Revolving Visitor Chair upholstered with fabric or synthetic leather,Aarmrest topmade of moulded polyurethane (P.U) and mounted on to a fixed type M.S. tubular armrest support chrome plated.leg frame welded assemblychrome plated, made from 3.5 ±0.03cm. x 1.5 ±0.02cm. x 0.16 ±0.0128cm. thk Elliptical M.S. ERW tube and provided with a base plate for seat fixing |
| 31 | High Back Revolving Chair Overall dimensions Width- 76.0cm, Depth - 76Cm, Height -102.5 ,u High Back Chair. Gas Lift with crome plated arm with cuishoned leather coated, with adjustable height . Overall Chair Height is 42" and back rest height 27.5" backrest width is 29" with thickness2". It is having chrome plated padestal base of size 710mm. Seat is made up of 15mm thick plywood with 40mm thick polytherine foam used in seat and backseat cover and back fabric is made up of Leatherite . Understructure and seat is joined with MS Plate of thickneess 3.5mm. Torsion Bar Mechanism. Chrome Platted Arms. Chrome Platted Base. Leatherette Upholstery |
| 32 | Non Revolving Visitor Chair Medium Back Chair. Gas Lift with crome plated arm with cuishoned leather coated, with adjustable height . Back rest width is 29" with thickness2". It is having chrome plated padestal base of size 710mm. Seat is made up of 15mm thick plywood with 40mm thick polytherine foam used in seat and backseat cover and back fabric is made up of Leatherite . Understructure and seat is joined with MS Plate of thickneess 3.5mm. Torsion Bar Mechanism. Chrome Platted Arms. Chrome Platted Base. Leatherette Upholsteryarmrest support chrome plated.leg frame welded assemblychrome plated, made from 3.5 ±0.03cm. x 1.5 ±0.02cm. x 0.16 ±0.0128cm. thk Elliptical M.S. ERW tube and provided with a base plate for seat fixing |
| 33 | Low Height Almirah overall size of 900mm(W)x450mm(D)x1167.5mm(H) Material prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf0.8 mm thick, Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement.Epoxy Powder coated finish to the thickness of 50 microns . |
| 34 | Sofa2 Seater Overall Size :Width: 181mDepth : 78cm Height : 81.5cm , Material : leatherite,Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 , |
| 35 | Conference Table12900(W) X 3900(D) X 750 MM(H) Supplying and placing in positiona U shape Modular Conference table 12900(W) X 3900(D) X 750 MM(H), having modules of size: 1350mmX600mm. Worksurface should be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeEdge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables.Understructure& Modesty should consistof 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product should have a knock-down construction.Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns) Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated(DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop.The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. |
| 36 | Director Table with side & Back Unit Supplying and placing in position amain table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x 750mm. The side unit shall be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF– one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. |
| 37 | 3 Seater Sofa Overall Size :Width: 181mDepth : 78cm Height : 81.5cm,Upholstery:Material : eatherite .Shade : Black ,Thickness : 1 mm ,Weight (GSM) |
| 38 | Sofa 2 Seater FabricOver all Dimension 1500mmX900mmX820mm Understructure is made up of pinewood members cross sections 22x64mm, 34x64mm & 16x35mm,Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3.Non woven fabric upholstry is stapled on the seat structure of frame |
| 39 | Sofa 3 SeaterFabric Over all Dimension 1890mmX900mmX820mm Understructure is made up of pinewood members cross sections 22x64mm, 34x64mm & 16x35mm,Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3.Non woven fabric upholstry is stapled on the seat structure of frame |
| 40 | Supplying and placing in position 4 seater Canteen table of Size1200Width mmx 750 Depth mmx 750 Height mm. Top shall be 25 mm thick ORC MDF E1 Gradeboard . On top PU painting of minimum 2H hardness.WhiteLaminate on bottom s . The Understructure shall beMS powder coated 50mmX25mmX1.2mm Thick. Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking . |
| 41 | CAFEERIA TABLE WITH CHAIR Size: 1500mm Lx 900mm W x 750 mm Ht Top of the cafeteria table should be made of 25mm thick MDF board with PU anti-scratch coating ( upto 3H hardness) on the top in desired color shade. Metal frame of the table should be made of 38 dia CRCA pipe and duly power coated. Legs should be provided with nylon caps. The Table should be provided with 6 nos chair. The chair single molded seat back shell should be made of high quality PP materials and four legs should be chrome plated. Legs should be provide with nylon caps. Steel welding wherever required, is be done by MIG welding process to minimize distortion and for the deep penetration of the weld.All the steel components should be pre-treated for degreasing, de-rusting and phosphating. After proper pre-treatment, the steel components should be epoxy powder coated and oven baked at temp. above 200 deg. C to provide scratch resistance surface coating film thickness 45-50 microns. |
| 42 | Canteen Chair Supplying and placing in position a Canteen Chair of overall size: DEPTH (D) : 52.5 CM, HEIGHT (H) : 81.8 CM, SEAT HEIGHT (SH) : 45.9 CM.The single piece seat back shell is made up of injection moulded highimpact strength glass filled polypropylene polymer compound.* SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H)The tubular welded frame is made from Dia 2.22 ± 0.03 cm x 0.15 ± 0.0128 cm Stainless Steel 304 grade tube which is buff polished. The 0.16 ± 0.008 cm thk Stainless Steel 304 CRCA sheet is welded to tubes for fixing shell to the frame.The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of thetubular frame. |
| 43 | Multipurpose Tables Table 1800x900x750mm Multipurpose Tables with MDF tops with rounded edges and Powder coated MS Understructure |
| 44 | Ex Bed Mechanical (ABSPanels) Frame work made of rectangular M.S Tube.ABS moulded head & foot Railing.Telescopic IV Rod with Four locations. Overall Size :210 L x 90 W x 60 H CMS.Backrest ,Knee Rest ,TB/RTB Positions Manoeuvred by Separate Screw From Foot End.4 Section Top Made of Perforated MS Sheet. Collapsible side Railing . Bed Mounted on 125mm Dia Castor Two with Brakes. Finish : Epoxy Powder Coated. |
| 45 | Attendant Stool Overall Supplying and placing in position a stool overall dimension of 411(l) x 411(w) x 522mm (h). Top should be made of SS 304 sheet with buffed matt finish. MS square flat tube of section 25 x 25mm with thickness of 2mm should be used. Thermosetting epoxy polyester powder coating must be done for all MS parts. Neoprene shoes should be provided to avoid the wear & tear of the product. All powder coating parts must be in Raal white & plastic, rubber parts in gray. Safe working load must be 135kg. |
| 46 | Single Bed with under storagedrawer with channles Overall Diamension L - 2060.0 mm W - 1119.0 mm H - 900.0 mm:Supplying and placing in position a Single Bed of Overall Size : Length - 2060.0 mm Width - 1119.0 mm Height - 900.0 mm Material :Bed Structure consist of metal frames made of M.S. 25 mm square.Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition Panels & Plinths are made of 25 mm Thick Prelaminated Particle Board.Head board & Tail board is made of 25 mm thick Prelaminated Particle board. All the exposed edges are edge banded with 2.0mm thick PVC edge. Side board & mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding. Construction : Knock Down construction. Packets : 1 Bed in 3 packets. Finish : 25 mm thick Prelaminated Particle Board is in maple shade.18 mm thick Prelaminated Particle Board is in maple shade.Metal frames are powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10). |
| 47 | StudyDesk : Over all Dimension 900Width mmx 600Depth mmx 728 Height mm. Top 18 mm thick Pre laminated particle board.Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).storage having shell and drawer tray 0.6 mm thick CRCA Finish powder coat |
| 48 | wardrobe 2Door Lockerover all size :875mm(W)x507mm(D)x1950mm(H) Supplying and placing in position an Almirah of over all size :900mm(W)x507mm(D)x1950mm(H) (Height without leveler). Construction & Material-? Aesthetically appealing Slimline, completely knock down construction. ? Removable Skirting to cover integral legs. ? Legs fitted with screw type leveler ? Made from combination of CRCA 0.8 mm & 0.6 mm Thickness.Main Door ? Steel Hinged Door.Main Door Locking / handle:Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. ? 3 way 90 Degree Removable key type Cam lock & locking mechanism.Locker Door & it’s locking / handle.? Fixed Half locker on RH side ? Hinged Door ? 2 way Cam lock with Knob type handleShelving: •Locker–• Top fixed full shelf • Adjustable Half Shelves – 1 no. on RH & 2 nos. on LH side of Vertical Partition. Hanging Rod?2 nos. half length Hanging rods – one on Left half of partition below top shelf & another on Right half below locker – bothmounted on Snap-on type plastic brackets9.Finish: ? Epoxy Powder coated to the thickness of 50 microns (+-10). Mirror is to be fixxed on LH Door. |
| 49 | Study Chair with armrest: Study Chair,1"14 Gauge Chrome Platted ,Pipe,WoodenArms,Fabric Upholstery eith four legs Providing and placing Visitor Chair of Size 450x450mm with back heigh 850mm with arm made with chrome pipe of outer dia 38mm moulded to required shape/design.Arms of the chair is made of chrome pipe partly covered with wooden member which is fixed to the pipe with steel machine screws. Bottom circular portion of chrome pipe. seat and back shall be sported over 12mm thick moulded ply and cussioned with foam material.Seat and back shall be fixed to steel pipe frame with nut & bolt type machine screws. The exposed wooden surface shall be polished with melamine polish. |
| 50 | 3 seater Multiseater 1675(W) X 710(D) X 775 MM(H) Material Specification : Chair-Seat: High quality cold rolled sheet is perforated,pressedandweldedto form the shape. The surface is thencleaned with acid to remove rust and el ectrostatically coated with epoxypowd er andthencuredunderheat low it form a "skin". Thickness - 7.2mm Decorative Edge :High quality metal is bent to form the shape.The surface is thenpolished andPowder Coated/ chrome p l ated. Arm And Leg : High qualityMild Steelsheet is pressedandweldedto formtheshape. The surface is thenpolished andPowder Coated/ chrome plated. Thickness - 7 .2mm Cross bar : High quality cold rolled sheet is pressedandweldedto form the shape and the surface is then cleaned with acid to remove rust and powder coated. Thickness- 2mm Seat: Choice of single seaterto four seater. Color : Choice of colors; Chrome,Grey, Blue, Cherry and black. Dimensions : 1675(W) X 710(D) X 775 MM(H) |
| 51 | 2 seater Multiseater 1180(W) X 710(D) X 775 MM(H) Material Specification : Chair-Seat: High quality cold rolled sheet is perforated,pressedandweldedto form the shape. The surface is thencleaned with acid to remove rust and el ectrostatically coated with epoxypowd er andthencuredunderheat low it form a "skin". Thickness - 7.2mm Decorative Edge :High quality metal is bent to form the shape.The surface is thenpolished andPowder Coated/ chrome p l ated. Arm And Leg : High qualityMild Steelsheet is pressedandweldedto formtheshape. The surface is thenpolished andPowder Coated/ chrome plated. Thickness - 7 .2mm Cross bar : High quality cold rolled sheet is pressedandweldedto form the shape and the surface is then cleaned with acid to remove rust and powder coated. Thickness- 2mm Seat: Choice of single seaterto four seater. Color : Choice of colors; Chrome,Grey, Blue, Cherry and black. Dimensions : 1180(W) X 710(D) X 775 MM(H) |
| 52 | OFFICERS DESK Overall size: 1800mm L x 900mm D x 750mm Ht Executive Table should consist of table top of size 1800mm Lx 900mm D, 25mm thick made from pre- laminated particle board. All the exposed edges should be protected with PVC edge banding tape of 2mm thickness affixed with hot melt glue. Table main top frame and four legs should be made of 30x 30 x 1.2mm thick CRCA pipe. Table should be provided with storage cabinet having two big drawers of equal size and should be made of 17mm thick pre- laminated particle board. Drawer should move on telescopic channels. Both the drawer should be lockable with single key. Modesty panel of the table should be 600mm high and made of 17mm thick pre-laminated particle board. Table should be provided with side table of size 900mm Lx 400mmD x 700. Top of the side table should be made out of 25mm thick pre-laminated particle board and rest part of the side table should be made of 17mm thick pre-laminated particle board. The side table should be provided with storage cabinet having single shutter and affixed with zero crank hinges. The size of storage cabinet should be 400mm W x 600mm high. Table drawer and shutter of the side unit should be provided with stainless steel or aluminium handles. All steel parts shall be pretreated in 4-step anti- corrosion treatment (degreasing, pickling, phosphating, passivation) before being powder coated and baked in oven so as to achieve 40-45 micron thickness of the powder and a complete scratch resistant surface and superb finish. 25mm thick made from pre- larniiated particle board. Modes anel of the table shoukl be 600mm and made of 17mm thick pre-laminated particle board Side t 25mm thick made from pre- laminated particle board. Side table of size 900mm Lx 400mm0 x 700mm H. two big drawers of equal size est part of the side table Muminium handles. Table should be provided with storage cabinet havi-ig m - • e o mm should be made of 17mm thick pre- lami-iated particle thick pre-laminated particle board. board Size - W400xD450xHOOOmm CRCA 30x 30 x 12mm thick s to cabiiet having single shutter and Sae - 400mm W x 600mm H MAIN TABLE |
| 53 | STEEL ALMIRAH Supplying and placing in position an AlmirahWith 4 Shelves shall have an overall size of 900mm(W)x450mm(D)x1830mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For Plain 4 Nos. of adjustable full shelves . The top shall be metal and Epoxy Powder coated finishto the thickness of 50 microns . |
| 54 | Supplying and placing in position 8 seater Canteen table of Size 2400Width mmx 900 Depth mmx 750 Height mm. Top of25 mm thick ORC MDF E1 Gradeboard . On top PU painting of minimum 2H hardness.WhiteLaminate on bottom s . The Understructure shall beMS powder coated 50mmX25mmX1.2mm Thick. Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking . |
| 55 | Cafeteria Chair, PP Shell , NylonStand Seat and back made up of PP shell, Seat size 450(l) x 400(d). Overall height of chair is 800mm. Back width and height are is 430mm and 350mm respectively. Base and leg is made up of high quality Nylon. |
| 56 | Supplying and placing in position a Wooden Dining Table Length : 150cm Width : 90cm Height :75.7cm TABLE METERIALS & SIZE :TOP: 19mm MDF board with okume veneer,Color : Brown Black, LEGS: 720 x 103 x 20 solid wood , Color : Brown Black |
| 57 | Dining Wooden chair: Supplying and placing in position a Wooden Dining Table Length : 150cm Width : 90cm Height :75.7cm TABLE METERIALS & SIZE :TOP: 19mm MDF board with okume veneer,Color : Brown Black, LEGS: 720 x 103 x 20 solid wood , Color : Brown Black |
| 58 | Supplying and placing in position a Two Seater Sofa Leatherette Upholstery, Wooden + MS chrome Frame Size:- 1175(l) x 750(d) x 700(h) Seat is Made up of Leatherite cusioned Material, with leatherite cushioned back and arms. Legs of sofa is made up of Stainless steel. |
| 59 | Supplying and placing in position a Center Table ofoverall dimensions oftable shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. having Top10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shouldbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. |
| 60 | Supplying and placing in position a Corner Tableoverall dimensions oftable shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. having Top10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shouldbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. |
| 61 | ThreeSeater Sofa Overall Dimension :Width 1840mm,Height 965mm,Depth 895mm, FRAME MATERIAL: Pine Wood, SEAT FOAM Single Layer: 5 inch ( 127 mm),Density :32 Kg/m3: Leatherite Upholstry |
| 62 | Supplying and placing in position a 1 seater sofa of Total Width 720mm,Total Height 965mm,Arm Height- 610mm, Total Depth 895mm, FRAME MATERIAL: Pine Wood,Moisture Content 12%,Thickness of Plywood used 12mm, Leaterite Weight (GSM) :230 g/m2SEAT FOAM: (DENSITY, TYPE) Thickness (mm) : Single Layer: 5 inch ( 127 mm),Density (Kg/m3):32 DENSITY SOFT,BACK FOAM: (DENSITY, TYPE)Density (Kg/m3):Recron : 2.7 Kg,LEG MATERIAL: WOODEN LEG withPVC Bush |
| 63 | Supplying and placing in position a 3 Seater SofaDimensions-Depth-825mm,Width-1300mm,Height-860mm • Upholstery : Synthetic Leather• Shade : Burgundy• Thickness of upholstery : 1 mm • Frame :Material - Solid wood frame with ply wood cross sectionMoisture Content : 12% • Foam Density :Seat : slab stock of 28 and 32 kg/ cubic meter with a layerof wadding fiber at top • Back cushions : Conjugated hollow fiber (Recron) • Webbing : Nylon • Legs : PVC |
| 64 | Supplying and placing in position a Double bed of Overall Size :Length - 2081.0 mm Width - 1866.0 mm Height - 943.0 mm Material:Bed Structure consist of metal frames made of M.S. 25 mm square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness.Partition panels & Plinths are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 25 mm thick P.V.C. membrane pressed MDF. Tail board is made of 18 mm thick Prelaminated Particle board With imported H.D.F. foil wrapped decorative trims fixed on to it.Side board, mattress panels, bottom panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding.Construction:Knock Down construction.Packets:1 Bed in 5 packets.finish:PVC membrane pressed MDF of Head Board is in Wenge finish. 18 mm thick Prelaminated Particle Board is in Wenge shade.Metal frames are powder coated in shade Metallic Silver Grey to Thickness of 50 microns (+/-10). |
| 65 | Supplying and placing in position a bed side table of Overall Size : Depth - 461.0 mm Width - 460.0 mm Height - 510.0 mm Material :Body panels of Bed side table are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Drawer front & Door are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.. Construction : Knock Down construction.Finish :. 18 mm thick Prelaminated Particle Board is in Maple shade |
| 66 | Supplying and placing in positionadressing Tableof Overall Size : Dressing Table Depth - 461.0 mm Width - 460.0 mm Height - 1710.0 mm Dressing Stool –Depth - 335.0 mm Width - 360.0 mm Height - 450.0 mm Material :Panels of Dressing table & Stool are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Drawer front & Door are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Mirror panel is made of 18 mm thick particle board with 4 mm thick mirror fixed on to it..Supporting pipe used for fixing the mirror frame is made of MS square pipe of thickness 1.2 mm. Stool seat is made of foam with fabric wrapped on to it.Hardware : The high quality hardware used like Roller Slides, Hinges , minifix, dowels is of make Hettich..Construction : Knock Down construction. Packets : 3 Packets. Finish :. 18 mm thick Prelaminated Particle Board is in Maple shade. Metal pipe is powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10). |
| 67 | Supplying and placing in positiona two seater Sofaof Dimensions-Depth- 880 mm, Width- 1320mm, Height- 910 mm,Seat Width- 500 mm, • Upholstery : Leatherite,• Frame : Pine Wood,• Seat Foam Density : 75 mm,• Seat Foam Type : VIRGIN FOAM • Belt/ Webbing materil : 3-4 vertical & 3 horizontal webbing mesh & 50 % Stretch while fixing • Back cushions : Recron • Legs : WOODEN LEG |
| 68 | Supplying and placing in positiona one seater Sofa of Dimensions-Depth- 880 mm,Width- 830mm,Height- 910 mm,Seat Width- 980 mm • Upholstery : Leatherite • Frame : Pine Wood,• Seat Foam Density : 75 mm"• Seat Foam Type : VIRGIN FOAM • Belt/ Webbing materil : 3-4 vertical & 3 horizontal webbing mesh & 50 % Stretch while fixing • Back cushions : Recron • Legs : WOODEN LEG |
| 69 | Supplying and placing in position a TV Unit of Overall Size including top cornice: Width - 1150.0 mm Depth - 473 mm Height - 830 mm.MATERIAL:Body panels are made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with 2 mm thick PVC edge banding. Door are 18 mm thick made of 18 mm P.V.C membrane pressed MDF.Drawer components are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 2 mm thick PVC edge banding.HARDWARE:The high quality hardware used like Satin finish Handles of make SWASTIK, Door Hinge Slide- On 2333, rastex 15, wooden dowels is of make Hettich..CONSTRUCTION:Knock Down construction. PACKETS:3 packet.FINISH:PVC membrane pressed MDF is in Wenge Realistic Pore Shade for Dark Chocolate Vermount V 45309 for Flutter & Squadro.18 mm thick Prelaminated Particle Board is in Colarain Shade for Dark Chocolate. Cinnamon Shade for Flutter & Squadro. |
| 70 | Supplying and placing in position office table of the following specifications. Table size shall be1200 Width x 600 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . Allthe edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on theuser side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modestypanel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key . |
| 71 | Supplying and placing in position a Metal Shoe Cabinet of Overall Size : Width : 50cm Depth : 14cmHeight : 110.8cmBody: Aesthetically appealing plain, made from combination of CRCA 0.6 mm & 0.8 mm Thickness. construction: Assembled.Finish: Epoxy Powder coated.Hardware: High quality standard hardware like screws, rivets, bushes, bangers, washers, etc.Door & Locking: Combination door opening. Common Cam lock fitted to the topmost compartment door. |
| 72 | Supplying and placing in positionTwo Seater Sofa Leatherette Upholstery, Wooden Frame Fully upholstered sofa available in configuration of single, two, three and four seats. Frame made of good quality seasoned duly anti termite treated. Seat of good quality used in seat frame duly covered leatherite, and markeen fixed with 4” thick ISI mark pinhole rubber cushion. Back & Arm Rest of good quality flat steel spring covered with coir, jute leather cloth and markeen fixed with 2” thick ISI mark pinhole rubber and high density ‘U’ foam for giving shape in back and arm rest |
| 73 | one Seater SofaLeatherette Upholstery, Wooden Frame Fully upholstered sofa available in configuration of single, two, three and four seats. Frame made of good quality seasoned duly anti termite treated. Seat of good quality used in seat frame duly covered leatherite, and markeen fixed with 4” thick ISI mark pinhole rubber cushion. Back & Arm Rest of good quality flat steel spring covered with coir, jute leather cloth and markeen fixed with 2” thick ISI mark pinhole rubber and high density ‘U’ foam for giving shape in back and arm rest |
| 74 | Supplying and placing in position aDouble bedof Overall Size :Length- 2053.0 mm Width- 1571mmHeight - 1120.0 mm Material : Bed Structure consist of metal frames made ofM.S. 25 mm Square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mmthickness.Partition panels and plinths are made of25 mm ThickPrelaminated Particle Board. Head board and Tail board are made of25 mm thick P.V.C. membrane pressed MDF.Side board , Mattress panels and Drawer panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 2 mm thick PVC edge banding.Construction :Knock Down construction.Finish : PVC membrane pressed MDF of Head Board and Tail board is inVermount V 45309 finish18mm thick Prelaminated Particle Board is in Cinnamon Shade. Metal frames are powder coated in shade Matt Black to the thickness of 50 microns(+-10). |
| 75 | Supplying and placing in positionBed side Tableof Overall Size : Depth - 455.0 mm Width - 610 mm Height - 503.5 mm Material : Top panel of 25 mm and Drawer fronts of 18 mm PVC membrane pressed MDF. Body and drawer panels are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 2 mm thick PVC edge banding. Hardware : The high quality hardware used like Roller Slides , Hinges , minifix, dowels is of make Hettich. Construction : Knock Down construction.Packets : 1 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Cinnamon Shade. 18 mm & 25 mm PVC membrane pressed MDF is in Vermount Shade. |
| 76 | Supplying and placing in position a dressing Table of Overall Size:Dresser Width— 900.0 mm DresserDepth— 432 mm DresserHeiqht— 2013.0 mm Stool Width — 470.0 mm Stool Depth — 290.0 mm Stool Height —170 mm .Material:Body panels are made of 18 mmthickPrelaminatedParticle Board All the exposed edges are edge banded with2mmthickPVC edge banding.Mirror Door & Drower fronts are made of 18 mm thickis made of Prelaminated particle Board Body back is made of 18 mm thick prelaminated particle board.Hardware:The high quality hardwareusedlikeHinges,woodendowelsis of Make Hettich. Construction:Knock Down construction. Packets: DRESSER —3 packets A STOOL 1 packet.Finish:18mmthickPrelaminatedParticleBoard is in 4504 COLARAIN Shade.. ONLY DRW FRONT IS OF 18 mm PVC membrane pressed MDF is in WENGE REALISTIC PORE 180/01—1539 finish |
| 77 | Supplying and placing in position aDouble bedof Overall Size :Length- 2053.0 mm Width- 1571mmHeight - 1120.0 mm Material : Bed Structure consist of metal frames made ofM.S. 25 mm Square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mmthickness.Partition panels and plinths are made of25 mm ThickPrelaminated Particle Board. Head board and Tail board are made of25 mm thick P.V.C. membrane pressed MDF.Side board , Mattress panels and Drawer panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 2 mm thick PVC edge banding.Construction :Knock Down construction.Finish : PVC membrane pressed MDF of Head Board and Tail board is inVermount V 45309 finish18mm thick Prelaminated Particle Board is in Cinnamon Shade. Metal frames are powder coated in shade Matt Black to the thickness of 50 microns(+-10). |
| 78 | Supplying and placing in positionBed side Tableof Overall Size : Depth - 455.0 mm Width - 610 mm Height - 503.5 mm Material : Top panel of 25 mm and Drawer fronts of 18 mm PVC membrane pressed MDF. Body and drawer panels are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 2 mm thick PVC edge banding. Hardware : The high quality hardware used like Roller Slides , Hinges , minifix, dowels is of make Hettich. Construction : Knock Down construction.Packets : 1 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Cinnamon Shade. 18 mm & 25 mm PVC membrane pressed MDF is in Vermount Shade. |
| 79 | Supplying and placing in position a dressing Table of Overall Size:Dresser Width— 900.0 mm DresserDepth— 432 mm DresserHeiqht— 2013.0 mm Stool Width — 470.0 mm Stool Depth — 290.0 mm Stool Height —170 mm .Material:Body panels are made of 18 mmthickPrelaminatedParticle Board All the exposed edges are edge banded with2mmthickPVC edge banding.Mirror Door & Drower fronts are made of 18 mm thickis made of Prelaminated particle Board Body back is made of 18 mm thick prelaminated particle board.Hardware:The high quality hardwareusedlikeHinges,woodendowelsis of Make Hettich. Construction:Knock Down construction. Packets: DRESSER —3 packets A STOOL 1 packet.Finish:18mmthickPrelaminatedParticleBoard is in 4504 COLARAIN Shade.. ONLY DRW FRONT IS OF 18 mm PVC membrane pressed MDF is in WENGE REALISTIC PORE 180/01—1539 finish |
| 80 | Supplying and placing in position a Sofa 3 Seater Leatherette Upholstery, Wooden+ MS Chrome Frame Leatherette Upholstery, Fully upholstered three sofa . Frame made of good quality seasoned duly anti termite treated. Seat of good quality used in seat frame duly covered leatherite, size of sofa is 1975w x 750l x 675 h” thick ISI mark pinhole rubber cushion. Back & Arm Rest of good quality with fabric whole back and seat covered with leatherite, jute leather cloth and markeen fixed with 2” thick ISI mark pinhole rubber and high density foam for giving shape in back and arm rest |
| 81 | Supplying and Placing in place of LIBRARY AND RECEPTION Table LIBRARY AND RECEPTIONTABLE Overall size 4500mm Length x 750mm Dx 1050mm Height Working top Height : 750mm Table tap is made out of 25mm thidc pre-laminated board. A stand shelf has to be provided at 450mm height on the table tap. Standing shelf depth should be 300mm wide. Entire table shall be manufactured from 17 mm thick pre-laminated board. Reception table shall be provided with 2 nos storage cabinet. Each storage cabinet is having 3 drawers |
| 82 | Supplying and Placing in place of a 3 Seater Sofa of Overall Size :Width: 211cm Depth : 93.5cmHeight : 89cm Seating Height : 47.5cm. stitching: thread- polyester. pitch- 5 stitch per inch( pitch of thread i.e. stitch per inch). Upholstryfabric:d3/d5/d6 leather look fabric100%polyester. thickness (mm) :0.9mm. weight (gsm) : 250g/m2. tensile strength {wrap/weft} (kg/cm) :nil. bursting strength (kg/cm2) :nil. colour fastness to rubbing {dry /wet} (scale 1-5) :grade4. frame material : solid plywood frame. moisture content ( 10 – 12 %) :less than12%. thickness of plywood used(mm) :9mm/12mm/18mm/30mm. standard of plywood used: {required standard : is 303 commercial plywood}. seat foam: (density, type)- thickness (mm) :100mm. density (kg/m3):30. type of foam (virgin/composite/moulded/ slabstock) :seat foam:5cm pure foam 3030(30density)+5cm rebond foam. covering :decron sheet spec.150g70g. back foam: (density, type)- solid decron 7d/64mm. belt/ webbing material:nylon webbing- width of belt (mm) :back:45mm/seat:50mm. |
| 83 | Sofa 1 SeaterOverall Size :Supplying and Placing in place of a 1 Seater Sofa of Overall Size :Width: 111cm Depth : 93.5cmHeight : 89cm Seating Height : 47.5cm. stitching: thread- polyester. pitch- 5 stitch per inch( pitch of thread i.e. stitch per inch). leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite)- fabric:d3/d5/d6 leather look fabric100%polyester. thickness (mm) :0.9mm. weight (gsm) : 250g/m2. tensile strength {wrap/weft} (kg/cm) :nil. bursting strength (kg/cm2) :nil. colour fastness to rubbing {dry /wet} (scale 1-5) :grade4. frame material (tropical wood / pine wood/ rubber wood): solid plywood frame. moisture content ( 10 – 12 %) :less than12%. thickness of plywood used(mm) :9mm/12mm/18mm/30mm. standard of plywood used: {required standard : is 303 commercial plywood}. seat foam: (density, type)- thickness (mm) :100mm. density (kg/m3):30. type of foam (virgin/composite/moulded/ slabstock) :seat foam:5cm pure foam 3030(30density)+5cm rebond foam. covering :decron sheet spec.150g70g. back foam: (density, type)- solid decron 7d/64mm. belt/ webbing material:nylon webbing- width of belt (mm) :back:45mm/seat:50mm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
