Supply And Installation Of Commercial Kitchen ( Boys Hostel, Girls Hostel, Canteen, Coffee Shop ) For Nift At Ompora, Budgam, Jk , Note: Contractor Should Quote Rates With All Taxes. , The Sink Unit ( 2100X600x850 ) Frame Work Made Of M.S. Angle, Fitted O Four Vertical Of S.S. Pipe Of 38 Mm Sq., Duly Supported By Cross Brasing Of 25 Mm Dia S.S. Pipe On Three Sides, The Top Of The Table Is Made Of 16 G. S.S 304. Sheet, Fitted On Said M.S. Angle And S.S. Pipe Frame Work. The Top Will Have Three Sq. Sinks Made Of 16 G. 304 S.S. Sheet Duly Welded On The Top And Grinded And Polished To Make It As A Single Unit, Three Sides Of The Top Will Have V Shape Banding To Prevent Spillage Of Water And Running Across Length Of The Equipment A Back Splash Of 150 Mm High Of The Same Top Material Is Provided. Sink Bowl Size 450 X 450 X 250 Mm , Dish Landing Table ( 1200X600x850 ) Top In 16Swg 304 S.S. Sheet Bent 50Mm And 12Mm On All Sides, Three Sides Covering, Top Sound Dampened By An Approved Method, Working Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of+20Mm.18Swg 304 S.S. Sheet Undershelf, 150Mm Ground Clearance. And 10 Dia Garbage Chute Will Be Provided On Both Corner Of The Table. Provided With S.S Sheet Covering On Both Sides Ans Three Doors On The Front Sides. No Sheet In The Back. Unit Has Provision For Keeping Two Garbage Can Along With One Garbage Can Under The Garbage Chute. , Wiping Table ( 750X450x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Clean Dish Rack ( 900X450x1800 ) Vertical Of 38 Mm 16 Swg Stainless Steelpipe With Adjustable Feet 4 No Shelf Vertical Of 18 Swg Each At Equal Distance 1St Shelf Fixed At 150Mm From Floor Level. , Two Burner Range ( 1200X750x850 ) Structure Made Of M.S. Angle Of Size50x50x5mm, Duly Rust Proof Painted. Top Of 14Swg 304 S.S. Sheet. All Four Side Covered Up To Height Of App. 10” By 18 Swgstainless Steel Sheet. Complete With Gas Burners, Valves Pilot Lamps & Removable Type Cast Iron Pansupport Of Size 24X24 & Removable Drip Tray Made Up Of 22 Swg Sheet & S.S.Handles.Uprights In 38X38x1.6Mm Ss Square Tube, Nylon Bullet Feet Height Adjustement Of +20Mm And 150Mm Ground Clearence. , Exhaust Hood Without Hanging Ducting Or Fans ( 1200X750x500 ) Construction In 20Swg 202 Grade S.S.Sheet, Channels For Fixing Of Filters, Grease Drain Box, S.S.Baffle Or Cyclonic Filters, Bulk Head Lights Of Crompton Make, Cutouts On Top For Duct Opening As Per Hvac Consultants, M.S.Angles 38X38x5mm On Top For Fixing Of Hangers, M.S.Hooks, M.S.Chain / Hangers For Hanging Of Hoods At Site, Hanging Of Hoods At Site At Correct Location With Hood Bottom At 2100Mm Affl Can Be Installed Into Or More Parts With Overall Dimension Remaining The Same. , Pot Wash Sink ( 900X600x750 ) Top In 16Swg S.S. Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 1200X600x300. , Exhaust Hood Without Hanging Ducting Or Fans ( 1350X750x500 ) Construction In 20Swg 202 Grade S.S.Sheet, Channels For Fixing Of Filters, Grease Drain Box, S.S.Baffle Or Cyclonic Filters, Bulk Head Lights Of Crompton Make, Cutouts On Top For Duct Opening As Per Hvac Consultants, M.S.Angles 38X38x5mm On Top For Fixing Of Hangers, M.S.Hooks, M.S.Chain / Hangers For Hanging Of Hoods At Site, Hanging Of Hoods At Site At Correct Location With Hood Bottom At 2100Mm Affl Can Be Installed Into Or More Parts With Overall Dimension Remaining The Same. , Low Ht Pot Rack ( 1500X600x750 ) Verticals Made Of S. S. Pipe Of 38Mm Diameter And Side Bracing Of 38 Mm Dia With Pipe Shelving Provided By 25 Mm Dia Pipes. All Pipes Of 16 Swg. 304 Thickness And Duly Polished. Provided With Height & Level Adjust Bullet Feets. , Support Table ( 750X750x600 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet One Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Exhaust Hood Without Hanging Ducting Or Fans ( 1500X750x500 ) Construction In 20Swg 202 Grade S.S.Sheet, Channels For Fixing Of Filters, Grease Drain Box, S.S.Baffle Or Cyclonic Filters, Bulk Head Lights Of Crompton Make, Cutouts On Top For Duct Opening As Per Hvac Consultants, M.S.Angles 38X38x5mm On Top For Fixing Of Hangers, M.S.Hooks, M.S.Chain / Hangers For Hanging Of Hoods At Site, Hanging Of Hoods At Site At Correct Location With Hood Bottom At 2100Mm Affl Can Be Installed Into Or More Parts With Overall Dimension Remaining The Same. , Pass Through Delivery Table ( 1500X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Work Table Sink ( 1500X600x850 ) Top In 16Swg 304 S.S.Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 400X400x300. , Pick Up Table ( 750X450x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Table With Sink ( 1350X600x850 ) Top In 16Swg 304 S.S.Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 400X400x300. , Table ( 1200X500x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Pot Rack 4 Tier ( 1500X600x1800 ) Verticals Made Of S. S. Pipe Of 38Mm Diameter And Side Bracing Of 38 Mm Dia With Pipe Shelving Provided By 25 Mm Dia Pipes. All Pipes Of 16 Swg. 304 Thickness And Duly Polished. Provided With Height & Level Adjust Bullet Feets. , Pot Rack 4 Tier ( 1200X600x850 ) Verticals Made Of S. S. Pipe Of 38Mm Diameter And Side Bracing Of 38 Mm Dia With Pipe Shelving Provided By 25 Mm Dia Pipes. All Pipes Of 16 Swg. 304 Thickness And Duly Polished. Provided With Height & Level Adjust Bullet Feets. , Storage Rack ( 900X600x1800 ) Vertical Of 38 Mm 16 Swg Stainless Steelpipe With Adjustable Feet 4 No Shelf Vertical Of 18 Swg Each At Equal Distance 1St Shelf Fixed At 150Mm From Floor Level. , Storage Rack ( 900X450x1800 ) Vertical Of 38 Mm 16 Swg Stainless Steelpipe With Adjustable Feet 4 No Shelf Vertical Of 18 Swg Each At Equal Distance 1St Shelf Fixed At 150Mm From Floor Level. , Table ( 1200X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Table ( 600X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Woek Table With Sink ( 1050X600x850 ) Top In 16Swg 304 S.S.Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 400X400x300. , Two Burner Range ( 1200X600x850 ) Structure Made Of M.S. Angle Of Size50x50x5mm, Duly Rust Proof Painted. Top Of 14Swg 304 S.S. Sheet. All Four Side Covered Up To Height Of App. 10” By 18 Swgstainless Steel Sheet. Complete With Gas Burners, Valves Pilot Lamps & Removable Type Cast Iron Pansupport Of Size 24X24 & Removable Drip Tray Made Up Of 22 Swg Sheet & S.S.Handles.Uprights In 38X38x1.6Mm Ss Square Tube, Nylon Bullet Feet Height Adjustement Of +20Mm And 150Mm Ground Clearence. , Plate Pick Up Counter ( 600X675x850 ) Top In 16Swgs.S.Sheet Bent 50Mm And 12Mm On All Sides, Three Sides Covering, Top Sound Dampened By An Approved Method, Rear Overshelves Of 450Mm Heightabove The Working Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S.Sheet Undershelf, 150Mm Ground Clearance. , Over Shelf For Pick Counter ( 600X300x300 ) 300Mm Deep In 18Swgs.S.Sheet, 450Mm High Uprights, 25Mm Od S.S.Pipe Uprights Fixed To 1.2Mm S.S.Channels Welded To The Underside Of Shelves, The Vertical Are Inserted In Four Pipe Shelves Fixed On Counter Top Of The Table. , Tray Slide Pick Up Counter ( 600X300 ) 300 Mm Wide Tray Slideshelf Is Providedtowards Is Guest Side , Hot Bain Marie ( 1800X675x850 ) Double Walled, Insulated S.S. Sheet Body, Top Will Have 3 No. Of 1 / 1G.N. Pans, 3 Pans Are In Hot Zone And 1 Pan In A Plain Zone. Hot Zone Will Be Provided With 3.0Kw Heating Element With Automatic Temp. Controller. The Space Under The Bain Marie Tank Will Be Open For Storage. The Bain Marie Is Covering With 20 Swg Sheet , Over Shelf For Hot Bain Marie ( 1800X300x300 ) 300Mm Deep In 18Swgs.S.Sheet, 450Mm High Uprights, 25Mm Od S.S.Pipe Uprights Fixed To 1.2Mm S.S.Channels Welded To The Underside Of Shelves, The Vertical Are Inserted In Four Pipe Shelves Fixed On Counter Top Of The Table. , Tray Slide For Hot Bain Marie ( 1800X300x300 ) 300 Mm Wide Tray Slideshelf Is Providedtowards Is Guest Side , Hot Bain Marie ( 1200X675x850 ) Double Walled, Insulated S.S. Sheet Body, Top Will Have 2 No. Of 1 / 1G.N. Pans, 2 Pans Are In Hot Zone And 1 Pan In A Plain Zone. Hot Zone Will Be Provided With 3.0Kw Heating Element With Automatic Temp. Controller. The Space Under The Bain Marie Tank Will Be Open For Storage. The Bain Marie Is Covering With 20 Swg Sheet , Over Shelf For Hot Bain Marie ( 1200X300x300 ) 300Mm Deep In 18Swgs.S.Sheet, 450Mm High Uprights, 25Mm Od S.S.Pipe Uprights Fixed To 1.2Mm S.S.Channels Welded To The Underside Of Shelves, The Vertical Are Inserted In Four Pipe Shelves Fixed On Counter Top Of The Table. , Tray Slide For Hot Bain Marie ( 1200X300 ) 300 Mm Wide Tray Slideshelf Is Providedtowards Is Guest Side , Pot Rack 4 Tier ( 1800X600x1800 ) Verticals Made Of S. S. Pipe Of 38Mm Diameter And Side Bracing Of 38 Mm Dia With Pipe Shelving Provided By 25 Mm Dia Pipes. All Pipes Of 16 Swg. 304 Thickness And Duly Polished. Provided With Height & Level Adjust Bullet Feets. , Glass Rack ( 600X450x1650 ) Vertical Of 38 Mm 16 Swg Stainless Steelpipe With Adjustable Feet 4 No Shelf Vertical Of 18 Swg Each At Equal Distance 1St Shelf Fixed At 150Mm From Floor Level. , Exhaust Hood Ducting Fabricated Of G, I Sheet Of 20 / 22 And 24 Swg.Thickness Duly Painted, All The Joints Duly Insulated With Rubber Padding And Properly Screw Botted.The Ducts Will Be As Per Size, Specifications And Site Conditions Mentioned And Available.The Ducts Should Be Securely Hanged To Ceiling Or Hood Top By Fasteners Angles And Chains Etc. With Grills , Fresh Air Coolerducting Fabricated Of G, I Sheet Of 20 / 22 And 24 Swg.Thickness Duly Painted, All The Joints Duly Insulated With Rubber Padding And Properly Screw Botted.The Ducts Will Be As Per Size, Specifications And Site Conditions Mentioned And Available.The Ducts Should Be Securely Hanged To Ceiling Or Hood Top By Fasteners Angles And Chains Etc.With Grills , Smoke Scrubber Supply Of Double Skin Type Horizontal / Vertical Floor Mounted / Ceiling Suspended Wet Scrubber Unit Complete With Extruded Aluminium Section With 0.6 Mm Pre-Plasticized Complete Pipe Fitting. The Drain Pan Shall Be Constructed Out Of 22G S.S Tank 304 Grade Stainless Steel Confirm To Specifications. 7000 Cfm. , Fresh Air Washer Cooler Air Washer 15000 Cfm Double Skin Type Horizontal / Vertical Floor Mounte / Ceiling Suspended Air Washer Unit Complete Pre Coated Gi Sheet Outside And 0.6 Mm Plan Galvanized Sheet Inside, 23- +2 Mm Thick Puf Insulation With Aluminum Profile, Centrifugel Blower Make Air Wind Blower Fan High Efficency 7.5 Hp Motors Shall Be 415-+ 10% Volts, 50Hz, 3 Phase Ac Supply Complete Arrangement Of Evaporative 200 Mm Cooling Paid With Pre Filter 20 Microns Aluminum Weir Next Section. Submiserible Motor Pump. The Drain Pan Shall Be Constructed Out Of 22G Ss Tank Of 304 Grade S.S Steel Confirm To Specifications. 15000 Cfm , Insect Killer ( Powder Coated ) Power Coatedbody With Two Black Light Tube Lights Provided With Ac / Dc Converter.One Power Grid Inside Made Of Ms Wire For Execution Of Insects.Two Safety Grills On The Outer Sides Of The Body To Prevent Access To Power Grid Independent Power Controls. , Air Curtain ( 5 Feetlong ) Standard M.S Powder Coated Body With Blowers And Motors Inside The Cabinet.The Width Of Aircurtain Is One Metre And Velocity 10Mtr / Sec.1 / 5 Hp 1440Rpm Single Phase. , Gas Bank 7& Pipe Line Budget Included 150 Rn.Ft C Class Pipe Line With Accessories Of Cylinder Bank. , Three Sink Unit ( 1800X600x850 ) Frame Work Made Of M.S. Angle, Fitted O Four Vertical Of S.S. Pipe Of 38 Mm Sq., Duly Supported By Cross Brasing Of 25 Mm Dia S.S. Pipe On Three Sides, The Top Of The Table Is Made Of 16 G. S.S 304. Sheet, Fitted On Said M.S. Angle And S.S. Pipe Frame Work. The Top Will Have Three Sq. Sinks Made Of 16 G. 304 S.S. Sheet Duly Welded On The Top And Grinded And Polished To Make It As A Single Unit, Three Sides Of The Top Will Have V Shape Banding To Prevent Spillage Of Water And Running Across Length Of The Equipment A Back Splash Of 150 Mm High Of The Same Top Material Is Provided. Sink Bowl Size 450 X 450 X 250 Mm , Dish Landing Table ( 1000X450x850 ) Top In 16Swg 304 S.S. Sheet Bent 50Mm And 12Mm On All Sides, Three Sides Covering, Top Sound Dampened By An Approved Method, Working Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of+20Mm.18Swg 304 S.S. Sheet Undershelf, 150Mm Ground Clearance. And 10 Dia Garbage Chute Will Be Provided On Both Corner Of The Table. Provided With S.S Sheet Covering On Both Sides Ans Three Doors On The Front Sides. No Sheet In The Back. Unit Has Provision For Keeping Two Garbage Can Along With One Garbage Can Under The Garbage Chute. , Support Table ( 900X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Support Table ( 600X600x600 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Support Table ( 900X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Over Shelf ( 900X300x300 ) 300Mmdeep In 18Swg 304 S.S.Sheet, 450Mm High Uprights, 25Mm Od S.S.Pipe Uprights Fixed To 1.2Mm S.S.Channels Welded To The Underside Of Shelves, The Vertical Are Inserted In Four Pipe Shelves Fixed On Counter Top Of The Table. , Work Table With Sink ( 900X500x850 ) Top In 16Swg 304 S.S.Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 400X400x300. , Table ( 2700X450x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Island Exhaust Without Ducting, Hanging Or Fans ( 1500X750x500 ) Construction In 18Swg 202 Grade S.S.Sheet, Channels For Fixing Of Filters, Grease Drain Box, S.S.Baffle Or Cyclonic Filters, Bulk Head Lights Of Crompton Make, Cutouts On Top For Duct Opening As Per Hvac Consultants, M.S.Angles 38X38x5mm On Top For Fixing Of Hangers, M.S.Hooks, M.S.Chain / Hangers For Hanging Of Hoods At Site, Hangingof Hoods At Site At Correct Location With Hood Bottom At 2100Mm Affl Can Be Installed Into Or More Parts With Overall Dimension Remaining The Same. , Support Table ( 750X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Wall Typeexhaust Without Ducting, Hanging Or Fans ( 1800X750x500 ) Construction In 20Swg 202 Grade S.S.Sheet, Channels For Fixing Of Filters, Grease Drain Box, S.S.Baffle Or Cyclonic Filters, Bulk Head Lights Of Crompton Make, Cutouts On Top For Duct Opening As Per Hvac Consultants, M.S.Angles 38X38x5mm On Top For Fixing Of Hangers, M.S.Hooks, M.S.Chain / Hangers For Hanging Of Hoods At Site, Hanging Of Hoods At Site At Correct Location With Hood Bottom At 2100Mm Affl Can Be Installed Into Or More Parts With Overall Dimension Remaining The Same. , Wall Typeexhaust Without Ducting, Hanging Or Fans ( 1500X750x500 ) Construction In 20Swg 202 Grade S.S.Sheet, Channels For Fixing Of Filters, Grease Drain Box, S.S.Baffle Or Cyclonic Filters, Bulk Head Lights Of Crompton Make, Cutouts On Top For Duct Opening As Per Hvac Consultants, M.S.Angles 38X38x5mm On Top For Fixing Of Hangers, M.S.Hooks, M.S.Chain / Hangers For Hanging Of Hoods At Site, Hanging Of Hoods At Site At Correct Location With Hood Bottom At 2100Mm Affl Can Be Installed Into Or More Parts With Overall Dimension Remaining The Same. , Table ( 900X750x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Sink ( 600X750x850 ) Top In 16Swg S.S.Sheet Bent 50Mm And 12Mm On All Sides, Topsound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 450X450x300. , Four Burner Range ( 750X750x850 ) Structure Made Of M.S. Angle Of Size35x35x5mm, Duly Rust Proof Painted. Top Of 16G Thick S.S. Sheet. All Four Side Covered Up To Height Of App. 300 By 20 Swg Stainless Steel Sheet. Complete With Gas Burners, Valves Pilot Lamps & Removable Type Cast Iron Pansupport Of G.I. Sheet Drip Tray & S.S.Handles.Cast Iron Pan Support Of 300X300mm. , Support Table 750X750x850 Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Hot & Plain Bain Marie ( 1800X675x850+450 ) Double Walled, Insulated S.S. Sheet Body, Top Will Have 3 No. Of 1 / 1G.N. Pans, 3 Pans Are In Hot Zone And 1 Pan In A Plain Zone. Hot Zone Will Be Provided With 3.0Kw Heating Element With Automatic Temp. Controller. The Space Under The Bain Marie Tank Will Be Open For Storage. The Bain Marie Is Covering With 20 Swg Sheet , Over Shelf ( 1800X300x300 ) 300Mm Deep In 18Swgs.S.Sheet, 450Mm High Uprights, 25Mm Od S.S.Pipe Uprights Fixed To 1.2Mm S.S.Channels Welded To The Underside Of Shelves, The Vertical Are Inserted In Four Pipe Shelves Fixed On Counter Top Of The Table. , Air Curtain ( 6Feet ) Standard M.S Powder Coated Body With Blowers And Motors Inside The Cabinet.The Width Of Aircurtain Is One Metre And Velocity 10Mtr / Sec.1 / 5 Hp 1440Rpm Single Phase. , Air Curtain ( 3 Feet ) Standard M.S Powder Coated Body With Blowers And Motors Inside The Cabinet.The Width Of Aircurtain Is One Metre And Velocity 10Mtr / Sec.1 / 5 Hp 1440Rpm Single Phase. , Cabinet ( 1200X675x850+450 ) Top In 16Swg 304 S.S. Sheet Bent 50Mm And 12Mm On All Sides, Three Sides Covering, Top Sound Dampened By An Approved Method, Working Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of+20Mm.18Swg 304 S.S. Sheet Undershelf, 150Mm Ground Clearance.Provided With S.S Sheet Covering On Both Sides Ans Three Doors On The Front Sides.Sheet In The Back. , Cold Bain Marie ( 1200X675x850 ) Double Walled, Insulated S.S. Sheet Body, Top Will Have 03 No. Of 1 / 1G.N. Pans, 03 Pans Are In A Plain Zone. The Space Under The Bain Marie Tank Will Be Open For Storage. The Bain Marie Is Covering With 20 Swg Sheet With Three Sides. The Space Under The Bain Marie Tank Will Be Open For Storage , Over Shelf ( 1200X300x300 ) 300Mm Deep In 18Swgs.S.Sheet, 450Mm High Uprights, 25Mm Od S.S.Pipe Uprights Fixed To 1.2Mm S.S.Channels Welded To The Underside Of Shelves, The Vertical Are Inserted In Four Pipe Shelves Fixed On Counter Top Of The Table. , Sink ( 600X675x850+150 ) Top In 16Swg S.S.Sheet Bent 50Mm And 12Mm On All Sides, Topsound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 450X450x300. , Dish Landing Table With G / C ( 900X500x850 ) Top In 16Swgs.S.Sheet Bent 50Mm And 12Mm On All Sides, Excepting Sides With Splash Back;, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swgs.S.Sheet Undershelf, 150Mm Ground Clearance. , Two Sink With Spray Unit ( 1200X600x850 ) Top In 16Swg S.S. Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top . , Off Loading Table ( 1000X500x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Pick Up Counter ( 1200X450x850 ) Top In 16Swgs.S.Sheet Bent 50Mm And 12Mm On All Sides, Three Sides Covering, Top Sound Dampened By An Approved Method, Rear Overshelves Of 450Mm Heightabove The Working Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S.Sheet Undershelf, 150Mm Ground Clearance. , Storage Cabinet ( 1200X600x850 ) Top In 16Swg 304 S.S. Sheet Bent 50Mm And 12Mm On All Sides, Three Sides Covering, Top Sound Dampened By An Approved Method, Working Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of+20Mm.18Swg 304 S.S. Sheet Undershelf, 150Mm Ground Clearance.Provided With S.S Sheet Covering On Both Sides Ans Three Doors On The Front Sides.Sheet In The Back. , Dish Landing Table ( 1350X600x850 ) Top In 16Swg 304 S.S. Sheet Bent 50Mm And 12Mm On All Sides, Three Sides Covering, Top Sound Dampened By An Approved Method, Working Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of+20Mm.18Swg 304 S.S. Sheet Undershelf, 150Mm Ground Clearance. And 10 Dia Garbage Chute Will Be Provided On Both Corner Of The Table. Provided With S.S Sheet Covering On Both Sides Ans Three Doors On The Front Sides. No Sheet In The Back. Unit Has Provision For Keeping Two Garbage Can Along With One Garbage Can Under The Garbage Chute. , Wall Shelf ( 1500X300x375 ) Shelf In 18Swg 304 S.S. Sheet, 3 Sides Bent Down 38Mm And 12Mm, Rear Bent Up 38Mm And Hemmed 12Mm, Brackets 150Mm High In 16Swg 304 Sheet At Gap Exceeding 600Mm, 25Mm Gap To Be Provided Between Wall Shelf Rear, Brackets To Be Bolted To S.S. Studs On The Underside Of Shelf By Dome Shaped Nuts. , Off Loading Table ( 750X750x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Pre Wash Sink Unit With Pre Rinse Spray ( 750X750x850 ) Top In 16Swg S.S. Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top , Loading Table ( 750X750x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Wiping Table ( 2400X450x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Work Table ( 1500X500x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Work Table With Sink ( 1200X600x850 ) Top In 16Swg 304 S.S.Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 400X400x300. , Work Table With Sink ( 1800X600x850 ) Top In 16Swg 304 S.S.Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Height Of 850Mm Bent 25Mm At 90° And Down 12Mm, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm, 150Mm Ground Clearance. Sink Bowl Welded With Top Of Size 400X400x300. , Exhaust Hood Without Hanging Ducting Or Fans ( 1800X750x500 ) Construction In 20Swg 202 Grade S.S.Sheet, Channels For Fixing Of Filters, Grease Drain Box, S.S.Baffle Or Cyclonic Filters, Bulk Head Lights Of Crompton Make, Cutouts On Top For Duct Opening As Per Hvac Consultants, M.S.Angles 38X38x5mm On Top For Fixing Of Hangers, M.S.Hooks, M.S.Chain / Hangers For Hanging Of Hoods At Site, Hanging Of Hoods At Site At Correct Location With Hood Bottom At 2100Mm Affl Can Be Installed Into Or More Parts With Overall Dimension Remaining The Same. , Work Table ( 1200X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance. , Pass Through Delivery Table ( 1200X600x850 ) Top 16Swg 304 S.S .Sheet Bent 50Mm And 12Mm On All Sides, Top Sound Dampened By An Approved Method, Uprights In 38X38x1.6Mm S.S.Square Tube, Nylon Bullet Feet Height Adjustment Of +20Mm.18Swg 304 S.S. Sheet Two Undershelf, 1.2Mm Thick S.S. Channel Of Size 12 / 25X100x25 / 12Mm For Reinforcement Of Undershelf, 150Mm Ground Clearance.
