|
| 1 | Earth for earth work in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50m. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per direction and direction of E/I. |
| 2 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M. and lift of 1.5M all complete as per building specification and direction E/I. (Mode of measurement – Compacted volume) |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials labour, royalty and taxes all compete as per building specification and direction E/I. (Mode of measurement – Compacted volume). |
| 4 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I. |
| 5 | Providing P.C.C. (M-100) (1:3:6) in foundation with approved quality of stone metal grade III (53mm to 22.4 mm size) clean coarse sand of F.M. 2.5to3 including screening mixing cement concrete in mixer and placing in position vibrating curing taxes and royalty all complete as per building specification and direction of E/I. |
| 6 | Providing R.C.C. (M-200) (1:1½:3)in foundation with approved quality of stone chips(20mm .to 6mm size) graded and clean coarse sand of F.M. 2.5 including screening , shuttering, miming cement concretein mixer and placingin position vibrating striking curing (but excluding the cost of reinforcement and royalty all complete as per building specification and direction of E/I. |
| 7 | Providing R.C.C. (M-200) (1:1½:3) in columns with approved of stone chips (20mm.to 6 mm size ) graded and clean coarse of F.M.2.5 to 3 including screening centering shuttering, mixing cement concretein mixer and placingin position vibrating striking curing (but excluding the cost of reinforcement and royalty all complete as per building specification and direction of E/I. |
| 8 | Providing R.C.C. (M-200) (1:1½:3) in lintel with approved of stone chips (20mm.to 6 mm size ) graded and clean coarse of F.M.2.5 to 3 including screening centering shuttering, mixing cement concretein mixer and placingin position vibrating striking curing (but excluding the cost of reinforcement and royalty all complete as per building specification and direction of E/I. |
| 9 | Providing R.C.C. (M-200) (1:1½:3) in Chhajja with approved quality of stone chips (20mm.to 6 mm size ) graded and clean coarse of F.M.2.5 to 3 including screening centering shuttering, mixing cement concretein mixer and placingin position vibrating striking curing (but excluding the cost of reinforcement and royalty all complete as per building specification and direction of E/I. |
| 10 | Providing R.C.C. (M-200) (1:2:4) in roof slab with approved quality of stone chips (20mm.to 6 mm size ) graded and clean coarse of F.M.2.5 to 3 including screening centering shuttering, mixing cement concretein mixer and placingin position vibrating striking curing (but excluding the cost of reinforcement and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing Tor steel reinforcement of 8 mm. dia bars as per approved design & drawing drawingincluding carriage of M.S. rods(Straight of in coils ) to work slte. Cutting , bending and binding with annealedwire cost of wire. removal of rust, placing the rods in position all complete as per building specification and directionof E/I. |
| 12 | Providing Tor steel reinforcement of 10 to 12 mm. dia bars as per approved design & drawing drawingincluding carriage of M.S. rods(Straight of in coils ) to work slte. Cutting , bending and binding with annealedwire cost of wire. removal of rust, placing the rods in position all complete as per building specification and directionof E/I. |
| 13 | Providing 12mm. cement plaster (1:6)with clean coarse sand of F.M. 1.5 including cost of screening curing with all leads and lifts of water,Scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 14 | Providing 6mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M. of 1.5 including cost of screening curing with all leads and lifts of water,Scaffolding, taxes and royalty all complete as per building specification and direction of E/I.Taking 5% for CORNICE |
| 15 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge :11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 16 | supplying , fitting and fixing steel gate with 16mm. dia M.S bars 15.cm. centers with spear shaped top ends projected 225 mm. beyond frame fitted on 40x40x6mm.M.S. angle frame size 60x60x6mm. M.S.angle frame of size 60x60x6mm, including cost fabretion providing necessary including arrangements with haskaland dommy duly fixed in C.C. (1:2:4) blocks or required size applying a priming cost of red lead paint over steel work, taxes all complete as per drawing, specification and direction of E/I. |
| 17 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.16.91.1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 18 | Dismantling R.C.C. work including stacking service able materials in countable stacks within 15m. lead and disposal of unserviceable materials with all leads all complete as per building specification and direction of E/I. |
| 19 | Dismantling barbed wire fencing with bullah or angle iron post including stacking all materials in countable stacks within 15M lead all complete as per direction of E/I. |
| 20 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 21 | Providing centring and shuttering -do-do- etc. all complete job. Foundation |
| 22 | Lintel, Beam, Plinth etc. |
| 23 | Column |
| 24 | Roof |
| 25 | Decorative Work |
| 26 | Carriage of Materials :-Cement - Lead 10 km. |
| 27 | Sand - Lead 10 km. |
| 28 | Stone Chips - Lead 30 km. |
| 29 | Steel - Lead 10 km. |
| 30 | Add 12% for G.S.T. |
| 31 | Labour Cess |
