Providing 1.5Hp 1Phase Borewell Submersible Motor At Kakkara - Puravattom Colony Drinking Water Supply Scheme -Electrical Works
Tender Value
1.89 Lakhs
Estimated cost
Bid Submission
25 Jun 2022
0 days left
EMD
4741
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
eramam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing 1.5Hp 1Phase Borewell Submersible Motor At Kakkara - Puravattom Colony Drinking Water Supply Scheme -Electrical Works
BOQ
| Sl. No. | Item Description |
| 1 | Supply, conveyance, erection, testing and commissiong of 1.5HP 1Phase 220V 1500 RPM Borewell Submersible Pump set suitable for 6\"\" bore dia delivering upto 350LPM at a total head range upto 251m of Kirlosker make (Model No:- KP40321S) or any other equivalent make of Crompton Greaves, Texmo, V Guard, CRI including giving connections etc as required. |
| 2 | Supply and fixing Single phase DOL starters with dry running preventor for 0.25HP to 3HP motor including giving connections etc as required. (for 1.5 HP Bore well submersible motor) with under voltage & over voltage protection |
| 3 | Supply & fixing the following Power Capacitors connected in positon and giving connection. 1 KVAr, 1 phase, 230 V, delta connected, standard duty Metalised Poly Propylene Capacitor, suitable for direct connection to motors. |
| 4 | Supply and providing 32/40 mm dia or nearest available size High Density water Pipes ofpressure 10kg/cm2 or equivalent along with all required accessories such as hose nipple, hose collar, hose clamp, bend etc including conveyance. |
| 5 | Supply and providing 32/40 mm or nearest equivalent size RPVC water pipe with specials partially clamped partially in trench as per site reqiurement including providing trench and refilling to original surface (to tank) |
| 6 | Supply and providing 32/40 mm or nearest size GM non return valve vertical/ horizontal with accessories/ adaptor/ coupling/ nipple in the delivary line as per site condition |
| 7 | Supply and providing 32/40 mm or nearest size GM wheel valve with accessories/ adaptor/ coupling/ nipple/ T/ bend in the delivary line as per site condition. |
| 8 | Supply and Providing 32/40 mm dia or nearest equivalent size GI Double nipple (hose collar) with Check nut & rubber washer etc. as required fixing on the distribution side of the Water tank. |
| 9 | Supply and providing 10mm dia Nylon Rope with cable tie for supporting 1 Phase 1.5HP Bore well Motor Pump set. |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 11 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 12 | Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 2.50 sq.mm 2 Run + 1.50 sq.mm 1 Run |
| 13 | Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 4.00 sq.mm 2 Run + 2.50 sq.mm 1 Run(for 1? DB) |
| 14 | Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes. (including fastening with cable tie)2.50 sq mm |
| 15 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 8 way, Double door |
| 16 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps |
| 17 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps |
| 18 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 19 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 20 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 16/25/32amps 240 volts \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 21 | Earthing with G.I. earth pipe 2.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required |
| 22 | Supply and providing test joint for the earthing system using 2 Nos of 25 x 3 mm tinned copper strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required. |
| 23 | Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required.3.15 mm copper conductor (10 SWG) |
| 24 | Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 25 | Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required25 x 6 mm brass bolt & nut |
| 26 | Meter BoardFabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 27 | Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 28 | Supply and providing heavy duty \"A\" section neoprene gasket in the panel board. A\" section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 29 | S & F switch disconnector fuse unit in sheet steel enclosure complete with handle assembly, door inter lock and padlocking arrangement of the following ratings:32A AC 23 A, SPN SDF |
| 30 | Supplying and fixing 32A, HRC Fuse with HRC Fuse Link with connections, in existing meter board |
| 31 | Supplying and fixing 32A, 2way Neutral Link mounted on DMC/SMC base with connections, in existing meter board |
| 32 | Supply and fabrication conveyance and installation of GI angle iron frame work for holding borewell pump on top. |
| 33 | Charges for dismantling and removing the existing hand pump installed at the site including the removal of sediments/silt in the borwell for installation of newly proposed borewell pump. |
| 34 | Charges for removing the existing deteriorated/ corroded G.I pipe installed in the existing borewell using chain block and drilling machine |
| 35 | Charges for replacing and fixing the heavy duty rigid PVC pipe suitable for 160 mm or equivalent size bore well to the required depth engaging borewell digging equipments with technicians including all required accessories/ machineries at the site and making good the damage to obtain clear functioning of the borewell. |
| 36 | Charges for cleaning the existing borewell for the purpose of installing the new borewell pump. |
| 37 | Charges for preparation and submission of test & completion report KSEB (excluding CD charges) |
AI Tender Summary
Tender Timeline
Jun 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender