Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Qazigund ( District Anantnag And Kulgam ) For The Financial Year 2022-23.- Mechanical Transportation, Loading, Unloading And Handling Of Various Items Such As Pump Parts, Motors, Starters, Voltage Stabilizers, Coil Assemblies, Welding Tools & Plant, Etc. Using Appropriate Means Of Transport As Under: 2 Private Car, Auto-Rickshaw Or Similar With 1.0 Km Lead 3 Extra Per Kilometer For Lead >1.0 Kms Upto 5.0 Kms 4 Extra Per Kilometer For Lead >5.0 Kms Upto 10.0 Kms 5 Extra Per Kilometer For Lead >10.0 Kms Upto 20.0 Kms 6 Extra Per Kilometer For Lead >20.0 Kms Upto 30.0 Kms 7 Extra Per Kilometer For Lead >30.0 Kms Upto 50.0 Kms 8 Extra Per Kilometer For Lead >50.0 Kms Upto 70.0 Kms 9 Load Carrier Auto, Mini Van Or Similar With 1.0 Km Lead 10 Extra Per Kilometer For Lead >1.0 Kms Upto 5.0 Kms 11 Extra Per Kilometer For Lead >5.0 Kms Upto 10.0 Kms 12 Extra Per Kilometer For Lead >10.0 Kms Upto 20.0 Kms 13 Extra Per Kilometer For Lead >20.0 Kms Upto 30.0 Kms 14 Extra Per Kilometer For Lead >30.0 Kms Upto 50.0 Kms 15 Extra Per Kilometer For Lead >50.0 Kms Upto 70.0 Kms 16 Mini Truck Like Tata Mobile, Bolero Camper Or Similar With 1.0 Km Lead 17 Extra Per Kilometer For Lead >1.0 Kms Upto 5.0 Kms 18 Extra Per Kilometer For Lead >5.0 Kms Upto 10.0 Kms 19 Extra Per Kilometer For Lead >10.0 Kms Upto 20.0 Kms 20 Extra Per Kilometer For Lead >20.0 Kms Upto 30.0 Kms 21 Extra Per Kilometer For Lead >30.0 Kms Upto 50.0 Kms 22 Extra Per Kilometer For Lead >50.0 Kms Upto 70.0 Kms 23 Providing & Applying Of Grease 24 Providing & Fitting Of Palmative Packing 25 Complete Dismantling Of Single Stage Horizontal Pump ( All Types ) By Way Of:Disconnecting All Leads From The Motor And Marking The Terminals, Uncoupling Of Motor From The Pump. Disassembling, Dismantling And Segregation Of Various Pump Parts Such As Shaft And Sleeves, Impeller, Gland, Fasteners, Etc. 26 Suction Size Upto 200Mm 27 Suction Size > 200Mm Upto 400Mm 28 Extra Per Additional Stage Over Corresponding Suction Sizes Above 29 Complete Assembling Of Single Stage Horizontal Pump ( All Types ) After Cleaning Of All Parts Throughly With Petrol, Coupling And Alignment With Motor, Connecting Of Motor Leads And Testing On Full Load. 30 Suction Size Upto 200Mm 31 Suction Size > 200Mm Upto 400Mm 32 Extra Per Additional Stage Over Corresponding Suction Sizes Above 33 Earth Work In Bulk Excavation By Mechanical Means ( Hydraulic Excavator ) Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 M2 On Plan ) Including Disposal Of Excavated Earth Lead Upto 50 Meters And Lift Upto 1.5 M, As Directed By Engineer-In-Charge.All Kinds Of Soil : 34 Earth Work In Bulk Excavation By Mechanical Means ( Hydraulic Excavator ) Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 M2 On Plan ) Including Disposal Of Excavated Earth Lead Upto 50 Meters And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. Ordinary Rock 35 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 Min Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides Andramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil 36 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 Min Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides Andramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: Ordinary Rock 37 Replacement Of Driving End ( De ) Bearing Of Horizontal / Vertical Pump By Way Of:Uncoupling Of Motor From The Pump, Isolating Of De Bearing. Carefully Extracting The Old Damaged Bearing From The Housing With The Help Of Bearing Puller, Etc And Fitting Of New Bearing In Its Place. Refitting Back Of Pump Parts, Coupling And Alignment With The Pump. The Job Includes Load Testing Of Pump. 38 Suction Size Upto 200Mm 39 Suction Size > 200Mm Upto 400Mm 40 Replacement Of Non-Driving End ( Nde ) Bearing Of Horizontal Pump By Way Of:Opening The End Cover Of Nde Bearing Housing. Carefully Extracting The Old Damaged Bearing From The Housing With The Help Of Bearing Puller, Etc And Fitting Of New Bearing In Its Place. Refitting Back Of Pump Parts, Coupling And Alignment With The Pump. The Job Includes Load Testing Of Pump. 41 Suction Size Upto 200Mm 42 Suction Size > 200Mm Upto 400Mm 43 Extraction Of Submersible Pump / Motor Set Along With Column Pipes From The Well By Hoisting With Tripod And Chain Pulley Block And By Using Tools And Tackles Required For Extraction Of Pump Set And Uncoupling The Pump And Motor 44 Column Pipes Upto 100Mm Nb And 50Mtr Depth 45 For Depths Exceeding 50M 46 Extra Over Corresponding Depth Level For Pipes >100Mm Nb 47 Assembling Of Submersible Pump / Motor Set And Lowering Along With Column Pipes In The Well By Chain Pulley Block, Tripod, Tools And Tackles And Testing On Full Load At Site. 48 Column Pipes Upto 100Mm Nb And 50Mtr Depth 49 For Depths Exceeding 50M 50 Extra Over Corresponding Depth Level For Pipes >100Mm Nd 51 Removal From Piping System And Complete Dismantling Of Various Type Of Valves Such As Foot Valves / Butterfly Valves / Nrvs / Check Valves / Sluice Valves ( Without Spur Gear Mechanism ) By Way Of Disassembling Of Parts, Etc. 52 < 100Mm Nominal Size 53 >=100Mm Upto 200Mm Nominal Size 54 > 200Mm Upto 350Mm Nominal Size 55 Assembling Of All Parts Of Dismantled Valve, Fitting In The Piping System And Testing. 56 < 100Mm Nominal Size 57 >=100Mm Upto 200Mm Nominal Size 58 > 200Mm Upto 350Mm Nominal Size 59 Partial Dismantling Of Various Types Of Valves Such As Nrvs, Sluice Valves, Butterfly Valves, Flap Valves, Etc. For Repairs Or Replacement Of Parts Such As Hinge Pin / Seat Ring / Disc Face / Hinge Repairs, Etc. And Reassembling Of All Parts Of Dismantled Valve And Testing. 60 <100Mm Nominal Size 61 >=100Mm Upto 200Mm Nominal Size 62 >200Mm Upto 350Mm Nominal Size 63 Fabrication, Providing And Fitting Of Ss / Alloy Steel Hinge Pin For All Types Of Valves, Etc. As Per Old Sample But Excluding The Cost Of Extracting The Old Pin And Dismantling / Reassembling The Valve, Etc. 64 Fabrication & Providing Of New Bronze Body Seat Ring / Bronze Wedge Facing Ring / Bronze Stem Nut / Float Guide As Per Sample For Various Valves But Excluding Cost Of Dismantling The Valve Parts 65 Upto 1.0 Kg 66 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 67 Extra Per Kg >2.5Kgs Upto 4.0 Kgs 68 Providing And Fitting Of Rubber Gasket For Various Types Of Valves 69 Providing Of Jute / Hemp Gland Packing 70 Fabrication & Providing Of New Ss Stem Nut / Stem-Spindle / Pinion / Pinion Shaft / Stub Shaft ( Aisi-410 Or Is 6603 ) For Sluice / Butterfly Or Other Type Of Valve As Per Old Sample 71 Upto 20.0 Kg 72 Extra Per Kg >20.0 Kg Upto 40 Kgs 73 Extra Per Kg >40Kgs Upto 60 Kgs 74 Extra Per Kg > 60 Kgs 75 Foot Valvefabrication, Providing And Fitting Of Ci Disc Plate As Per Old Sample 76 Providing Of Leather Disc Face Washer For Foot Valve 77 Labour For Fitting Of Washer To Foot Valve Including Removal Of Foot Valve From Suction Line, Extraction Of Old Damaged Washer, Fitting Of New ( Available ) Washer And Refitting Of Foot Valve To Suction Line. 78 Providing And Fitting Of Screwed Type Gm Foot Valve Conforming To Is-4038 Of Nominal Size: 79 15Mm 80 20Mm 81 25Mm 82 32Mm 83 40Mm 84 Ball Valveproviding And Fitting Of Isi Mark Forged Brass Ball Valve ( Preferred Make: Zoloto Or Equivalent ) 85 10Mm 86 15Mm 87 20Mm 88 25Mm 89 32Mm 90 40Mm 91 Flangesproviding And Welding Of Steel Plate Flanges Of Nominal Pressure Rating 1.6Mpa As Per Is 6392 With Nominal Sizes As Under: 92 32Mm 93 40Mm 94 50Mm 95 65Mm 96 80Mm 97 100Mm 98 125Mm 99 150Mm 100 200Mm 101 250Mm 102 Providing And Welding Of Steel Plate Blind Flanges As Per Is 6392 Of Nominal Pressure Rating 1.6Mpa With Nominal Sizes As Under: 103 50Mm 104 65Mm 105 80Mm 106 100Mm 107 125Mm 108 150Mm 109 200Mm 110 250Mm 111 Gasketproviding Of Natural Rubber Gasket For Flanged Joints With Nominal Sizes As Under: 112 32Mm 113 40Mm 114 50Mm 115 65Mm 116 80Mm 117 100Mm 118 125Mm 119 150Mm 120 200Mm 121 250Mm 122 300Mm 123 350Mm 124 Pressure Gaugeproviding And Fitting Of M.S Pressure Gauge As Under: 125 50Mm Dial 126 100Mm Dial 127 150Mm Dial 128 200Mm Dial 129 Hiring Of Portable Diesel Engine Operated Pumpset For Dewatering Around Workspace Of Pipes, Etc. Excluding Fuel Charges 130 Hiring Ofportable Welding Setetc. Excluding Fuel Charges 131 Structural Steel Work In Single Section Fixed Without Connecting Plate Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 132 Structural Steel Work Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 133 Cutting Charges Of Mild Steel Pipes / Plates Including Cost Of Consumables, Etc.But Excluding The Cost Of Transportation Charges Of Equipment To Site 134 Using Grinder 135 By Gas Cutting 136 Welding Charges Of Prepared Mild Steel Sections, Etc Including Cost Of Consumables, Etc. But Excluding Carriage Of Equipment To Site, Etc. 137 By Electric Welding 138 By Gas Welding 139 Hiring Of Mobile Crane Upto 5 Ton Capacity 140 Hiring Of Excavator For Earthwork Excavation. 141 Fabrication, Providing And Fitting Of Bronze Bush To Bell Mouth / Bowl Unit / Stuffing Box / Sleeve, Or Similar As Per Sample Having Finished Weight As Under: 142 Upto 1.0 Kg 143 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 144 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 145 Extra Per Kg > 5.0 Kgs 146 Fabrication, Providing And Fitting Of Gm Bush With Rubber Insert To Bowl Housing / Bearing Retainer, Etc As Per Sample Having Finished Weight As Under: 147 Upto 1.0 Kg 148 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 149 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 150 Extra Per Kg > 5.0 Kgs 151 Fabrication, Providing And Fitting Of Bronze Lantern ( Cooling ) Ring For Stuffing Box As Per Sample Having Finished Weight As Under: 152 Upto 0.5 Kg 153 Extra Per Kg >0.5 Kg Upto 1 Kgs 154 Extra Per Kg >1.0Kgs Upto 2.0 Kgs 155 Extra Per Kg > 2.0 Kgs 156 Providing And Fitting Of Bronze / Gm Split Gland As Per Sample Having Finished Weight As Under: 157 Upto 1.0 Kg 158 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 159 Extra Per Kg >2.5Kgs Upto 4.0 Kgs 160 Extra Per Kg > 4.0 Kgs 161 Fabrication, Turning And Finishing ( On Inside And Outside ) Of Stainless Steel ( Aisi-410 Or Is 1030 ) Muff Coupling, Etc. As Per Old Sample Having Finished Weight As Under: 162 Fabrication, Turning And Finishing Of Specified Stainless Steel ( Aisi-410 Or Is 1570 ) Shaft Of Specified Dimensions With End Preparation ( Threaded, Etc. ) , Keyway As Per Old Sample Having Finished Weight As Under: 163 Upto 20.0 Kg 164 Extra Per Kg >20.0 Kg Upto 40 Kgs 165 Extra Per Kg >40Kgs Upto 60 Kgs 166 Extra Per Kg > 60 Kgs 167 Fabrication, Turning And Finishing ( On Inside And Outside ) Of Stainless Steel ( Is 1030 ) Shaft Coupling, Etc. As Per Old Sample Having Finished Weight As Under: 168 Fabrication, Turning, Finishing And Fitting Of Stainless Steel ( Aisi-410 Or Is 1570 ) Shaft Sleeve As Per Old Sample, Etc. Having Finished Weight As Under: 169 Manufacturing, Finishing, Providing Of Ss ( Aisi 410 Or Is 1570 ) Key / Impeller Lock Collet As Per Available Sample And Slot Size. 170 Fabrication, Turning And Threading Of Stainless Steel Shaft Stud As Per Old Sample Etc. 171 Manufacturing, Providing And Fitting Of Ss ( Is 1030 ) Check Nut / Impeller Adjusting Nut With Proper Locking Arrangement As Per Sample Available. 172 Providing And Fitting Of Cast Iron Split Gland As Per Sample: 173 Upto 1.0 Kg 174 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 175 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 176 Extra Per Kg > 5.0 Kgs ( Calc. At 7.5Kgs ) 177 Fabrication, Providing And Fitting Of Bronze Casing Ring / Impeller Seal Ring / Sand Collar 178 Upto 1.0 Kg 179 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 180 Extra Per Kg >2.5Kgs Upto 4.0 Kgs 181 Fabrication, Providing And Fitting Of Ms Strainer For Suction Bell, Etc. The Strainer Shall Be Applied With One Coat Of Approved Metal Primer And Two Coats Of Anticorrosive Bituminous Paint To Give An Even Shade. 182 Rethreading Of Bolt Hole Using Appropriate Tap Drill 183 Upto M12 Size Hole / Bore 184 > M12 Size Hole / Bore 185 Repairs To The Existing Damaged Ss Shaft By Way Of Rebuilding Of Shaft Using High Quality Ss Electrodes ( Ador / Advani / Esab Makes ) And Then Turning The Shaft On Lathe Machine To Remove The Excess Material Deposited And Restore The Original Dimensions And Profile Of The Shaft. 186 Shaft Upto 50Mm Diameter At One Damaged Spot On Shaft Length 187 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Upto 50Mm 188 Shaft Of More Than 50Mm Diameter At One Damaged Spot On Shaft Length 189 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Above 50Mm 190 Repairs To The Existing Damaged Ss Shaft End By Way Of Rebuilding Using High Quality Ss Electrodes ( Ador / Advani / Esab Makes ) And Then Turning The Shaft On Lathe Machine To Remove The Excess Material Deposited. The Job Includes Threading Or Collar Rebuilding And Facing, Etc. As Per Requirement And Restore The Original Dimensions And Profile Of The Shaft. 191 Shaft Upto 50Mm Diameter At One Damaged Spot On Shaft End 192 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Upto 50Mm 193 Shaft Of More Than 50Mm Diameter At One Damaged Spot On Shaft End 194 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Above 50Mm 195 Couplingsproviding And Fitting Bush Type Flexible Coupling With Finished Bore And Keyway Of Following Designations ( Preferred Make: Fenner / Lovejoy / Or Equivalent Makes And Designations ) 196 Fbc-1 ( Max. Bore Upto 28Mm ) 197 Fbc-2 ( Max. Bore Upto 30Mm ) 198 Fbc-2A ( Max. Bore Upto 42Mm ) 199 Fbc-3 ( Max. Bore Upto 48Mm ) 200 Fbc-4 ( Max. Bore Upto 65Mm ) 201 Fbc-4A ( Max. Bore Upto 65Mm ) 202 Fbc-5 ( Max. Bore Upto 75Mm ) 203 Providing And Fitting Of Rubber Bush For Bush Type Flexible Couplings As Under: 204 Fbc-1 Upto Fbc-2A 205 Fbc-3 Upto Fbc-8A 206 Fbc-8B Upto Fbc-11 207 Providing And Fitting Of Pin For Bush Type Flexible Couplings As Under: 208 Fbc-1 Upto Fbc-2A 209 Fbc-3 Upto Fbc-7 210 Fbc-7A Upto Fbc-8A 211 Fbc-8B Upto Fbc-10 212 Fbc-10A Upto Fbc-11 213 Providing And Fitting Flexible Tyre Coupling With Finished Bore And Keyway Of Following Designations As Per Is 14285: 214 Tc-104 215 Tc-133 216 Tc 165 217 Tc-197 218 Tc-211 219 Tc-235 220 Tc-254 221 Tc-279 222 Tc-314 223 Tc-359 224 Tc-402 225 Tc-470 226 Tc-508 227 Tc-562 228 Tc-628 229 Providing And Fitting Spare Tyre For Tyre Coupling Of Following Designations As Per Is 14285: 230 Tc-104 231 Tc-133 232 Tc 165 233 Tc-197 234 Tc-211 235 Tc-235 236 Tc-254 237 Tc-279 238 Tc-314 239 Tc-359 240 Tc-402 241 Tc-470 242 Tc-508 243 Tc-562 244 Tc-628 245 Fastenersproviding Of High Tensile Steel Hexagonal Bolts 246 M6 X 50 247 M8 X 80 248 M10 X 80 249 M12 X 80 250 M14 X 90 251 M16 X 100 252 M18 X 50 253 M18 X 125 254 M18 X 150 255 M20 X 100 256 M22 X 90 257 M22 X 125 258 M22 X 150 259 M24 X 90 260 M24 X 100 261 M24 X 150 262 M27 X 120 263 M30 X 110 264 Providing Of Hexagonal Nuts Of Suitable Pitch With Sizes As Under: 265 M6 266 M8 267 M10 268 M12 269 M14 270 M16 271 M18 272 M20 273 M22 274 M24 275 M27 276 M30 277 Providing And Fitting Of Carbon Steel Fasteners Of Assorted Sizes 278 Pump Partsfabrication, Providing And Fitting Of Bronze Bush To Bell Mouth / Bowl Unit / Stuffing Box / Sleeve, Or Similar As Per Sample Having Finished Weight As Under: 279 Upto 1.0 Kg 280 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 281 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 282 Extra Per Kg > 5.0 Kgs 283 Fabrication, Providing And Fitting Of Gm Bush With Rubber Insert To Bowl Housing / Bearing Retainer, Etc As Per Sample Having Finished Weight As Under: 284 Upto 1.0 Kg 285 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 286 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 287 Extra Per Kg > 5.0 Kgs 288 Fabrication, Providing And Fitting Of Bronze Lantern ( Cooling ) Ring For Stuffing Box As Per Sample Having Finished Weight As Under: 289 Upto 0.5 Kg 290 Extra Per Kg >0.5 Kg Upto 1 Kgs 291 Extra Per Kg >1.0Kgs Upto 2.0 Kgs 292 Extra Per Kg > 2.0 Kgs 293 Providing And Fitting Of Bronze / Gm Split Gland As Per Sample Having Finished Weight As Under: 294 Upto 1.0 Kg 295 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 296 Extra Per Kg >2.5Kgs Upto 4.0 Kgs 297 Extra Per Kg > 4.0 Kgs 298 Fabrication, Turning And Finishing ( On Inside And Outside ) Of Stainless Steel ( Aisi-410 Or Is 1030 ) Muff Coupling, Etc. As Per Old Sample Having Finished Weight As Under: 299 Fabrication, Turning And Finishing Of Specified Stainless Steel ( Aisi-410 Or Is 1570 ) Shaft Of Specified Dimensions With End Preparation ( Threaded, Etc. ) , Keyway As Per Old Sample Having Finished Weight As Under: 300 Upto 20.0 Kg 301 Extra Per Kg >20.0 Kg Upto 40 Kgs 302 Extra Per Kg >40Kgs Upto 60 Kgs 303 Extra Per Kg > 60 Kgs 304 Fabrication, Turning And Finishing ( On Inside And Outside ) Of Stainless Steel ( Is 1030 ) Shaft Coupling, Etc. As Per Old Sample Having Finished Weight As Under: 305 Fabrication, Turning, Finishing And Fitting Of Stainless Steel ( Aisi-410 Or Is 1570 ) Shaft Sleeve As Per Old Sample, Etc. Having Finished Weight As Under: 306 Manufacturing, Finishing, Providing Of Ss ( Aisi 410 Or Is 1570 ) Key / Impeller Lock Collet As Per Available Sample And Slot Size. 307 Fabrication, Turning And Threading Of Stainless Steel Shaft Stud As Per Old Sample Etc. 308 Manufacturing, Providing And Fitting Of Ss ( Is 1030 ) Check Nut / Impeller Adjusting Nut With Proper Locking Arrangement As Per Sample Available. 309 Providing And Fitting Of Cast Iron Split Gland As Per Sample: 310 Upto 1.0 Kg 311 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 312 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 313 Extra Per Kg > 5.0 Kgs ( Calc. At 7.5Kgs ) 314 Fabrication, Providing And Fitting Of Bronze Casing Ring / Impeller Seal Ring / Sand Collar 315 Upto 1.0 Kg 316 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 317 Extra Per Kg >2.5Kgs Upto 4.0 Kgs 318 Fabrication, Providing And Fitting Of Ms Strainer For Suction Bell, Etc. The Strainer Shall Be Applied With One Coat Of Approved Metal Primer And Two Coats Of Anticorrosive Bituminous Paint To Give An Even Shade. 319 Rethreading Of Bolt Hole Using Appropriate Tap Drill 320 Upto M12 Size Hole / Bore 321 > M12 Size Hole / Bore 322 Repairs To The Existing Damaged Ss Shaft By Way Of Rebuilding Of Shaft Using High Quality Ss Electrodes ( Ador / Advani / Esab Makes ) And Then Turning The Shaft On Lathe Machine To Remove The Excess Material Deposited And Restore The Original Dimensions And Profile Of The Shaft. 323 Shaft Upto 50Mm Diameter At One Damaged Spot On Shaft Length 324 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Upto 50Mm 325 Shaft Of More Than 50Mm Diameter At One Damaged Spot On Shaft Length 326 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Above 50Mm 327 Repairs To The Existing Damaged Ss Shaft End By Way Of Rebuilding Using High Quality Ss Electrodes ( Ador / Advani / Esab Makes ) And Then Turning The Shaft On Lathe Machine To Remove The Excess Material Deposited. The Job Includes Threading Or Collar Rebuilding And Facing, Etc. As Per Requirement And Restore The Original Dimensions And Profile Of The Shaft. 328 Shaft Upto 50Mm Diameter At One Damaged Spot On Shaft End 329 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Upto 50Mm 330 Shaft Of More Than 50Mm Diameter At One Damaged Spot On Shaft End 331 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Above 50Mm 332 Providing And Fitting Of Carbon Steel Fasteners Of Assorted Sizes 333 Hiring Charges Of Skilled Mechanic ( For Disassembling And Assembling Of Various Itemsetc ) : 334 Hiring Charges Of Labourer For Support Of Mechanic
