Bids Are Invited For 1 Boq Item 1 Two Seater Sofa, Wooden Frame, Ss Pipe Leg, Size In Mm - 1300 ( L ) X 780 ( D ) X 755 ( H ) Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard W, Lucknow-Uttar Pradesh

Bids Are Invited For 1 Boq Item 1 Two Seater Sofa, Wooden Frame, Ss Pipe Leg, Size In Mm - 1300 ( L ) X 780 ( D ) X 755 ( H ) Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam In Seat And In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick ( Minimum ) . The Understructure Shall Consist Of Pipe Frame Leg Of Ss Having Cross-Section Area 30Mm X 30Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm ( D ) X 1040±10 Mm ( W ) , Seat Height = 420±10 Mm, Overall Width = 1300±10 Mm, Overall Minimum Depth = 780±10 Mm & Overall Height = 755±10 Mm. 4 2 Boq Item 2 Centre Table, Ss Pipe Frame Chrome Finish, Plpb Edge Banded Top, 18Mm Thick, Marino 10858 Colour ( 1200 X 600 ) Supplying & Placing Center Table With An Overall Size Minimum 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine. The Side Clad Of The Table Shall Be 18Mm Thick Particle Board. The Under Structure Shall Consist Of Ss 202 Grade Pipe Frame Cross-Section Area 50Mm X 10Mm. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. 2 3 Boq Item 3 Medium Back Chair, Pp Arm, Gas Lift, Chrome Base, Leatherite Tapestry, Swivel Tilt Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Medium Back Chair. The Seat Shall Be Made Of 18Mm Thick Hot Pressed Plywood With Hr Polyurethane Foam 40Mm Thick Having Density Minimum 40Kg / M³ Upholstered With Leatherite Tapestry With 0.8Mm Thick And The Back Shall Be Made Of Hot Pressed Plywood 15Mm Thick With Hr Polyurethane Foam 12Mm Thick Having Density Minimum23kg / M³ Upholstered With Leatherite Tapestry In Tan Colour With Minimum 0.8Mm Thick . The Armrest Shall Be Used Pp Arm Completely Joint With Seat And Back. The Chair Shall Have Swivel Tilt Revolving Mechanism With Single Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 80Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Ms Crca Chrome Plated Having Pitch Circle Dia 650 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 500±10 Mm ( W ) X510±10 Mm ( D ) And Back Size Shall Be 550±10 Mm ( H ) From Seat & Overall Height = 965±10 Mm. 36 4 Boq Item 4 Executive Table, Particle Board Top W1650 X D1900 X H750 Supplying & Placing Executive Table With Credenza Unit And Pedestal Unit In Completely Knock Down Conditions With An Overall Size Minimum 1650Mm X 1900Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Have The Size 1650Mm X 800Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Enclosed With Wire Manager Cap For Electric Provision. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 300Mm. The Trey Shall Be Operated On Sliding Channel. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 1200Mm X 450Mm X 650Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have Atleast 2 Box Drawer, 1 Filing Drawer And 1 Shutter. It Should Be Operated With The Assistance Of Ss Handle, Concealed Crank Hinge And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. It Shall Be Mounted On Injection Moulded Nylon Castor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. The Pedestal Shall Be Mounted Over Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 5 Boq Item 5 Wooden Storage, Particle Board Structure W 1500 X D 450 X H 750 Supplying & Placing Storage Unit With An Overall Size 1500Mm X 450Mm X 750Mm. It Storage Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Facia, Shelf, Skirting Shall Be 18Mm Thick And Base 9Mm Thick. The Top And Side Shall Be Full Round Post Form At Front And Other Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At Minimum 200 Degree Celsius. The Storage Shall Have Minimum 8 Nos. Of Drawer, 1 Nos. Of Adjustable Shelf And 2 Nos. Of Shutter. The Drawer Shall Be Operated With Roller Channel To Enable Smooth Operation And Concealed Crank Hinge With Ss Handle. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key And Shutter Shall Have Mp Lock. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. 20 6 Boq Item 6 Curvilinear Workstation [ Sharing ] Partition : 60Mm Thick Of Height 1200Mm Work-Top : 25Mm Thick Pre-Laminated Particle Board Gable End : 25Mm Thick Pre-Laminated Particle Board Pedestal : 18Mm Thick Pre-Laminated Particle Board, 02 Drawers + 01 Filing , Kbt . Cpu Trolley. Supplying & Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1560Mm X 1410Mm X 1200Mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1500Mm / 600Mm X 1350Mm / 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Curvilinear Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc. The Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Top Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In Front Side Of User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions ( Pre-Treated ) And Duly Powder Coated With 40-60Μ Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways & 4 Ways . The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm ( H ) X 60Mm ( D ) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board ( With Fabric ) Provided At Front Of The User. Laminated Bottom Tile Shall Be Situated Below The Work Top. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data ( Lan ) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots / Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. . Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted On Injection Moulded Nylon Castor. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 470Mm X 286Mm With 18Mm Thick Pre-Laminated Particle Board. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 7 Boq Item 7 Linear Work-Station [ Sharing ] Partition : 60Mm Thick Of Height 1200Mm Work-Top : 25Mm Thick Pre-Laminated Particle Board Gable End : 25Mm Thick Pre-Laminated Particle Board Pedestal : 18Mm Thick Pre-Laminated Particle Board, 02 Drawers + 01 Filing Kbpt & Cpu Trolley Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size Minimum 1320Mm X 600Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc . A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 300Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions ( Pretreated ) And Duly Powder Coated With 40Μ-60Μ Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways & 4 Ways . The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm ( H ) X 60Mm ( D ) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board ( With Fabric ) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data ( Lan ) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots / Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 21 8 Boq Item 8 Low Back Chair, Pu Arm, Pu Moulded Seat & Back, Gas Lift, Nylon Base, Fabric Tapestry. Swivel Tilt Providing And Supplying Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick In Seat And 40Mm Thick In Back. The Same Shall Be Upholstered With Fabric Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of The Chair Shall Be Supplied With Polypropylene Bead On Edges And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine With Back Support. The Seat And Back Shall Be Arrested Together With 50-60Μ Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Made Of Black Integral Metal Insert Polyurethane Arm Completely Joint With Seat And Back. For Seating Durability The Chair Shall Have Swivel Tilt 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standard. The Pedestal Should Have Five Legged Injection Moulded In Black 30% Glass Filled Nylon Having Pitch Circle Dia. 650±15 Mm And Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black Minimum 30% Glass Filled Nylon, Confirming To Ansi / Bifma X5.1-2011 Standard Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 460±10 Mm ( W ) X 450±10 Mm ( D ) And Back Size Shall Be 460±10 Mm ( W ) X 400±10 Mm ( H ) From Seat. Seat Height = 460±10 Mm, Overall Height Shall Be = 810±10 Mm. 63 9 Boq Item 9 Conference Table Table Top, Gable End Made Of 25Mm Thick Pre-Laminated Particle Board, Modesty In 18Mm Thick Pre-Laminated Particle Board, Metal Wire Carrier Width 5700 Depth 5400 Height 750 ( As Per Layout Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size Minimum 5400Mm X 5700Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be With Minifix Dowels, Pins And Ms Brackets. The Top Shall Be Made Up Of Back To Back 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Racetrack Rectangular Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc . The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. Wire Carrier Shall Be Provided Below The Table Top For Power Connection Having Size 60Mm X 125Mm Made Of 0.8Mm Thick High Yield Strength Of Crca Sheet Of Grade D Confirming To Is:513 With Duly Powder Coated. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Manufacturer Shall Have Quality And Safety Assurance Like I0so-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 10 Boq Item 10 High Back Chair, Pp Arms, Gas Lift, Chrome Base, Leatherite Tapestry, Swivel Tilt Supplying And Placing Ergonomically Designed High Back Chair. The Seat Shall Be Made Of 18Mm Thick Hot Pressed Plywood With Hr Polyurethane Foam 40Mm Thick Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Hot Pressed Plywood 15Mm Thick With Hr Polyurethane Foam 12Mm Thick Upholstered With Leatherite Tapestry In Tan Colour With 0.8Mm Thick And 535 Gsm. Headrest Shall Be Provided For Comfort Of Head With Leatherite Tapestry. The Armrest Shall Be Used Pp Arm Completely Joint With Seat And Back. The Chair Shall Have Swivel Tilt Revolving Mechanism With Single Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 80Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Ms Crca Chrome Plated Having Pitch Circle Dia 650 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 500±10 Mm ( W ) X500±10 Mm ( D ) And Back Size Shall Be 720±10 Mm ( H ) From Seat & Overall Height = 1135±10 Mm. 1 11 Boq Item 11 Steel Almirah, 2 Doors, 4 Adjustable Shelf, Thickness 0.8Mm, 915 X 485 X 1980 Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be Minimum 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60Μ. 24 12 Boq Item 12 Steel Almirah, 2 Glass Doors, 4 Adjustable Shelf, Thickness 0.8Mm Providing, Supplying And Placing Steel Almirah. The Overall Size Of The Almirah Shall Be Minimum 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) . The Almirah Shall Be Supplied With 2 Nos. Of Glass Doors With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. The Glass Used Shall Be 4Mm Thick Clear. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Of Each Shelf Shall Be 40 Kg Maximum. Each Rack Shall Be Provided With Stiffener At Bottom For Strength. The Entire Body Panel And Shelf Shall Be Made Of High Yield Strength 0.8Mm Thick And Door 1Mm Thick Crca Sheet Of Grade ‘D’ Confirming To Is: 513. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To The Thickness 40-50Μ Thick. 27 13 Boq Item 13 Steel Library Rack ( Single Face ) , Thickness 0.8Mm ( W925 X D300 X H1800 ) Providing, Supplying And Placing An Open Display Book Racks. The Overall Size Of The Rack Shall Be Minimum 925Mm ( W ) X 300Mm ( D ) X 1800Mm ( H ) . The Rack Shall Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Levels. Rack, Side Panel, Skirting Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Side And Top Shall Be Covered With 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Edges Of The Board Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Add-On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Panel. Back Panel Up To The Bottom Of Third Rack Shall Have Additional Rigidity. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 80 Kg Maximum. Each Rack Shall Be Provided With Stiffener At Bottom For Strength. Label Holder & Range Indicators On Each Main Unit For Inserting Labels. All Steel Components Shall Be Epoxy Polyester Powder Coated To The Thickness Of 40-60Μ. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. 9 14 Boq Item 14 Conference Table, Particle Board Edge Banded Top, 25 Mm Thick, W1800 X D900 X H750 Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size Minimum 1800Mm X 900Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape With Round Front And Back And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine. The Table Shall Be Supported On Ms Powder Coated Pipe Frame Having Cross-Section Area 40Mm X 20Mm. The Understructure Shall Consist Of Crca Powder Coated 2 Nos. Vertical Round Pipe With Dia. 110Mm. The Four Legs Shall Be Made Up Of Ms Chrome Plated Round Pipe Of Dia. 38Mm. A Crca Chrome Plated Round Pipe Of Dia. 38Mm Shall Be Placed Between Legs For Structural Support. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso- 9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 2 15 Boq Item 15 Executive Table, Mdf Veneer Pu Structure, Top - 2200 X 1000 X 750 Eru - 2200 X 600 X 600 Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size Minimum 2450Mm X 2200Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 2200Mm X 1000Mm X 76Mm Thick Made Up Of Medium Density Fibre-Board With Approved Veneer Laminate And Pu Polish Accordingly. The Table Top Profile Shall Be In Rectangle Shape With Round Corners And Full Round Post Forming Edges. The Table Top Shall Be Supported On Mdf Board Based Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 76Mm Thick Medium Density Fibreboard And Profile Shall Be In Moulded Construction With Full Round Post Forming Edges And Duly Deco Painted. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Medium Density Fibre-Board In Linear Shape With Appropriate Pvc Edge Banding And Veneer Laminate. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 2200Mm X 600Mm X 600Mm. It Shall Have 2 Nos. Of Drawer, 1 Nos. Of Filling Space With Door And 1 Nos Of Open Space . The Drawer Shall Be Operated With Profile Handle And Easily Close & Open With The Assistance Of Sliding Channels To Enable Smooth Operation And Sliding Rail Track And Concealed Crank Hinge. Drawer Facai, Sides And All Other Shall Be Made In Min 18Mm Thick And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Complete Structure Shall Be Supplied With Approved Veneer Laminate, Pu Polish And Deco Painted. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. 2 16 Boq Item 16 Back Unit - 1800 [ W ] X400 [ D ] X200 0 [ H ] Mm [ Storage Facia & Top Veneer Rest-All Laminated ] Wooden Storage Plpb Side Glass Door, Veneer Finish. Supplying & Placing Storage Unit With An Overall Size Minimum 1800Mm X 400Mm X 2000Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Veneer Laminate And Finish As Per Approved Shade. The Top Of The Storage Shall Have Minimum 50Mm Thick Cantor Top With Full Round Post Form. All Other Profile I.E. Side, Back, Shutter, Shelf, Skirting Shall Be 18Mm Thick And Base 9Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Be Supplied With 12 Nos. Of Shelf, 2 Nos. Of Drawer And 6 Nos. Of Door Shutter. The Glass Shutter Shall Be Used With 4Mm Thick Clear Glass Insert Within Plpb Profile. The Shutter And Drawer Shall Be Operated With Concealed Crank Hinge And Roller Channel As Well As Ss Handle. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Molding Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. 2 17 Boq Item 17 High Back Chair, Metal Chrome With Cushion Arms, Knee Tilt, Gas Lift, Chrome Plated Base, Leatherite Tapestry Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 30+25 ) Mm Thick And The Back Shall Be Made Of ( 15+6 ) Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 30Mm Thick . The Same Shall Be Upholstered With Leatherite Tapestry 1Mm Thick . The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support & Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Chrome Plated Arm With Cushion Having Leatherite Covering Top. For Seating Durability The Chair Shall Have Knee Tilt 360 Degree Revolving Mechanism Having Four Position Locking And Tilt Tension Adjustment With Anti-Shock Feature Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Ms Crca Chrome Plated Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Shall Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma X5.1-2011 Standards Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 515±10 Mm ( D ) X 545±10 Mm ( W ) And Back Size Shall Be 560±10 Mm ( W ) X 700±10 Mm ( H ) From Seat. Overall Height Shall Be = 1155±10 Mm, Overall Depth / Width = 760±10 Mm. 2 18 Boq Item 18 Visitor Chair, Metal Chrome With Cushion Arm, Chrome Plated Pipe Stand, Leatherite Tapestry Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort & Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 30+25 ) Mm Thick And The Back Shall Be Made Of ( 15+6 ) Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 30Mm Thick . The Same Shall Be Upholstered With Leatherite Tapestry 1Mm Thick And Minimum 571 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied Chrome Plated Fixed Arm With Cushion Having Leatherite Covering Top And Seat And Back Shall Be Arrested Together With Powder Coated Hr Steel Spine. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Capsule Pipe Of Size 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm ( D ) X 545±10 Mm ( W ) And Back Size Shall Be 560±10 Mm ( W ) X 520±10 Mm ( H ) From Seat. Overall Height Shall Be = 990±10 Mm, Overall Depth = 660±10 Mm & Overall Width = 680±10 Mm. 19 Boq Item 19 Three Seater Sofa, Wooden Frame, Powder Coated Pipeleg, Seat Back Leatherite Tapestry, Size In Mm - 2020 ( L ) X 750 ( D ) X 665 ( H ) Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density Minimum 40Kg / M³ In Seat And Minimum32kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density Minimum40kg / M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And Minimum 571 Gsm. The Sofa Shall Be Supported On Ms Powder Coated Pipe Frame Having Size 40Mm X 20Mm. The Under Structure Shall Consist Of Ms Powder Coated Round Leg With Upper Dia. 38Mm And Lower Dia. 30Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 570±10 Mm ( D ) X 1660±10 Mm ( W ) , Seat Height = 425±10 Mm, Overall Width = 2020±10 Mm, Overall Depth = 750±10 Mm & Overall Height = 680±10 Mm. 2 20 Boq Item 20 Single Seater Sofa, Wooden Frame, Powder Coated Pipe Leg, Seat Back Leatherite Tapestry, Size In Mm - 960 ( L ) X 750 ( D ) X 665 ( H ) Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density Minimum40kg / M³ In Seat And Minimum32kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density Minimum 40Kg / M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Sofa Shall Be Supported On Ms Powder Coated Pipe Frame Having Size 40Mm X 20Mm. The Under Structure Shall Consist Of Ms Powder Coated Round Leg With Upper Dia. 38Mm And Lower Dia. 30Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 570±10 Mm ( D ) X , Seat Height = 425±10 Mm, Overall Width = 960±10 Mm, Overall Depth = 750±10 Mm & Overall Height = 680±10 Mm. 4 21 Boq Item 21 Centre Table, Ss Pipe Frame, Chrome Finish, Toughned Black Glass, Top 12Mm Thick, Lower Glass 8Mm Thick 1200 X 600 Supplying & Placing Center Table With An Overall Size Minimum 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of Minimum 12Mm Thick Toughened Glass. The Profile Shall Be In Rectangle Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 1155Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. 2 22 Boq Item 22 Visitor Chair, Pu Arm, Powder Coated Pipe Stand, Leatherite Tapestry Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Metal Insert Pipe Frame Padded With High Resiliance Polyurethane Foam ( 30+19 ) Mm Thick Having Density Minimum ( 60+40 ) Kg / M³ In Seat 19Mm Thick Having Density Minimum23kg / M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And Minimum 535 Gsm. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Lumbar Support. The Armrest Shall Be Used Polyurethane Arm Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms / Crca Powder Coated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm ( W ) X 470±10 Mm ( D ) And Back Size Shall Be 460±10 Mm ( H ) From Seat & Overall Height = 870±10 Mm. 2 23 Boq Item 23 Wooden Bed, Particle Board Structure, Powder Coated Pipe Frame, Ppcp Shoes 2060 ( L ) X 1131 ( B ) X 930 ( H ) With Mattress Supplying And Placing Single Bed With An Overall Size Minimum 2060Mm ( L ) X 1131 ( B ) X 930Mm ( H ) . Head And Tail Panel Shall Be Made Of Minimum18mm Thick Pre Laminated Particle Board And Baton Shall Be Made Of Minimum 32Mm Thcik Mdf Board Duly Bull Nose Shape. Sides Baton Shall Be Made Of 32Mm Thick Mdf Board ( One Side Full Round Post Forming ) And 18Mm Thick Particle Board With 2Mm Thick Pvc Edge Banding . Mattress Panel Shall Be Made Of Minimum 18 Mm Thick Particle Board. The Understructure Shall Consist Of Ms Channles In 1Mmm Thickness. Horizontal And Bottom Plinth Shall Be Made Of 25Mm Thick Pre Laminated Particle Board. 2 24 Boq Item 24 Bedside Table Plpb Board 400 X 400 X 415 Supplying And Placing In Position Of Bed Side Tableof Approved Make Colour With Superior Design And As Per Approved Drawing & Design Of Engineer-Incharge. Minimum Overall Size : Depth - 461.0 Mm Width - 460.0 Mm Height - 510.0 Mm Material : Body Panels Of Bed Side Table Are Made Of Minimum 18 Mm Thick Prelaminated Particle Board .All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Drawer Front & Door Are Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trim Fixed On To It As Per Direction Of Engineer-In-Charge. Hardware : The High Quality Hardware Used Like Roller Slides, Hinges , Minifix, Dowels Is Of Make Hettich . Construction : Knock Down Construction. Finish :. Minimum18 Mm Thick Prelaminated Particle Board Is In Maple Shade.The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso:9001, Iso:50001, Iso:14001, Iso 45001:2018, Bifma, & Aiota. One Or More Product Shall Be Certified From Green Guard Ul Of Usa. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso:9001, Iso:50001, Iso:14001, Iso 45001:2018, Bifma, Aiota For One Or More Product, Green Guard Certificate For Any One Product Atlest Issued By Ul Of Usa. . 25 Boq Item 25 Executive Table, Particle Board Top W2250 X D2100 X H750 Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size Minimum 2250Mm X 2100Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1900Mm X 900Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Shall Be 50Mm Thick On Edges, After 100Mm From Edges It Should Be 25Mm Thick. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel .. The Table Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.6Mm Thick. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 50Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 2100Mm X 600Mm X 641Mm. The Side Unit Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Drawer Base 9Mm Thick & Other Parts 18Mm Thick Like Shutter, Back, Facia, Top Etc. It Shall Have Minimum 3 Drawer, 1 Shutter And 2 Sliding Shutter. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Lock. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet , Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 4 26 Boq Item 26 Wooden Storage, Particle Board Structurew 1200 X D 400 X H 1850 Supplying & Placing Storage Unit With An Minimum Overall Size Minimum 1200Mm X 400Mm X 1850Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc. The Storage Shall Have Minimum 6 Nos. Of Fixed Shelf And 6 Nos. Of Door Shutter For Ease Of Opening. . There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso- 9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Boards Used Should Meet , Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. 5 27 Boq Item 27 High Back Chair, Wooden Cushion Arm, Torsion Bar, Gas Lift, Chrome Base Providing And Supplying High Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 50+25 ) Mm Thick Having Density Minimum ( 40, 32 ) Kg / M³ And The Back Shall Be Made Of Double Layered Moulded Plywood ( 12+6 ) Mm Thick Padded With High Resilience Polyurethane Foam ( 30+12 ) Mm Thick Having Density Minimum ( 32, 23 ) Kg / M³. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And Minimum 535 Gsm. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support As Well As Head Support. The Chair Shall Be Supplied With Cushion Arm Having Leatherite Covering Top. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm ( D ) X 500±10 Mm ( W ) And Back Size Shall Be 515±10 Mm ( W ) X 715±10 Mm ( H ) From Seat. Overall Height Shall Be = 1165±10 Mm, Base Width / Depth = 760±10 Mm. 5 28 Boq Item 28 Visitor Chair, Cushion Arm, Chrome Plated Pipe Stand, Leatheritte Tapestry Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort & Shall Have Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foamminimum ( 50+25 ) Mm Thick Having Densityminimum ( 40, 32 ) Kg / M³ And The Back Shall Be Made Of Double Layered Moulded Plywood Minimum ( 12+6 ) Mm Thick Padded With High Resilience Polyurethane Foam Minimum ( 32+12 ) Mm Thick Having Density Minimum ( 32, 23 ) Kg / M³. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied With Cushion Arm Having Leatherite Covering Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms Crca Chrome Plated Tubular Pipe Of Size 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm ( D ) X 515±10 Mm ( W ) And Back Size Shall Be 515±10 Mm ( W ) X 540±10 Mm ( H ) From Seat. Overall Height Shall Be = 945±10 Mm, Overall Depth = 690±10 Mm & Overall Width = 580±10 Mm. 29 Boq Item 29 Three Seater Sofa, Wooden Frame, Ss Pipe Leg Frame, Sear Back Leatherite Tapestry, Size In Mm - 1900 ( L ) X 770 ( D ) X 800 ( H ) Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density Minimum 40Kg / M³ In Seat And Minimum 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Densityminimum 40Kg / M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And Minimum 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm ( D ) X 1540±10 Mm ( W ) , Seat Height = 435±10 Mm, Overall Width = 1860±10 Mm, Overall Depth = 770±10 Mm & Overall Height = 780±10 Mm. 1 30 Boq Item 30 ( As Per Layout Room Size : 16340X7870mm ) Conf Erence Table Table Top, Gable End Made Of 25Mm Thick Pre-Laminated Particle Board, Modesty In 18Mm Thick Pre-Laminated Particle Board, Metal Wire Carrier ( 13200 X4200x 750 ) Mm Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 13200Mm X 4200Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be With Minifix Dowels, Pins And Ms Brackets. The Top Shall Be Made Up Of Back To Back 25Mm Thick Prelaminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Racetrack Rectangular Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel . The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. Wire Carrier Shall Be Provided Below The Table Top For Power Connection Having Size 60Mm X 125Mm Made Of 0.8Mm Thick High Yield Strength Of Crca Sheet Of Grade D Confirming To Is:513 With Duly Powder Coated. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Manufacturer Shall Have Quality And Safety Assurance Like I0so- 9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 1 31 Boq Item 31 High Back Chair, Pipe Frame, Pu Chrome Arm, Gas Lift, Chrome Base, Leatherite Tapestry, Swivel Tilt Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing High Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Curved Plywood Upholstered With High Resilience Polyurethane Foam 50Mm Thick Having Density Minimum 40Kg / M³ With Khaki Leatherite Tapestry 0.8Mm Thick And 535 Gsm And The Back Shall Be Supported By Metal Insert Ms Crca Frame Upholstered With High Resilience Polyurethane Foam 12Mm Thick Having Density Minimum 23Kg / M³ With Khaki Leatherite Tapestry 0.8Mm Thick And Minimum 535 Gsm With Contoured Lumbar Support Which Helps To Provide Full Back Support And Maintain The Natural Curvature Of The Spine. Headrest Shall Be Provided For Comfort Of Head With Leatherite Tapestry. The Armrest Shall Be Used Ms Crca Chrome Plated With Pu Arm Completely Joint With Seat And Back. The Chair Shall Have Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Upto 100Mm With Bifma Standard Class-3 Gaslift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Shall Be Made Up Of Ms Crca Chrome Plated Having Pitch Circle Dia 640 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 485±10 Mm ( W ) X520±10 Mm ( D ) And Back Size Shall Be 740±10 Mm ( H ) From Seat, Overall Height = 1150±10 Mm And Overall Depth / Width= 740±10Mm. 4 32 Boq Item 32 Medium Back Chair, Pipe Frame, Pu Chromearm, Gas Lift, Chrome Base, Leatherite Tapestry, Swivel Tilt Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Inserted Pipe Frame. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 12Mm Thick Having Density 23Kg / M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8±0.1 Mm Thick And 535 Gsm And Breathable Mesh Tapestry Behind The Backrest. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. A Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. For Seating Durability The Chair Shall Have Swivel Tilt 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standards. The Pedestal Shall Have Five Legged Crca Chrome Plated Having Pitch Circle Dia. 650Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled, Confirming To Ansi / Bifma Standards X5.1-2011 Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 490±10 Mm ( W ) X 520±10 Mm ( D ) And Back Size Shall Be 450±10 Mm ( W ) X 535±10 Mm ( H ) From Seat & Overall Height = 980±10 Mm, Overall Width = 560±10 Mm & Overall Depth = 670±10 Mm 33 Boq Item 33 Visitor Chair, Pipe Frame, Pu Chrome Arm, Chrome Plated Pipe Stand, Leatherite Tapestry, Chrome Plated Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort & Shall Have Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ In Seat And 12Mm Thick Having Density 23Kg / M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1Mm Thick, 535 Gsm And Breathable Mesh Tapestry Behind The Backrest. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm ( W ) X 510±10 Mm ( D ) And Back Size Shall Be 450±10 Mm ( W ) X 540±10 Mm ( H ) From Seat & Overall Height = 980±10 Mm, Overall Width = 560±10 Mm. 20 34 Boq Item 34 Three Seater Desk, Plpb Edge Banded Top, Seat & Back, Powder Coated Pipe Frame, Top Size - 1500 X 400 X 18Mm Thick Overall Size - 1500 X 980 X 750 Providing And Supplying Desk-Cum-Bench ( Three Seater ) With An Overall Size 1560Mm X 980Mm X 750Mm. The Top Of The Desk Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Having Cross-Section Area 25Mm X 25Mm With 1.2Mm Thick. The Shelf Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board With 2Mm Thick Pvc Edge Banding. It Should Be Supported On Crca Rectangle Pipe Having Cross-Section Area 25Mm X 25Mm With 1.2Mm Thick. The Side Panel Of The Table Shall Be Made Of Crca Rectangle Pipe Having Cross-Section Area 40Mm X 20Mm With 1.2Mm Thick Placed In Vertical Position At Both Side Of The Desk And Bench. Hooks Should Be Provided On The Vertical Side Frame On Both Side Of The Desk For Hanging Bags / Bottles. The Front Of The Desk Shall Be Clad With Modesty Panel Made Up Of 18Mm Thick Pre-Laminated Particle Board Hinged With Front Pipe Frame. The Seat And Back Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And The Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Seat And Back Shall Be Supported On Crca Square Pipe Having Cross-Section Area 25Mm X 25Mm With 1.2Mm Thick And 19Mm X 19Mm With 1.2Mm Thick Respectively. 2 Nos. Footstep Shall Be Provided For Structural Support Of The Desk Having Cross-Section Area Of The Pipe 40Mm X 20Mm With 1.2Mm Thick. The Complete Steel Structure Shall Be Welded With Base Pipe Having Cross-Section Area 40Mm X 20Mm With 1.2Mm Thick And Also Be Epoxy Polyester Powder Coated To The Thickness 50-60Μ Thick. There Shall Be Shoe Provided At The Base To Avoid Scratches As Well As Uneven Surfacing. The Size Of The Writing Top Shall Be 1050Mm ( W ) X 400Mm ( D ) , Seat Size Shall Be 1050Mm ( W ) X 300Mm ( D ) , Back Size Shall Be 1050Mm ( W ) X 200Mm ( H ) . All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso- 14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification 14 35 Boq Item 35 High Back Chair, Pu Chrome Arm, Gas Lift, Chrome Base, Fabric Tapestry, Synchro Tilt Providing And Supplying High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 15Mm Thick And ( 15+6 ) Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density Minimum 40Kg / M³ In Seat And 25Mm Thick Having Densityminimum 32Kg / M³ In Back. The Same Shall Be Upholstered With Fabric Tapestry 0.6Mm Thick And Minimum 235 Gsm. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Lumbar Support As Well As Head Support. The Seat And Back Shall Be Arrested Together With 40-60Μ Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Polyurethane Arm Mounted On Round Pipe Frame Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Tilt 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 80Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi / Bifma X5.1-2011 Standard. The Pedestal Should Have Five Legged Ms / Crca Chrome Plated Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castor Of The Chair Should Be Injection Moulded In Black Nylon 30% Glass Filled, Confirming To Ansi / Bifma X5.1-2011 Standard Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm ( W ) X 485±10 Mm ( D ) And Back Size Shall Be 710±10 Mm ( H ) From Seat & Overall Height = 1150±10 Mm. 10 36 Boq Item 36 Visitor Chair, Wooden Arm, Chrome Plated Pipe Stand, Fabric Tapestry Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick And ( 15+6 ) Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam 50Mm Thick In Seat And 25Mm Thick Having In Back. The Same Shall Be Upholstered With Fabric Tapestry 0.6Mm Thick And 235 Gsm. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Lumbar Support. The Seat And Back Shall Be Arrested Together With 50-60Μ Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Wooden Arm With Melamine Polish Mounted On Round Pipe Frame. The Understructure Shall Consist Of Cantilever Support Frame Made Up Of Ms / Crca Round Pipe Having Dia. 28.5Mm With 2Mm Thick. The Seat Size Shall Be 480±10 Mm ( W ) X 485±10 Mm ( D ) And Back Size Shall Be 470±10 Mm ( H ) From Seat & Overall Height = 915±10 Mm. 37 Boq Item 37 Wooden Storage, Particle Board Structure W 900 X D 450 X H 750 Supplying & Placing Storage Unit With An Overall Size 900Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Shelf, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc. The Storage Shall Have 1 Nos. Of Adjustable Shelf And 2 Nos. Of Door Shutters Shall Be Provided For Opening And Closing The Storage. . To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. 2 38 Boq Item 38 Partition : 60Mm Thick Of Height 1200Mm Work-Top : 25Mm Thick Pre-Laminated Particle Board Gable End : 25Mm Thick Pre-Laminated Particle Board Pedestal : 18Mm Thick Pre-Laminated Particle Board Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1000Mm X 600Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 880Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions ( Pre-Treated ) And Duly Powder Coated With 40Μ-60Μ Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways & 4 Ways ( L-Cover For Corner, T-Cover For Middle Section Wherever Required ) . The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm ( H ) X 60Mm ( D ) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board ( With Fabric ) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data ( Lan ) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots / Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor.To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 39 Boq Item 39 Workstation Table, Panel Based Partition, W1320 X D660 X H1200 Particle Board Edge Banded Top Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1320Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions ( Pre-Treated ) And Duly Powder Coated With 40Μ-60Μ Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways & 4 Ways ( L-Cover For Corner, T-Cover For Middle Section Wherever Required ) . The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm ( H ) X 60Mm ( D ) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board ( With Fabric ) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data ( Lan ) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots / Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. 16 40 Boq Item 40 Stool, Without Arm, Chrome Plated Pipe Frame With Foot Rest, Nylon Base, Gas Lift, Seat & Back Leaherite Tapestry Supplying And Placing Bar Stool. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Polyurethane Foam 30Mm Thick And The Back Shall Be Made Of Metal Insert Pipe Upholstered With High Resiliance Polyurethane Foam 25Mm Thick Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Seat And Back Shall Be Fixed With Metal Pipe. The Chair Shall Have 360 Revolving Mechanism. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Upto 240Mm With Bifma Standard Class-3 Gaslift To Suit Them Using The Lever Under The Seat. Footrest Shall Be Provided Of Ms Chrome Plated Round Pipe Of Dia 16Mm. The Pedestal Shall Be Made Up Of Injection Moulded Black Nylon Having Pitch Circle Dia 650 Mm Fitted With 5 Nos. 50Mm Gliders Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled. The Seat Shall Be 440±10 Mm ( D ) X 455±10 Mm ( W ) And Back Size Shall Be 535±10 Mm ( W ) X 260±10 Mm ( Ht ) From Seat. Overall Height Shall Be = 875±10 Mm. 16 41 Boq Item 41 Steel Almirah, 2 Glass Doors, 2 Steel Doors, Adjustable Shelf, Thickness 0.8Mm ( W900 X D450 X H1830 ) Providing, Supplying And Placing Steel Almirah. The Overall Size Of The Almirah Shall Be 900Mm ( W ) X 450Mm ( D ) X 1830Mm ( H ) . The Almirah Shall Be Supplied With 2 Nos. Of Glass Door And 2 Nos. Of Steel Door With Adjustable Shelves. The Door Shall Be Operated With Aesthetically Appealing Snap Fit Abs Plastic Handle And Concealed Crank Hinge. The Glass Shall Be Used 4Mm Thick Clear. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Of Each Shelf Shall Be 40 Kg Maximum. Each Rack Shall Be Provided With Stiffener At Bottom For Strength. The Entire Body Panel, Shelf Shall Be Made Of High Yield Strength 0.8Mm Thick Crca Sheet Of Grade ‘D’ Confirming To Is: 513. To Protect The Ball From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At The Bottom. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To The Thickness 40-60Μ Thick. 42 Boq Item 42 ( Size As Per Layout ) Lab Table Wall Side ( 4575 X 750 X 900 Mm ) Overall Size 4775Mm L X 750Mm D X 900Mm H Made Up Of C-Frame Understructure. All Sheet Metal Items Shall Be Of Crca As Per Is 513:1994. C-Frame Made Of Rectangular Pipe With Cross Section Of 60Mm X 30Mm & 2 Mm Thick With Feet Tolerance Of -5Mm To +20Mm & Skirting At Bottom Side. Horizontal Members To Connect C Frame Shall Be Made Of Rectangular Pipes Of Crca Ms 2Mm Thick Of Pipe Dimension 60 X 30 X 2 Mm. Side Cover Panels, Back Panels Should Be Made From Crca Ms Panels Of 0.8Mm Thick. Electrical Trunking Having Electrical Switches 16A & 32 Sockets 16A With Six Module Plates. Welded Understorage Cabinet With Intersection Of Vertical And Horizontal Members Having Provision To Be Relocated Anywhere Easily As An Independent Unit. Doors Should Be Assembled With Hinge Assembly. Intermediate Horizontal Channels Should Be Provided Between Door And Drawer. Shelf Should Bebend Panel With 20Mm Height. Single Piece Drawer Tray Supported On Lh And Rh Ball Slide To Be Provided. Knee Space Panel Shall Be In 22 Gauge Construction. 3Understorages Of Size 600Mm W X 530Mm D X 635Mm H Should Be Supplied Having 1 Drawer & 2 Shutters. Thickness Of Storage Unit Lh / Rh Panels, Shutter Front, Bottom Panel, Top Front, Drawer Separator, Alignement Channel, Back Panel, Shutter Cover, Fr. Rack Strip, Top Cover Should Be Of 0.8Mm Thick. Handle Polypropylene Recessed-Type. Lock Facility With 180° And 10 Lever Cam Lock Mechanism ( Except For Sink And Corner Unit ) . Shutter Should Be Of Single-Type Construction. Ball Slide: 500Mm Length ( Required Only For Drawer Unit ) . Shutter Should Have Provision Of Roller Catch. Worktop Should Be 19Mm ( + / - 2Mm ) Thick Black Granite Worktop With Exposed Edges Chamfered. All Steel Frame-Work Is Should Be Pretreated With Superior Epoxy Powder Coated Finish. 2 43 Boq Item 43 ( Size As Per Layout ) Lab Table With Alternate Understorage Electrical Fitting , Reagent Rack With Sink Overall Size 3560Mm L X 1500Mm D X 900Mm H Made Up Of C-Frame Understructure. All Sheet Metal Items Shall Be Of Crca As Per Is 513:1994. C-Frame Made Of Rectangular Pipe With Cross Section Of 60Mm X 30Mm & 2 Mm Thick With Feet Tolerance Of -5Mm To +20Mm & Skirting At Bottom Side. Horizontal Members To Connect C Frame Shall Be Made Of Rectangular Pipes Of Crca Ms 2Mm Thick Of Pipe Dimension 60 X 30 X 2 Mm. Side Cover Panels, Back Panels Should Be Made From Crca Ms Panels Of 1.0Mm Thick. Fixed Type Crca Double Sided Ms Reagent Shelves Consisting Of 2 Stage Horizontal Storage Shelves Having Electrical Switches 16A & 24 Sockets 16A With Six Module Plates. Welded Understorage Cabinet With Intersection Of Vertical And Horizontal Members Having Provision To Be Relocated Anywhere Easily As An Independent Unit. Doors Should Be Assembled With Hinge Assembly. Intermediate Horizontal Channels Should Be Provided Between Door And Drawer. Shelf Should Be Bend Panel With 20Mm Height. Single Piece Drawer Tray Supported On Lh And Rh Ball Slide To Be Provided. Knee Space Panel Shall Be In 22 Gauge Construction. 4 Understorages Of Size 600Mm W X 530Mm D X 635Mm H Should Be Supplied. 2 Having 1 Drawer & 2 Shutters And Six Having Only 2 Shutters. Thickness Of Storage Unit Lh / Rh Panels, Shutter Front, Bottom Panel, Top Front, Drawer Separator, Alignement Channel, Back Panel, Shutter Cover, Fr. Rack Strip, Top Cover Should Be Of 0.8Mm Thick. Handle Polypropylene Recessed-Type. Lock Facility With 180° And 10 Lever Cam Lock Mechanism ( Except For Sink And Corner 503624 Unit ) . Shutter Should Be Of Single-Type Construction. Ball Slide: 500Mm Length ( Required Only For Drawer Unit ) . Shutter Should Have Provision Of Roller Catch. Worktop Should Be 19Mm ( + / - 2Mm ) Thick Black Granite Worktop With Exposed Edges Chamfered. 2 Pp Sink Of Size 490Mm X 405Mm & Depth 200Mm. Bowl Size 430 Mm X 350Mm. All Steel Frame-Work Is Should Be Pre-Treated With Superior Epoxy Powder Coated Finish. 1 Boq Item 44 Microphone Sytem : Chairman Supplying And Placing Microphone Sytem : Chairman - Appart From Above Delegate Unit Functions It Also Has Priority Switch With Led When Priority Switch Is Pressed A Tone Is Generated To Seek Attention And Mute The Active De;Egate Mics , Highly Sensitive And Unidirectional Condensor Microphone Provided With Diffused Led Housing The Built In Speaker In Each Unit Provides Clear And Crisp Sound Reinforcement The Outputlevel Of The Speaker Can Be Adjusted Through Voloume Control Each Microphone Has Talk Switch And Talk Led Which Flickers To Indicate 2 2 Boq Item 45 Microphone Sytem : Deligate Supplying And Placing Microphone Sytem : Deligate - Highly Sensitive And Unidirectional Condensor Microphone Provided With Diffused Led Housing The Built In Speaker In Each Unit Provides Clear And Crisp Sound Reinforcement The Outputlevel Of The Speaker Can Be Adjusted Through Voloume Control Each Microphone Has Talk Switch And Talk Led Which Flickers To Indicate 23 3 Boq Item 46 Microphone Sytem : Chairman Supplying And Placing Microphone Sytem : Chairman - Appart From Above Delegate Unit Functions It Also Has Priority Switch With Led When Priority Switch Is Pressed A Tone Is Generated To Seek Attention And Mute The Active De;Egate Mics , Highly Sensitive And Unidirectional Condensor Microphone Provided With Diffused Led Housing The Built In Speaker In Each Unit Provides Clear And Crisp Sound Reinforcement The Outputlevel Of The Speaker Can Be Adjusted Through Voloume Control Each Microphone Has Talk Switch And Talk Led Which Flickers To Indicate 4 4 Boq Item 47 Microphone Sytem : Deligate Supplying And Placing Microphone Sytem : Deligate - Highly Sensitive And Unidirectional Condensor Microphone Provided With Diffused Led Housing The Built In Speaker In Each Unit Provides Clear And Crisp Sound Reinforcement The Outputlevel Of The Speaker Can Be Adjusted Through Voloume Control Each Microphone Has Talk Switch And Talk Led Which Flickers To Indicate 5 Boq Item 48 Microphone Sytem : Supplying And Placing Microphone Sytem : Controller For Confrence Systems 3 6 Boq Item 49 Microphone Sytem Supplying And Placing Microphone Sytem :Patching Cords And Installation , Testing And Commisioning Of Full Systems 3 7 Boq Item 50 Display Pannel - Led Hd Smart Tv 42 Inches Supplying And Placing Led Hd Smart Tv 42 Inches, Hdr Enabled Displays Will Expand The Contrast Ratio And Colour Space To Offer A More Realistic And Natural Image Closer To The Way Your Eyes Actually See The Real World. Deep Blacks Are Combined With Very Bright Highlights To Produce A Level Of Reality Not Previously Possible 3 8 Boq Item 51 Display Pannel - Led Hd Smart Tv 65 Inches Supplying And Placing Led Hd Smart Tv 65 Inches, Display Pannel - Led Hd Smart Tv 65 Inches 65″ 4K Uhd ( 3840 X 2160 ) Resolution Android Led Display With Built In 2.4 Ghz Wifi, 1.1 Ghz Built In Quad Core Processor, 2 Gb Ddr3 Ram, 16 Gb Memory, Built In Triple Core Mali 600 Mhz Gpu 1 9 Boq Item 52 Interactive Screen For Traning Room 55″ 4K Uhd ( 3840 X 2160 ) Resolution Interactive Screen For Traning Room 55″ 4K Uhd ( 3840 X 2160 ) Resolution Android Led Display With Built In 2.4 Ghz Wifi, 1.1 Ghz Built In Quad Core Processor, 2 Gb Ddr3 Ram, 16 Gb Memory, Built In Triple Core Mali 600 Mhz Gpu, With Hdr 10, Dolby Audio, Built In Wifi And Cromecast, Hdmi Cec, Hdmi Arc, Built-In Bluetooth Ver.4, 20W Built In Speakers, Hdmi 2.0 X 3, Av X 1, Usb 2.0 X 1, Rj45 X 1 ( Network Connectivity Only ) , Headphone Out X 1, Spdif Out X 1 Boq Item 53 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge . 3.5X2.5 In Squre Meter 1 9.00 2 Boq Item 54 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .4X2.5 In Squre Meter 5.00 3 Boq Item 55 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .2X2.5 In Squre Meter 4.00 4 Boq Item 56 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .4.5X2.5 In Squre Meter 1 3.00 5 Boq Item 57 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .6X2.5 In Squre Meter 2.00 6 Boq Item 58 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .3X2.5 In Squre Meter 1 0.00 7 Boq Item 59 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .2.5X2.5 In Squre Meter 2.00 8 Boq Item 60 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge . 1X2.5 In Squre Meter 9 Boq Item 61 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .11X2.5 In Squre Meter 1.00 10 Boq Item 62 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge .5X2.5 In Squre Meter 2.00 11 Boq Item 63 Roller Blinds Providing & Supply Of Roller Fabric Designer Blinds With Head Rail Vista / Vl / Vista / Vl / Marvel Or Equivalent Make & Installation For Window As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Arthitect / Engineer -In- Charge . 10.5X2.5 In Squre Meter 1.00 12 Boq Item 64 Wooden Finish Metal Curtain Rod For Door Providing &Supply Of Wooden Finish Metal Curtain Rod For Door As Per The Approved Desgin All Complete As Per Drawing , Specification And Direction As Approved By The Architect / Engineer -In -Charge 1.2X2.5 In Running Meter 40.00 13 Boq Item 65 Wooden Finish Metal Curtain Rod For Door Providing &Supply Of Wooden Finish Metal Curtain Rod For Door As Per The Approved Desgin All Complete As Per Drawing , Specification And Direction As Approved By The Architect / Engineer -In -Charge 1X2.5 In Running Meter 1.00 14 Boq Item 66 Wooden Finish Metal Curtain Rod For Door Providing &Supply Of Wooden Finish Metal Curtain Rod For Door As Per The Approved Desgin All Complete As Per Drawing , Specification And Direction As Approved By The Architect / Engineer -In -Charge 1.8X2.5 In Running Meter 9.00 15 Boq Item 67 Door Curtain Providing & Supply Of Door Curtain As Per The Approved Design All Complete As Per Drawing , Specification And Direction As Approved By The Architect / Engineer -In - Charge

Refer document

Refer document

INR 1.86 Crore /-