Construction Of Sakav At Mhapral Mohalla To Lokarvan Road Tal Mandangad Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
Tender Value
23.85 Lakhs
Estimated cost
Bid Submission
24 Jun 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mandangad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sakav At Mhapral Mohalla To Lokarvan Road Tal Mandangad Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in hard murum and boulders including shoring and strutting,dewatering as necessary and disposing off excavated stuff as directed etc. complete. |
| 2 | Excavation for foundation in hard rock by controlled blasting including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. |
| 3 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 4 | Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with CM 1:1 proportion etc. complete |
| 5 | Providing and laying in situ / ready mix cement concrete of M-15 proportion with trap/ granite/ quartzite/ gneiss metal in foundationincluding necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 6 | Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/gneiss/crushed stone metal mechanically mixed placed in foundation and compacted by vibration including necessary bailing out water curing concrete batch mix plant/pan mixer with fine agreegates of requried specifications |
| 7 | Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite /quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners |
| 8 | Providing and laying in situ / ready mix controlled M-20 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement)With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 9 | Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/ granite/quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing inement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. |
| 10 | Providing and laying cement concrete wearing coat M30 grade with batch mix type / concretemixer with SCADA including reinforcement as per drawings and technical specifications etc.complete with fine agreegates of required specifications ( VSI sand finely washed etc |
| 11 | Providing cutting bending hooking tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc |
| 12 | Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc complete |
| 13 | Providing tar paper bearing including laying in proper position etc complete |
| 14 | Providing railing of mild steel angle post 2.0m center to center of section 75mm x 75mm x 10mm or equivalent I/C section of height 1.05 above bridge surface with minimum anchor length of 30cm including hold fast of 25mm diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30cm x 30cm x 30cm with three rows of 40mm B class GI pipe provided at 30cm on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etc. complete. |
| 15 | Providing and laying weep holes of 100mm diameter PVC pipes as per as drawing for abutment returns , returs walls etc.complete |
| 16 | Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) |
| 17 | Supplying and spreading 80m laterite stone metal for soling including conveying and stacking etc complete (50 meter lead hand broken form boulders excluding Royalty |
| 18 | Quality control tests of sand etc complete |
| 19 | crushing value/compressive strength water absorption and specific Gravity |
| 20 | Compressive strength of cc cube |
| 21 | Providing RCC design and drawings etc comp |
| 22 | Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figuresincluding painting the lefters/figures with approved colour and shade complete |
| 23 | GST |
AI Tender Summary
Tender Timeline
Jun 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender