Constructing Two Room School Building At Sakhari Tal Mandangad Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
Tender Value
15.69 Lakhs
Estimated cost
Bid Submission
24 Jun 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mandangad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Two Room School Building At Sakhari Tal Mandangad Dist Ratnagiri ( For Majoor Sahakari Sanstha Only )
BOQ
| Sl. No. | Item Description |
| 1 | Item No . 1 :- Excavationforfoundationinhardmurumandboulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, wateringand strutting etc. complete. (Lift upto 1.5m.) . |
| 2 | Item No. 2:-Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). |
| 3 | Item No.3:-Providing and laying in situ cement concrete of M- 10proportion withtrap/granite/quartzite/gneissmetalinfoundation including necessary form work, compacting and curing etc.complete. (with reversible drum rtype mixer with SCADA with Natural / VSI standard Artificial Sand). |
| 4 | Item No. 4 :- Providing laterite stone masonry in C. M. 1:6 in foundation & plinth including striking joints on the unexposed faces & watering complete. |
| 5 | Item No . 5:-Filling in plinth and floors with approved excavated material in15cm. to 20cm. layers including watering and compacting etc. complete. |
| 6 | Item No.6:-Filling in plinth and floors with contractors from outside and approved by Engineer incharge in layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 7 | Item No . 7 Providing soling using 80 mm size trap metal in 15 cm. layerincluding filling voids with Crushed sand/grit, ramming, wateringetc. complete. |
| 8 | Item No . 8 : - Providing and laying Cast insitu/Ready Mix cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directedincluding steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.). |
| 9 | Item No 9:-Providing Laterite stonemasonaryin cement mortar 1:6 in Superstructure and plinth including striking joints on the unexposd faces and wateringcomplete.( Laterite stone six sides cut and thickness of mortar joints shall be 12 mm max. ) ( including Royalty Charges ) |
| 10 | It3em No .10 : -Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. |
| 11 | Item No. 11:-Providing and fixing Country cut teak wood double or singleleaf second class fully panelled door shutter with 35mm thickstyle and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x100mm stainless steel fixtures and fastening and finishing thewood work with oil painting 3 coats. (Excluding the door frame) |
| 12 | Item No.12:-Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 13 | Item No.13 Providing and fixing in position. (as per I.S.1868 / 1982)Aluminium sliding window of two tracks with rectangular pipehaving overall dimension 63.50 x 38.10 x 1.02 mm at weight0.547 kg/Rmt. and window frame bottom track section 61.85 x31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side tracksection 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Theshutter should be of bearing bottom 40 x 18 x 1.25 mm at weight0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417kg/Rmt. As per detailed drawings and as directed by Engineerin charge with all necessary Aluminium sections fixtures andfastenings such as roller bearing in nylon casting and selflocking catch fitted in vertical section of shutter including 5 mmthickplain glasswith all requiredscrews and nuts etc,complete. With colour Anodising with box.Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Theshutter should be of bearing bottom 40 x 18 x 1.25 mm at weight0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417kg/Rmt. As per detailed drawings and as directed by Engineerin charge with all necessary Aluminium sections fixtures andfastenings such as roller bearing in nylon casting and selflocking catch fitted in vertical section of shutter including 5 mmthickplain glasswith all requiredscrews andnuts etc,complete. With colour Anodising without box.. |
| 14 | Item NO. 14: -Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint andtwo coats of oil painting complete. |
| 15 | Item No. 15 :- Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor basedPLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 16 | Item No.16-Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as perdetaileddesignanddrawingsincludingcentering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curingcomplete.(Excludingreinforcementandstructural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 17 | Item No.17:-Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. |
| 18 | Item No :-18Providing and fixing manglore tiles roofing with class AA tiles includinh securing last courseincluding battenes and required necessary fittings etc complete .Excluding ridge and hip tiles). |
| 19 | Item No.19:-Providing and fixing manglore tilesridge etc. comp. |
| 20 | Item No. 20:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 21 | Item No. 21 :--Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 with neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 22 | Item No. 22 :-Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curingetc.complete. |
| 23 | Item No. 23:Providing and laying vitrified mirror / glossy finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting |
| 24 | Item No 24 :-Providingandapplyingwashable oil-bounddistemperof approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 25 | Item No. 25-Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning andpreparingthesurface,wateringfortwodaysetc. complete. |
| 26 | Item No. 26:- Basic test of cement . Standred consistancy Fineness ,Specific Gravity ,Setting Time ( Initial& Final ), compressive Strngth , Soundness |
| 27 | Item No.27:-FineAGGREGATS Sive Analysis ) Silt & Clay Content |
| 28 | Item No.28:- Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 29 | Gst |
AI Tender Summary
Tender Timeline
Jun 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender