Military Engineer Services-MES has published Special Repair Of Sumps Pipe Lines Connecting Footpath And External Services Of High Lift Pump House At Leimakong Mil Stn. Submission Date for this Tender is 30-06-2022. Passenger Lift Tenders in leimakhong Manipur. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-06-2022 |
| Sl. No. | Item Description |
| 1 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good disturbed surface in hard/dense soil complete all as specified and as directed. |
| 2 | Excavation in trenches, n. exc 1.50m wide and n. exc 1.50m in depth, for foundation, pipe line etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and n. exc 1.50m in depth and getting out in soft / loose soil complete all as specified and as directed. |
| 3 | Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cmcomplete all as specified and directed. |
| 4 | Removing excavated materials not exc. 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and as directed. |
| 5 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. |
| 7 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed. |
| 8 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all as directed. |
| 9 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 10 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries from site of work complete all as directed. |
| 11 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbingdown with water etc. complete all as specified and as directed. |
| 12 | Dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work or masonry etc and making good disturbed ground complete all as specified and as directed. |
| 13 | Dismantling of fencing wire mesh any type complete all as specified and as directed. |
| 14 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 15 | Material and labourfor reinforced cement concrete M-30 (Design Mix) ( 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 16 | Material and labourfor reinforced cement concrete M-30 (Design Mix) ( 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 17 | Material and labourfor reinforced cement concrete M-30 (Design Mix) ( 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed. |
| 18 | Material and labour for 75mm thick, PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in sub base and finished the surface fair and even complete all as specified and as directed. |
| 19 | Supply only integral water proofing compound (WPC)completeall as specified and as directed. |
| 20 | Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in surface channel, drain and like etc completeall as specified and as directed. |
| 21 | Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement completeall as specified and as directed. |
| 22 | Material and labour for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in post hole complete all as specified and as directed. |
| 23 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 24 | Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in coping including necessary formwork completeall as specified and as directed. |
| 25 | Material and labour for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in bed blocks including weathering, slightly rounded or chamfered angles and throating including necessary formwork completeall as specified and as directed. |
| 26 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radiusbuilt in cement mortar (1:4)complete all as specified and as directed. |
| 27 | Materials and labour for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6)complete all as specified and as directed. |
| 28 | Extra over Granite or Trap stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm to face stones and of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and as directed. |
| 29 | Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 30 | Materials and labour for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) with rough finished flat surfaces of concrete complete all as specified and as directed. |
| 31 | Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed. |
| 32 | Material and labour for use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc., vertical or to batter with rough finished surfaces of concrete flat complete all as specified and as directed. |
| 33 | Restraining and resecuring including making good staples etc plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified and as directed. (NOTE: Each line wire to be measured ) |
| 34 | Supply only chain link MS galvanisd fencing, any size or type complete all as specified andas directed. |
| 35 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 36 | Supply and fixing of galvanised 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as in repair complete all as specified anddirected. (NOTE: Each line wire to be measured ) |
| 37 | Supply and fixing of mild steel works as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 38 | Material and labour for mild steel round bars 10mm dia cut to length, bent to shape required for fixing of chain link fencing of quality conforming to Fe-410 (Grade-E-165) all as specified complete all as specified and as directed. |
| 39 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 40 | Material and labour for mild steel TMT bars 5mm dia and over and upto and including 10mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 41 | Supply only mild steel screw bolts dia. of neck n. exc 12mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc.5cm and not exc. 12cm long complete all as specified and as directed. |
| 42 | Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, conforming to Fe 410-W (Gde E-250) quality-A complete all as specified and as directed. |
| 43 | Supply and fixing of stainless steel letter of size 12 inch height and 10 inch width in any position horizontaly/ vertically with necessary self tapping screw/ nut & bolt including supply and fixing over 1mm thick MS sheet complete all as specified and as directed. |
| 44 | Supply and fixing of 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. |
| 45 | Supply and fixing of 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. |
| 46 | Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like etc and fixed over and including 15mm thick cement plasterin cement mortar (1:4) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed. |
| 47 | Material and labour for precast Cement Concrete chequered tiles of size 300 x 300 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 20mm thick screed bedin CM (1:6) complete all as specified and as directed. |
| 48 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade and laid over and including 25mm thick sand cushioning complete all as specified and as directed. |
| 49 | Material and labour for joint free non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 50 | Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 350x250x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed. |
| 51 | Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar completeall as specified and as directed . |
| 52 | Material and labour for raised pointing in cement mortar (1:4)to random or polygonal rubble, uncoursed or brought upto courses completeall as specified and as directed . |
| 53 | Materials and labourfor 15 mm thick rendering on other than fair faces of brick work surface in cement mortar (1:4)with using water proofing coumpound andfinished the surfaceseven and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under respective items. |
| 54 | Materials and labourfor 15 mm thick renderingon fair faces of brick work or concrete surface in cement mortar (1:4)with using water proofing coumpound andfinished the surfaceseven and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under respective items. |
| 55 | Materials and labourfor 5 mm thick renderingon ceiling/chajja concrete surface in cement mortar (1:3)with using water proofing coumpound andfinished the surfaceseven and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under respective items. |
| 56 | Materials and labour for 15 mm thick rendering on fair faces brick work or concrete surface in cement mortar (1:4) andfinished the surfaceseven and smooth without using extra cementcomplete all as specified and as directed. |
| 57 | Material and labour for applying two coats of cement base paint over a coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete all as specified and as directed. |
| 58 | Material and labour for preparation of old steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamal paint complete all as specified and as directed. |
| 59 | Material and labour for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 60 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 61 | Material and labour for preparation of new steel surfaces of any description n. exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 62 | Taking up 200 mm bore cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed |
| 63 | .-Ditto all as per item no 62.00 above but of size 150mm bore and ditto-. |
| 64 | .-Ditto all as per item no 62.00 above but of size 100mm bore and ditto-. |
| 65 | .-Ditto all as per item no 62.00 above but of size 80mm bore and ditto-. |
| 66 | Supply, laying and jointing of 200mm bore ductile iron pipes with spigot and socket ends suitable for push on rubber joint centrifugally cast, class (K-9) confirming to IS 8329 : 2000 , inner side cement lining and outer side black bitumen coating and any lengthand including push on rubber (EPDM) ring with ISI marked complete all as specified and directed. |
| 67 | .-Ditto all as per item no 66.00 above but of size 150mm bore and ditto-. |
| 68 | .-Ditto all as per item no 66.00 above but of size 100mm bore and ditto-. |
| 69 | .-Ditto all as per item no 66.00 above but of size 80mm bore and ditto-. |
| 70 | Supply and fixing 300mm bore ductile iron sluice valve with SS spindle, iron wheel head, both end flanged, ISI marked, Class PN 1.6, confirming to IS 14846 : 2000 with MS bolts, nuts and washers and a pair of rubbergasket joints including cleaning of valve pit and testing after and including taking down of existing unserviceable sluice valve complete all as specified and as directed. |
| 71 | .-Ditto all as per item no 70.00 above but of size 200mm bore and ditto-. |
| 72 | .-Ditto all as per item no 70.00 above but of size 150mm bore and ditto-. |
| 73 | .-Ditto all as per item no 70.00 above but of size 100mm bore and ditto-. |
| 74 | .-Ditto all as per item no 70.00 above but of size 80mm bore and ditto-. |
| 75 | Supply and fixing of 200mm bore ductile iron Non Return Valve, Swing type, both end flanged with SS spindle, ISI marked, PN 1.0, confirming to IS 5312 : 1984 Part-I,gasket joints, nuts and bolts includingtesting after and including taking down of existing unserviceable Non Return Valve complete all as specified and as directed. |
| 76 | Supply and fixing of DI special fittings such as bends (any radius and angle) tapers any type( straight, bend, increasing, decreasing or double socked etc.) Tee pieces single branches, Y junction, double branch, cross ( all socketed or socket and spigot) collars, caps & plugs for spigot, socketed or flanged suitable for upto 300mm bore DI pipes confirning to IS 9523 : 2000 complete all as specified and directed. |
| 77 | Material and labour for cutting ductile iron pipes and reducing to required length in position for insertion of new tees, branches, etc.for 200mm bore pipe complete all as specified and as directed. |
| 78 | .-Ditto all as per item no 77.00 above but of size 150mm bore and ditto-. |
| 79 | .-Ditto all as per item no 77.00 above but of size 100mm bore and ditto-. |
| 80 | .-Ditto all as per item no 77.00 above but of size 80mm bore and ditto-. |
| 81 | Taking up or down 50mm bore steel tubing and connections complete all as specified and directed |
| 82 | Supply and fixing of 50mm bore galvanised steel water tubing medium grade including all fittings laid in trenches complete all as specified and as direcetd. |
| 83 | Supply and fixing of 50mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends and including taking down of existing unserviceable gate valve complete all as specified and as directed. |
| 84 | Material and labour for construction of brick masonry built in CM(1:6) valve pit of internal dimension 1200mm x 1200mm x 1200mm including necessary earth work complete, 15mm thick plaster in CM(1:6) internally and 15cm below GL externally with mild steel angle iron frame work of size 50x50x6mm and 3mm thick mild steel sheet cover, openable through hinges of suitable size, handle and necessary locking arrangements and painting to steel surfaces with two coats of synthetic enamel paint (1st grade quality) over a coat of red oxidezinc chrome primer after preparation of new surfaces including demolition of existing unserviceable valve pit complete all as shown on drawing of CESZ No: TD/EM/06 and asdirected. |
| 85 | .-Ditto all as per item no 84.00 above but of size 900mm x 900mm x 900mm and ditto-. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
