Construction Of Staff Quarter-5 Under Champua Nac
Tender Value
16.76 Lakhs
Estimated cost
Bid Submission
18 Jun 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
champua → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Staff Quarter-5 Under Champua Nac
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation in hard soil within 50mtr initial lead, 1.5m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge. |
| 2 | Fiilling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge. |
| 3 | C.C.(1:3:6) with 40mm HBHG metal including cost,carriage and royalty of materials . |
| 4 | Supplying all labour,materials & T&P for Brick masonary with Flyash bricks in Superstructurehaving C.S not less than 75 kg/Cm2 in Cement Mortar(1:6) including watering and curing etc complete as per direction of Engineer-in-charge. Foundation & Plinth |
| 5 | Superstructure |
| 6 | R.C.C work of M-20 grade with 20mm and down grade C.B chipsincluding hoisting & laying including cost,carriage and royalty , tax of materials |
| 7 | Supplying all labour,materials & T&P for MS reinforcement for R.C.C works including straightening, cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and including cost of M.S rod. |
| 8 | Rigid & smooth centering & shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor. Beam |
| 9 | Lintel,Chajja |
| 10 | Wall Beam,Roof Slab |
| 11 | Supplying all labour,materials & T&P for 12 mm thick cement plaster in Cement Mortar (1:6) over brick work including curing,cost,conveyance and royalty of the materials etc complete as per direction by the Engineer-in-charge. |
| 12 | 16mm thick cement plaster in CM(1:6) over brick work with cement punning for skirting incl.all Cost complete |
| 13 | 6mm thick cement plaster in CM(1:4) over R.C.C surfacefinished smooth with deep chipping & slury treatment complit. (Unit-1 sqm) |
| 14 | Fixing Vetrified Floor tiels in floors tread or staps landing on 25mm thick bed of c.m (1;1) jointed with neat cement slury mixed with pigment match the shades including rubbing & polishing complitincluding cost of tiles for 10 sqm |
| 15 | Fixing Vitrifiedtiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete of item of work as per the direction of Engineer – in Charge. |
| 16 | Supplying and fitting and fixing of Iron Door & window for window with chowkath and window grill including fittng of tower bolt ,handle,hinges etc complete including cost of chowkat angles,flats ,G.I sheet etc complete as per marketrate |
| 17 | Supplying and fitting and fixing of PVC Doorincluding fittng of tower bolt ,handle,hinges etc complete including cost of chowkat, complete as per marketrate |
| 18 | Priming one coat with any approved primer in Iron work including cost of paint, materials, Labour T & P etc. complete as per direction of Engineer incharage..( Item No-1 & page No-93 ) (Data for 9.30 sqm) |
| 19 | Iron Work painting two coats with plastic emultion paint of approved shade in new work to give an even shade including cost of paint etc. complete as per direction of Engineer incharage.Item-20, Page-99 (Data for 10Sqm. ) |
| 20 | Providing and fixing of Sliding windows of approved make to be fabricated from roll formed section made of pre painted steel ( Base Steel as per IS513 of 0.6 mm thick \"D\" quality, galvanized as per IS-277 with Zinc of 120 Gm / Sq.mtr) with total coated thickness of 0.55 mm slide guide section should be made of 0.5 mm stainless steel of 430 grade. withpaint specification being with primer of 5-7 micron thick and finished paint with polyster paint of 12-16 microns alongwith the alkyd backer at the back of 5-7 micron and the Sections for external frame bottom and top should be of 79 X 45 mm external frame sides should be of 69 X 24mm, Guide for top and bottom should be of 69 X 26 mm ( Stainless Steel) . Section for shutter should be of 26 X 30mm, Sash bar should be of 23 X 57mm. Accessories / gaskets are to be used as per the manufactures supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets for internal and external are to be made of glass filled nylon. The Section are to be Cut to length, joined and assembled by means of corner bracket and frames are fixed to the concrete ? masonry wall by means of self expanding screws and glass to be used of 5mm reflective with all taxes complete. (A/R , Page No-245 & Item No-12) |
| 21 | White washing one coat with Shell lime on new plaster surface include-ing cost of material , Labour, T & Petc. complete as per direction of Engineer incharage ( Item No-30, page No-110 ). Data for 93 Sqm, |
| 22 | Distempering 2 coats to walls with distemper of approved shade on NEW work to give an even shade including cost of labour & distemper etc. (Unit-1 sqm) |
| 23 | Supplying Fitting & Fixing of Stainless steel of 304 grade in Hand railing using 50mm dia of 2mm thick Circular pipe with Balustrade of size 32mm x 32mm x 2mm@ 0.90 mtr, c/cand Stainless square pipe brace of size 32mm x 32mm x 2mm in 3 rows in Stair case as per apporoved design and specification. (Data for 3.26 Rmt.) |
| 24 | Electrification Work |
| 25 | Sanitary Fittings |
AI Tender Summary
Tender Timeline
Jun 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender