Construction Of Four Storeyed Rehabilitation Building New Block - D Under Hit Scheme-Ii, Dumurjola, Howrah., Howrah-West Bengal

TDR : 32564567

Tender Notice
BOQ

Expired

Howrah , West Bengal

Tender Brief : Construction Of Four Storeyed Rehabilitation Building New Block - D Under Hit Scheme-Ii, Dumurjola, Howrah.

Document Fees
Refer document

EMD
₹ 597400.0 /-

Tender Value
₹ 2.98 Crore /-

Submission Date
28-06-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof
2	Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.Upto 150 mm. thick
3	Earthwork in excavation of foundation trenches or drains etc. in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or satcking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom bailing out water etc.as required complete.Depth of excavation not exceeding 1500 mm.
4	Earth work in filling in foundation trenches,plinth ,compound,tank,low land, ditches etc with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. ( Payment to be maid on the basis of measurement of finished quantity of work.) With earth obtained from excavation of foundation.
5	Anti termite treatment to back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (160 ml in 75 litres) with water by weight at the rate of 7.5 Litres per sq.m. of vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 7.3.1 of code IS-6313 (part-II) 2013. (Mode of measurement will be per sq.m. of vertical area of foundation treated).
6	Anti termite treatment to the top surface of the consolidated earth,sand etc within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (105ml in 50 litres) with water by weight at the rate of 5 Litres per sq.m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centrer both ways shall be made with 12 mm. diameter mild steel rod on the surface to facilitate saturation of the soil with chemical emulsion. The work shall be carried out as per specification described in para 7.2.3 of code IS-6313 (part-II) 2013.(Mode of measurement will be per sq.m. of plan area of plinth treated).
7	Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
8	Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
9	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety
10	Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety
11	Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item .[cement to be supplied by the Manufacturer/ supplier]In Ground Floor and Foundation. (i) Without approved concrete pump
12	Supplying ready mixed concrete of M 20 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item.[Cement to be supplied by the Manufacturer or supplier] (i)Without approved concrete pump.In Ground Floor and Foundation
13	first floor
14	Second Floor
15	Third Floor
16	4th Floor(Mumpy room)
17	Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation (i) Upto roof ofGround Floor.
18	(b) Steel shuttering or 9 to 12 mm. thick approved quality ply board shuttering.
19	Upto roof of1st. Floor.
20	Upto roof of2nd. Floor.
21	Upto roof of 3rd. Floor.
22	Upto roof of 4th. Floor.(mumty room)
23	Reinforcement for reinforcement concrete work in all sorts of structures including distribution bars, stirrups, binders, etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and bending with 16 guage black annealed wire at every intersection, complete as per drawing and direction.Tor steel / Mild steel. JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEELIn foundation, basement and upto roof of ground floor/upto4 M.
24	For works of Ist floor Upto roof
25	For works of 2nd floor Upto roof
26	For works of 3rd floor Upto roof
27	For works of 4th floor Upto roof
28	Brickwork with 1st. class bricks in cement mortar (1:4)(a) In foundation and plinth
29	Brickwork with 1st. class bricks in cement mortar (1:4) (a) In superstructure ground floor
30	In Superstructure,1st. floor.
31	In Superstructure,2nd. floor.
32	In Superstructure,3rd. floor.
33	In Superstructure,4th. floor.
34	125 mm thick brickwork with 1st class bricks in cement mortar (4:1)(a) In ground floor
35	In1st. floor.
36	In2nd. floor.
37	In3rd. floor.
38	In4th. floor.(parapet wall)
39	(b)75 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:3) in ground floor including H.B. netting in every alternate layers. (a) In ground floor
40	In1st. floor.
41	In2nd. floor.
42	In3rd. floor.
43	Labour for chipping of concrete surface before taking up plastering work.
44	Plaster (to wall, floor, ceiling, etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosingand drip course, scaffolding /staging where necessary. (Excluding cost of chipping over concrete surface.) (A) With 1:4 cement mortar.(i) 20 mm. thick plaster(External). (a) In Ground floor.
45	(b) In1st. floor.
46	(c) In2nd. floor.
47	(b) In 3rd. floor.
48	(c) In 4th. floor.(mumpty room)
49	(i) 15 mm. thick plaster(Internal). (a) In Ground floor.
50	(b) In1st. floor.
51	(c) In2nd. floor.
52	(b) In 3rd. floor.
53	(c) In 4th. floor.(mumpty room)
54	(i) 10 mm. thick plaster. (a) In Ground floor.
55	(b) In1st. floor.
56	(c) In2nd. floor.
57	(b) In 3rd. floor.
58	(c) In 4th. floor.(mumpty room)
59	Extra for Rusticated plaster (over rate of corresponding item of plaster) With sand plus cement (Cement 0.053 Cu.m/100Sq.m)
60	Neat cement punning about 1.5mm thick in wall, dado, window sills, floor, drain etc.
61	Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency].(b) With Chawk Dungri(ii)Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m.
62	1st floor
63	2nd floor
64	3rd floor
65	Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm.thick in dado / wall in 15 mm thick [avg] cement mortar (1:2)including making suitable arrangements to hold the stonesproperly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency](b) With Chawk Dungri(ii)Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m.
66	1st floor
67	2nd floor
68	3rd floor
69	25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency]
70	Supplying and laying Polythene Sheet (150gm / sq.m.) overdamp proof course or below flooring or roof terracing or infoundation or in foundation trenches.
71	Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and applicationof cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement(iii)35 mm. thick
72	1st floor
73	2nd floor
74	3rd floor
75	Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. b) Slab Thickness above 25 mm and upto 37.5 mm
76	1st floor
77	2nd floor
78	3rd floor
79	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative
80	1st floor
81	2nd floor
82	3rd floor
83	Supplying and laying true to line and level 20mm./ 25mm thick precast roof tiles made of cement concrete with stone chips as per approved strength and density set in 25 mm avg. thick cement mortar (1:3) and filling joint (3mm wide) with cement sand mortar(1:1) applying cement slurry @ 1.75 kg. per sqm back of tiles and then setting close the precast tiles, finishing up the joints with slurry already laid and finally finishing the top surface in cluding providing 150mm high skirting with the same tiles flushed with the inside surface of parapet wall, finishing the mouth of rain water pipes, curving etc.as necessary complete as per direction of the Engineer-In-Charge.(a) For 25mm thick precast tiles (cement 14.6 kg. per sqm underlayer). (i)Above roof . floor
84	M.S. or W.I. Ornamental grill of approved design, joints continuously welded with M.S., W.I. flats and bars for windows railings, etc. fitted and fixed with necessary screws and lugs.(a) Grill weighing above 10 kg per sqM and upto 16 Kg / Sqm.(a) In Ground floor.
85	(b) In1st. floor.
86	(b) In2nd. floor.
87	(b) In3rd. floor.
88	M.S. or W.I. Ornamental grill of approved design, joints continuously welded with M.S., W.I. flats and bars for windows railings, etc. fitted and fixed with necessary screws and lugs. ii) Grill weighing above 16 Kg./sq.mtr and above In Ground floor.
89	(b) In1st. floor.
90	(b) In2nd. floor.
91	(b) In3rd. floor.
92	(b) In 4th. floor.
93	Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.ii) 4mm thick coloured / tinted / smoke glass.
94	Collapsible gate with 40 mm x 40 mm x 6 mm tee as top and bottom guide rail 20 mm x 10 mm x 2 mm vertical channels 100 mm apart in fully streched position 20 mm x 5 mm M.S. flats as Collapsible bracings properly rivetted and washered including 38 mm steel rollers including locking arrangements fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floor etc. and making good damages complete.(a) In Ground floor.
95	(b) In4th floor.
96	Wood work in door and window frame fitted and fixed in posion complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete Iron Butt Hinges and M.S. clamps.(the quantem should be corrected upto three decimals).e) Sal : MalayasianGround floor.
97	(b) In1st. floor.
98	(b) In2nd. floor.
99	(b) In3rd. floor.
100	Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:(a)35mm thick shutters (single leaf)
101	Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will bemade)(i) 50mm thick shutters with 25mm thick panel of size 30 to 45 cm(b) Ordinary teak wood.
102	Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge.(b) Pre-laminated Colour.
103	Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge.Factory made Single piece extruded PVC profiles door shutter of both side laminated wood grains decorative Finish:
104	Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.
105	Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing filmFor 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.
106	Louvered window. i) Top, bottom and side member.
107	ii) Louvered Section.
108	iii) Cleat angle ( Non-annodized).
109	Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(b) 40mm X 6mm, 200mm Length
110	Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark .(vii) 100mm. X 58mm. X 1.90mm.
111	Anodised Aluminium aldrop/sliding bolt of approved quality manufactured from extruded section conforming to IS specification(IS-2681/66) fitted and fixed complete.300mm x 16mm dia bolt
112	Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 150mm long x 10mm dia. bolt
113	Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 225mm long x 10mm dia. bolt.
114	Iron door ring of approved quality fitted and fixedwith nut and washers complete.50mm dia
115	Anodised alluminium grip handle with base plate of approved quality fitted and fixed complete. 165mm grip x 12mm dia rod x 42mm plate x3.2mm thick
116	Door stopper (Anodised alluminium)
117	Supplying fitting and fixing 125 mm long wooden buffer block. (i) with sal : Malayasian
118	Metallic magic eye of approved quality fitted and fixed complete
119	Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately.
120	Applying interior grade acrylic primer of approved quality and brand on plastered or concrete or similer surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and prepairing the surface thoroughly, complete as per manufacturer\"s specification and as per direction of the EICi) Water based interior grade Acrylic Primer.(a) Two Coats
121	Applying Acrylic Emulsion paintof approved quality and brand on interior walls and ceiling etc. including sand papering in intermediate coats including putty as per manufacturer\"s specification and as per direction of Engineer-in-charge.Two Coats. Luxury Quality. In All floors
122	Applying exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.(a) Two Coats.(a) In Ground floor.
123	(b) In1st. floor.
124	(c) In2nd. floor.
125	(b) In3rd. floor.
126	(c) In4th. floor.
127	Protective and decorative acrylic exterior emulsion paint of approved quality and brand, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required . The rate includes cost of material,labour, scaffolding and all incidental chages but excluding the cost of primer.Two coat. Super Protective 100% Acrylic Emulsion.(a) In Ground floor.
128	(b) In1st. floor.
129	(c) In2nd. floor.
130	(b) In3rd. floor.
131	(c) In4th. floor.
132	Priming one coat on steel surface or other metal surface with synthetic oil bound primer of apprived quality and brand including smoothening surfaces by sand papering, etc.
133	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc.including using of approved putty etc.on the surface, if necessary.(a) On steel or other surface . Withsupergloss(hi- gloss). (i) Two coats (with any shade except white)
134	Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
135	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface :(iii) One coat (with any shade except white)
136	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound in conformity with the Municipal /Corporation Rules for such disposal, loading into truck,unloading from truck and cleaning the site in all respect as per direction of Engineer in charge.
137	60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.)ii) Coloured Decorative
138	Galvanised Iron pipe outlet for water with bevelled end at outlet, supplied fitted and fixed complete including painting two coats to the exposed portion. (b) 32 mm. Dia.
139	Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)(i) In Roof:- b) With 0.63 mm thick sheet
140	Galvanised iron sheets valley gutter with perimeter not lessthan 750 mm with 225 mm lap each way fitted and fixed with necessary bolts, nuts, screws, etc.complete. Valley guttermade of 0.63 mm. thick sheets. (300mm End lapping)
141	Supplying fitting and fixing on wall a white Marble Plaque of size 900mm x 750mm x 18mm with engraved letters…
142	SANITARY & PLUMBING WORKS:Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings,S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming,dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. (iii) For 30 users A) With Pakur variety.(SAIL/TATA/RINL)
143	(iii) For 50 users
144	Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.i) With Pakur variety. (SAIL/TATA/RINL)
145	supplying ,fitting & fixing UPVC pipes A-type and fittings conforming to IS: 13592-1992 with all necessary clamps, nails including making holes in walls,floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including jointing with jointing materials ( Span yarn, Valamoid/Bitumen/M-seal etc.) complete.(ii)110 mm. dia.UPVC Pipes
146	plain Tee (ii)110 mm. Dia.
147	Plain Y (ii) 110 mm. Dia.
148	Bend 87.5 degree (ii) 110 mm. Dia.
149	Shoe (ii) 110 mm. Dia.
150	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length(b) 110 mm
151	(iii) Single Socketed 1.8 Meter Length (b) 110 mm
152	(iv) Double Socketed 1.8 Meter Length (b) 110 mm
153	(vi) Double Socketed 0.9 Meter Length(b) 110 mm
154	(vii) Double Socketed 0.6 Meter Length (b) 110 mm
155	Fitting(i) coupler (b) 110 mm
156	(iii) Door Tee (b) 110 mm
157	(iv) Door Tee(LH) & (RH) (b) 110 mm
158	(v) PlainY (b) 110 mm
159	(vi) Door Y (LH) & (RH) (b) 110 mm
160	(x) bend 87.5º (b) 110 mm
161	(xii) Door Bend(LH) & (RH) (b) 110 mm
162	(xv) vent cowl (b) 110 mm
163	(xvi) pipe clip (b) 110 mm
164	Supplying, fitting andfixing E.W.C. in whiteglazed vitreouschinaware of approved make complete in position with necessary bolts, nuts etc.(a) With \"P\" trap
165	Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(iv) Bestolite (solid type) white
166	Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
167	Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.ii) 550 mm X 400 mm size
168	Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(i) 530 mm X 430 mm x 180 mm
169	Supplying, fitting and fixing soap holder.(a) Fibre glass
170	Supplying, fitting and fixing towel rail with two brackets.(a)C.P. over brass 25 mm dia. and 600 mm long
171	Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
172	Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, pecials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed Work 40 mm dia. medium quality
173	Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)For Exposed Work40 mm dia
174	25mm dia
175	15mm dia
176	Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model -Tropical / Sumthing Special of ESSCO or similar brand).
177	Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
178	Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
179	Supplying, fitting and fixing pillar cock of approved make.a) (ii) CP Pillar Cock Super Deluxe with Aerator - 15 mm. (Equivalent to Code No. 508 & Model No. Tropical / Sumthing Special of ESSCO or similar brand).
180	Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
181	Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. 25 mm
182	Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings.Dia 40 mmm
183	Supplying,fitting and fixing brass ferrule including connection with G.I. pipes of TATA make of following dia. and upto 450 mm long with screw,jamnut,sockets etc.,complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer - in - Charge. 25 mm dia
184	Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps. 1050 mm long
185	900 mm long
186	Supplying,fitting and fixing approved brand P.V.C. CONNECTOR whiteflexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia (iv) 750 mm long.
187	Supplying, fitting and fixing C.P. Extension Pipe
188	Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 2000 litre capacity
189	Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity.
190	Labour for punching hole in plastic water storage tank upto 50 mm dia.
191	ELECTRICAL WORKS:Supplying and fixing 32A DP MCB as incommer for main service including S&F. of MCB SS enclosure with IP-20/30protection, powder coated provision for two poleMCB, on wall after cutting the wall &provision for earthing attachment. 2 way (Make: Havells / approved make).
192	Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthingattachment. 2 + 4 way (Make: Havells / approved make).
193	Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.. 32/40 AMake: Havells / approved make).
194	Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection - 6-10 A SP as outgoing.(Make: Havells / approved make).
195	Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction).25 mm dia 3 mm thick Polythene Pipe.
196	Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.
197	Supply and fixing Two way Circular Box & cover
198	Supply and delivery at site 3 core 6 sqmm un-armoured aluminium XLPE cable (HAVELL\"S/ Gemscab) for inter connection from energy meterto SPN DB.
199	Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core
200	Laying of cable as below, after cuttingfloor / pavement/ wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/ pavement/wall etc.
201	Supplying & fixing medium gauge GI Pipe ( ISI-Medium)Protection with necessary fittings and jointing metarials as required. (a)50 mm dia
202	(b) 100 mm dia
203	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl.mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC. Average run 6 mtr.
204	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC. (a) On Board
205	(b)Average run 3 mtr.
206	Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing- capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works.[PVC casing-capping and Switch board both on surface] Avarage run 6 Mtr.
207	Supply & Fixing 240 V, 6A plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150 x 100 x 5mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.
208	Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150 x100 x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
209	Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switchboard with bakelite/perspex top cover by screw aftermaking housing for regulator knob by cuttingbakelite/perspex top cover incl. making necy. connectionsetc
210	Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works(a)100 mm x 100 mm x 65 mm
211	(b)200 mm x 150 mm x 65 mm
212	Supply & Fixing of TV Socket
213	Supplying and Drawing 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 22/0.3 (1.5 sqmm)
214	Supplying and Drawing 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
215	Supply and delivery at site 2 core 6 sqmm un-armoured aluminium XLPE cable (HAVELL\"S/ Gemscab) for outdoor light.
216	Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip)Wire, making holes etc. as necy. mending good damages and painting
217	Distribution wiring in 1.1 KV single core stranded \"FR\"PVC insulated & unsheathed copper wire (Brandapproved by EIC) in 20mm size PVC rigid conduit \"FR\"(Precision make) incl. necy. fittings as required. 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC
218	Supplying and fixing PVC Rigid Conduit \"FR\" [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.20 mm size
219	Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :(a)2 core 6 sq.mm.
220	(b)3 core 6 sq.mm.
221	Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : (a) 2 core 6 sq.mm.
222	(b) 4 core 6 sq.mm.
223	Supply & delivery of 20W LED Ultima Line batten Tube light fitting, Make:- Magik/ HPL / approved make
224	Supply and delivery of 8W LED bulkhed light.Make:- Magik/ HPL / approved make
225	Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.
226	Cutting channel of 40 mm x 40 mm size on masonry wall incl.S&F heavy gauge polythene pipe dia as stated below, bymeans of iron hooks and supplying and drawing 18 SWG GIWire as fish wire incl. mending good damages to buildingworks(a) 19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
227	Supply & delivery of 30 Wattoutdoor type Solis Plus Street light fittings with suitable bracket, working at single phase supply, 50Hz, LED type.(Make:- Magik / HPL / Approve make)
228	Fixing outdoor type fluorescent/SV/MV light fitting on wall including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting
229	Supply, delivery, installation, testing & commissioning of water lifting Centrifugal Monobloc pump having capacitysingle phase ,rated 2 HP.Make:- Havell\"s / Approved make
230	Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.
231	Design & Drawing of Electrical System, Layout & PeriodicalSupervision of Total Electrical Work.
232	Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below (a) By ISI-Medium GI pipe
233	Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar omplete with GI bolts, nuts, washers, spacing insulators etc. as required
234	Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire (a)No. 4 SWG
235	(b)No. 10 SWG
236	Supplying & fixing sheet metal (16 SWG) Iron CladBusbar chambers on angle iron frame on wall, incl.earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991)4 bars, 415 V, 63 A
237	GST @ 12% From item no- 01 to 127
238	WB CESS @ 1% From item no- 01 to 128

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Four Storeyed Rehabilitation Building New Block - D Under Hit Scheme-Ii, Dumurjola, Howrah., Howrah-West Bengal

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Four Storeyed Rehabilitation Building New Block - D Under Hit Scheme-Ii, Dumurjola, Howrah., Howrah-West Bengal

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us