Military Engineer Services-MES has published Provn Of Single Living Accn For 10 X Or Alongwith Bathroom And Provn Of Single Living Accn For 10 X Or Alongwith Bathroom And Toilet For Ifsu, Provn Of 40 X Geysers Against Defi And Provn Of 2 X Package Type Water Filter Plant For Klp Pump House At Leimak. Submission Date for this Tender is 21-06-2022. Water Filters Tenders in leimakhong Manipur. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-06-2022 |
| Sl. No. | Item Description |
| 1 | B/R work |
| 2 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Excavation over areas not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed. |
| 6 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 7 | M & L for PCC M-10 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed. |
| 8 | M&L for cement concrete M-15 grade(Nominal Mix) type B1 using 20mm graded crushed stone aggregate as in copping complete all as specified and directed. |
| 9 | M & L for RCC M-25 nominal mix using 20mm graded crushed stone aggregate in foundations, including rafts, footings, foundationbeams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed pilesand mass concrete vcomplete all as specified and directed. |
| 10 | M&L for RCC M-15 (nominal mix) using 20 mm graded crushed stone aggregate as in beams, lintels and the like over 1.5m span complete all as specified and directed. |
| 11 | M & L for PCC M-10 grade (Nominal mix) using 20mm graded crushed stone aggregate as in hold fast complete all as specified and as directed. |
| 12 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 13 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 14 | S&F Steel work in tubular trusses including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and as directed. |
| 15 | Material and labour for CI specials such as Tees of any size and radious, collars, tapers, tail pieces, caps and plugs upto 150 mm bore complete all as specified and directed. |
| 16 | S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A .complete all as specified and as directed |
| 17 | M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. complete all as specified and directed. |
| 18 | Ditto as per items No 17but 5mm and over upto & incl 10mm dia in stirrups, spaces and binders.complete all as specified and directed. |
| 19 | M&L for MS work as inhold fasts; and similar small articles conforming to Fe-290 Gde-E 165. complete all as specified and directed. |
| 20 | M & Lforrendering15 mm thickin CM1:6 on fair surfaces of brick work or concrete surfaces finishedevenand smooth completeall asspecified |
| 21 | M & Lforrendering15 mm thickin CM1:4 on fair surfaces of brick work or concrete surfaces finishedevenand smooth completeall asspecified |
| 22 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. |
| 23 | M&L forpreparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 24 | M&L forprepraration of new or previously untreated surfaces of steel and applying one coat of redoxide.complete all as specified and directed |
| 25 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of exterior emulsion paint white or tinted over and including a coat ofwall care puttyon plastered surfaces complete all as specified and directed. |
| 26 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of wall putty. complete all as specified and directed. |
| 27 | M&L for Prepration of new plastered surfaces of walls and applying three coats of white wash.complete all as specified and directed. |
| 28 | M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed |
| 29 | M&L for 100mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. |
| 30 | M&L for Hardcore of broken stone or boulder ofgauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 31 | M&L 25mm thick cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregateasin floor, finishes even and fair to receive floor tiles complete all as specified and directed. |
| 32 | M&L colourednon-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, setand jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6complete all as specified and directed. |
| 33 | M&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirtingetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10 mm thick on fair faces of brick work in CM (1:3) for receving vertical dado tiling complete all as specified and directed. |
| 34 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 35 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 36 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 20mm thick sreed bed in CM 1:6 complete all as specified and directed. |
| 37 | M&L 20mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed. |
| 38 | M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 39 | M&L 75mm thick PCC M 10 grade (nominal mix) using 40mm graded crushed stone aggregate as in sub base finishing surfaces even and rough complete all as specified and directed. |
| 40 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade "A" complete all as specified and directed |
| 41 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed |
| 42 | M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mmand fixed with 30mm laps complete all as specified and directed |
| 43 | M&L2nd class hard wood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete as directed. |
| 44 | S&F 30 mm thickflush shutters, solid core construction, with particleboard core and plywood face pannels,commercial type on both sides complete all as specified and directed. |
| 45 | S&F 2nd Class H.W Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b). complete all as specified and directed. |
| 46 | Supply and fixed 2nd class HW small fittings such as brackets of any type, latch and hing block, saved door and window stops and the like including all necessary labours articles n exc 200 cu cm each.complete all as specified and directed. |
| 47 | Providing and fixing factory made uPVC white colour Three track sliding 88x52mm, (2/4 shutter) glass and wire mesh shutter windows, made of reinforcement frame 60mm x 22 mm, sliding glass window sash 78 mm x 60 mm, reinforcement sash 30 mm x 18 mm, sliding mesh sash 78 mm x 50 mm, reinforcement mesh sash 26 mm x 10 mm, sliding interlock for window and sliding glazing bead 24.5 mm x 16 mm, one panel (position as directed by Engr in Charge) will be fixed and divided in two portion fixed with 4 mm thick plain clear glass, mitered cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 (±) 0.2 mm thick, galvanised steel frame (28 mm x 21.5 mm), T profile (27 mmx 17 mm) to be inserted in required profile. Frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware Handle to slide shutter, sliding locking system and 4 mm thick glazing with slected quality glass and stainless steel wire mesh of gauge 0.56 nominal dia of wire and average width of aperature 1.18 mm, complete to fix in all respect, area of each window exc 2.0 Sqm. |
| 48 | Note :- The window shall be divided vertically in two part, two third of the window shall be sliding window in three track sliding channel and remaining one third part shall be divided in two part horizontally, the upper one panel shall be with 4 mm thick fixed plain clear glass and lower panel with one openable shutter fixed with 4 mm thick plain clear glass including aluminium anodized grill of design DG 104 pattern, madeout of 10mm dia rod fixed with and including standard aluminium of F section of size 23.40mm x 15.30mm and 1.4 mm thick complete all as specified. Make:-M/S Accu Polytech Pvt Ltd(ACCUCEL),M/S Profine india window technology Pvt Ltd (Brand-KOEMMERRLING),M/S Rajshriplastiwood,M/S NCL Veka Ltd) |
| 49 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Boardincluding fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. |
| 50 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified. |
| 51 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares in n. exc. 0.5 sq.m in each pane. complete all as specified and directed. |
| 52 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples. complete all as specified and directed. |
| 53 | S&F floor door stopper of aluminium alloybody and tongue with hard drawn steel springwith 140mm overall length of cover plate.complete all as specified and directed. |
| 54 | S&F mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller platecomplete all as specified and directed. |
| 55 | S&F butt hinges medium weight cold rolled mild steel 100mm. complete all as specified and directed. |
| 56 | S&F 200mm aluminium anodised of extruded section barrel tower bolts. complete all as specified and directed. |
| 57 | S&F 150mm aluminium anodised of extruded section barrel tower bolts. complete all as specified and directed. |
| 58 | S&F 150mm long alumiunium handles cast type anodised. complete all as specified and directed. |
| 59 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 60 | S&F 75 mm but hinges medium weight cold rolled mild steel. complete all as specified and directed. |
| 61 | S & F Pre painted galvalume aluminium zinc coating GI Based semi corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 62 | S & F Pre painted galvalume aluminium zinc coating GI Based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 63 | S & F vitreous China wash basin, white, flat back, size 630x450mm including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed. |
| 64 | S&F600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 65 | S&Fin repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washerscomplete all as specified and directed. |
| 66 | S&F in repairs vitreous china squatting pan “Orissa pattern of size (580x440)mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed. |
| 67 | S&F PVC connection of 15mm size with PTMT nuts of length 600 mm. complete all as specified and directed. |
| 68 | M&L PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia of outlet.complete all as specified and directed. |
| 69 | S&F pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia ofpipe and fixed complete all as specified and directed. |
| 70 | S & Fbore bib taps(ISI marked) , cast copper alloy, chromium plated fancy type , screwed down, screwed for iron pipe for 15 mm bore or for brass ferule complete all as specified and directed. |
| 71 | S&F angle cocks, cast copper alloy, chromium plated with long shank and cup , high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia. complete all as specified and directed. |
| 72 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 73 | Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth.complete all as specified and directed. |
| 74 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 75 | S&F 110mm PVC (SWR) junction (single T) equal & unequalcomplete all as specified and directed. |
| 76 | S&F 75mm PVC (SWR) junction (single T) equal & unequal complete all as specified and directed. |
| 77 | M&L forPVC(SWR) bends of dia 110mm.complete all as specified and directed. |
| 78 | M&L forPVC(SWR) bends of dia75mm.complete all as specified and directed. |
| 79 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors.complete all as specified and directed. |
| 80 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors.complete all as specified and directed. |
| 81 | Cutting into existing manholes for connecting new drains for pipe of 100mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in M-15 grade (Nominal mic) using 20mm graded crushed stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed. |
| 82 | S&F towel rail brass chromium plated 20mm dia 600 mm longcomplete all as specified and as directed. |
| 83 | S&F soap dish, vitreous China white, approximate size (160x 160x90)mm complete all as specified and directed. |
| 84 | S & F harrison rail ,mild steel ,chromium plated with fixing brackets,stope,rollers etc. complete all as specified and directed. |
| 85 | S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 86 | S&F instop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed. |
| 87 | S&F20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 88 | S&F rotational moulded polyethylene water storage tank 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed. |
| 89 | S & F ball brass valves, high pressure, with polythene float and flynutcomplete, screwed for ironpipe or brassferrule and fixed complete all as specified and directed. |
| 90 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cm (1:6) complete all as specified and directed. |
| 91 | M & L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 92 | E/M Work |
| 93 | Material and labour for point wiring surface type with two single core 2.5 Sq mm (nominal area) FRLSPVC insulated and unsheathed,multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulatorete includingmulti-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 2.5 Sq mm for one 5 PIN 15 Amps socket outlet on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sq mm all as specified and directed by Engr-in-Charge.( circuit to be laid separately ) |
| 94 | M/L drilling and tapping cast iron water mains (in position) for branch connections of internal dia 15 mm.complete all as specified and directed |
| 95 | S & F storage type electric water heater of 25 Ltrs capacity, 240 volts, 5 star rated, input 2000 KW, PUF insulated fitted with stainless inner container and copper coil of BEE 5 star rating models, max working head of water 25 Ltrs, fixed to wall with suitable MS tower/anchor bolts,Inlet/Outlet pipes incl PVC connections grouted to wall. Make - Crompton model Arno Neo-5Sor equivalent in Havells/CG/Usha/Jaguar. |
| 96 | Supplying , installing , Testing and commissioning package type water filteration plant with following accessoriesas per the standards and complete all as specified and as directed by the Engr- in -charge.Make : As per approved makes ofE-in-C"s Branch/CEEC/CESZ or equivalent make with ISI Marked approved by GE. |
| 97 | (i) Dual media filter with necessary accessories complete for manualback wash , suitable supports for mounting pressure gauges , orifice plates . The filter shall be made of MS with epoxy paint protective coating . The cost of filter shall also include intial charges under bed & multi-grade filter media to suit the requirement etc Max working pressure is 3.5 Kg/sqcm and max flow rate is 18.00 Cum/Hr , at 12 Hrs cycle, size offilter containeris 1300 mm dia , 1500 mm Height of straight , shell end 4 mm and dish end 5 mm . Complete as per the standards. |
| 98 | (ii)Activated carbon filterwith necessary accessories complete for manualback wash , suitable supports for mounting pressure gauges , orifice plates . The filter shall be made of MS with epoxy paint protective coating . The cost of filter shall also include intial chargesoffiler media to suit the requirement etc Max working pressure is 3.5 Kg/sqcm and max flow rate is 18.00 Cum/Hr , at 12 Hrs cycle , size offilter containeris 1400 mm dia , 1500 mm Height of straight , shell end 4 mm and dish end 5 mm . Complete as per the standards. |
| 99 | (iii)Activated electronic dosing system for dosing chlorine into the treated water with pre-set dosage based on the quantity of water . the dosing system shall consist of electronic dosing pump with positive displacement type with adjustable stroke length and frequency . The quoted rate shall also included 100 ltrs HDPE chemical soluton tank, starter for dosing pumpwith necessary electrical work complete to make the operation automatic with the flow rate of 6 LPH . Complete as per the standards. |
| 100 | (iv) MS pipe 100 mm dia for inter connections of media filterswith necessary flanges, bolts,nuts, neoprene gaskets , with necessary control valves , non return valves etc , complete , 65 NB pipe size. Complete as per the standards. |
| 101 | Supply & Laying, jointing, testing Ductile iron pipe 100 mm dia with spigot socketed ends centrifully cast, class k9, tyton joints conforming to IS-1536-1976 laid in trenches of the following sizes as specified and directed by Engineer-in-Charge. |
| 102 | Material and labour for supply and fixing including jointing and testing of DI sluice valves class 1.0, ISI mark flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets forthe follwing sizes complete all as specified :- |
| 103 | M & L for cutting of CI/DIpipe in position for reducting to required length for insertion of new tees, branches etc of 150 mm size complete all as specified and directed, |
| 104 | Material and labour for rubber gasket joints for 100 mm dia DI pipe, in repair including jointing materials complete all as specified and directed. |
| 105 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLSPVC insulated and unsheathed,multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulatorete includingmulti-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc completeall as specified and directed for following : - ( colour code to be followed). |
| 106 | (a) One light/one fan/one exhaust point controlled by one, oneway switch. |
| 107 | (b) One socket outlet 5 Amps 5 Pin on independentboard |
| 108 | (c) One socket out let 5 Amps 5 pin on same board |
| 109 | All as per item No 99 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed by Engr-in-Charge.( circuit to be laid seperatly ) Make - Havells / Polycab/ KEI/ Nicco/ Finolex |
| 110 | S & F modular socketmultipurpose 3 pin 6/16 Amps 2 module. |
| 111 | M/L for modular switch piano type 6 Amps single pole one way . |
| 112 | S&Fmodular switch piano, 16 Amps, single pole, one way complete all as specified and directed. |
| 113 | M/L for modular socket outlet2/3 pin 6 Amps combined 2 module . |
| 114 | S/F ceiling rose , 3 phase/ pvc/ polycarbonate, isolated body . |
| 115 | Supply & fixing modular white cover plate with frame for fixing of modular switches of following :- |
| 116 | Ditto but 12 module |
| 117 | Ditto but 6 module |
| 118 | Ditto but 3 module |
| 119 | Ditto but 2 module |
| 120 | S & F blank speacer plate for single module |
| 121 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed. (Make: Havells cat part No. DHDPSHODRW 08 or as per list of approved makes enclosed hereinafter) |
| 122 | S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 123 | S&F MCB single pole 6 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 124 | S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed. |
| 125 | S&F basic all purpose surface & wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all accessories internally pre-wired, 20W, 6500K, 240V and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Havells Lumiline Cat No.LUMILINEBS20WLED865SPCWH or equivalent in Philips/ Bajaj/ Crompton) |
| 126 | S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size.complete all as specified and directed |
| 127 | S&F House service bracket (hook type) complete with 3 meter long GI pipe 40 mm dia medium grade, two Nos 90 degree bends, MS hook and stay or guy complete and making good disturbed surfaces complete all as specified and directed. |
| 128 | S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed. (Make: Crompton Model No Drift Air 12" or equivalent in Havells/Bajaj) |
| 129 | Supply and fixing building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aliminium IP-66 high power LED light 20 wattcomplete with fixing arrangement including bracket etc all as specified and directed. (Make- Cromton Astra Neol Cat No. LSTS-20-CDL-M/Philips/Bajaj/). |
| 130 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: GI Earthing lead upto 7.5m in length is deemed to be included in the unit rate. The lead required beyond 7.5m shall be measured and paid for separately) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
