Completion Of 10 Bed Room Hut At Verinag Including Landscaping And Development Of Water Channel.
Tender Value
31.25 Lakhs
Estimated cost
Bid Submission
13 Jun 2022
0 days left
EMD
62500
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
verinag → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Completion Of 10 Bed Room Hut At Verinag Including Landscaping And Development Of Water Channel.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantaling of existing damaged / renundant CGI/ Hi-rib roofingincluding stacking of serviceable material and diposal of unserviceable material as per directions of Engineer-in-charge complete. |
| 2 | Dismantaling of existing truss with all members including damaged eaves boarding and soffit including stacking of serviceable material and diposal of unserviceable material as per directions of Engineer-in-charge complete. |
| 3 | P/F track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel. The sheets shall have wide panes with 3 No. stiffing ribs, effective water shedding and special male/female ends with fuil return legs on side lapps for purlins support and anti capillary flute inside lapp. The sheets shall have a hot dip metallic coated of zinc and aluminum (150 gms/sm) zinc/aluminum coating mass total on both side AZ-150 as IS-1397,550 PMA, yeild stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area).50mm (Including cost of ridges / valleys of plain colour coated sheets complete) |
| 4 | P/F plain colour coated sheets fixed with nails and GI limpet washers including cost of all material, leads, lifts and all carriages upto site of work complete.(0.63mm thick) |
| 5 | P/L Double charged premium quality vitrified floor tiles in different sizes QUOTONE, KAJARIA, SONMANY or equivalent make (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.(size 600x600 for floors) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) using crushed aggregate includingall carriages / head load upto site of work complete. |
| 7 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meters lead as per directions of Engineer-in-charge complete.1:3:6 or richer mix (i/c equivalent design mix) |
| 8 | Dismantling Tile / Marble stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 9 | Disposal of excavated material manuallyand then by mechnical transport beyond 50 mtrs. Upto 2-3 kms beyond muncipal limits as directrd by Engineer-in-charge at site of work complete. |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length: First class kail wood |
| 11 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood-30mm. |
| 12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood-30mm |
| 13 | P/F of 12mm thick heavy duty ornamental type following Brass Hardware fittings of approved quality complete.(sample to be approved by Engineer-in-charges) |
| 14 | a) 125mm Handle. |
| 15 | b) 100mm Tower bolt. |
| 16 | d) 150mm Tower bolt. |
| 17 | e) 150mm Handle. |
| 18 | f) Ornamental Al-drop 300mm. |
| 19 | P/F Balusters made of Ist class kail wood with 50 mm x 750mm height ornamentally lathed kail wood pegs fixed with C/C distance of 150 mm given it a victorian look ( Approved pattern / design ) including cost of polish / SEP finishing to be approved by Engineer-in-chargecomplete job. |
| 20 | P/F 75mm top railing of Ist class deodar wood in straight / curved lengthsincluding cost of polish / SEP finishing to be approved by Engineer-in-charge complete job. |
| 21 | P/F of 12 mm thick Nordic Pine wall paneling (T&G) fully finished & four sides planned, fungus and termite proof (seasoned moisture content 8% to 15% imported type ISO :14001 approved including fixing with head less nails and inclusive all carriages, all taxes of allied material involved complete. (Including buloo wood frame work by 50x50mm battens not more than 600mm C/C both way,12mm thick ply wood and two or more coats of touch wood polishing) |
| 22 | P/F wooden moulded corner beading of size 50x50mm (Base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming cost on unexposed surface etc. complete in all respects.(Second class kashmiri kail wood) |
| 23 | Providing wood work in frammes of false ceiling,partitions etc. sawn and fixed in position.(Kashmiri local Budloo Wood) |
| 24 | Providing and applying of sanding sealer and preparing the surface for final finish with touch wood polishing (two or more coats) on the sealer surface with spray gun all complete. |
| 25 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building / structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requitement of site, made with 40mm dia. M.S. tube, placed 1.5 tr. c/c horizontal and vertical tubes joint with cup and lock system with M.S. tube, M.S. tubes challis M.S. clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and / or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened wiht bracings, runners connecting with the building etc. where ever required. if feasible for inspection of work at required location with essential safety features for the work men etc. complete as per directions and approval of Engineer-in-charge. |
| 26 | Finishing wall withacrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 28 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 29 | Supplying/filling dry stone soling tightly hand packed under foundation & under floors includingall carriages / head load upto site of work complete. |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) using crushed aggregate includingall carriages / head load upto site of work complete. |
| 31 | Earth work in excavation by mechanicalmeans (hydraulic excavator)in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr. In width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead 50 metres (All kinds of soil) |
| 32 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) using crushed aggregate including all carriages / head load upto site of work complete. |
| 33 | Stone work in plain Ashler in superstructure (size 300x200 face with 150mm depth)upto floor V level in cement mortar 1:6 (1 cement: 6 course sand) incld. pointing with cement mortar 1:2 (1 white cement :2 stone dust) Devri stones and including all carriage upto site of work complete.(Rough chiseled dressed) |
| 34 | P/F of following size of PVC (Prine make) pipe including cost of (B-type, with specified adhesive with necessary fittings i.e. Bends, Tee, Collar, Trap etc. and clamps complete. |
| 35 | a) 100mm dia. |
| 36 | b) 75mm dia. |
| 37 | Constructionof following RCC Pre-castmanhole covers of M-20 grade 75mm thick and reinforced with 8mm steel bars @ 50mm c/c bothways with 2 No. Handles including plastering and all carriages / head load upto site of work complete.(24\"x24\" size) |
| 38 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 course sand) RCC top slab with 1:2:4 (1cement : 2 course sand :4 graded stone agg. 20mm nominal size) foundation conc.1:4:8 (1 cement :4 coarse sand : 8 graded stone agg.40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 course sand) finished with floating coat of neat cement & making channels in cement conc.1:2:4 mix (1 cement :2 course sand : 4 stone agg.20mm nominal size)finished with a floating coat of neat cement slurry of size 30x30xupto 30 cm complete and making channels in cement concrete 1:2:4 (1 cement : 2 cousrse sand : 4 graded stone aggregate 20mm nominal size) including all carriages / head load upto site of work complete.(600x600mm) |
| 39 | Engagement of skilled carpentors / black smith for allied worksetc. compete job as per the directions of Engineer-in-charge complete. |
| 40 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (Two or more coats)on new work. |
| 42 | Supply, stacking and filling of good earth at site incld. dressing, watering, spreading in layers, and watering each deposited layer, breaking of clods and rolling with box scrapper attached with tractor incld. all carriages of materials androyalty etc. involved complete in all respects. |
| 43 | Steel work welded in built up sections, framed workincld.cutting,hoisting, fixing in position and applying coat of approved steel primer(two or more coats), using structural steel as required in grating frames, guard bars,ladders, railing,brackets, gates and similar work.(as per approved design) incld. all carriages / head load upto site of work complete. (Hallow section) |
| 44 | P/F C.P. Brass sanitary fittings(Jaguar or equivalent make) all complete:- |
| 45 | a)Soap case. |
| 46 | b) Towel ring. |
| 47 | P/F 600x120x5mm glass shelf with edges round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete. |
| 48 | P/F 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 49 | Providing and fixing of following size dia G. I pipe lines to walls, ceiling , floors, earth work in excavation, back fitting including cost of pipe heavy grade B class with necessary fittings Uning /Nipple Reducer/Tee/Elbow and clamps complete. |
| 50 | a) 20mm dia. nominal bore. |
| 51 | b) 25mm dia. nominal bore. |
| 52 | P/F of 20mm dia. size Ballvalves / CV fully way valve make of cost brass including CI well complete. |
| 53 | P/F of 15mm dia. size Ballvalves / CV fully way valve make of cost brass including CI well complete. |
| 54 | P/F of water Heater Gyser 50 litres capacity (Venus / Recold make) inclulding cost of all necessary fittings etc. complete. |
| 55 | P/F of 1.0 HP motor / Pump from Reservior tanks to over head tanks of standard make including supply, installation, testing and commissioning with proper power supply and pannel board (on/off) complete job. |
| 56 | P/F of white vitrous china box type wash basin of approved quality complete with wooden box including all fittings, cutting and making good the walls wherever required complete in all respects.(Hindware / Cera make) |
| 57 | Providing & laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing including all carriages / head load upto site of work complete. |
AI Tender Summary
Tender Timeline
Jun 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender