Construction Of Room.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jun 2022
0 days left
EMD
20500
Bank guarantee accepted
Document Fee
1300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madhogarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Room.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of room 9x6 |
| 2 | Cleaning Of Jungle |
| 3 | Boaring holes of 250 mm dia piles of double under reamed of 500 mm dia bulb and 3.5m deep |
| 4 | Excavation in foundation in black cotton soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation . |
| 5 | Sand filling in plinth including ramming dressing and extra cortage from 2 km…. |
| 6 | Cement concrete in 1:4:8 cement sand22.4-53mm Granite stone ballast in foundation including supply of all materials,, labours and T&P etc.Required for proper completion of the work |
| 7 | M 150 brick work in 1:6 cement and Coarse sand ofmortar in foundation in one brick thick wall including supply of all materials, labours and T&P etc. required for proper completion of the work . |
| 8 | R.C.C work with cement approved coarse sand and 20 mm gauge Granite stone gritt for plinth beam1:1.5:3excluding supply of reinforcement and its bending but including its fixing and bindingthe same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item . |
| 9 | Mild steel or iron in plain work such as reinforced concrete wrought to required same as necessary including bending for proper completion of the work. |
| 10 | M 150 brick work in 1:6 cement and Coarse sand ofmortar in S/Sin one brick thick wall including supply of all materials, labours and T&P etc. required for proper completion of the work . |
| 11 | 12 mm. thick plaster with 1:4 cement mortar over brick work minimum thickness not to be less than 3/6\"(12mm) thick including supply of all materials, labours and T&P etc. required for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar.in perapet wall. |
| 12 | 15 mm. thick plaster with 1:4 cement mortar over brick work minimum thickness not to be less than 3/6\"(12mm) thick including supply of all materials, labours and T&P etc. required for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar.in perapet wall. |
| 13 | 2 cm (3/4\") 20 mm thick plaster in 1:3 consisting of one part yf. Cement an 2 parts of approved coarse sand laid in panels. finished with 3mm (1/8\") floating coat of neat cement or marble dust in ratio 5:1 including supply of all materials, labours and T&P etc. required for proper completion . |
| 14 | 40 mm C.C. flooring 1:2:4 cement:C/sand and 20 mm stone grit Excluding base concrete of work at site. |
| 15 | Supply and Fixing of glass strip |
| 16 | Supply of Approved M.S. Z section windows and Ventilators Excluding cost of glass panes but including supply of all materials its fabrication nut & bolt hold fast required complete of all respect at site. |
| 17 | Supply of M.S angle iron door, ventilator frame made of approved M.S. iron including drilling holes welding and hings of required size nut & bolt etc. as per drawing for proper completion of work at site. |
| 18 | Providing and fixing 1 mm thick ms sheet garage door with frame of 4x40x6 angle iron , 3.15 mm thick ms gusset plates at the junction corner i/c supply and fixing of necessary fittings. |
| 19 | Supply and Fixing of Glass panes for windows |
| 20 | White cement based putty 1 mm thick approved brand and making smood surfaces |
| 21 | Distempring two coats with oil bound distamper or approved brand on old work |
| 22 | Finishing walls with two coat water proofing cement paint of approved quality on pervisouly old treated surface with this paint to give an even shade including supply of all material, labour completion of work. |
| 23 | Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed paint or clear synthetic varnish including supply of all materials labour T&P etc, required for proper completion of the work. Paint to be used should confirm to the ISI no. 103 1950 (in two coat.) |
| 24 | Earth filling in plinth including rammingdressing and extra cartage from 2 km…lead distance complete work at site |
| 25 | Supply and fixing 110 mm pvc pipe complete with rose heads bends M.S.Clamps 2.5cmx3mm fixed to walls by 15cm long 6mmnail and including repair of plaster pointing etc. if damaged during fixing of the pipes including cost of all material labour, tools and plants etc. required proper completion of work. |
| 26 | Providing & laying \"Brick Bat Coba\" 100 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing `compound in1:4 cement and coarse sand mortar finished smooth & Top mashed false square 30cmx30cm and side wall parapet shall be monotypic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finishing plaster mixing with acetic water proofing compound @2% by weight & including supply of all materials labour T&P etc.required for proper completion of work and as per direction of E.I.C. |
| 27 | Supply and fixing of Granit Black Stone sign board including painting and lettering as directed by Engineer-in-charge. |
| 28 | Add for Photography etc. |
| 29 | Electrical Work |
| 30 | Wring point for light with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside plano type switch & celling rose angle/ batten holder on 3mm thick phenolic paminated backlite sheet etc.complete in all respect. |
| 31 | Wring point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sqmm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside plano type switch & celling rose angle/batten holder on 3mm thick phenotic paminated backlite sheet etc. complete in all respect. |
| 32 | Wring point for plugwith 1.5 Sq. mm FRPVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside plano type switch & socket etc. complete in all respect. |
| 33 | Supply & wiring of submains with two number 4.0 sq.mm PVC insulated single core copper conductor in 20mm dia heavy duty PVC conduit with 1 no. 2.5sq.mm FR PVC insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. |
| 34 | S/F of 06 Amp to 32 Amp SPMCB (10KA) .CAT - B |
| 35 | S/F of 63 Amp. DP Isolator Cat - B |
| 36 | S&F surface/flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.Cat - B |
| 37 | Supply & burying of Earthing Electrode T-19 (Hot Dip Galvanized), Length 300mm, Outer pipe 50mm, inner pipe 25, Terminal dia 12mm, Outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip galvanization up to 100 micron filled with crystllingnce conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm squre C.I. frame with hinged cove & masonty housing. (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra) Make: As approved in U.P.P.W.D., & C.P.R.I. Certified. |
| 38 | Supply and Laying of 25x3 mm G.I Strip. |
| 39 | Supply and fixing of power plug with 15 A / 250V flush type switch and 3 pin 15 A/250V, Flush type socket in suitable M.S. box of 175mmx50mm size switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. |
| 40 | Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mmfor pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. |
| 41 | S/F of Electronic Fan regulator 120-280 V ISI marked on the existing switch board including making connection, required material, labour T&P etc. complete in all respect. |
| 42 | Erection & testing of ceiling Fan and regulator etc. excluding supply of down rod complete in all respect. |
| 43 | S/F of LED Street light Fitting having dia cast aluminium body diffuser with driver set suitable for 75 watt to 90 watt confirming to IP 66 and above protection complete in all respect. Cat - AAA |
| 44 | Supply and fixing LED tube light with batten suitable for 1x22 watt. LED tube Light comp. including tube complete in all rexpects cat-AAA. |
| 45 | S/F of 1200 mm Ceiling Fan ISI |
| 46 | S/F of Fan sheet cover of backelite sheet |
| 47 | S/Laying of Sevice Cable 10 Sqmm x 2 Core |
| 48 | S/F of LED Bulb 9 watt |
AI Tender Summary
Tender Timeline
Jun 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender