Supply Of Set Of Seats For Lhb Gs ( Ls-5 ) Coaches, Cushioning Material To Rdso Spec. # C-K607 Rev-02, Upholstery To Rdso Specset Of Seats For Lhb Gs ( Ls-5 ) Coaches, Cushioning Material To Rdso Spec. # C-K607 Rev-02, Upholstery To Rdso Spec, Set, jabalpur-Madhya Pradesh

Supply Of Set Of Seats For Lhb Gs ( Ls-5 ) Coaches, Cushioning Material To Rdso Spec. # C-K607 Rev-02, Upholstery To Rdso Specset Of Seats For Lhb Gs ( Ls-5 ) Coaches, Cushioning Material To Rdso Spec. # C-K607 Rev-02, Upholstery To Rdso Spec, Set Of Seats For Lhb Gs ( Ls-5 ) Coaches, Cushioning Material To Rdso Spec. # C-K607 Rev-02, Upholstery To Rdso Spec. # Rdso / 2008 / Cg-07 Rev-Nil With Amendment Slip No-4, Follow Colour Shade Alnac-03 For Upholstery, For Painting Of The Visible Metallic Portions Of Seats The Colour Shade Ral-9006 To Be Followed., As Per Drawing: Mplsblgsasp Version 6, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat / Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat / Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust / Water. For The Following Items ( When Covered Under Seat And Berth Set ) The Itemwise Packing Instruction ( Latest Version ) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc. Page 1 Of 3 Run Date / Time: 04 / 06 / 2022 13:25:16Crws / West Central Rly Tender Document

Refer document

Refer document

Refer document

Sl. No.	Item Description
1	Set Of Seats For Lhb Gs (Ls-5) Coaches, Cushioning Material To Rdso Spec. # C-K607 Rev-02, Upholstery To Rdso Spec
2	SET OF SEATS FOR LHB GS (LS-5) COACHES, CUSHIONING MATERIAL TO RDSO SPEC. # C-K607 REV-02, UPHOLSTERY TO RDSO SPEC. # RDSO/2008/CG-07 REV-NIL WITH AMENDMENT SLIP No-4, FOLLOW COLOUR SHADE ALNAC-03 FOR UPHOLSTERY, FOR PAINTING OF THE VISIBLE METALLIC PORTIONS OF SEATS THE COLOUR SHADE RAL-9006 TO BE FOLLOWED., as per Drawing: MPLSBLGSASP VERSION 6, Packing Instruction: SEAT AND BERTH: ALL PROTRUDING PORTIONS OF SEAT/BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF REQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION . EACH INDIVIDUAL SEAT/BERTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THICKNESS 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BIODEGRADABLE BUBBLE SHEET PACKING LEAVING SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE PROPERLY WRAPPED ALL ROUND IN THICK LAMINATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE COMPLETE ASSEMBLY SHOULD BE TIED WITH SUITABLE NYLON STRIPS. IT IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS OF DUST/WATER. FOR THE FOLLOWING ITEMS (WHEN COVERED UNDER SEAT AND BERTH SET) THE ITEMWISE PACKING INSTRUCTION (LATEST VERSION) WILL BE AS UNDER: FOR PACKING OF CHAIR ANGLES, EXPANDED METAL PARTITION FRAME, SUSPENSION STRAPS, SUPPORTS AND MOUNTING BRACKET THE PACKING INSTRUCTION NO. PI004 SHOULD BE FOLLOWED. FOR PACKING OF HARDWARE ITEMS THE PACKING INSTRUCTION NO. PI019 SHOULD BE FOLLOWED. FOR PACKING OF ACCESSORIES LIKE BEARING BRACKET, CHAIN BRACKET, CATCH ARGGT, HINGE BRACKET AND SLEEVES ETC. THE PACKING INSTRUCTION NO. PI020 SHOULD BE FOLLOWED. FOR PACKING OF LADDERS, THE PACKING INSTRUCTION NO. PI031 SHOULD BE FOLLOWED. FOR PACKING OF LUGGAGE RACKS THE PACKING INSTRUCTION NO. PI042 SHOULD BE FOLLOWED.A LIST SHOULD BE PASTED ON EACH BOX SHOWING PURCHASE ORDER NO, DESCRIPTION, DRG / SPEC NO, QTY, FIRM NAME & ADDRESS, DATE OF DISPATCH ETC. Page 1 of 3 Run Date/Time: 04/06/2022 13:25:16CRWS/WEST CENTRAL RLY TENDER DOCUMENT