Tender For Lower Water Supply Scheme E To Rakhoh, Cholthara, Awah Devi, Tihra And Adjoining Village In Teshil Dharampur, District Mandi ( H.P. ) Under Har Ghar Ko Nal Se Jal ( Jjm ) ( Sh:- Construction Of 4 Nos. Infiltration Gallery, 5 Nos. Pum
Tender Value
1.68 Crore
Estimated cost
Bid Submission
22 Jun 2022
0 days left
EMD
2.01 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tihra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Lower Water Supply Scheme E To Rakhoh, Cholthara, Awah Devi, Tihra And Adjoining Village In Teshil Dharampur, District Mandi ( H.P. ) Under Har Ghar Ko Nal Se Jal ( Jjm ) ( Sh:- Construction Of 4 Nos. Infiltration Gallery, 5 Nos. Pump Houses, Chemical House And Repair Of Pump House ) .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Jun-2022 | Corrigendum | Date | 22-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of excavated earth upto a lead of 20 mtrs inPick/ jumper work as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 2 | Excavation in Foundation trenches in eartwork in all classification of soil, lift upto 1.5m stacking the excavated soil not more than 3m clear from the edges of the excavation and then returning the stacked soil in 15 cm layer when required into plinths sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth complete in all respect with carriage in all leads & lifts and to the entire satisfaction of Engineer-in-Charge. |
| 3 | Earth without dewatering |
| 4 | Earthwork with dewatering |
| 5 | Providing and laying cement concrete work1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from workin |
| 6 | Foundation and plinth complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge. |
| 7 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge. |
| 8 | Providing and laying cement conrete 1 : 3 :6 . ( 1 cement : 3 sand and : 6grade stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth upto all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. |
| 9 | Providing and laying cement concrete work 1:4:8( 1 cement:4 sand :8 graded stone agg. 40mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth complete as per direction and to the entire satisfaction of Engineer-in-charge. |
| 10 | Providing and laying cement concrete 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40mm nominal size) curing complete excluding cost of form work in foundation and plinth as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 11 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling upto all height and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 12 | Foundations, footings bases of columns and the like and mass concreteas per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 13 | Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 14 | Vertical surfacessuch as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 15 | Columns, pillars, posts and struts Square, rectangular or polygonal in plan. in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 16 | Sides and soffits of beams, beam haunchings,cantilivers, bressumers andlintels not exceeding 1 meter in depth in all heights from flooras per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 17 | Edges of slabs and Breaks in floors and walls.Under 20 cm. Wide as per the direction and to the entire satisfaction of Engineer-in-charge. |
| 18 | Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5 sand: 3 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 19 | Foundation footings bases of columns and the like; and mass concrete as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 20 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge. |
| 21 | Columns, Pillars & Posts etc. complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge. |
| 22 | Walls any thickness including attached pillaster buttresses, plinth and string courses from top of foundationup to all floor level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge. |
| 23 | Lintels,beams, girders, bressumers and cantilevers upto floor two level within all lead and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 24 | Providing in RCCwork smooth finishing of the exposed surface with cement mortor 1:3 ( 1 cement: 3 sand) complete in all lead and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 25 | Filling in plinth with sand under floor including watering, ramming, consolidating & dressing complete within all leads and lifts as per direction and to the entiresatisfaction of Engineer-in-charge. |
| 26 | Stone filling behind the long wall facing towards U/S side complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge. |
| 27 | Brick Work using common Burnt Clay Building bricks 2nd Class in Foundation & Plinth & in Supersturcture in 1:3 (1 Cement :3 Sand) complete in all respect with carriage in all leads & lifts and to the entire satisfaction of Engineer-in-Charge. |
| 28 | Boulder/Stone filling dry hand packed tightly complete under lean conrete toprevent the entry of surface water complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge. |
| 29 | Providing and laying 20 cm thick composit stone masonry with stone facing of chisel dressed stone one line dressed in cement mortar 1:6 ( 1 cement : 6 sand) and concrete backing with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) on inner face of wall including centring, shuttering and propping complete within all lead and lift as per direction and to the entire satisfactionof Engineer-in-Charge. |
| 30 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position. (2nd class deodar wood) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 31 | Providing and Fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. (2nd class deodar wood) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 32 | Providing and fixing angle iron door, window, clerestory window frame manufactured from commercial steel iron section 40x40x6mm, thickness including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm or rigidly fixed by mechanical means, lugs with split and tails to each jamb including steel butt hinges 2.5mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as desired by Engineer-in-charge. |
| 33 | Providing and fixing steel glazed doors, windows and ventilator of standard rolled steel sections, joints mitred and welded with 16x3.15mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) with wooden plugs and screws or rawl plugs and screws or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metals ash putty of approved make complete including applying a priming coat of red lead paint, Steel doors: |
| 34 | Double leaf doors. |
| 35 | Steel windows: Fixed steel windows. |
| 36 | Providing 40x3 mm flat iron hold fast 40 cm long including Fixing to frame with 10 cm da bolts nuts and wooden pluges and embencing in C.C. block 30x10x15 cm 1:3:6 (1 cement : 3 sand : 6 gradedstoneaggregate 20 mmnominal size). |
| 37 | Providing & fixing bright finished brass tower bolts (barrel type) with screws etc. within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 38 | 250 x 10 mm |
| 39 | 200x10 mm |
| 40 | Providing and fixing bright finished brass sliding door bolt with bolts and nuts screws etc within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 41 | 300 x 16 mm |
| 42 | Providing and Fixing bright finished brass handles with necessary screws etc. complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 43 | 125 mm |
| 44 | 100mm |
| 45 | Providing and Fixing M.S. sliding door bolts, black enamelled with bolts and nuts screws etc. complete. |
| 46 | 250 x 16 mm |
| 47 | Providing and Fixing M.S.tower bolts ( barel type) wqith screws etc. complete. |
| 48 | 200 x 10 mm |
| 49 | Providing and Fixing M.S. handles with necessary screws etc. complete. |
| 50 | 125 mm |
| 51 | Providing and Fixing oxidized M.S. Hooks and Eyes 150 mm within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 52 | Providing and Fixing 100 mm bright finished brass floor door stopper with rubber cushion screw etc. to suit shutter thickness complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 53 | Providing and laying Duro stone vetrified tiles(300x300mmx10mm) in grey/coloured or of approved shade in flooring,treadsofstepsandlanding laid on a bed of 12mm thick cement mortar1:3(1cement:3sand)laid overandjointedwithneatcement slurryfinishedwithflushpointingin whitecementmixedwithpigment of required shade to match the shade of tiles complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 54 | Providing and fixing 10mm thick anti skidwaterproofstainandimpect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mmmanufacturedof approvedshadeandcolourin flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1cement :3 sand)jointed with cement slurry mixed with pigment to match the shade oftilesas required complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 55 | 6mm cement plaster to ceiling in cement mortar 1:3 ( 1Cement :3 Sand) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 56 | 15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement: 6 sand) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 57 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete . |
| 58 | White washing with lime on undecorated wall surface two coats to give an even shade I/c throughly brooming the surface to remove all dirt, dust, mortar, dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge. |
| 59 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 60 | Finishing wallwith water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 61 | Applying priming coat over new wood and wood based surfaces after and inciuding preparing the suface be thoroughly cleaning oil grease dirt and othr foreign sand papering and knotting Readymixed paint brushing wood primer pink within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 62 | Painting two coats (excluding priming coat) on previous painted wood and wood based surfaces with ready mixed paintto give an even shade including cleaningthe surface of dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 63 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paintto give an even shade including cleaningthe surface of dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 64 | Providing & fixing 0.60 mm Thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns primer coating i/c fixing with prepainted iron J or L-hooks bolts & nuts 6 mm dia with prepaintedlimpet and rubber washer complete with all accessories as required as per direction and to the entire satisfaciton ofEngineer-in-charge. |
| 65 | Providing mild steel / Tor steel reinforcement for RCC work including bending & placing in position complete upto floor two level complete in all respect with carriage in all leads & lifts and to the entire satisfaction of Engineer-in-Charge. |
| 66 | Steel work welded in build up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackedts and similar works complete in all respect with carriage in all leads & lifts and to the entire satisfaction of Engineer-in-Charge. |
| 67 | Providing and laying no fine cement concrete 1:6 (1 Cement : 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in cement mortar 1:6 as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 68 | Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 69 | Providing and fixing Neelgiri/Maxican grass truf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and then rolling the surface with light roll make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass established properly as per direction and to the entire satisfaction of the Engineer in Charge. |
| 70 | Fixing of fencing Panel of size 1.20x1.80 of jali 25x25mm mesh welded to M.S. black tube 32mm dia of 14 gauge with M.S. flat cover 20x3mm, M.S. hold fasts 7 Nos made out of M.S. flat 32x5mm including cutting welding painting with red oxide paint complete in all respect and as per direction on Engineer-in-charge. |
| 71 | Providing and fixing white vitreous China pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern & C.P. flush bend and fittings & C.I. brackets, 40mm flush bend, overflow arrangementwith special of standard make and mosquito proof coupling of approved municipal design complete i/c painting of fittings and brackets cutting holes in walls and making good wherever required. |
| 72 | Jaquar Make EWC one piece LYS-WHT |
| 73 | Providing and fixing C.P. brass pillar cock of Jaquar Make Fonte Type within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 74 | Providing and fixing vitreous china wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 75 | White vitreous China Wash Basin size 630x450 mm with pedestal. |
| 76 | Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outletconnection, 15mm nominal bore ball valve and mosquito proof PVC cover with lockingarrangement including hoisting up to all heights above ground level :-1000 litres net capacity tank within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 77 | Providing and Fixing 600 mm x 450 mm bevelled edge mirror of superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screws and washer within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 78 | Providing and Fixing CP Brass towel rail complete with CP Brass brackets fixed to wooden plug with CP Brass screws 750 mm x 20 mm within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 79 | Providing and Fixing 600 mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 80 | Providing and fixing to wall, ceiling & floor, galvanised mild steel tube (Heavy Class), tube fittings & clamps i/c making good wall, ceiling and floor within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 81 | 20mm dia Nominal Bore TATA Make |
| 82 | 15mm dia Nominal Bore TATA Make |
| 83 | Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws :- Plastic container within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 84 | Providing and Fixing 100 mm dia cast iron plated grating of superior quality for floor, gully or Nahni trap within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 85 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 75mm Nominal bore within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 86 | Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 87 | Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 88 | Laying, jointing & testing of G.I pipe of following dia (light class)for outlets pipe &scour pipes etc. in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. (Labour rate) |
| 89 | 150 mm dia |
| 90 | Providing and fixing double flangedCast Ironsluice valveof following dia of Kirloskar/Leader make conforming to IS:14846/2000with up to date amendment as per Class PN-1 to withstand in normalseat pressure including welding with M.S. flanges table as per IS 6392-1971 including carriage in all leads and lifts as per direction and to the entiresatisfaction of Engineer-in-Charge. |
| 91 | 150 mm Dia |
| 92 | Providing & fixing Cast Iron Man hole cover with framehaving frames size of 560 mm internal dia shouldnot be less than 116 kg completeas per direction and to the entire satisfaction of Engineer-in-Charge. |
| 93 | Providing & fixing precast concrete Man hole cover with frame, conforming to IS 12592-2002 having size of 560 mm dia completeas per direction and to the entire satisfaction of Engineer-in-Charge. |
| 94 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 95 | Group A |
| 96 | Group C |
| 97 | Supplying & Fixing of G.I. modular boxes of (140mmx78mmx50mm) size along with modular base and cover platefor modular switches in recess including providin and fixing 5 pin 5/6 Amp. modular socket outlet and 5/6 Amp modular switch, connection etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 98 | Supplying & Fixing of G.I. modular boxes of (140mmx78mmx50mm) size along with modular base and cover platefor modular switches in recess including providin and fixing 6 pin 15/16 Amp. modular socket outlet and 15/16 Amp modular switch, connections etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 99 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 100 | 20 mm dia |
| 101 | 25 mm dia |
| 102 | Supplying and drawing following sixe PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 103 | PVC insulated HRFR LS Copper conductor 1.5 Sq.mm. |
| 104 | 3X1.5 Sq.mm |
| 105 | 3X4.0 Sq.mm |
| 106 | Supplying and errection of 6 Amp to 32 Amp rating, 10 KA breaking capacity 240 Volts, C-curves minituature circuit breaker of following poles in the existing MCB DB complete with connections as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 107 | Single poleCat-A. |
| 108 | Supplying and Fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 109 | 25 Amps. Cat-A. |
| 110 | Supplyingand Fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 111 | Double door-6 way |
| 112 | Double door-8 way |
| 113 | Wiring for light/power plug with 2X10 Sq. mm. PVC insulated copper conductor single core cable in surface/recessed steel conduit along with 1 No.10 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 114 | Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No. 6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 115 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. |
| 116 | Exhaust Fan, Light duty, (Domestic) 225 mm sweep |
| 117 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and Fixing phenolic laminated sheet cover on the fan boxand earthing etc. as required. |
| 118 | Ceiling Fan 1400 mm sweep, Category-A |
| 119 | Supplying and Fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- |
| 120 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and Fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 121 | 25 Liter capacity water heater (Cat-A) |
| 122 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 123 | Supplying and laying 8 SWG copper wire at 0.50 mtrs below ground level for earth electrode conductor including soildering etc. as required within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
AI Tender Summary
Tender Timeline
Jun 18, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 22, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender