|
| 1 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) and all as specified and directed. |
| 2 | All as per item 1 above but exceeding 1.5Sqm but not exceeding 4 Sqm each |
| 3 | Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each. |
| 4 | Supply and fixing 2nd class hardwood of Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded orchamfered, put together with glue pinned at joints, and all as specified and directed. |
| 5 | Supply and fixing 30mm thick Flush shutter,solid core construction,with block board core and plywood face panels with commercial type on both sides incl hinges as per site requirement complete all as specified and directed. |
| 6 | Supply and fixing 35mm thick hard wood framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl hinges as per site requirementand all as specified and directed |
| 7 | Supply and fixing 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamferedor rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatsincl hinges as per site requirement and all as specified and directed. |
| 8 | Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification & drawing. |
| 9 | Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame incl hinges as per site requirement all as specified. |
| 10 | Supply and fixing 300 mm Al alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed. |
| 11 | Supply and fixing 150mm Al anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 12 | All as per item No 11 here in before but 100mm |
| 13 | Supply and fixing Extruded Aluminium alloy handles, fabricated type, anodised 150mm |
| 14 | All as per item No 13 here in before but 100mm |
| 15 | Supply and fixing100 mm long Stainless steel Butt hinges extruded. |
| 16 | Supply and fixing125 mm long medium weight MS Butt hinges extruded. |
| 17 | Material and labourfor preparation of new wooden/steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed. |
| 18 | Supply and fixing stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or serviceable fillets complete as directed by EIC |
| 19 | Supply and fixing in repair stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or old serviceable fillets complete as directed by EIC |
| 20 | Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed. |
| 21 | Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and all as specified and directed. |
| 22 | Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded and all as specified and directed. |
| 23 | Supply and fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed. |
| 24 | Supply and fixing 3mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed. |
| 25 | Material and labourpreparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 26 | Hacking out old broken glass panesfrom metal frame including punching and drilling out and galzing pins/spring clip and Supply and fixing sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete. |
| 27 | Hacking out old broken glass panesfrom metal frame including punching and drilling out and galzing pins/spring clip and s, Supply and fixing Figured glass 3mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane and securing with new oil putty and providing and fixing new metal beadings complete. |
| 28 | Supply and fix 5 mm thick plain glass pane to the existing aluminium window/ door of any size including necessary rubber gasket andaluminium clips etc complete including taking down old brokenglass pane complete including taking down old one and all as specifeid and directed. |
| 29 | Demolition ofConcrete (un reinforced) of any description and in anypositionnot otherwise specifically provided for |
| 30 | Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises. |
| 31 | Material and labourfor 15 mm thick screed bed in cement mortar 1:4 for layingfloor finishes under floor and all as specified and directed. |
| 32 | Material and labourfor rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc. |
| 33 | Material and labourfor non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match and all as specified and directed. |
| 34 | All as per item No 33 hereinbefore butin skirting including necessary cutting of tiles. |
| 35 | Material and labourfor 10mm thick colouredvitrifiedtiles (Square/rectangular ) polished ,area of each tiles not exce 0.36 sqm,in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match. |
| 36 | All as per item No 35 hereinbefore butin skirting including necessary cutting of tiles. |
| 37 | Material and labourfor non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match and all as specified and directed. |
| 38 | Material and labourforceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured / white cement to match the tiles and all as specified and directed. |
| 39 | Material and labourfor 25 mm thick PCC (1:2:4 ) type B1 using 20 mm graded stone agg as in sub base of floor ,levelling concrete in roof and complete all as specified and directed. |
| 40 | Taking down rough dressed stone laid in plinth protection/drain walls and removing mortar from and cleaning stones; stacking for measurement including all extra handling and removal and disposing off rubbish |
| 41 | Material and labourfor cement concrete 1:3:6 type C-2, 75 mm thick using 20mmgraded stone aggregates as in plinth protection finished fair and even with out using extra cement all as specified and directed. |
| 42 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar and all as specified and directed. |
| 43 | Material and labourfor Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and over 15mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 44 | Demolition of brick work / PCC Block / stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete |
| 45 | Material and labourpre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 . |
| 46 | All as per ser No 45 here-in-before but except block |
| 47 | Material and labourfor Modular Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in full brick thickwalls built in CM 1:4 complete all as specified and directed. |
| 48 | Material and labourfor Modular Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thickwalls built in CM 1:4 complete all as specified and directed. |
| 49 | Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed |
| 50 | Material and labourfor Keyed pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courss and all as specified and directed. |
| 51 | Taking down cement plaster of any description incl raking out joints, haking for key scrubbing down with water etc complete |
| 52 | Material and labourfor rendering 15mm thickin CM 1:4 on fair faces of brick work or concrete surfaces on external surfaces finished even and smooth without using extra cement and all as specified and directed. |
| 53 | Material and labourfor rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls. |
| 54 | Material and labourfor rendering 10mm thickin CM 1:4 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement and all as specified and directed. |
| 55 | Material and labourfor distempering walls with two coats of washable distemper oil emulsionon new surfaes over a coat of alkali resistant priming paint (white or tinted) as directedof distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified. |
| 56 | Material and labourfor two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed. |
| 57 | Material and labourfor treating with three coats of whitewash on new surfaes of walls incl necc preparation to give uniform and smooth finish all as specified. |
| 58 | Material and labourfor treating walls with three coats of whitewash on new surfaes of ceiling incl necc preparation to give uniform and smooth finish all as specified. |
| 59 | Material and labourfor 2mm thick wall putty on walls including complete removal of existing removal of existing any type of treatment. |
| 60 | Material and labourfor preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white washand all as specified and directed. |
| 61 | All asper Item No 61 but in ceiling |
| 62 | Material and labourfor preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of oil emulsion distemper and all as specified and directed. |
| 63 | All as per Item no. 62 but in ceiling. |
| 64 | Material and labourfor preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of cement based emulsion and all as specified and directed. (Make : Shalimar Shaktiman, Berger wall masta, & Asian Paints) |
| 65 | Material and labourfor preperation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed. |
| 66 | All as per Item No 65. but on wood surfaces |
| 67 | Material and labourfor servicing /easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling replacing welding broken hinges making good disturbed portion painting all as specified as directed by Engr-in –charge |
| 68 | Taking down door / window shutter with frame and all as specified and directed. |
| 69 | Supply and fixing anodised aluminium powder coated frame or grills as per pattern approved by GE for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc with sliding channel etc all as specified. |
| 70 | Supply and fixing anodised aluminium powder coated side hung / sliding door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified with powder coating of any colour. |
| 71 | Supply and fixing anodised aluminium powder coated sliding window and ventilator frame with shutters, fixed type without sash bar, aluminium sectionincluding necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified. |
| 72 | Supply and fixing brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed . |
| 73 | Supply and fixing in repairs brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed . |
| 74 | Supply and fixing in repair door closer Al die cast body hydraulically regulated, designation No. 1 universal type, suitable for door shutter complete all as specified and directed . |
| 75 | Supply and fixing in repair double actionfloorspringhydraulically regulated made up ofminimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steelcover, governingpivot madeofbrass,other parts made of mildsteelheavydutyandfixed complete all as specified anddirected. |
| 76 | Taking down defective aluminium door with glass panes and repairing floor stopper, bearing alignment etc. including replacement of any item required for proper functioning and refixing in the same position. |
| 77 | Stripping off tarfelt from old roof surfaces/sunken floor complete all as specified and as directed. |
| 78 | Material and labourfor plastering 10mm thick in CM 1:3 on brick or concrete surfaces complete all as specified and as directed. |
| 79 | Material and labourforApplying Oil Bound Bitumen primer at the rate of 0.20kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm having softening point not lessthan 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5 cm in longitudinal and transfers directions respectively of thereinforcement, tearing strength of 180 N/torch on application including min 10 cm side over lap and 15 cm end lap,incl one coat of aluminum paint over tarfelt of 125ml/sqm and all as specified and directed. |
| 80 | Material and labourProviding cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof,chajjas, coping, bed blocks and similar work including necessary form work. |
| 81 | Supply only Intergral water proofing compound |
| 82 | Taking out steel/plastic/cpvc water tubing and connections including cleaning for refixing 15 mm dia. |
| 83 | All as per item No 82 hereinbefore but 20mm dia. |
| 84 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 85 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 86 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 87 | Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTACPVC complete all as specified. |
| 88 | Supplying fixing of 25mm outer dia CPVC union complete all as specified. |
| 89 | Supplying and fixing of 20mm outer dia CPVC brass elbow and all as specified. |
| 90 | Supply and fixing 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors incl elbow, union complete all as per site requirement. |
| 91 | All as per item No 90 hereinbefore but 20mm dia. |
| 92 | Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of following sizes |
| 93 | Supply and fixing in repair angular stop valve 15 mm chromium platedconcealed, fancy type screwed down high pressure screwed both ends for iron pipe for 15 mm bore. |
| 94 | Supply and fixing in repairs Bib taps fancy type chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore |
| 95 | Supply and fixing in repairs pillar tap with capstan heads chromium palted screwed down high pressure with or withoutletter \"Hot\" or \"Cold\" with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore |
| 96 | Supply and fixing in repairs for CP brass health faucet alongwith flexible pipe and stay complete of approved make all as specified and directed. |
| 97 | Supply and fixing in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC frame fixed to wooden plugs with CP brass screws & cup washers. |
| 98 | Supply and fixing in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/wooden cabninet and repairing the disturbed surfaces to match with existing of approved make. |
| 99 | Supply and fixing in repairs viterous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to \"P\" or \"S\" incl connecting flush pipe with flushing rim all as specified |
| 100 | Supply and fixing in repair viterous china squatting pan \"Orissa pattern \" size 580 x 440mm white with integral foot rests incl connecting to \"P\" or \"S\" trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified |
| 101 | Supply and fixing in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etcand making good the disturbed surfaces all as directed |
| 102 | Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed |
| 103 | Supply and fixing in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed Make: Jaquar |
| 104 | Supply and fixingin repairs PVC flexiable pipe (Connecter) 15 mm dia, 450/650 mm long with check nut and bolt with washer all as specified |
| 105 | Supply and fixing in repairs PVC waste pipe 32/40mm bore for WHB & Sink |
| 106 | Supply and fixing of in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. |
| 107 | Supply and fixing of glass corner shelf as soap dish of size 10 x 10 inch all as spfd and directed. |
| 108 | Dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings. |
| 109 | Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipes. |
| 110 | All as per item No 109 above but bore of pipe 110 mm |
| 111 | Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm |
| 112 | All as per item No. 111 above but bore of pipe 110 mm with access door |
| 113 | Supply and fixing PVC (SWR)junction single(single T)equal or unequal with access door bore of pipe 75 mm |
| 114 | All as per item No . 113 above but bore of pipe 110 mm |
| 115 | Supply and fixing 125/ 110 mm bore PVC (SWR) floortrap plain with grating incl jointing with solvent cement |
| 116 | Material and labourfor post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes of 12mm diaetc. in apron and all as specified and directed |
| 117 | Material and labourfor post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and all as specified and directed |
| 118 | Material and labourfor post construction Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and all as specified and directed |
| 119 | Dismantling boarding, any description, fixed in any position with nails |
| 120 | Material and labourfor 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work and all as specified and directed. |
| 121 | Supply and fixing 18/19 mm thick Block boards, grade 2 quality interior grade commercial type, fixed withscrews to timber frame work and all as specified and directed. |
| 122 | M &L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions incl removal of old. |
| 123 | Supply and fixing 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectrogalvanised. |
| 124 | Supply and fixing40mm dia, brass cupboard knobs fixed with nut, screw and washer |
| 125 | Supply and fixing 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed |
| 126 | Supply and fixing brass Drawer handles, projection drop (50mm to 65mm) on screwed plate long and all as specified and directed. |
| 127 | Supply and fixing in repairs floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and all as specified and directed. |
| 128 | Supply and fixing in repairs MS chromium plated 25mm dia heavy duty curtain rods and all as specified and directed. |
| 129 | Supply and fixing stainless steel fancy type curtain brackets and all as specified and directed. |
| 130 | Supply and fixing stainless steel, holding clips for curtain rod and all as specified and directed. |
| 131 | Supply and fixing in repairs Bib tap standard of PTMTof any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms |
| 132 | Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia \"D\" type 60 cm long between flanges |
| 133 | Supply and fixing in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms). |
| 134 | Supply and fixing 125mm bore brass CP grating of approved design fixed with white cement complete as directed including taking down old one. |
| 135 | Supply and fixing in repair shower rose chromium plated 120 mmwith or without swirel joints including fixing to steel pipe of 15 mm bore |
| 136 | Material and labour for grinding and polishing of terrazzo floor with machine including wax polishing all as specified and directed by EIC. |
| 137 | All as per item No.136 above but in skirting/dado (grinding/ polishing by hand) |
| 138 | Material and labourfor cleaning the existing tiles joints and filling the tiles hollow joints with white cement including grouting of floor trap surroundings with white cement to the entire satisfaction of the Engr-in-charge. |
| 139 | Material and labourfor cleaning steel windows wire mesh shutters with soap water of size not exceeding 1.5 Sqm each including cleaning scrapping all as specified as directed by Engr-in –charge |
| 140 | Supply and fixing in repair spindle of any size for tap,angle/stop valve all as specified and as directed. |
| 141 | Supply and fixing in repairs Stainless steel Plate rack 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete |
| 142 | Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm includingtaking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed. |
| 143 | Supply and fixing in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed. |
| 144 | Resecuring or easing and adjusting wooden shutters of any description each without taking down |
| 145 | Supply and fixing soft rubber beading size 35 x 4mm fixed with nails or suitable adhesive complete all as specified and directed. |
| 146 | Dismantling of existing unserviceable water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr)complete all as specified |
| 147 | Dismantling of existing unserviceable water tank and removing, (Capacity 250 Ltr and n. exc. 500 Ltr)complete all as specified |
| 148 | Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacityincl tank nipple complete all as specified and directed |
| 149 | Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacityincl tank nipple complete all as specified and directed |
| 150 | Material and labourfor running welding in repair of thickness not exceeding 6mm in any position all as specified and as directed |
| 151 | Material and labourfor repairs to leaking bib tap, pillar tap, stop cock, angle cock and gate valve of 15 & 20 mm dia,flush tankby changing rubber washers, or using M seal, etc as required to rectify the defect all as directed by Engr-in-Charge. |
| 152 | Taking down defective steel doorand repairing hinges,alignment etc. including welding & replacement of any item required for proper functioning and refixing in the same position. |
| 153 | Supply and fixing for 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes). |
