Military Engineer Services-MES has published Repairs / Maintenance To E / M Installations, Dg Sets And Amf Panels And Connected Works. Submission Date for this Tender is 20-06-2022. Diesel Generators Tenders in udaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-06-2022 |
| Sl. No. | Item Description |
| 1 | Supply and mixing of ferric Alum as and when required complete all as specified and directed |
| 2 | Supply and mixing of Bio-Nuts for healthy growth of bacteria in waste water treatment plantsforB.O.Drelatedtreatments as and when required complete all as specified and directed Make : TES (Techno Economic Services) or equivalent |
| 3 | Supply and mixing of liquid chlorine in 50 ltrs containers (containers will be kept in custody of plant staffs and not return to contractor) as and when required complete all as specified and directed |
| 4 | Cleaning of sludgefromsludgebeds & Sump House from sump depth up to 6-8 mtr depth using high pressure sewer suction machineand removal the same to out side defence Land complete all as specified and directed. Note:- Disposal of all sludge at suitable frequency outside the defence land. Contractor is deemed to have identify the area suitable for disposal for sludge. The cost of same shall deemed to have been included in the quoted rates. |
| 5 | Takingout after disconnecting and dismantling electrically and from delivery line sewage sumbersible pumping set 10.0 HP from sump house from depth upto 6-8 mtr Make KSB model KRTU 100 complete from existing raw sewage sump for repair and maintenance and refixing, reconnecting and testing the same after completion of following repair work :- |
| 6 | (a) Cleaning complete pump setand dismantling of submersible motor pumpfor repair all as directed. |
| 7 | (b) Material and Labour for replacement of gasket and "O" ring set- 1 Set |
| 8 | (c) Material and Labour for replacement of existing u/s ball bearing and packing with bearing grease of suitable grade all as directed by Engr in charge.- 1 Set of two |
| 9 | (d) Material and Labour for replacement of existing u/s mechanical seal- 1 Set |
| 10 | (e)Material and Labour for replacement of existing u/s lock nut |
| 11 | (f) Material and Labour for replacement of existing u/s shaft/bearing sleeve(S/S)- 1 No. |
| 12 | (g)Material and Labour for replacement of Oil with oil of grade SAE 40 W- 2 Ltr. |
| 13 | (h)Material and Labour for replacement of existing u/s high Tensile Bolts, LN key type washers etc- 1 Set |
| 14 | (i) Material & Labour for motor re-winding using copper wire etc.complete |
| 15 | (j) Assembling the pump and motor duly greasing all fits of various components and screw connections before mounting. |
| 16 | (k)Material and Labour for replacement of existing u/s oil seal- 1 Set |
| 17 | Material and Labour for taking Out unsv Submersible sewage pumpsetof any capacity , make & depositing the same in MES store yardfrom sump house of depth 10 to 12 meters, including lowering of new supply, installing, testing and commissioningsewage sumbersible pumping set of capacity 10.0 HP three phase 415 Volts, AC coupledmake KSB model KRTU 100 of discharge capacity up to 200 cum/Hr up to head 24 m. Note : Rates are deemed to be including for making flanged joints with new rubber washers and nuts , bolts work and all as directed by Engr-In-Charge |
| 18 | Takingout after disconnecting and dismantling electrically and from delivery line sewage sumbersible pumping set 3.0 HP Make KSB model KRTU 100 complete from existing raw sewage sump for repair and maintenance and refixing, reconnecting and testing the same after completion of following repair work :- |
| 19 | (a) Cleaning complete pump setand dismantling of submersible motor pumpfor repair all as directed. |
| 20 | (b) Material and Labour for replacement of gasket and "O" ring set- 1 Set |
| 21 | (c) Material and Labour for replacement of existing u/s ball bearing and packing with bearing grease of suitable grade all as directed by Engr in charge.- 1 Set of two |
| 22 | (d) Material and Labour for replacement of existing u/s mechanical seal- 1 Set |
| 23 | (e)Material and Labour for replacement of existing u/s lock nut |
| 24 | (f) Material and Labour for replacement of existing u/s shaft/bearing sleeve(S/S)- 1 No. |
| 25 | (g)Material and Labour for replacement of Oil with oil of grade SAE 40 W- 2 Ltr. |
| 26 | (h)Material and Labour for replacement of existing u/s high Tensile Bolts, LN key type washers etc- 1 Set |
| 27 | (i) Material & Labour for motor re-winding using copper wire etc.complete |
| 28 | (j)Assembling the pump and motor duly greasing all fits of various components and screw connections before mounting. |
| 29 | (k) Material and Labour for replacement of existing u/s oil seal- 1 Set |
| 30 | Disconnecting and dismantling from the mounting platform of sewage treatment plant, Air Blower assembly consisting of twin lobe rotary Blower and and motor coupled by V Belt of capacity 15 HP complete of Make (Blower) "EVEREST" and (motor) "USHA" for repair and maintenance and refixing, reconnecting and testing andthe same after completion of following repair work :- |
| 31 | (i) Air Blower Assembly |
| 32 | (a) Cleaning complete twin lobe rotary blower assyand dismantling of blower for repair all as directed. |
| 33 | (b) Material and Labour for replacement of dry bag type suction air filter.- 1 No. |
| 34 | (c) Material and Labour for replacement of existing u/s bearing and packing with bearing grease of Castrol AP-2 or equivalent grade all as directed by Engr in charge.- 2 Set of two |
| 35 | (d) Material and Labour for replacement of existing u/s oil seal- 1 Set |
| 36 | (e)Material and Labour for replacement of Oil with oil of grade SAE 90/SERVO GEAR SUPER 90- 4 Ltr. |
| 37 | (f)Material and Labour for replacement of existing u/s high Tensile Bolts, nuts, washers etc- 1 Set |
| 38 | (g) Setting clearance of rotor timing using feeler gauges and adjustments untill uniform clearance is set all over.- 1 Job |
| 39 | (h) Assembling the blower duly greasing all fits of various components and screw connections before mounting. |
| 40 | (j)Material and Labour for replacement ofexisting u/s V Belt of No. FK 548- 3 Nos. |
| 41 | (k)Material and Labour for replacement ofexisting u/s Pressure gauge of range 0-1 Kg/cm². Make : H Guru/FIBIG/Air Master- 1 Nos. |
| 42 | (ii) Induction Motor AC 415 V 3 Phase 50 Hz |
| 43 | (a) Cleaning complete motor by CTC/Petrol and dismantling of motor for repair all as directed. |
| 44 | (b) Material and Labour for rewinding the coil before cleaning parts by CTC/Petrol and revarnishing winding , ovening etc- 1 Job. |
| 45 | (c) Material and Labour for replacement of existing u/s bearing and packing with bearing grease of suitable grade all as directed by Engr in charge.- 1 Set of two |
| 46 | (d) Assembling the motor duly replacing worn out nut bolts, washers etc. and replacing u/s connection cable lugs- 1 Job |
| 47 | Supply only Bearing Grease in 1 Kg Packing |
| 48 | Carrying out the following different checks of each DG sets 200 KVAof Mahindra make as recommended by manufacture complete all as specified and directed. |
| 49 | (a) Material and labour for repair of DG set by providing gear box to flywheel and alternator to start on AUTO/MANUAL easily |
| 50 | (b) Complete servicing of DG set as per OEM instructions with replacement of lubes and all type of filters reqd at site |
| 51 | (c) Repair of Battery charging system, DG control relay with AMF system complete all as per OEM instructions |
| 52 | Note: Rates ofParts are included for Parts (a,b &c) will be changed/Replacement completely if not working are dameged any within one year of period after completion of Work. |
| 53 | Supply and fixing MCCB 4 Pole 160 Amps 36 KA Breaking Capacity 415V Adjustable type |
| 54 | Supply and fixing MCCB 4 Pole 200 Amps 36 KA Breaking Capacity 415V Adjustable type |
| 55 | Supply and fixing Contactors of 32Amps to 63 Amps415 Volts with auxilliary contact block, timer delay & mechanical interlocking contactor star-delta starter |
| 56 | Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil. |
| 57 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil. |
| 58 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 59 | Taking out from trenches D I pipe 150 mm dia with spigot socket end in existing position and removing from site. |
| 60 | Supply and Laying D I TUBING 150 mm dia spigot socket joint, Class Bmedium grade including all fittings and accessories , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal. |
| 61 | Taking outG I pipe 50 mm dia with flanged end in existing position and removing from site. |
| 62 | Supply and Laying G I TUBING 50 mm diaflanged ends, Class Bmedium grade Pipes including all fittings and accessories, inlength 3 meters withwelded both ends flanfed. |
| 63 | Supply and replace chlorine dosing pump of dosing pressure 3.5 to 4 kg/cm2 with flow rate 0 to 10 lph including all fitting fixture. |
| 64 | Supply and fixing of Auto switch including following features :- a) automatic start the motor b) Protect motor from running in two phase c )Protect motor against single phase d) protect motor against low/high voltage e) Protect motor against reverse running, f) Starting time delay 1minut appx.etc |
| 65 | Material and labour for painting of CI/DI/GI Pipe line any dia with bend and flanges, MS ladder and railing with two coats of synthetic enamel paint of approved quality and colour incl preparation of old painted steel surfaces as directed by Engr - in- charge (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss) |
| 66 | Material and Labour for4 to 7 mm dia conductor connectors consisting of two brass plates and two steel bolts and nuts for 2 conductors of equal or unequal sizes for non-tension connections including treatment of connectors and ASCR conductor with conducting jelly |
| 67 | Material and Labour for10 to 13 mm dia conductor connectors consisting of two brass plates and two steel bolts and nuts for 2 conductors of equal or unequal sizes for non-tension connections including treatment of connectors and ASCR conductor with conducting jelly |
| 68 | Supply and replace synthetic insulating mat of size 2m x 1m x 10mmin MA pannel room at STP |
| 69 | Supply and replace Indicator lamp with suitable size of copper wire in MA panel and DOL Starters |
| 70 | Supply and replace selector switch of suitable size in MA panel and DOL starters at STP and sump house locations |
| 71 | Supply and replace MCB TPN 63 AMPS in MA Panel and LT Panels at Pump house locations and at STP Make :- Havells/L&T |
| 72 | Supply and replace MCB TP 32 AMPS in MA Panel and LT Panels at Pump house locations and at STP Make :- Havells/L&T |
| 73 | Supply and replace MCB TP 16 AMPS in MA Panel and LT Panels at Pump house locations and at STP Make :- Havells/L&T |
| 74 | Supply and replace MCB TP 10 AMPS in MA Panel and LT Panels at Pump house locations and at STP Make :- Havells/L&T |
| 75 | Supply and replace MCB SPN 06 AMPS in MA Panel and LT Panels at Pump house locations and at STP Make :- Havells/L&T |
| 76 | Supply and replace MCB SPN 10 AMPS in MA Panel and LT Panels at Pump house locations and at STP Make :- Havells/L&T |
| 77 | Supply and replace MN thermal overload relay to range 0.2 A to 23 A in MA panel at STP and DOL starters at sump house panel Make :- Havells/L&T |
| 78 | Supply and replacecontrolling relay of suitable size and range as required at MA panel and DOL starters at STP and sump house locations Make :- Havells/L&T |
| 79 | Supply and replace multi function timer in MA panel at STP of suitable size required at site Make :- Havells/L&T |
| 80 | Supply and replace Digital ampere meter suitabel for 3 phase AC in MA panel at STP of suitable size required at site Make :-Havells/L&T |
| 81 | Supply and fixing stainless steel short heavy duty chain in sewage sump motors placement in sump house locations and sewage pump at STP |
| 82 | Supply and fixing in repairs Electronic Controller in AMF Panel ofDG Set capacity 50 KVA and making all necessary connection and programming to make functional of DG Set |
| 83 | Material and Labour for replacement of moulded rectifier unit on existing DG set of capacity 120 Ohms for alternator exciter unit complete all as specified and as directed |
| 84 | Material and Labour for replacement of SMPS based Electronic Battery Charger suitable for 12/24 Volts battery charging system complete as specified and as directed. |
| 85 | Disconnecting of electric main connections from the existing unserviceable motor control panel removing effected parts, cleaning complete to carryout various repair/replacement work and connecting up electically after repair work in and including providing new internal wiring within controll panel board for connecting up of connector/relay/voltmeter with suitable size twisted type PVC insulated complete with bottle neck lugs/thimble and new nuts & bolts if required connection shall be properly bunched, tied and dressed, ferrule markred for proper identification and shall be wrapped with PVC spring type tube near the door hinges complete all as directed by Engr-in-charge |
| 86 | Supply and fixing Star Delta starter MUg-15 with MS sheet( 2 mm Thick) enclosure suitable for - 10 HP Submersible motor in existing location including making connection with PVC insulated 1100 volts grade ,three core , multistranded copper conductorof size 6.0 sq mm with voltmeter,ampere meter, Auto Switch,Single Phase Preventor & Indicating Lamp Led Type for Phase Indication (Red Yellow 7 Blue) ,all as directed and specified . Make :- L&T/siemens or equivalent |
| 87 | Material and Labour for taking Out unsv monoblock filter feed motor pumpset of any capacity , make & depositing the same in MES store yard from site, includingsupply ,installing,testing and commissioningfilter feed pumpset along with motor of capacity 10HP three phase 415 Volts ,AC coupledmake KSBof discharge capacity up to 200 cum/Hr up to head 12 m. Note : Rates are deemed to be including for making flanged joints with new rubber washers and nuts , bolts work and all as directed by Engr-In-Charge |
| 88 | Supply and replace PVC insulated and sheated 1100 grade,flat type Submersible Cable 3 core,multistranded,Copper conductor of Size 4.0 Sqmm |
| 89 | Material and labour for painting of CI Pipe line any dia with bend and flanges, MS ladder and railing,Panels etc with two coats of synthetic enamel paint of approved quality and colour incl preparation of old painted steel surfaces as directed by Engr - in- charge upto 15 mtr ht from GL. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss) |
| 90 | Supply and replace PVC insulated and sheated 1100 grade,flat type Submersible Cable 3 core, multistranded, Copper conductor of Size 6.0 Sqmm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
