Chennai Metropolitan Development Authority-CMDA has published Providing Interior Partition Work Providing Interior Partition And Furniture Works False Ceiling Civil Electrical Voice Data Fire Fighting And Detection Air Condition Wifi Arrangements For Setting Up Of Master Plan Unit And Cumta Of Cmda At 5Th Floor West. Submission Date for this Tender is 20-06-2022. Air Conditioner Tenders in egmore Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Removing the existing false ceiling and disposing the same including hardware, labour cost, transportation, fuel, loading & unloading, etc. complete as per drawing and as directed by the Engineer in-charge |
| 3 | Removing the existing Aluminum Partitionand disposing the same including hardware, labour cost, transportation, loading & unloading, fuel etc.complete, as directed by the Engineer in-charge |
| 4 | Removing the existing wooden Partitionincluding hardware and disposing the same, rate includes labour cost, transportation, loading & unloading, fuel, etc. complete complete, as directed by the Engineer in-charge |
| 5 | Providing pre constructionanti-termite treatment all round the floor levelincluding guarantee for ten yearsfrom the date of completeion of the work, as per I.S.Code 6313(part II) - 1981.- (As per manufactures spec only), rate includes all materials, labour cost, transporation, loading & unloading, fuel, etc, complete |
| 6 | Vinyl Flooring: Providing and fixing PVC sheet flooring of thickness of 2mm with the size of 2m x 20m . The product shall be homogeneous and single layered with PUR range. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with “Diamond 10” technology, Plasticizers without DOP, Urethane, color pigments and filler calendared to form a sheet. Color and pattern details shall be dispersed throughout the thickness of the wear layer. It should conform to group "T" wear resistance as per EN 649, Clean Room certified with class "A" as per ASTMF5100, Flammability resistance of class Bfl-s1 as per GB8624-2006, Dynamic coefficient of friction of class DS as per EN 13893, Thermal Resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as per DIN 51130, Residual indentation of 0.03mm as per GB/T 4085-2005, Color fastness rating of =6 as per ISO 105-B02, total weight being 3.3kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behavior, resistance to bacteria, resistance to chemical, resistance to staining, suitability to castor chair. The product shall be Floor Score certified with no SVHC content published by European Chemicals Agency (REACH). Product shall contribute to LEED points under Indoor environmental quality category. Equivalent to Armstrong "Medintech Plus”. The Skirting quantity has been included in the flooring Quantity. NOTE : (inclusive of all Materials, Accessories like Welding Rods, Cove Formers, Cutting Wastages provision, Self Leveling upto 3 mm height and Seam-welded Installation, labour chrages, loading & unloading, etc. complete |
| 7 | Providing and fixing half height wooden partition with Fixed Glass made of frame work using Aluminum Sections of size 2 " x 2"fixed in the Floor Level, the framework shall be placed in vertical & Horizontal directions at a spacing of 2"-0" c/c as per site condition . The frame work should coveredwith 9mm tk BWP ply with CP metal screws on both sides of the partition, It shall be finished with 1mm laminate of approved bonding material. The Pin-up board/writing board or 8mm frosted glass shall be fixed in the partition of 1"0" ht,(The Glass placed in 3"6"from FFL till 4"6") as per client"s requirements. The glass to be fixed with wooden beading on both sides of the glass. The wooden trim shall be fixed on top of the glass of size 3.5" X 1" should be fixed in top & side of the partition finishing with Paint, rate inlcudes all materials, labour charges, transporation, loading & unloading, fuel, etc., complete |
| 8 | Full Height Wooden Partition with Fixed Glass: Providing and fixing Full height wooden partition with Fixed Glass made of frame work using Aluminum Sections of size 2 " x 2"fixed in the Roof Ceiling and Floor Level , the frame work shall be placed in vertical & Horizontal directions at a spacing of 2"-0" c/c as per site condition . The frame work should coveredwith 9mm tk BWP ply with CP metal screws on both sides of the partition, It shall be finished with 1mm laminate of approved bonding material. The 8mm thick clear glass shall be fixed in the partition of 2"6" ht, (The Glass placed in 4"6" from FFL till 7"0". Wooden Partition from 7"0" upto False Ceiling level). The glass to be fixed with wooden beading on both sides of the glass on all-around the glass finished with Painting,rates includes all materilas, labour charges, transportation, loading & unloading, fuel, etc. NOTE : Measurements to be taken upto false ceiling level only. The frame work above false ceiling level will not be considered for measurement and will not be paid extra |
| 9 | Wooden paneling in Column : Providing and Fixing of wooden paneling with framework in the gap of plus column with 19mm tk BWP ply and supports should be taken from existing column of plumb, Line & Level. The outer frame work shall be covered with 12mm thkBWP ply and finished with 1mm laminate of approved brand and colour etc., complete and as per direction of Engineer in-charge, rate includes all materials, labour charges, transportation, loading & unloading charges, etc. |
| 10 | Joinery with Frame (Doors) : Providing and fixing of wooden Frame with Shutter of made 1st class Teak wood frame of size 3.5"x 2.5" and shutter made of 30mm thick solidcore BWP Flush shutter fixed on the frame with Hinges and wooden beading of size 1.5"x1/4" should fixed in the shutter all around edges.The shutter having cutout forvision panel of size 5" x 1" - 1 no. and 4mm clear glass should fixed in the cutout with teak wooden beading both sides of the glass. It shall be finished with 1mm tk laminate on both sides of the shutter of approved make and colour with necessary hardwares . ( i.e.. Hinges - 5"x1" - 3Nos , lock - 1no, S.S Handle "H" Type 1" dia -1"0" ht , door closer dorma Make - 1001 XLC series - 1no etc.) The wooden frame and wooden beading shall be finished with melamine polishing, Rate includes all materials, labour chrages, transportation, loading & unloading charges, etc. complete. |
| 11 | Glass Door with Over Head Panel : Providing and fixing of Style-less Glass doors as per Drawing with Dorma XLC4001 package WithS.S Patch fitting of approved make, heavy duty floor spring, floor lock, lock plate, S.S handle , etc. Glass shall be 12mm thick toughened glass. Floor spring weight capacity of 120Kgs and opening angle of 120 degree and stop angle of 90 degree.Rate shall include for transport charges, handling, loading and unloading, testing & commissioning of hardware, installation of glass, protection until handover, etc complete as per direction of site Engineer |
| 12 | Fixed & Top Hung Windows : Supply and fixing of Aluminum color anodized using standard sections top hung window ventilator using standard sections of ‘H’ section size 34mm x 44mm outer frame section No 2082 (0.554kg/m) with shutter ‘Z’ sections size 44mm x 34mm section No 4124 (0.494kg/m)mullion sections size 47mm x 34mm section No 9139 (0.810kg/m) with window clips 31mm x 17mm section No 4125 (0.184kg/m) 5mm clear toughened glasses SS Imax window handle with accessories.The rateincludes labour charges, all materials, all accessories & Hardware fixtures, transportation, loading & unloading,etc. complete. |
| 13 | Fixed Glazing with toughened glass (With Frame) : Supply and Erection of Aluminum fixed glazing using anodized 44M window series outer frame with clips and EPDM gaskets glass using 12mm clear temper glass with exterior grade silicon sealant. Rate shall includes for all materials, transport charges, handling, loading and unloading, testing & commissioning of hardware, installation of glass, protection until handover, etc. complete. |
| 14 | Gypboard Ceiling: Supplying and erecting the false ceiling with gypboard suspended to the celing with GI metal Galvanized sections of EXPERT 120GSM and suspenders as per the manufacturers specipication and procedureas approved by architect of G.I. perimeter channels of size 0.40 thick having one flange of 20mm and another flange of 30mm and a web of 28mm along with perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm center"s. The suspending G.I.intermediate channels of size 45mm, 0.7mm thick with two flanges of 15mm each from the soffite at 1220mm center"s with ceiling angle of width 25mm x 10mm x 0.35 thick fixed to soffite with G.I. cleat and steel expansion fasteners at every 610mm c/c. Ceiling sections of 0.30mm thickness having knurled web of 80mm and two flanges of 26mm each with lips of dia 2.64mm are then fixed to intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm center"s. 12.5mm tapered edge Gypboard is then screw fixed to ceiling section with 25mm drywall screws driver or drilling machine with suitable attachment. The boards are to be joined and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape, Complete as per drawing. Rate includes all materials, labour charges, wastages , cleaning, necessary lead and lifting, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, surface cleaning and as complete with all respects complying with relevant standard specification. |
| 15 | Grid Ceiling : Providing and fixing tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x3600mm, cross "T" of size 24x25x0.3x1200mm, secondary cross "T" of size 24x25x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. 24x25x0.3x1200mm cross T {GI(IS513)YS-280Mpa,FinishGalvanised 120GSM(IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS- 280Mpa,Finish-Galvanised 120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally 12.5 mm thick Fultone Tile, fully Perforated Gypsum unpainted tile of size 595x595 mm, having perforation of 9.7x9.7 mm square shape at 9.7 mm c/c with center borders of 48mm and the side borders of 30mm, backed with non woven tissue, is placed in grid. For NRC value - 0.55 |
| 16 | Wooden door in ceiling ( Trap Door ) : P/Fixing of wooden door in ceiling. The ply frame to be made in 19mm BWP ply of 1.5" tk ( 19mm+19mm ) of size 4"x1" should fixed with vertical wooden supports of proper line and level, The Wooden support should fixed directly on the R.C.CRoof with equal spacing. The Trap door shutter should made with 12mm BWP ply with two equal shutter placed over the frame work. The teak wooden beading of size 2"x1/4" shall be fixed in the frame work exposed edges and finished with polishing, The shutter and Frame exposed area finished with 1mm laminate and inside area to be in 0.8mm laminate, the rate includes necessary hardwares, all materials, labour charges, transportation, loading & unloading, etc. complete |
| 17 | Repainting the walls and ceilings with two coat of first class quality Plastic Emulsion Paint of approved colour over a priming coat including thorough scrapping clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of paris, putty wherever necessary required and neat finishing etc., labour charges, loading & unloading, transporation, etc. complete complying with standard specification and as directed by the departmental officers |
| 18 | Supplying and fixing Storage unit with openable shutters and Shelves With out back Ply. The storage unit made of 19mm BWP ply for all vertical and horizontal supports fixed in the wall at 1"0" ht from FFL and 12mm BWP ply for Shelves. It shall be finished with 1mm laminate for the exposed surface and inside surface shall be finished with 8mm laminate. The plywood exposed edges shall be fixed with wooden beading of size 1"x6mm and finished with melamine polish, The shutter compraising 2nos of crank Hinges, S.S Louver - 6"x4" - 1no, including all hardware"s, materials, labour achrges, loading & unloading, transportation,etc. (Storage unit Size :4"0" x 2"0" x 8"0" for 1 No) |
| 19 | Providing Granolithic floor finish 50mm thick with PCC 1:2:4 (One of cement two of sand and four of aggregate) using 10 to 12mm thick HGB jelly and river sand and including rubbing the top surface smoothly thread lining, if found necessary and curing etc., rate includes all materials, labour charges, transportation, loading & unloading, fuel charges, etc. complete complying with standard specification and as directed by the Departmental officer. |
| 20 | Supply & Fixing of Fire rated metal single / Double leaf door with approved powder coated frame (Grey color frame & Grey anodized Hardware as per details). Fabricating and fixing of single leaf / double leaffire rated door with 2 hours fire rating with acoustical as per details.Frame : 100mm x 60mm Fire rated metal jamb formed of 1.6mm thk G.I Sheet finished with fire rated paint of approved shade as per IS277 as per details.Shutter : 48mm thk Metal shutter formed of Non-Combustible Fire Resistant Board with fire seal finished with 1mm thk G.I Sheet and sheet surface to be finished with fire rated automotive paint of approved shade. Vision panel : Formed of 11mm Thick Saint Gobain Contraflam Door Lite EW120 Clear Toughened Interlayered 2 hrs fire rated clear glass fixed with metal beading from inside as per details. Fire rated Hardwares : Hinges, Lock set, Door Handle, Door Closer with hold open,Door Stopper,Drop down seal with acoustical seal, etc are should be got approved by the Executive Engineer. Rate includes 3mm undercut & nail groove with all hardwares. To have necessary fire sealant all around the door frame (In-between the door frame & partition). Rateincludes necessary MS support from true ceiling and wall / Partitions for door frame fixing as per site conditions, Fire rated single leaf metal door of size 1200mm x 2400mm finished with fire rated automotive paint & fixed with approved powder coated door frame (With vision panel). Rate includes all materials, labour charges, transportation, loading & unloading charegs, etc. complete |
| 21 | Providing and fixing Roller blinds block out fabric as per drawing of Vista/Hunter Doughlus.FABRICS: Inherently anti-static, flame retardant, fade and stain resistant, light filtering, room darkening, and blackout fabrics providing 0% - 14% openness factors. Fabric weights to range between 6.00 oz/sq.yd. - 20.70 oz/sq.yd., containing fiberglass, PVC, polyester, acrylic, vinyl laminates, cotton, and vinyl coatings. Finish selected by architect from manufacturer"s available contract colors. ROLLER TUBE: Circular-shaped aluminum tube extruded from alloy and temper 6063 T-6. 2" outside diameter extruded tube to have a .063" wall thickness (2.5" outside diameter to have a .079" wall thickness). Heavily reinforced with minimum six internal ribs providing additional tensile strength and allows for secure placement of clutch and end plug. HEAVY DUTY TUBE BEARING PLUG: Die cast metal and reinforced idler assembly containing spring loaded end plug with positive locking wheel allows for up to 7/8" adjustment and provides for a secure installation and removal of shade. Locking tube bearing plug contains minimum 6 ribs and inserted a minimum of 2-3/8" into roller tube. Rate includes all materials, labour charges, transporation, loading & unloading charges, etc. complete as directed by the departmetnal officers. |
| 22 | Supplying and fixing of 3m frosted Film fixing over the glazed surfaces of doors and partitions as per drawing3M window films reject heat and block nearly all of the sun’s harmful ultraviolet rays, 3M window films resist peeling, bubbling, scratching and abrasion and are backed by warranties that are among the most comprehensive available.They reject up to 97% of the sun’s infrared light and block 99.9% of th sun’s harmful ultraviolet rays. It should comply ASTM International (ASTM). Rate includes all materials, labour charges, transportation, loading & unloading etc, complete in all respects |
| 23 | Supplying and fixing Counter unit with Granite Top , openable shutters and drawers using 19mm BWP ply for all vertical and horizontal supports and 12mm BWP ply for drawers and 6mm BWP ply for drawer bottom and rear side. It shall be finished with 1mm laminate for both inside and outside of the unit, The shutter and drawer edges shall be fixed with teakwood molding and finished with painting. The top shall be finished with 20mm granite with molding/ Edge polishing, including all hardwares & materials, labour charges, transportation, loading & unloading, etc. complete as directed by the departmental officers. |
| 24 | Wall Cabinet unit (1"3" width) : Supplying and fixing of Over head storage unit with Shelves, openable shutters, The outer Frames using 19mm B.W.P ply for all vertical and horizontal supports and shutters shall be used. It shall be finished with 1mm laminate for inside and outside, The shutter edges shall be fixed Teak wooden beading finished with painting, The shelves of using 12mm BWP ply and finished with 1mm laminate both sides, The 5mm clear glass shall be fixed in the shutter as shown in the drg, including all hardwares like S.S handle, Hinges, other required materials, labour charges, transportation, loading & unloading chrages, etc. complete |
| 25 | Supplying and fixing of Floor storage unit with Shelves, openable shutters, The outer Frames of using 19mm commercial ply for all vertical and horizontal supports and shutters shall be used. It shall be finished with 1mm laminate for inside and outside, The shutter edges shall be fixed Teak wooden beading finished with painting, The shelves of using 12mm ply and finished with 1mm laminate both sides including all hardwares & other required materials, labour charges, transportation, loading & unloading charges, etc. complete in all respects. |
| 26 | Renovation of Toilet Block |
| 27 | Dismantling, removing and carefully stacking roughening the surface, etc. complete complying with standard specification and as directed by the departmental officers |
| 28 | Dismantling the brick masonry in cement mortar walls under 3m high |
| 29 | Floor finish and dadooing walls in cement mortar with Mosaic tiles / Glazed tiles / Cuddapah slabs, etc. |
| 30 | Reinforced Cement Concrete |
| 31 | Sanitary Fittings Removal: Removing the existing Sanitary Fitting, including hardware , labour cost, carting away and clearing off the debris complete |
| 32 | Waterproofing Work with FRP : Prepare surface and provide Waterproof with Fibre reinforce Plastic , using Resin coating with Chopped Strand Fibre Matt , The Existing surface to be cleaned upto the RCC slab and floor to be wash with acid, andfibre mesh shall lied in the following sequenc for floor and wall upto 1"6" high Step 1:- the Resin coating should be applied on theRCC slab Step 2 :-fibre mesh ( 1sqm - 450grams ) as the second layer shall be placed over resin Step 3: - the Resin coating should be applied on theRCC slab Step 4 :-fibre mesh ( 1sqm - 300grams ) as the second layer shall be placed over resin The rate should include debriscleaning , Wastage , lead and lift and all Taxes. The rate should alsoinclude protection plastering of 20 mm thick using CM 1:5 over the FRP, as per drawing |
| 33 | Brick partition wall in CM 1:3 (one part of cement and three parts of sand) 11.50 cm thickness using second class chamber burnt bricks of size 9"x4 3/8"x2 3/4" including both side plastering and using hoop iron with reinforcement if found necessary etc., complete |
| 34 | Providing and laying the Reinforced cement concrete 1:2:4 (One cement five sand and four broken Machine crushed stone jelly) using 20mm gauge hard broken granite jelly for all RCC works such as slabs, beams, footings, staircase waist slabs, steps, landing beams fins, boxing, vertical louver, drops, window sill slabs projection and other similar works including laying curing etc., complete complying with standard specification and as directed by the departmental officers, rate includes all materials, labour charges, loading & unloading, transportation, etc. |
| 35 | Brick Jelly Concrete : Providing and laying plain cement concrete broken brick jelly 1:2:4( 1 cement : 2 sand : 4 brick jelly 20mm ) for required thickness in Sunken floors & walls of toilets . The rate shouldinclude curing, and cleaning the debrisway from the site, etc. all complete. |
| 36 | Ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs etc with C.M1:3 (One cement and three sand) 10 mm thick including hacking the surfaces and providing necessary C.M nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the Departmental Officers. |
| 37 | Providing & fixing of CPVC pipes conforming to ASTM standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting, jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc.making holes,chasing, including laying of the water supply lines in the grooves of required width and depth in the grooves in walls and RCC slabs, making good the walls and bores in CC or CM 1:3 as applicable clearing the debris, grouting of concealed pipeswith cement mortar 1:3 ratio, MS hooks for fixing pipes and making good the walls and floors. |
| 38 | 20mm dia. CPVC Pipes |
| 39 | 25mm dia. CPVC pipes |
| 40 | 40mm dia. CPVC Pipes |
| 41 | Providing, fixing,testing and commissioning of PVC soil, waste and vent pipe confirmingto IS 13592 of SWR quality 6 kg / sq.cm pressure rated or Type - B self-fit/pasting type including all fittings, like Bends, Tees, Elbows, Collars, junction, offsets, access pipes, jointing with solvent cement followed by application of leak proof adhesive like FRP paste & laid below floors inside false ceiling area of the toilets, in the slab of kitchen and utility to the required slope including making good the floor / slab / bores with CM 1:3 or cement concrete as applicable, curing etc., complete. |
| 42 | 75mm dia. Pipes |
| 43 | 110mm dia. Pipes |
| 44 | Providing, fixing, testing and commissioning of PVC floor trap of self cleansing design moulded or fabricated, if not available in size mentioned below, with or without vent armjointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including encasing all round fixing the floor trap in cement concrete1:2:4 ratio of size 300 x 300 mm x 250 mm height (approx) and making good the floors. |
| 45 | Providing, fixing, testing and commissioning of PVC urinal trap of self cleansing design moulded or fabricated, if not available in size mentioned below, with or without vent armjointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including encasing all round fixing the floor trap in cement concrete1:2:4 ratio of size 300 x 300 mm x 250 mm height (approx) and making good the floors. |
| 46 | Providing and fixing CPgrating of 6mm thick with rim including setting in floor with white cement mortar and making good the floor |
| 47 | Providing, fixing testing and commissioning ofBrass ball valves with knob operated with all necessary unions and nipple collars and tested to 10kg / sq.cm Pressure. |
| 48 | 25mm dia |
| 49 | 32mm dia. |
| 50 | 40mm dia. |
| 51 | Supply of Glazed stoneware Gully trap of size 150 x 100 mm with 100 mm outlet, CI grating to suit the size of the gully mouth, CI cover & frame of 300 x 300 mm clear opening of 7 kg weight, complete. Laying in position the above glazed stone ware gully trap including embedding trap in cement concrete 1:3:6 and constructing chamber of size 300 x 300 mm (inside clear) in brick masonry, 15 mm thick plaster with cement mortar (1:3) on both internal and external surfaces, inside finished with floating coat of neat cement. Fixing C.I frame and cover 300 x 300 mm (clear opening) x 7 kgs weight, cover painted with 2 coats of anti-corrosive black bitumastic paint etc., complete. The work shall include necessary excavation and backfilling. |
| 52 | Repaving the floor with Design Ceramic tilesof approved quality, colour and design joint free of size 305x 305 x 6mm thick of approved quality and colour in all floor over a base layer of cement mortar 1:3 (one cement three Sand) 20mm thick and laid strength alignment and pointed neatly with colour cement at the rate of 0.40Kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specification and as directed by the departmental officers. The colour and quality of tiles should be got approved by the Executive Engineer before use on work. |
| 53 | Toilet Cubicle (BESCO CUBICLE ZMS SS 2003MM) : Providing and fixing of Toilet cubicle,Thickness of Compact Laminate 12mm, Color of HPL Boards: Single Standard Compact Color. THIS QUOTE WITH SS 304 FOOT SLIDING LATCH WITH INDICATOR (CORONA SAFETY).Size of Cubicle : As per Drawing (W) X 1550mm (D) X 2003mm (H) Door Size : 1750mm (H) x 600mm (W).Divider Size : 1775mm (H) Overall Height Of Cubicle : 2003mm (Including bottom Gap of 150mm) Accessories: Standard - Merino Make Aluminum, Stainless Steel - 304 Grade accessories) a) Aluminum "U" Channel b) Aluminum "F" Channel (Only Corner Unit) c) Aluminum Door Stopper Channel d) Aluminum Top Rail e) SS Coat Hook f) SS Privacy Thumb turn c/w Occupancy Indicator g) SS Door Knob h) SS Spring Loaded Butt Hinges with Cover i) SS Adjustable Foot 316 Grade j) Rubber Door Stopper Lining k) S.S.Screws 304 G & P.V.C Wall Plugs SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438. |
| 54 | Supply, installation, fixingtesting and commissioning of glazed white colourVitreous Chinawall mounted water closet (constallation with concealed "P" trap), fischer bolts with CP bolts / nuts and with concealed flush Tank dual push button, solid plastic seat and lid with heavy duty CP hinges and rubber buffers and flap etc. The works shall include running the Soil pipe in the false ceiling area. |
| 55 | Supplying and fixing in position Indian water closet Oriya type of size 580x440mm white glazed earthen ware of approved quality with ‘P’ trap or ‘S’ trap conforming to IS: 2556-part XII with sand cushion and forming flooring all-round the closet using 40mm broken brick jelly in lime concrete 1:2:5(one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, reinforced cement concrete roof/ floor slab and making good the dismantled portion to original condition without leakage etc. complete complying with standard specification and as directed by the departmental officers (The water closet should be got approved by the Executive Engineer before use on work.) |
| 56 | Supply,installation, fixing, testing and commissioning of glazed White colourvitreous china Oval wash basin counter type (granite/ marble counter)with CI / MSbrackets, 15mm dia CP pillar cock(basin mounted), 32mm dia CP waste coupling with plug and chain,32mm dia CP brass bottle trap, CP cold watersupply connecting pipe, one nos of 15mm dia CP angle stop cock forcold watersupply line with wall flange etc., The works shall include cutting in walls and making good the walls & floors. Size of wash basin 50 x 45cm.(Granite / Marble counter will be installed by other agency) |
| 57 | Supply, installation , fixing,testing and commissioning of glazed white colour vitreous china large flat back lipped urinals of size 61cm x 40cm x 38cm,including CP flush pipe with CP spreaders, 32mm dia CP brass doom type bottle trap, etc., complete including cutting & making good the walls & floors. |
| 58 | Dadooing the walls with 300 x 450 8mm wall tile of johnson make of best approved quality and colour in all shade of the glazed tiles in all floor over a base layer in cement mortar 1:2 10mm thick ans laid in situ true alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 to suit the colour of the tiles fixed in position without any air gap in the tiles neatly etc., complete complying with standard specification and as directed by the departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work |
| 59 | Providing and fixing of urinal divider, using 12mm thick HPL board of approved color and shape fixing with necessary hardwires clamps bolt nut anchor fasteners etc. size 1200x500mm |
| 60 | Supplying and fixing in position of reputed make Pillar cock confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approvedby the Executive Engineer before use on work. |
| 61 | Supplying and fixing in position of reputed make Angle cock with braided hose confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary. |
| 62 | Supplying and fixing in position of reputed make Bottle trap confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approvedby the Executive Engineer before use on work. |
| 63 | Supplying, fixing,testing and commissioning of best quality and approved make stainless steel pantry sink with single bowl and drain board, made of 18 gauge sheet 40mm dia CP waste coupling, 50mm PVC waste pipe etc, complete. |
| 64 | Supplying and fixing in position of reputed make CP sink cock confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approvedby the Executive Engineer before use on work. |
| 65 | Supplying and fixing in position of reputed make Short body Bib cock confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approvedby the Executive Engineer before use on work. |
| 66 | Supplying and fixing in position of 2 in 1 bib cock (15mm Angle Valve cum Long body Tap) confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approvedby the Executive Engineer before use on work. |
| 67 | Supplying and Fixing of Health Faucet set for the European Water Closet in the Toilets including labour charegs, transportation, loading & unloading, etc. |
| 68 | Supplying and fixing in position of Auto closing urinal stop cock confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approvedby the Executive Engineer before use on work. |
| 69 | Supply, installation and fixingtesting and commissioning of Coat Hook, including all materials, labour charges, transportation, loading & unloading, etc. |
| 70 | Supply , installation and fixingtesting and commissioning of Toilet Paper Holder including all materials, labour charges, transportation, loading & unloading, etc. |
| 71 | Supply , installation and fixingtesting and commissioning of Towel ring, including all materials, labour charges, transportation, loading & unloading, etc. |
| 72 | Supply , installation and fixingtesting and commissioning of Grab bar, including all materials, labour charges, transportation, loading & unloading, etc. |
| 73 | Supply and Fixing in position machine water cut & machine polished 20mm thick G20 granite forCounter topwith the colour, quality and pattern of the granite with Half / Full rounded noshing approved by the architect. The granite selected should have uniformity in colour, free from cracks, fissures and flakes, with straight edges and perfect corners .The granite shall be laid over minimun 20mm thick cement mortar 1:3 ( 1part of cement and 3 parts of coarse sand ) and joints shall be pointed in the material cement based polymer grout with polished surface of the stone slab shall be finished with sealer coats as recommened by laticrete /bal endura or approved equivalent make,the rate to be includingcuring, cleaning and finishingin all respects , all material and labour Charges , Wastage and all Taxeslead and lift and debris cleaning all Complete as described in the specification, drawings and as approved by the architect in all Toilets. |
| 74 | Repainting the walls and ceilings with two coat of first class quality Plastic Emulsion Paint of approved colour over a priming coat including thorough scrapping clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of paris, putty wherever necessary required and neat finishing etc., complete complying with standard specification and as directed by the departmental officers |
| 75 | Fire Fighting Arrangements |
| 76 | Above Ground piping - Supply, erection, testing and installation of MS PIPES "C" CLASS conforming to IS 3589 for 200NB & above and IS 1239 for 25NB to 150 NB including cutting the pipes to correct length, providing and welding flanges to pipe, etc as per specifications (including heavy class forged fittings of IS standards) of the following diameters. Rate shall be inclusive of 1 coat Zinc chromate primer and 2 coats red enamel paint as per Fire authorities requirement. Cost of Steel supports & threaded rod support for piping (like angles, channels, clamps, tie rods, brackets, nuts and bolts as per details given in the drawings) Vendor to consider Socket welded fittings up to 50 mm dia and Butt weld type for 65 mm dia & above (coupling, elbow, reducer,equal Tee , reducing tee and end cap etc. ) |
| 77 | 150 NB |
| 78 | 100 NB |
| 79 | 80 NB |
| 80 | 65 NB |
| 81 | 50 NB |
| 82 | 40 NB |
| 83 | 32 NB |
| 84 | 25 NB |
| 85 | Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 20)/ IS :13039 slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. |
| 86 | 150 NB |
| 87 | 50 NB |
| 88 | Supply and installation of Pendent Sprinkler head with the following temperature rating & respond, universal deflector, chromium finish as per specifications. Temperature Rating: 68°C K-80 standard respond with accessories. |
| 89 | Supply and installation of Upright Sprinkler head with the following temperature rating & respond, universal deflector, chromium finish as per specifications. Temperature Rating: 68°C K-80 standard respond with accessories. |
| 90 | Supply, Installation, Testing & Commissioning of Two Piece adjustable Roset Plates, MS powder coated, colour as per client approved |
| 91 | Stainless steel corrugated flexible pipe(hose) for dropping sprinklers below false ceiling, pipe shall be UL Listed, 16 bar pressure rating and 1000 mm long 25 mm dia with union / reducer collar, clamps etc. as required. (BRAIDED) |
| 92 | Supplying & installing of approved make of 150NB flow switches (flow sensors) suitable to be fixed directly on line of the following diameters, with 1 NO & 1 NC potential free contacts |
| 93 | Supply, Installation, Testing & Commissioning of 25mm Ball valve with sight glass and necessary nipple & other fittings |
| 94 | Supply, Installation, Testing & Commissioning of 25mm Ball valve with necessary nipple & other fittings |
| 95 | Test Array Arrangement for pumpset with Dial type pressure gauge & valves for pipes and fittings etc. |
| 96 | Supply and installation of ABC type portable fire extinguishers of 4 Kg capacity Upright type ,confirming to IS 13849,15683. |
| 97 | Electrical works |
| 98 | Providing Data system |
| 99 | Supplying,erecting,connecting and commissioning of Cisco CBS350-28 28-Port 10/100/1000 24 Port switch with 4 SFP uplink ports Gigabit Managed Switch including 1 Year Advance replacement support and all other accessories required for Erection in all aspects should be included in the Offer. ACTIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 100 | Supplying, erecting, connecting and commissioning of Cisco 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM and all other accessories required for Erection in all aspects should be included in the Offer. ACTIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 101 | Supplying, erecting, connecting and commissioning of 24Port Cat 6, Angular Unloaded Jack Panel PASSIVE COMPONENTS FOR DATA,rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 102 | Supplying, erecting, connecting and commissioning of Cat 6, RJ 45 Information Outlets at Jack panel end. PASSIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 103 | Supplying, erecting, connecting and commissioning of Cat 6, 7" Lockable Type Patch Chord at Rack Side. PASSIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 104 | Supplying, erecting, connecting and commissioning of Cat 6, 7" Lockable Type Patch Chord at Field Side. PASSIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 105 | Supplying, erecting, connecting and commissioning of Cat 6, RJ 45 Information Outlets at Field Side. PASSIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 106 | Supplying and laying the Cat 6 Giga speed unshielded twisted pair cable with 23 AWG solid copper conductors in already laid PVC Conduits at Field Side. PASSIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 107 | Termination of Cat 6 Data Cable at both the ends (Information Outlet and Jack Panel End). PASSIVE COMPONENTS FOR DATA, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 108 | Supplying, fixing of Face Plate - Quad FACE PLATES, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 109 | Supplying, fixing of Face Plate - Dual FACE PLATES, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 110 | Supplying, fixing of Face Plate - Single FACE PLATES,rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 111 | Supplying, fixing of Face Plate - Dummy plates FACE PLATES, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 112 | Supplying, erecting, connecting and commissioning of 42U Rack Frame/800X800/Steel/NRS/CKD Assembled/Casters Type 3/Black, Levellers,19" Adopter kit /42U/Loops/ Black, Cable Basket/ 42U/ 400/ Black and 2Nos Perforated Door/ 42/400/ Convex/NRS/Black, Perforated Door/ 42U/400/Flat/NRS/Black, Side Panels/ 800/42U/Vented/NRS/Black, Swing Handle /Mechanical Lock / Single Point / Common Key/Die Cast Metal, Server/IT Rack mount power distribution unit, 1Ph, 230V, 32A, 50/60Hz, Zero U standard with 12 X Indian Round Pin 5/15A, 16A MCB X 2 Circuits- PDU Rating 7.3KVA/Bottom feed-3Mt/ Black/ Inlet Plug Not Installed and 5Nos Mounting Hardware-CR (Pack of 20) and all other accessories required for Erection in all aspects should be included in the Offer |
| 113 | Supply Installation, Testing, Commissioning and documentation with test report - Fluke Meter should be calibratedDTX5000 - manufactures certification with Product warranty - Specify the No of Years |
| 114 | Preparation of "As Built Drawings" and submission of 3 Sets of hard copies and 1 Set of soft copy for DATA network system, after completion of work. |
| 115 | Providing Wi-Fi system |
| 116 | Supplying, erecting, connecting and commissioning of D-Link 8-Port 10/100/1000 switch with 2Copper Uplink Ports Gigabit Managed POE Switch and all other accessories required for Erection in all aspects should be included in the Offer. ACTIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 117 | Supplying, erecting, connecting and commissioning of D-Link AP and all other accessories required for Erection in all aspects should be included in the Offer. ACTIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 118 | Supplying, erecting, connecting and commissioning of 24Port Cat 6A, Unloaded Jack Panel. PASSIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 119 | Supplying, erecting, connecting and commissioning of Cat 6A, RJ 45 Information Outlets at Jack panel end. PASSIVE COMPONENTS FOR WI-FI SYSTEM,rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 120 | Supplying, erecting, connecting and commissioning of Cat 6A, 7" Lockable Type Patch Chord at Rack Side. PASSIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 121 | Supplying, erecting, connecting and commissioning of Cat 6A, 7" Lockable Type Patch Chord at Field Side.PASSIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 122 | Supplying, erecting, connecting and commissioning of Cat 6A, RJ 45 Information Outlets including 2Module Box at Field Side and all other accessories required for Erection in all aspects should be included in the Offer. PASSIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 123 | Supplying and laying the Cat 6A Giga speed unshielded twisted pair cable with 23 AWG solid copper conductors in already laid PVC Conduits at Field Side PASSIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 124 | Termination of Cat 6A Cable at both the ends (Information Outlet and Jack Panel End) PASSIVE COMPONENTS FOR WI-FI SYSTEM, rate includes all materials, laburs charges, loading & unloading, transportation charges etc., as directed by the departmental officers |
| 125 | Testing and Commissioning of Voice data and wi-fi system, rate includes labour charges, etc. as directed by the departmental officers |
| 126 | Preparation of "As Built Drawings" and submission of 3 Sets of hard copies and 1 Set of soft copy for Wi-Fi network system (After completion of work) |
| 127 | Providing Voice system |
| 128 | Supply & fixing ofKrone Connector (100 + 100 pair) type Telephone Tag Blockin 16Gauge Thick sheet steel enclosure at near EPABX System and Entrance Gate of Administrative Office to be fix flush with the wall and all other accessories required for Erection in all aspects should be included in the Offer. PASSIVE COMPONENTS FOR VOICE,rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 129 | Supplying & laying of 50Pair (Raiser Cable) Un-armoured with colour coded 0.5Sq.mm annealed copper conductor Telephone cable in already laid PVC Conduits laid in floor and all other accessories required for Erection in all aspects should be included in the Offer. PASSIVE COMPONENTS FOR VOICE,rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 130 | Supply and connecting the Jumpering Wires for entire Voice network wherever required, rate includes all materials, labour charegs, transportation, loading & unloading, etc. |
| 131 | Supplying, erecting, connecting and commissioning of 24Port Cat 6, Angular Unloaded Jack / Patch Panel at MDF Side, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 132 | Supplying, erecting, connecting and commissioning of 24Port Cat 6, Angular Unloaded Jack / Patch Panel at Field Side, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 133 | Supplying, erecting, connecting and commissioning of Cat 6, RJ 45 Information Outlets at MDF and Field Side Patch Panel, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 134 | Supplying, erecting, connecting and commissioning of Cat 6, 7" Lockable Type Patch Chord at Resource Side, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 135 | Supplying, erecting, connecting and commissioning of Cat 6, 7" Lockable Type Patch Chord at Field Side, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 136 | Supplying, erecting, connecting and commissioning of Cat 6, RJ 45 Information Outlets at Field Side, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 137 | Supplying and laying the Cat 6 Giga speed unshielded twisted pair cable with 23 AWG solid copper conductors in already laid PVC Conduits at Field Side, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 138 | Termination of Cat 6 Voice Cable at both the ends (Information Outlet and Jack Panel End), rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 139 | Supplying, erecting, connecting and commissioning of EPABX with 80Nos Extensions and 9Nos Incoming Lines and all other accessories required for Erection in all aspects should be included in the Offer (Wall Mount), rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 140 | Supplying, erecting, connecting and commissioning of Digital Key Phone EON510(Reception)and all other accessories required for Erection in all aspects should be included in the offer, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 141 | Supplying, erecting, connecting and commissioning of Analog Caller ID Phone and all other accessories required for Erection in all aspects should be included in the offer, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 142 | Testing and Commissioning of Voice data system including labour charges etc. |
| 143 | Preparation of "As Built Drawings" and submission of 3 Sets of hard copies and 1 Set of soft copy for entire Voice net work, after completion of the work |
| 144 | Fire Detection, Alarm, Public Address system |
| 145 | Supply and Installation of one Loop addressable analogue panel complete with battery charger, SMF battery, auto dialer, built in or external continuous on line printer etc., (Location @ waiting lobby area). 1 Additional network card provision to be considered in Fire alarm panel for Base builder"s Main fire alarm panel communication purpose, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 146 | Supply and Installation of Full Function LCD repeater panel at site, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 147 | Supply and Installation of Mimic panel with LEDs indication at near to toilet area, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 148 | Supply and Installation of Analogue Addressable Multi technology-Optical +Heat smoke detectors, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 149 | Supply and Installation of Analogue Addressable Heat Detectors,rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 150 | Supply and Installation of Analogue addressable Optical/Photoelectric smoke detectors, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 151 | Supply and Installation of Analogue addressable Manual pull/call points, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 152 | Supply and Installation of Analogue addressable Control modules, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 153 | Supply and Installation of Analogue addressable Monitor Modules,rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 154 | Supply and Installation of Analogue addressable Short circuit isolators, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 155 | Supply and Installation of Analogue addressable Loop sounders with strobe (or) ordinary loop sounders with control modules.The cost of Control Module to be included, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 156 | Supply and Installation of Response Indicators, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 157 | Supply and Installation of fully featured Voice alarm/announce system integrated with the Fire alarm system and communicating with the PA system for broad casting evacuation procedures during alarm etc., including required hardware/communicators.The number of channels required shall be approximately 6 and the equipment shall be able to record and store different sets of announcements for each zone, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 158 | Supplying, Laying of 8 core x 1 Sq.mm. twisted multi strandcopper conductors, PVC -FRLS insulated overall braided shielded armoured PVC - FRLS sheathed cables, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 159 | Supplying, Laying 8 core x 1 Sq.mm. twisted multi strandcopper conductors, PVC -FRLS insulated overall braided shielded unarmoured PVC - FRLS sheathed cables. |
| 160 | Supplying, Laying of 2 core x 1 Sq.mm. twisted multi strandcopper conductors, PVC -FRLS insulated overall braided shielded unarmoured PVC - FRLS sheathed cables. |
| 161 | Supply and fixing of Glands and lugs suitable for 2 core cables, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 162 | Testing and Commissioning of the Fire Alaram system, etc., rate includes necessary materials and Labour charges |
| 163 | Providing Public Address system |
| 164 | Supply & fixing of Column/Wall mounting Box type indoor speakers-15Watts RMS, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 165 | Supply and fixing of Recessed/Surface mounting Ceiling type indoor speakers - 6 Watts RMS with ceiling ring suitable to the Architect"s choice. Model:LBD0606 BOSCH make, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 166 | Supply and fixing of Central working and standby amplifiers suitable for the speaker output load plus additional 25-30 Nos. indoor speakers plus 20% spare capacity as specifed.(2nos. 240W Amplifier) Model:LBD 1935 BOSCH make, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 167 | Supply and Installation of Gooseneck microphones with pre amplifiers for making announcements at principal room.The 6 zone selection provision shall be made available at principal room and the cost for the same to be included.Each zone shall be with a minimum of 240W amplifiers. Model:LBD1990 Plena voice alarm controller and LBB1956 Plena voice alarm call station, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 168 | Supplying and commissioning Wall mounted type suitable rack for Amplifier and CD Player, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 169 | Supplying, laying 15Mtr. length MIC extension cable, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 170 | Supplying & laying of 2/3 core x 1.0 Sq.mm. twisted multi strand tinned copper conductors,PVC FRLS insulated overall shielded armoured/Steel braided/Un armoured and PVC FRLS sheathed cables. 2 Core 24/0.2 ATC Twin flat twisted copper cable in 2.0mm. Thick Heavy duty PVC conduit with necessary accessories required for the job, rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 171 | Supplying & laying of 25mm. dia PVC Flexible hose in ceiling/concealed in wall/partitions with necessary clamps,screws etc., rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 172 | Testing and Commissioning of the Public Address system, including all necessary required tools with labour charges |
| 173 | Providing CCTV Surveillance system |
| 174 | 5MP IR Fixed Dome Network Camera: supply and Installation of High quality imaging with 5 MP resolution :2592 × 1944 Excellent low-light performance with powered-by-DarkFighter technology. Focus on human and vehicle targets classification based on deep learning. Face capture Motion detection (human and vehicle targets classification), video tampering alarm,exception, Unattended baggage detection, object removal detection, scene change detection, audio exception detection. MicroSD/SDHC/SDXC card (256 GB) local storage Water and dust resistant (IP67), rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 175 | 5MP IR Fixed Dome Network Camera:Supply and Installation of High quality imaging with 5 MP resolution :2592 × 1944 Excellent low-light performance with powered-by-DarkFighter technology. Focus on human and vehicle targets classification based on deep learning. Face capture Motion detection (human and vehicle targets classification), video tampering alarm,exception, Unattended baggage detection, object removal detection, scene change detection, audio exception detection. MicroSD/SDHC/SDXC card (256 GB) local storage Water and dust resistant (IP67) and vandal-resistant (IK10), rate includes all materials, laburs charges, loading & unloading, transportation charges etc. |
| 176 | Supply and Installation of 16 Channel IP Based Networkable Video Recorder with required accessories, rate includes all materilsa, labour charges, transportation, loading & unloading charges, etc. |
| 177 | Supply and Installation of 9U Rack with Monitor tray,Key board tray,12 Socket PDU and other required accessories, including labour charges, transportation, loading & unloading, etc. |
| 178 | Supply and Installaiton of LED Monitor 32" (Location at Ground floor BMS room) with required accessories including labour charges, transportation, loading & unloading, etc. |
| 179 | Supply & configuration the Software for IP based Cameras, including labour charges and required accessories. |
| 180 | Supplying,Laying of Power Over Ethernet Cable (CAT 6) in 2.0mm. Thick heavy duty PVC conduit with necessary accessories required for the job. |
| 181 | Supplying and Laying of Termination for CAT 6 cables, including all materials, labour charges, transportation, loading & unloading charges, etc. |
| 182 | Testing and Commissioning of the above system, including all necessary required tools with labour charges |
| 183 | Video Conferencing system |
| 184 | Supply of SAMSUNG SMART SIGNAGE 75 INCHES Resolutions: HD (3840 x 2160) Brightness:350 Contrast Ratio:4000:1Response : 8ms Warranty:3 Years (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 185 | Supply of SAMSUNG SMART SIGNAGE 65 INCHESResolutions: HD (3840 x 2160) Brightness:350 Contrast Ratio:4000:1 Response : 8ms Warranty:3 Years (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 186 | Supply of Logitech Group Video Conferencing Webcam Brand: Logitech Generic Name: Conferencing Webcam Model no.: Group Video Conferencing Volumetric Weight: 5 kg Main Features :Video conferencing kit-GROUP, the amazingly affordable video conferencing system for mid- to large-sized conference rooms, allows any meeting place to be a video collaboration space. It"s as simple to use as a mobile phone and affordable as an office chair, it"s easier than ever to include anyone in the conversation. USB Plug-and-Play connectivity makes GROUP a breeze to deploy and use. (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 187 | Supply of Logitech Rally VIDEO-Exceptional Video Quality, Adaptive Pan, Tilt and Zoom, Sleek Industrial Design.AUDIO-Advanced Modular Audio, Front-of-Room Audio, Up to 7 Mic Pods CONNECTIVITY & USAGE- Smart Cabling and Content Sharing, Loud and Clear, Optional Flexible Mic Pod Cabling, Optional Mounting Kit.(Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 188 | Supply of Mini PC Core I5 processor,8GB RAM, 256SSD (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 189 | Supply of HDMI Cable(15 Meters)(Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 190 | Supply of WIRELESS KEYBOARD & MOUSE (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 191 | Supply of Active USB cable 2.0 V with power (15 Metre ) (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 192 | Supply and Installation of Hydraulic Pop up box contains HDMI port, USB port, DATA port, Ethernet port, Telephone port, MIC and Audio port along with 2 Nos of Power sockets (Rate includes all materials, labour charges, transpotration, loading & unloading charges, etc) |
| 193 | Supply of Biometric Access Control system with software,Support- Finger print/PIN/Proximity card (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 194 | Supply of Exit Biometric Proximetric Reader (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 195 | Supply of Electromagnetic Lock with 600LBS (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 196 | Supply of 12V 5A Power Supply unit (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 197 | Supply of Swing type automatic door controller with all accessories (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 198 | Installation charges for biometric and auto door controller (Rate includes all materials, transpotration, loading & unloading charges, etc) |
| 199 | Installation Testing and commissioning charges for Video conferencing system, including all necessary required tools with labour charges |
| 200 | Air Conditioning Facility |
| 201 | Supply & Installation offactory made DX Ceiling Suspended Ductable split package unitscomplete with [1] Centrifugal blower, cooling coil, Insulated Drain tray, Pre-filters etc., along with matching air cooled condenser with INVERTER scroll compressor. [2] Microprocessor control [3] R407C/R410a- Gas charging, [4] Safety controls, [5] Canvass connection with moutn dampers [6]Unit electrical starter panel with PF contact for BMS ON / OFF status and monitoring through BMS. [7] Unit Starter panel shall have incomer power trip provision based on Fire alarm signal. [8] Refrigeration Controls like thermostatic Expansion valve, drier stop valve etc. [9] Internal Refrigerant piping [10] Including nescessary Civil works like wall opening and closing asper site condition [11] Including installation of Indoor and outdoor units with M.S. Supports as per site condition. Capacities indicate are actual operating for Coimbature outside condition and for room temp of 22.7deg C with 55% RH, Condensing Temp - 103Deg F & Suction Temp - 42Deg F . |
| 202 | 17 TR - 6800CFM -Ceiling suspended ductable unit with Inverter compressor(Considered Twin Circuit per unit) |
| 203 | Supply & laying of 18SWG Hard drawn Refrigerant piping between indoor & outdoor units for the above DX units including pressure testing and Supports,clamps, necessary civil works like wall opening and closing for Refrigerant pipes as per site condition + 13mm thick Nitrile Rubber Tubular pipe insulation etc, rate includes all materials, labour charges, transportation, loading & unloading, etc. |
| 204 | 1-1/8" (28.58mm) |
| 205 | 5/8" (15.88mm) |
| 206 | Supply & laying of following size copper Armoured Power cabling between breaker to outdoor unit and outdoor to indoor unit, including necessary materials, labour charegs, trasnportation, loaidng & unloading etc. |
| 207 | 4C x 10 sq.mm |
| 208 | Supply & laying of 3C x 1.5 sq.mm Copper Controlcabling between indoor to Outdoor unit, including necessary materials, labour charegs, trasnportation, loaidng & unloading etc.. |
| 209 | Supply & laying of High Density PVC drain pipe with 9mm thick Nitrile rubber insulation, including necessary materials, labour charegs, trasnportation, loaidng & unloading etc. |
| 210 | 25mm dia |
| 211 | Supply & installation Ladder typeCovered GI cable trays with 16swg Hot dipped galvanised including tee,right angle bends,etc., including all fixing supports and accessories, labour charges, transportation charges, etc |
| 212 | 300mm Wide |
| 213 | Supply & laying of 8SWG Copper wire with double run from panel board to indoor & indoor to outdoor unit for Earthing rate includes all necessary materials, labour cahrges, transportation, loading & loading charges, etc. |
| 214 | Supply & fixing of Potential free contact to the DX Unit Starterpanel for unit Motor trip on fire alaram signal, rate includes all required materails, labour charges, transportation, loading & unloading charges, etc. |
| 215 | Supply, Installation, Testing & Commissioning & Handing over of the following: Sheet Metal Work with TDF Flanges for all sizes of the duct. Fabrication as per IS Standards Galvanizing shall be Class VII – light coating of zinc, nominal 120 gm / sqm surface area and Lock Forming Quality prime material alongwith mill test certificates.In addition, if deemed necessary, samples of raw material, selected at random by owner’s site representative shall be subject to approvaland tested for thickness and zinc coating at contractor’s expense. All duct construction and installation shall be in accordance with IS standards.In addition ducts shall be factory fabricated utilizing the following machines to provide the requisite quality of ducts. All ducts shall be fabricated and installed in workmanlike manner, conforming to relevant IS codes. The Duct shall be included with Guide vanes, Adjustable splitter dampers, fastners, threaded rods, nut, Fire retardent Gasket and washers as per specs and ducts supported with Hi-tech Supports at regular intervalas as mentioned in the technical specifications., including all required materials, transportation, labour charges, loading & unloading charges, etc. |
| 216 | 22 G up to 751 to 1500mm |
| 217 | 24 G Up to 750mm |
| 218 | Supply & fixing of Extruded Aluminium powder coated Supply air square diffuser of the following size with G.I Plenum(24G) of Following Diffuser size . The diffuser shall be mounted in the GI plenum box , the inlet connector suitable for flexible duct size, including necessary GI Screw, Bolt, nut & supports, labour charges, transportation, loading & unloading charges, etc.. The diffuser Neck size should be suitable for CFM as per GFC drg. |
| 219 | 300mmX300mm |
| 220 | 600mmX600mm |
| 221 | Supply & fixing of Extruded Aluminium powder coated Return air square diffuser of the following sizeincluding necessary GI Screw, Bolt, nut & supports, labour charges, transportation, loading & unloading charges, etc.. |
| 222 | 300mmX300mm |
| 223 | 600mmX600mm |
| 224 | Supply & fixing - Extruded Aluminimum powder coated Supply air grills with VCD with necessary GI Screw, bolt, nut & supports. ( colour for the grill to b conifremed by Arch/ PMC team before placing theorder) The Grille plenum should be fixed to the false ceiling using 4inch tap (Water proof PE coated fabric Tap withy thick of 0.26mm+/- 10%) to ensure Zero leakage before fixing grilles at false ceiling. including labour charges, transportation, loading & unloading charges, etc. |
| 225 | Supply & fixing - Extruded Aluminimum powder coated Return air grills without VCD with necessary GI Screw, bolt, nut & supports, labour charges, transportation, loading & unloading charges, etc. ( colour for the grill to b conifremed by Arch/ PMC team before placing theorder) |
| 226 | Supply and fixing - Al powder coated Slotted Diffuser for supply & Return air with out VCD, including necessary GI Sreq, bolt, nut & supports, labour charges, transportation, loading & unloading charges, etc. The BOX Channel supports for the slotted diffusers shall be in the scope of interior vendor. The Slotted diffuser should be fixed to the false ceiling using 4inch tap (Water proof PE coated fabric Tap withy thick of 0.26mm+/- 10%) to ensure Zero leakage before fixing diffuser at false ceiling. |
| 227 | 2 slot |
| 228 | Supply and Fixing - Hitt & Miss Damper - G.I.Powder Coated (18G) , Collar Dampers of opposed blade type made out of Aluminium alloy extrusion with anodised matt black finish, including necessary GI Sreq, bolt & nuts, labour charges, transportation, loading & unloading charges, etc. |
| 229 | Supply and fixing of multiblade Opposed type Volume control damper constructed out of 18GGI damper with suitable links,and nylon bearings with quadrants and levers for manual control of volume flow of air for proper distribution and balancing of the system with lever locking facility, including necessary GI Bolt, nuts & washers,labour charges, transportation, loading & unloading charges, etc. |
| 230 | Supply & Fixing of Factory Fabricated Insulated Flexible duct for connecting from main duct to diffuser box with Grip clamp. The length of the flexible duct shall be around 1.0 to 1.8 mtr The flexible duct shall me made of triple lamination of aluminium foil, polyester and metalised polyester film permanently bonded to a coated spring steel wire helix.The exterior shall be wrapped with 25mm thick 16 kg / cum fibreglass insulation.The outer insulation jacket / vapour barrier made of fibreglass reinforced metalised polyester film laminate, including all required materials,labour charges, transportation, loading & unloading charges, etc. |
| 231 | 200 mm dia |
| 232 | Supply & Fixing of GI round spicot damper for flexible duct connection, including necessary materials, labour charges, transportation, loading & unloading charges, etc. |
| 233 | 200 mm dia |
| 234 | SupplyFabrication , and erectionofDouble canvas connection made out of fire retardent canvas cloth with Zip required necessary fixing arrangements including nuts & bolts, labour charges, transportation, loading & unloading charges, etc. |
| 235 | Supply & fixing of Thermal insulation for supply air duct using 9mm thick class " O " Closed cell nitrile rubber based elastomeric insulation with the density of 40 - 55 kg /m³ . The insulation manafactured as per BS 476 Part 7test & which should also meet UL94 supplementary materials for air distribution systemwhich should not absorbs less 0.2% water by volume (ASTM D 1056), should not support microbial growth (ASTM D2180, G21, G22) and should not emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.033W/m.k @ 0deg C as per DIN EN 12667. and water vapor permeance of 0.10. Joints should be sealed with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable). Adhesive shall be used additionally with VOC level not exceeding 50 grms / Litre,including nuts & bolts, other necessary materials, labour charges, transportation, loading & unloading charges, etc. |
| 236 | Supply & fixing of Acoustic insulation for Supply air duct using10 mm thick class 1 rating Open cell nitrile rubber elastomeric insulation with density of 140 - 180 kg / m³. The insulation manafactured as per BS 476 Part 7 & which should also meet UL 94testsupplementary materials for air distribution systemwhich should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM 2180, G21, G22) and should not emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.04W/m K @ 20 degC as per DIN EN 12667. and water vapor permeance of 0.10. Adhesive shall be used additionally with VOC level not exceeding 50 grms / Litre, including required materials, labour charges, transportation, loading & unloading charges, etc. |
| 237 | Supply and Fixing -UL 555listed MotoraisedFiredamper with 300mm sleeveDampers G.I.16G. The fire dampers of atleast 2 Hours fire rating with angle frame (on both sides of wall) and multileaf dampers out of 18G with cross bush.The dampers to signal accidental closure through built in limit switch. Include for hard wiring between starter and Limit switch, including necessary Bolt, nuts & supports,including labour charges, transportation, loading & unloading charges, etc. |
| 238 | Supply and Fixing -spring return Actuator with control panel for MotoraisedFire damper Dampers including step down transformer, The Actuator Torque shall be suitable to theDamper size, including labour charges, transportation, loading & unloading charges, etc. |
| 239 | Supply, laying & termination of 3C x 2.5Sq.mm Power wiring between Actuator to AHU Starter panel with necessary supports & clamps, including labour charges, transportation, loading & unloading charges, etc. |
| 240 | Supply, laying & termination of 3C x 1.5Sqmm power cabling between 230V single phase power socket to Actuator with necessary supports & clamps, including labour charges, transportation, loading & unloading charges, etc. |
| 241 | Supply & fixing of 16G M.S.Conduit for cable laid between actuator to AHU panel including required materials, labour charges, transportation, loading & unloading charges, etc. |
| 242 | Supply and Installation of Weather proof Aluminium powder coated air louvers with metal bird wire mesh based on the sizes and location shown as per HVAC tender drawing, rate includes all required materials, labour charges, transportation, loading & unloading charges, etc.. Make:Ravi Star /Cosmos / Air master |
| 243 | Supply testing,commissioning of Centrifugual Duct Inline Exhaust air unit complete with double skin insulated puf panels, pre cast vertical and horizontal frame sections, fan section, two speed EFF -1 rated motors,filter section,drive package. EA Unit door interlock limit switch, etc. FA Unit to be supplied with matching flanges for mouth connection, including labour charges, transportation, loading & unloading charges, etc..Fan Make :- Kruger/Caryair/Ostberg / Elta fans |
| 244 | 200 CFM |
| 245 | 600 CFM |
| 246 | Supply, Laying & Termincation of 4C x 2.5Sqmm Armoured copper cable beween isolater to Exhaust Fan, including labour charges, transportation, loading & unloading charges, etc. |
| 247 | Supply & installation of Fan speed controller for single phase exhasut fan, including labour charges, transportation, loading & unloading charges, etc. |
| 248 | Supply & installaion of Exhaust Grill |
| 249 | Supply & installaion of Fresh air door louvers |
| 250 | Civil and masonary works including fire rated (2 hours) sealants for openings around fans, duct penentrations, existing openings and any other opening falling under the scope of HVAC works being carried out.Project site to be visited and the extent of civil works to be identified before quoting. Any extra work claims at a later date will not be accepted. |
| 251 | Pressure Testing of Supply Air Duct Using Rolastar machines, as per SMACNA standards for duct erected, including required tools with labour charges, transportation charges, etc. |
| 252 | Supply, Installation, Testing & Commisioning of inverter /Digital scroll compressor with Variable refrigrant system connectable to multiple indoor units.Outdoor unit shall be factory assempled weather proof casing constructed from heavy gauge mild steel panels.The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficeint scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigrant piping. Units shall be tested and commissioned with additional refrigerant.The unit shall be compatible for BMS operation with inclusive supply of VRV System interface compatible with RS485 Modbus, Neccessary relay card /soft integrator to be provided, Including Necessary civil pedestal for outdoor units with suitable M.S. supports, rubber pads etc., Rateincludes all required materials,labour charges, transportation, loading & unloading charges, etc. |
| 253 | 34 HP Out door Unit |
| 254 | Supply Installation, Testing & Commisioning of Indoor Units shall be as specified. The indoor unit shall have independent electronic control valve to control the refrigrant flow rate respond to variations of the airconditioning load of the room. The fan shall be aerodynamically designed turbo multiblade type. Statically and dynamically balanced to ensure lowest noise. The Unit should have drain Pump . The cooling coil shall be made of seamless copper tube. The tube shall be hydrolically or mechanically expanded and tested for 21 Kg/cm2. Indoor units shall have prefilters and wireless remote control. With necessary supports for indoor units. Rate includes all required materials,labour charges, transportation, loading & unloading charges, etc. |
| 255 | 0.8 TR Cassette Type Indoor Unit |
| 256 | 1.05 TR Cassette Type Indoor Unit |
| 257 | 2.64 TR Cassette Type Indoor Unit |
| 258 | 3.3 TR Cassette Type Indoor Unit |
| 259 | 4.55 TR Cassette Type Indoor Unit |
| 260 | Supply and Installation of 18G Copper Piping insulated with19mm thick elastomeric nitrile rubber insulation and finished with polyshield coating with Necessary fittings, Y Joints and headers. (This includes the pressure testing and Refrigerant Gas charging ) betweenindoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all external piping shall run in covered cably tray. Minor civil works like wall opening and closing for copper piping, labour charges, transportation charges, loading & unloading charges are included. (Incase any changes in the layout after approval, then the following unit rates shall be applicable.) |
| 261 | 34.9 mm dia |
| 262 | 31.75 mm dia |
| 263 | 28.57 mm dia |
| 264 | 25.4 mm dia |
| 265 | 22.22 mm dia |
| 266 | 19.05 mm dia |
| 267 | 15.87 mm dia |
| 268 | 12.7 mm dia |
| 269 | 9.53 mm dia |
| 270 | 6.35 mm dia |
| 271 | Supply & installation of Ladder type G.I. tray and covered with G.I.Sheetfor copper tubes , Upto and Including 450mm wide - 1.6mm. & above 2mm thick, including all required materials,labour charges, transportation, loading & unloading charges, etc. |
| 272 | 450mm wide |
| 273 | Supply & Installation of Refnet Joints for Outdoor units, including required materials, labour charges, transportation, loading & unloading charges, etc. |
| 274 | Supply & Installation of Refnet Joints for Indoor units, including required materials, labour charges, transportation, loading & unloading charges, etc. |
| 275 | Supply & Installation of Corded remote in the work site, including required materials, labour charges, transportation, loading & unloading charges, etc. |
| 276 | Supply & Charging of Refrigerant R410A, including required materials, labour charges, transportation, loading & unloading charges, etc. |
| 277 | Supply & fixing of Cental controller / BMS integrator for VRV units, including required materials, labour charges, transportation, loading & unloading charges, etc. |
| 278 | Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Instalation with Necessary supports, screws,labour charges, transportation, loading & unloading charges, etc. |
| 279 | 20mm |
| 280 | 25mm |
| 281 | 32mm |
| 282 | Supply,Laying & Termination of 2cx1.5sq.mm Transmission cable between IDU to ODU & ODU to System interface unit with Necessary supports, screws, labour charges, transportation, loading & unloading charges, etc. |
| 283 | Supply & fixing of 25mm PVC conduitscomplete with all fittings & accessories with Necessary supports, screws, labour charges, transportation, loading & unloading charges, etcetc. |
| 284 | Supply, laying & termination of following cable from Isolator to VRF Outdoor unit and from 10Amps power socket to indoor units with necessary supports, screws, labour charges, transportation, loading & unloading charges, etcetc..( Isolator & power sockets to be provided by Electrical Vendor including the suitalbe cable upto isolators & sockets.) |
| 285 | 3C x 1.5Sqmm copper Armoured cable |
| 286 | 4C x 10Sqmm copper Armoured cable |
| 287 | Electrical works and Panel boards |
| 288 | Supplying, erecting, connecting & commissioning of WALL MOUNTED CUBICLE TYPE 14 SWG thick CRCA sheet compartmentalised modular type with powder coated SUB LIGHTING PANEL.The Board shall be incorporated with the following:-INCOMER: 100 AMPS TPN MCCB With 36KA(Ics) Withstanding Capacity With adjustable Over load and Short circuit releases.1 No.OUTGOINGS :32 AMPS TP MCB"C" curve4 Nos.(SUB LIGHTING PANEL(WALL MOUNTED TYPE) (POWER SHALL BE TAKEN FROM 200A TAP-OFF BOX -1). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 289 | Supplying,erecting,connecting & commissioning FLOOR MOUNTED CUBICLE TYPE 14 SWG thick CRCA sheet compartmentalised modular type with powder coated SUB POWER PANEL.The Board shall be incorporated with the following:-INCOMER: 200 AMPS TPN MCCB With 36KA(Ics) Withstanding Capacity With adjustable Over load and Short circuit releases.… 1 No.OUTGOINGS :100 AMPS TPN MCCB with 25KA(Ics) Withstanding Capacity With adjustable Over load and Short circuit releases.… 1 No.63 AMPS TPN MCCB with 25KA(Ics) Withstanding Capacity With both fixed Over load and Short circuit releases.… 4 Nos.(SUB POWER PANEL (POWER SHALL BE TAKEN FROM 200A TAP-OFF BOX -2). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 290 | Supplying,erecting,connecting & commissioning FLOOR MOUNTED CUBICLE TYPE 14 SWG thick CRCA sheet compartmentalised modular type with powder coated SUB POWER PANEL.The Board shall be incorporated with the following:-INCOMER: 250 AMPS TPN MCCB With 36KA(Ics) Withstanding Capacity With adjustable Over load and Short circuit releases.… 1 No.OUTGOINGS :63 AMPS TPN MCCB with 25KA(Ics) Withstanding Capacity With both fixed Over load and Short circuit releases.… 6 Nos.32 AMPS TPN MCCB with 25KA(Ics) Withstanding Capacity With both fixed Over load and Short circuit releases.… 2 Nos. A/C PANEL (POWER SHALL BE TAKEN FROM 250A TAP-OFF BOX -3). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 291 | Supplying,erecting,connecting & commissioning WALL MOUNTED CUBICLE TYPE OUTGOING UPS PANEL.The Board shall be incorporated with the following:- INCOMER: 80 AMPS TP2N MCB"D" curve with 160 AMPS Removable neutral link.. 1 NoOUTGOINGS:63 AMPS TP2N MCB"D" curve.. 4 Nos..(OUTGOING UPS PANEL FOR WORKSTATION AND SERVER LOADS). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 292 | Supplying,fixing, connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. LDB- 12 WAY TPN 3 TIER MCB DBINCOMER: 32 AMPS 4P MCB .. 1 No. OUTGOINGS: 25 AMPS DP,30mA ELMCB.. 3 Nos. 6 -10 AMPS SP MCB.. 36 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 293 | Supplying,fixing,connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. LDB- 8 WAY TPN 3 TIER MCB DB INCOMER: 32 AMPS 4P MCB .. 1 No. OUTGOINGS: 25 AMPS DP,30mA ELMCB.. 3 Nos. 6 -10 AMPS SP MCB.. 24 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 294 | Supplying,fixing,connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. PDB CUM AC DB- 12 WAY TPN 3 TIER MCB DB INCOMER : 63 AMPS 4P MCB .. 1 No. OUTGOINGS: 40 AMPS DP,30mA ELMCB .. 3 Nos. 10 -25 AMPS SP MCB.. 36 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 295 | Supplying, fixing, connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. PDB CUM AC DB- .8 WAY TPN 3 TIER MCB DB INCOMER : 63 AMPS 4P MCB .. 1 No. OUTGOINGS: 40 AMPS DP,30mA ELMCB .. 3 Nos. 10 - 25 AMPS SP MCB.. 24 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 296 | Supplying,fixing,connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. UPS DB FOR WORKSTATION AND SERVER LOADS - 12 WAY TP2N 3 TIER MCB DBINCOMER :63 AMPS TP MCB WITH 125 AMPS Removable Neutral Link … 1 No. OUTGOINGS: 40 AMPS DP MCB .. 3 Nos. 10 - 25 AMPS SP MCB.. 36 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 297 | Supplying,fixing,connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. UPS DB FOR WORKSTATION AND SERVER LOADS - 8 WAY TP2N 3 TIER MCB DB INCOMER: 63 AMPS TP MCB WITH 125 AMPS Removable Neutral Link … 1 No. OUTGOINGS: 63 AMPS DP MCB .. 3 Nos. 10 - 25 AMPS SP MCB.. 24 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 298 | Supplying,fixing,connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. UPS DB FOR WORKSTATION AND SERVER LOADS - 6 WAY TP2N 3 TIER MCB DBINCOMER: 63 AMPS TP MCB WITH 125 AMPS Removable Neutral Link … 1 No. OUTGOINGS: 63 AMPS DP MCB .. 3 Nos. 10 - 25 AMPS SP MCB.. 18 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 299 | Supplying,fixing,connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS on wall/ Partitions with powder coated Angle Iron frames.All MCBDBs shall beof Doubledoor only with adopator box.Lighting and Power - "C" curve and UPS - "D" curve. UPS DB FOR WORKSTATION AND SERVER LOADS - 4 WAY TP2N 3 TIER MCB DBINCOMER: 32 AMPS TP MCB WITH 63 AMPS Removable Neutral Link … 1 No. OUTGOING : 25 AMPS DP MCB .. 3 Nos. 10 - 25 AMPS SP MCB.. 12 Nos. Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 300 | Supplying,erecting,connecting & commissioning 80 AMPS 4P MCB in powder coated MS Enclosure (16 SWG) on an angle iron frame with necessary interconnections cable box, brackets,screw,bolts, nuts, required other materials, labour charges, transportation, loading & unloading charges, etc., for incoming Control of 30 KVA UPS.MCB / FSU/ MCCB CONTROL |
| 301 | Supplying,erecting,connecting & commissioning 63 AMPS 4P MCB in powder coated MS Enclosure (16 SWG) on an angle iron frame with necessary interconnections cable box, brackets,screw,bolts, nuts, other materials, labour charges, transportation, loading & unloading cahrges, etc., for DX outdoor units control. (To be considered with weather-proof arrangement) MCB / FSU/ MCCB CONTROL |
| 302 | Supplying,erecting,connecting & commissioning 40 AMPS 4P MCB in powder coated MS Enclosure (16 SWG) on an angle iron frame with necessary interconnections cable box, brackets,screw,bolts, nuts, other materials, labour charges, transportation, loading & unloading cahrges,etc., for VRV outdoor units control. (To be considered with weather-proof arrangement)MCB / FSU/ MCCB CONTROL |
| 303 | Supplying,erecting,connecting & commissioning 16 AMPS 4P MCB in powder coated MS Enclosure (16 SWG) on an angle iron frame with necessary interconnections cable box, brackets,screw,bolts, nuts, other materials, labour charges, transportation, loading & unloading cahrges, etc., for DX indoor units control.MCB / FSU/ MCCB CONTROL |
| 304 | Supplying,laying,connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps,screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY-3 1/2 Cx120 Sq.mm.XLPE Al.(From 250A Tap-off box to A/c Panel) |
| 305 | Supplying,laying,connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps, screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY -3 1/2 Cx95 Sq.mm.XLPE Al.(From 200A Tap-off box to Sub power Panel) |
| 306 | Supplying, laying, connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps, screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY-3 1/2 Cx 35 Sq.mm.XLPE Al.(From Sub Power Panel to 30KVA UPS incoming control)-3 1/2 Cx 25 Sq.mm.XLPE Al.(From 200A Tap-off box to Sub Lighting Panel) |
| 307 | Supplying, laying, connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps, screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY-3 1/2 Cx 25 Sq.mm.XLPE Al.(From 200A Tap-off box to Sub Lighting Panel) |
| 308 | Supplying, laying, connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps, screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY-4Cx16 Sq.mm. Cu.(From Sub Power panel toPDB"es and A/c Panel to DX outdoor units) |
| 309 | Supplying, laying, connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps, screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY -4Cx10 Sq.mm. Cu. (From A/c panel to VRV outdoor units) |
| 310 | Supplying,l aying, connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps, screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY- 4Cx6 Sq.mm. Cu.(From Sub Lighting panel to LDB"es) |
| 311 | Supplying, laying, connecting & commissioning thefollowing 1.1KV Grade XLPE Underground cables withnecessary clamps, screws, other materials, labour charges, transportation, loading & unloading cahrges, etc., in the following methods:-CLAMPED ALONG CEILING/ WALL/COLUMN/ LAID IN TRAY- 4Cx4 Sq.mm. Cu.(From A/c panel to DX indoor ceiling suspended units) |
| 312 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping. -3 1/2 Cx120 Sq.mm.XLPE Al.(From 250A Tap-off box to A/c Panel). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 313 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping. -3 1/2 Cx95 Sq.mm.XLPE Al.(From 200A Tap-off box to Sub power Panel). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 314 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping. - 3 1/2 Cx 35 Sq.mm.XLPE Al.(From Sub Power Panel to 30KVA UPS incoming control). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 315 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping. -3 1/2 Cx 25 Sq.mm.XLPE Al.(From 200A Tap-off box to Sub Lighting Panel). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 316 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping. -4Cx16 Sq.mm. Cu.(From Sub Power panel toPDB"es and A/c Panel to DX outdoor units). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 317 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping. - 4Cx10 Sq.mm. Cu. (From A/c panel to VRV outdoor units). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 318 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping. - 4Cx6 Sq.mm. Cu.(From Sub Lighting panel to LDB"es). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 319 | Supplying, terminating, connectingand commissioningthe aboveUndergroundcableswith Double compressiontype SIBG Cableglands.Thecostofearthingglandwith copper strips/wiresshallalso be included. The cablesshallbe terminated with aluminium /copper lugs after crimping.- 4Cx4 Sq.mm. Cu.(From A/c panel to DX indoor ceiling suspended units). Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. |
| 320 | Supplying, laying, connecting & commissioning 5 Runs of 25 Sq.mm. with 2 Runs of 10 Sq.mm.PVC Insulated multistranded FRLS copper conductor wires for continuous earthing in 2.0mm. thick MS conduits laid in wall/partitions or laid in open fashion/above false ceiling with necessary clamps,screws, Rate includes all required materials, labour charges, transportation, loading & unloading charges, etc. etc., for 30KVA Incoming and outgoing to UPS panel. MAINS WIRING. |
| 321 | Supplying, laying, connecting & commissioning 5 Runs of 16 Sq.mm. with 2 Runs of 6 Sq.mm.PVC Insulated multistranded FRLS copper conductor wires for continuous earthing in 2.0mm thick MS conduits laid in wall/ partitions or laid in open fashion/above false ceiling with necessary clamps,screws, other required materials, labour charges, transportation, loading & unloading charges, etc., for UPS DB for workstation and server loads.MAINS WIRING |
| 322 | Supplying, laying, connecting & commissioning4 Runs of 10 Sq.mm. with 2 Runs of 4 Sq.mm.PVC Insulated multistranded FRLS copper conductor wires for continuous earthing in 2.0mm thick MS conduits laid in wall/ partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc., MAINS WIRING. |
| 323 | Supplying, laying, connecting & commissioning4 Runs of 6 Sq.mm. with 2 Runs of 2.5 Sq.mm.PVC Insulated multistranded FRLS copper conductor wires for continuous earthing in 2.0mm thick MS conduits laid in wall/ partitions or laid in open fashion above false ceiling with necessary clamps,screws, other required materials, labour charges, transportation, loading & unloading charges, etc., MAINS WIRING. |
| 324 | Supplying, laying, connecting and commissioning 2 Runs of 6 Sq.mm PVC Insulated multistranded copper conductor FRLS wires (One each for Phase, Neutral) with 1 Run of 2.5 Sq.mm. PVC Insulated multistranded FRLS copper conductor wires for continuous earthing in 1.6mm thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, loading & unloading, transportation charges,etc.,from PDB to indoor A/C Points (POWER WIRING). |
| 325 | Supplying, laying, connecting and commissioning 2 Runs of4 Sq.mm PVC Insulated multistranded copper conductor FRLS wires (One each for Phase, Neutral) with 1 Run of 2.5 Sq.mm. PVC Insulated multistranded FRLS copper conductor wires for continuous earthing in already laid MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour chagres, transportation, loading & unloading charges, etc., from PDB to Power Points and indoor cassette units for POWER WIRING |
| 326 | Supplying, laying, connecting and commissioning3 Runs of 2.5 Sq.mm PVC Insulated multistranded copper conductor FRLS wires (One each for Phase, Neutral and earth) wires for continuous earthing in already laid MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc., for Raw power sockets for POWER WIRING |
| 327 | Supplying and fixing 6/16 AMPS SwitchedSocket combined in Manufacturer"s mounting box fixed flush with the wall/partition, including all reuquired materials, labour cahrges, transportation, loading & unloading charges, etc.,as directed by the departmental officers |
| 328 | Supplying and fixing 6 AMPS Switched Socket combined in Manufacturer"s mounting box fixed flush with the wall/partition, including all reuquired materials, labour cahrges, transportation, loading & unloading charges, etc. as directed by the departmental officers |
| 329 | Supplying and fixing, connecting and commissioning 25 AMPS socket combined with 25 AMPS DP MCB in Manufacturer"s mounting box fixed flush with the wall/partition, including all reuquired materials, labour cahrges, transportation, loading & unloading charges, etc.,as directed by the departmental officers |
| 330 | Supplying & laying of 25mm. dia. MS Conduits laid in floor/concealed in wall with accessories,necessary clamps, screws, including other reuquired materials, labour cahrges, transportation, loading & unloading charges, etc,as directed by the departmental officers |
| 331 | Supplying & laying of 25mm. dia. Heavy duty PVC Conduits laid in floor/concealed in wall with accessories, necessary clamps, screws, including other reuquired materials, labour cahrges, transportation, loading & unloading charges, etc.,as directed by the departmental officers |
| 332 | Supplying & laying of 25mm. dia. PVC flexible hose laid in partitions with necessary supports clamps, screws, including other reuquired materials, labour cahrges, transportation, loading & unloading charges, etc. as directed by the departmental officers |
| 333 | Supplying,wiring,connecting & commissioning thelightpoints with 3 Runs of 1.5 Sq.mm. PVC insulatedmultistranded Copper Conductor wires (One each for Phase,Neutral and earth) in 1.6mm. thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screwsetc.,including supplying and fixing of 6 AMPSSwitchin manufacturers mounting box fixed flush with the wall /Partitions, including other required materials, labour cahrges, transportation, laoding & unloading charges, etc..The maximum length will be 10.0 Mtrs. from switch board to first light point. LIGHT POINT WIRING- One Light Controlled by one Switch |
| 334 | Supplying,wiring,connecting & commissioning the light points with 3 Runs of 1.5 Sq.mm. PVC insulatedmultistrandedcopperConductor FRLS wires (One each forPhase,Neutral and Earth) in MS Conduits laid in wall/ partitions or laid in open fashion above false ceiling with necessary clamps, screws, other materilas required, labour charges, transportation, loading & unloading charges, etc, for additional points. The additional points will have to be wired from the first point mentionedunder ItemNo. 07.01.01.The maximum length willbe 6.0 Mtrs. for each additional point. |
| 335 | Supplying,wiring,connecting & commissioning thelightpoints with 3 Runs of 1.5 Sq.mm. PVC insulatedmultistranded Copper Conductor wires (One each for Phase, Neutral and earth) in 1.6mm. thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges,etc.,including supplying and fixing 6 AMPSSwitchin manufacturers mounting box fixed flush with the wall /Partitions.The maximum length will be 10.0 Mtrs. from switch board to first light point. LIGHT POINT WIRING - for 6 AMPS Independent switched socket combined including supplying and fixing 6 AMPS Switched Socket with MS box. |
| 336 | Supplying, wiring, connecting & commissioning thelightpoints with 3 Runs of 1.5 Sq.mm. PVC insulatedmultistranded Copper Conductor wires (One each for Phase,Neutral and earth) in 1.6mm. thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws,other required materials, labour charges, transportation, loading & unloading charges, etc., including supplying and fixing 6 AMPSSwitchin manufacturers mounting box fixed flush with the wall /Partitions.The maximum length will be 10.0 Mtrs. from switch board to first light point.LIGHT POINT WIRING - 6 AMPS Independent Switched Socket in the Switch Board itself. |
| 337 | Supplying, wiring, connecting & commissioning thelightpoints with 3 Runs of 1.5 Sq.mm. PVC insulatedmultistranded Copper Conductor wires (One each for Phase, Neutral and earth) in 1.6mm. thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges,etc., including supplying and fixing 6 AMPSSwitchin manufacturers mounting box fixed flush with the wall /Partitions.The maximum length will be 10.0 Mtrs. from switch board to first light point.LIGHT POINT WIRING-but for Mirror light points. |
| 338 | Supplying, wiring, connecting & commissioning thelightpoints with 3 Runs of 1.5 Sq.mm. PVC insulatedmultistranded Copper Conductor wires (One each for Phase, Neutral and earth) in 1.6mm. thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc., including supplying and fixing 6 AMPSSwitchin manufacturers mounting box fixed flush with the wall /Partitions.The maximum length will be 10.0 Mtrs. from switch board to first light point.LIGHT POINT WIRING- but for Exhaust Fan points. |
| 339 | Supplying, wiring, connecting and commissioning the light points with 3 Runs of 1.5 Sq.mm. PVC insulated multistranded FRLS Copper Conductor wires (One each for Phase,Neutral and Earth) 1.6mm. thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc.,for CIRCUIT MAINS |
| 340 | Supplying, wiring,connecting & commissioning 3 Runs of 1.5 Sqmm. PVC insulated multi stranded copper conductor FRLS Wires (one each for Phase, Neutral and earth) in 1.6mm. thick MS Conduits laid in wall / Partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc., for EMERGENCY LIGHT POINT WIRING |
| 341 | Supplying and fixing 1 x 6 AMPS Switch with combined in Manufacturer"s mounting box fixed flush with the wall, including all materials, labour cahrges, transportation, loading & unloading charges, etc. for EMERGENCY LIGHT POINT WIRING |
| 342 | Supplying,connecting & commissioning of Occupancy sensors fixed on the false ceiling with all necessary accessories required for the job, including labour charges, transportation, loading & unloading charges, etc.(in Main toilets as well as toliets in closed cabin areas) -OCCUPANCY SENSORS |
| 343 | Supplying, laying, connecting and commissioning3 Runs of2.5 Sq.mm PVC Insulated multistranded copper conductor FRLS wires (One each for Phase, Neutral and earth)wires for continuous earthing inalready laid Heavy Duty PVC Conduits laid in floor/partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc., - UPS WIRING |
| 344 | Supplying, fixing, connecting & commisioning2 x 6 Amps Universal UPS Sockets with 1 x 16 Amps Switch housed in Manufacturer"s mounting box fixed flush with the wall (or) on partitions with necessary accessories such as screws bolts & nuts, other required materials, labour charges, transportation, loading & unloading charges, etc., |
| 345 | Supplying, fixing, connecting & commisioning3 x 6 Amps Universal UPS Sockets with 1 x 16 Amps Switch housed in Manufacturer"s mounting box fixed flush with the wall (or) on partitions with necessary accessories such as screws bolts & nuts, etc. |
| 346 | Supplying, fixing, connecting & commisioning1 x 6/16 Amps Universal UPS Sockets with 1 x 16 Amps Switch housed in Manufacturer"s mounting box fixed flush with the wall (or) on partitions with necessary accessories such as screws bolts & nuts, other required materials, labour charges, transportation, loading & unloading charges, etc., |
| 347 | Supplying, laying, connecting & commisioning of1 x 6 Amps Universal UPS Socket with one No. 6 Amps switch housed in Manufacturer"s mounting box fixed flush with the wall (or) on partitions with necessary accessories such as screws bolts & nuts, other required materials, labour charges, transportation, loading & unloading charges, etc., |
| 348 | Supplying, laying, connecting and commissioning 2 Runs of 4 Sq.mm. PVC Insulated multistranded copper conductor FRLS wires (One each for Phase, Neutral) with 1 Runof 2.5 Sqmm. PVC Insulated multistrandedFRLS copper conductor wires for continuousearthing in already laid Heavy Duty PVC Conduits laidin floor/partitions or laid in open fashion above false ceiling with necessary clamps, screws,other required materials, labour charges, transportation, loading & unloading charges, etc., |
| 349 | Supplying, laying, connecting and commissioning 2 Runs of6 Sq.mm PVC Insulated multistranded copper conductor FRLS wires (One each for Phase, Neutral) with 1 Run of 2.5 Sq.mm. PVC Insulated multistranded FRLS copper conductor wires for continuous earthing in 1.6 mm thick MS Conduits laid in wall /partitions or laid in open fashion above false ceiling with necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc.,from DB to Server sockets. |
| 350 | Supplying, laying of 25mm. dia. MS Conduits laid in floor/concealed in wall with accessories, necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc., |
| 351 | Supplying, laying of 25mm. dia. Heavy duty PVC Conduits laid in floor/concealed in wall with accessories, necessary clamps, screws, other required materials, labour charges, transportation, loading & unloading charges, etc., |
| 352 | Supplying, laying of 25 mm. dia PVC flexible hose laid in partitions with necessary supports clamps, screws,other required materials, labour charges, transportation, loading & unloading charges, etc., |
| 353 | Supplying, fixing, connecting & commissioningMSBase box for Data with necessary screws, other required materials, labour charges, transportation, loading & unloading charges, etc.,The Data Socket with front plate shall be in your scope. - DATA/VOICE/WIFI WIRING |
| 354 | Supplying, fixing, connecting & commissioningPVC Base box for Data with necessary screws etc.,The Data Socket with front plate shall be in your scope.- DATA/VOICE/WIFI WIRING |
| 355 | Supplying, fixing, connecting & commissioningMSBase box for Voice with necessary screws etc.,The Data Socket with front plate shall be in your scope. |
| 356 | Supplying, fixing, connecting & commissioningPVC Base box for Voice with necessary screws etc.,The Data Socket with front plate shall be in your scope. |
| 357 | Supplying,Laying,connecting & commissioning of CAT 6E data cable with necessary accessories required for the job. (For Data & Voice) |
| 358 | Supplying,laying of 32mm. dia PVC Conduits laid in floor/concealed in wall/partitions with accessories, necessary clamps, screws etc., |
| 359 | Supplying,laying of 32mm. dia PVC flexible hose laid in partitions with necessary supports clamps, screws etc., |
| 360 | Supplying, laying,connectingthe Aluminum Raceways laid in the Floor with all necessary clamp, screws etc., FORDATA & VOICE - ALUMINUM RACE WAYS- 40 x 40 mm. |
| 361 | Supplying, laying,connectingthe Aluminum Raceways laid in the Floor with all necessary clamp, screws etc., FORDATA & VOICE - ALUMINUM RACE WAYS- 60 x 40 mm. |
| 362 | Supplying, laying,connectingthe Aluminum Raceways laid in the Floor with all necessary clamp, screws etc., FORDATA & VOICE - ALUMINUM RACE WAYS- 100 x 40 mm. |
| 363 | Supplying, erecting 14G thick Junction boxeswith cover of 50 mm. height to suit as per site conditions.The Junction boxes shallbe powder coated type and fixed flush with the wall/floor.- JUNCTION BOXES |
| 364 | Cutting, breaking and removing debris andplastering with chicken mesh for floor raceways -FLOOR CUTTING- 0" -6" |
| 365 | Cutting, breaking and removing debris andplastering with chicken mesh for floor raceways -FLOOR CUTTING-6.1" - 12 " |
| 366 | Cutting, breaking and removing debris andplastering with chicken mesh for floor raceways -FLOOR CUTTING-12.1" - 18 " |
| 367 | Supplying, installing and connecting a Copper plateof size 600mm.x 600 mm.x 6 mm.ata depthof 3000 mm. in an earth pit of700x 700 x 3500 mm. filled with salt andcharcoal mixed with sand in alternate layers 150mm. each upto a height of 3000 mm. frombottom.Two copper flats of 25 x 6mm. shall be braced to this copper plate throughout the overlaping length with the copper plate and brought to the surface of the earthpit. This copper flat shall have provision for connecting wires of flats as the case may be.A suitable size of 40 mm. dia GI Pipe shall be provided uptil the bottom of the earth pit.This GI Pipe shall have provision for watering through a funnel. Amasonary strucutre shall be constructed to a depth of 450mm. and a heavy dutyCI Cover shall be used to cover the pit. The cost of digging and back filling shallalsobe included.Sand,salt and charcoal are in the Contractor"s scope.(30KVA UPS neutral - 1 no.; SERVER - 1 no. ; EPABX - 1 no.) -EARTHING |
| 368 | Supplying,installing and connectinga3.0 Mtr. long 40 mm.dia G.I. Pipe withholes drilled diametrically opposite toeach other once every 150 mm. in an earth pit of380x 380 x 3500 mm. filled with salt andcharcoal mixedwith sand in alternate layers 150mm. eachuptoa height of 3000 mm.from bottom. The pipe shall have provisionforwateringthrougha funnel.Itshall also haveprovision for connecting 50 x6mm. G.I. Flatontwo sides. Amasonary strucutre shall be constructed to a depthof 450mm. and a heavy dutyCI Cover shallbe usedto cover thepit. The cost of digging andback filling shall also be included.Sand,salt and charcoal arein the Contractor"sscope. (LT Panels - 2 nos.)- EARTHING |
| 369 | Supplying, laying and connecting 25 x 6 mm. GI Flat laid in open fashion with necessary clamps,screws, interlinks etc., |
| 370 | Supplying,laying and connecting16 Sq.mm.PVC Insulated copper conductor wires laid inopenor enclosed in heavy duty PVC Conduits for 30 KVA UPS Neutral earthing. |
| 371 | Supplying,laying and connecting10 Sq.mm.PVC Insulated copper conductor wires laid inopenor enclosed in heavy duty PVC Conduits withnecessaryclamps,screws,interlinksetc., for SERVER RACK & EPABXearthing. |
| 372 | Supplying,laying and connecting6 Sq.mm.PVC Insulated copper conductor wires laid inopenor enclosed in heavy duty PVC Conduits withnecessaryclamps,screws,interlinksetc., for SERVER RACK & EPABX earthing. |
| 373 | Supplying,laying and connecting 500mm. long 25 x 6 mm. GI Flat in open fashionwith necessary clamps, screws, etc., as earth link. |
| 374 | Supplying, laying and connecting200mm.long25 x 6 mm.. cu Flat with SMC insulator in open fashionwith necessary clamps, screws, etc., as earth link. |
| 375 | Supplying,laying,connecting & commissioning 8 SWG bare enamelled copper wire with necessary clamps,screws etc., |
| 376 | Supplying,laying,connecting & commissioning 10 SWG bare enamelled copper wire with necessary clamps, screws etc., |
| 377 | Supply of IP20 recess round LED downlighter compatible with system wattage not more than 13.5W and luminaire lumens not less than 1500 lumens. The system efficacy shall be > 110 lm/W. The housing shall be die-cast aluminium with diffused optics with polycarbonate diffuser for better distribution of light.LED make: that satisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of > 150lm/W,Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI > 80, Life of LED as per L70 > 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<10%, Power factor>0.95, Inbuilt Surge protection in CM = 2.5KV, LED Driver with Voltage range 150-270V AC andSafety Extra Low Voltage Safe level<60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Driver shall be potted driver with three terminals of P,L,E and both driver and luminaire shall be BIS compliance.(Make: Philips) - LIGHT FITTINGS (SUPPLY AND ERECTION ONLY) |
| 378 | Supply of IP20 recess round LED downlighter compatible with system wattage not more than 10.5W and luminaire lumens not less than 1200 lumens. The system efficacy shall be > 110 lm/W. The housing shall be die-cast aluminium with diffused optics with polycarbonate diffuser for better distribution of light.LED make: that satisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of > 150lm/W,Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI > 80, Life of LED as per L70 > 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<10%, Power factor>0.95, Inbuilt Surge protection in CM = 2.5KV, LED Driver with Voltage range 150-270V AC andSafety Extra Low Voltage Safe level<60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Driver shall be potted driver with three terminals of P,L,E and both driver and luminaire shall be BIS compliance.(Make: Philips) |
| 379 | Supply of IP20 recess LED 2X2 feet compatible with system wattage not more than 30W and luminaire lumens not less than 3600 lumens. The system efficacy shall be > 115 lm/W.The housing shall be CRCA housing with diffused optics with PS diffuser for better distribution of light. LED make: that satisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of > 150lm/W,Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI > 80, Life of LED as per L70 > 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<10%, Power factor>0.95, Inbuilt Surge protection in CM = 4KV, LED Driver with Voltage range 150-270V AC andSafety Extra Low Voltage Safe level<60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Driver shall be potted driver with three terminals of P,L,E and both driver and luminaire shall be BIS compliance.(Make: Philips) |
| 380 | Supplying, fabricating, erecting, connecting & commissioning of the Ladder type GI CableTrays with necessary Angle irons for cable supports andother allied fabrication works.Fixing toconcrete surfaces shall be done with the helpof expandabletypeanchor fastners capableofbearinga weightof500Kgs. Fixingtobrickwalls shallbedonewith grouting.The distance between twosupports shall be 2000 mm. Thematerials and labourfor grouting,cablesupportsandProvision for fixing allied fabricationwork shallsupplied by the contractorwith provision for fixingGI flats Throughout with connection point once everymtrs. on both sides all supports shall be with threaded rods once every 1500mm. CABLE TRAY- 450mm. (w) x 50mm. (H) x 1.5mm. Thickness |
| 381 | Supplying, fabricating, erecting, connecting & commissioning of the Ladder type GI CableTrays with necessary Angle irons for cable supports andother allied fabrication works.Fixing toconcrete surfaces shall be done with the helpof expandabletypeanchor fastners capableofbearinga weightof500Kgs. Fixingtobrickwalls shallbedonewith grouting.The distance between twosupports shall be 2000 mm. Thematerials and labourfor grouting,cablesupportsandProvision for fixing allied fabricationwork shallsupplied by the contractorwith provision for fixingGI flats Throughout with connection point once everymtrs. on both sides all supports shall be with threaded rods once every 1500mm. CABLE TRAY 300mm. (w) x 50mm. (H) x 1.5mm. Thickness |
| 382 | Supplying,erecting and connecting a 5 KG FIRE EXTINGUISHER properly fixed on thewallwith necessary clamps, screws, bolts and nuts etc.,The extinguisher shall be suitablefor all types of fires. (A,B & C). SAFETY EQUIPMENTS |
| 383 | Supplying,erecting and connectingTreatmentChart in English and Tamil directly fixedontothewall with necessary screws etc., |
| 384 | Supplying 440V Gloves |
| 385 | Supplying, and laying 2000 mm. x 1000 mm. x 2mm. thick ISI Marked Neoprene mats to be laid in front of the Panel Boards. |
| 386 | Supplying and fixing 440V Danger Board. |
| 387 | Supply of First Aid Box |
| 388 | Liasion with The Chief Electrical Inspector to Govt. of Tamilnadu for preparation of Working drawings etc., obtaining approval for drawing,Safety Certificate approval for Energisiation. |
| 389 | Preparation of "As Built Drawings" and submission of 3 Sets of hard copies and 1 Set of soft copy for Internal Electrical network system, after completion of work. |
| 390 | Furniture Items |
| 391 | Conference Table - 8"6" x 4"0"x 2"6" (LIBERTY) : Supplying of Conference Table with 36mm prelam table top with necessary wire management system with mix of metal powder coated legsand prelam board ofdesign as per drawings, rate includes all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 392 | Conference Hall Chair : Supplying & placing of Leatherette chair (Sofee L/B)of Low Back , Leatherette Seat & Back , Gaslift, Centre-Tilt Mechanism, Chrome platedArms & Base. The rate should include all materials, lead and lift,cleaning,all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 393 | Consultant & Cabin Table- 7"0" x 2"0" x 2"6"with side table - 3"0" x 2"6" x 2"6" (VIVA 50/75 T SHAPE) : SupplyingandFixingofcubicleTables with7"0" x 2"0" x 3"6"cubicle with 50mm aluminuim powder coated 50mm thick partition with 3"6" full height, at 2"6" table top and 1" is writing board/magnetic board or 8mm frosted glass vertical .And the table will have one number of pedestal three drawer storage with master key arragement.Complete with all hardwares etc. Keyboard and CPU trolly has to be supplied. Hardware is of Ebco/Hetich complete as per drawings, including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 394 | Consultant & Cabin Chair : Supplying & placing of Mesh chair (Rover M/B) of Medium Mesh Back Chair, Cushioned Seat, Adjustable Lumbar Support, Gaslift, Synchro Mechanism, Adjustable Arms, Nylon Base. The rate should includes all materials, lead and lift,cleaning,labour charges, loading, unloading, transportation, etc. complete as per drawing and as directed by the departmetnal officers. |
| 395 | Consultant & Cabin Table- 4"6" x 2"0" x 2"6"with side table - 2"9" x 1"6" x 2"6"(CRYSTAL ST) : Supplying of Table with 1350 mmx 600mm x 750mm with 25mm prelaminated top and sides and side unit of size 830mm 450mm x 700mm.And the table will have one number of pedestal three drawer Size 400W x 450D x 640ht storage with master key arragement.Complete with all hardwares etc. Wire Management , Keyboard tray and CPU trolly to be supplied. Hardware will be of Ebco/Hetich brand, complete as per drawings.Rate includes all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 396 | Consultant & Cabin Chair : Supplying & placing of Mesh chair (Ergo M/B) of Medium Mesh Back Chair, Cushioned Seat, Adjustable Lumbar Support, Gaslift, Synchro Mechanism, Adjustable Arms, Nylon Base. The rate should includes allrequired materials, lead and lift,cleaning, labour charges, loading, unloading, transportation, etc. complete as per drawing and as directed by the departmental officers. |
| 397 | Assistant Planner Table - 4"6" x 2"0" x 2"6"with side table - 2"9" x 1"6" x 2"6"(IMPACT WS) : Supplying of Table with 1350 mmx 600mm x 750mm with 25mm prelaminated top and sides and side unit of size 830mm 450mm x 750mm.And the table will have one number of pedestal three drawer Size 530W x 450D x 700 ht storage with master key arragement.Frontand Side modesty panel is provided with 50mm thick partition of 3"6" full height, at 2"6" table top and 1" is writing board/magnetic board or 8mm frosted glass vertical . Complete with all hardwares etc. Wire Management , Keyboard tray and CPU trolly to be supplied. Hardware will be of Ebco/Hetich brand,including all required materials, labour charges, loading, unloading, transportation, complete as per drawings and as directed by the departmental officers. |
| 398 | Assistant Planner Table - 21 Sft - T table (IMPACT WS -T SHAPE):SupplyingandFixingofcubicleTables with7"0" x 2"0" x 3"6"cubicle with 50mm aluminuim powder coated 50mm thick partition with 3"6" full height, at 2"6" table top and 1" is writing board/magnetic board or 8mm frosted glass vertical .And the table will have one number of pedestal three drawer storage with master key arragement.Complete with all hardwares etc. Keyboard and CPU trolly has to be supplied. Hardware is of Ebco/Hetich.Complete as per drawings.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 399 | Conference Hall Table - 20"0" x 7"0"x 2"6": Supply & Fixing of Table top 36mm thick pre laminated particle board with 2mm edge lipping finish, Understructure : Supported on MS powder coated legs & supporting MS Beams and pre laminated board. Flip up & cable dump is Provided by pre laminated particle board. The rate should included debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 400 | Conference Hall chair : Supplying & placing of Low Back chair (IND ZUDY HB), Leatherette Seat & Back, Gaslift, Centre-Tilt Mechanism, Chrome platedArms & Nylon Base. The rate should include Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 401 | Drawing Room Table - 5"0" x 3"0" x 2"6"(MARSHALL): Supply & Fixing of Table top25mm thick pre laminated particle board with 2mm edge lipping finish, under structure MS 40 x 20 mm leg with powder coated, crossbar square ms tube with powder coated. Wire entry post is Provided is given in between legs.Flip up & cable dump is Provided by pre laminated particle board to be provided in the center of the table. The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing. including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 402 | Drawing Room chair : Supplying & placing of chair (Eva M/B),Mesh Back Chair, Medium Back, Cushioned Seat , Adjustable Lumbar Support, Synchro Mechanism, Gaslift, Adjustable Arms, Nylon Base. The rate should include Materials lead and lift,cleaning, etc. complete as per drawing. including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 403 | DP cabin table - 5"0" x 2"0" x 2"6" with Side table - 2"9" x 1"6" x 2"3" & Pedestal unit - 1"4" x 1"6" x 2"2" (CRYSTAL PD ) : Supply & Fixing of Table top: 25mm thick Pre-laminate particle board finished with 2mm pvc,edge banding. Back: 6mm Thk pre laminated particle board with 2mm PVC edge lipping. Side/Shutters: 18mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping. Handle: Finger groove handle Lock: Regular lock. Side Unit : Top 18mm Thk pre laminated particle board. Back: 6mm Thk pre laminated particle board with 2mm PVC edge lipping. Side/Shutters: 18mm Thk pre laminated particle board. Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle. Lock: Regular lock. PEDESTAL 2D + 1F : Size 400W x 450D x 640ht, made of 18mm thick pre laminated particle board, single multi lock, D handle.The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing. including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 404 | DP Cabin chair : Supplying & placing of Chair (ERGO HB ), Mesh Back with Headrest, Cushioned Seat, Multilock Mechanism, Gaslift, Fixed Arms , Chrome Base. The rate should include Materials lead and lift,cleaning, etc. complete as per drawing. including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 405 | Fabric Sofa :Sofa Seating with 18mm plywood base and sides with proper supports of MR grade and with Spring and nylon belts for the cushion support and cushion density 32kg/m2 of 4" thickness at Reception. The sofa is upholstered with fabric finish. The rate is inclusive of supply, fixing and transportation. The sofa should be supported with steel legs.(Basic cost of fabric is Rs 150/m). complete as per drawingincluding all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 406 | Member Secretary Room Sofa - 3 seater - 6"0" x 2"0" (Milo 3S) |
| 407 | Member Secretary Room Sofa - 2 seater - 4"0" x 2"0" (Milo 2S) |
| 408 | Senior Planner Sofa - 2 seater - 4"0" x 2"0" (Milo 2S) |
| 409 | Chief Planner Sofa - 2 seater - 4"0" x 2"0" (Drone - 2S) |
| 410 | Chief Planner Sofa - 1 seater - 2"0" x 2"0" (Drone - 1S) |
| 411 | Foyer Sofa 3-seater (Quincy- 3S) |
| 412 | Chief Planner Lounge Room Sofa 2-seater - 4"0" x 2"0" (Drone - 2S) |
| 413 | Membe Secretary Lounge Room - 3 seater - 6"0" x 2"0" (Drone 3 Seater ) |
| 414 | Lounge Room Sofa - 1 seater - 2"0" x 2"0" (Drone - 1S) |
| 415 | Member Secretary Outer Room - 3 seater - 6"0" x 2"0" (Drone 3 Seater ) |
| 416 | Leatherette Sofa : supply and fixing of sofa with MS frame for base, SS legs, wooden frame with Foam and fabric, The Sofa Base made of MS Powder coated tube section of size 3"×1"fixed on the SS legs of 2" dia of 8" ht @ 4nos with Rubber base bottom, The 6mm tk Hard board screwed on the Frame work , The wooden Frame work to be made for seating and backrest of using Pine wood of size 1.5"x1.5" tk , The Frame work back and bottom shall be fixed with 6mm commercial plywood and inner area wrapped with nylon belts, The 40 density of 3" tk foam shall be placed over the Nylon belts and finally 12mm foam wrapped it and finished with PU fabric of approved color, it includes necessary hardwares etc., as per drawing. ( Basic cost of fabric - Rs 325/M )including all materials, labour charges, loading, unloading, transportation, etc. complete. Waiting Lounge Sofa - 2 seater - 4" x 2" (Milo 2S) |
| 417 | SIDE TABLE- 1"7" x 1"7"x1"6": Supply & fixing of Coffee Table made with 19mm Thick Prelaminated Board Top and Base should be Chrome plated Legs as per Drawingincluding all materials, labour charges, loading, unloading, transportation, etc. complete. Waiting Lounge Side table - 1"7" x 1"7" |
| 418 | Member Sec Room Coffee table - 3"4" dia, Ht-1"6" : Supply & fixing of Coffee Table made with 19mm Thick Prelaminated Board Top and Base should be Chrome plated Legs as per Drawingincluding all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 419 | COFFEE TABLE - 3"6" x 1"9" x 1"6": Supply & fixing of Coffee Table made with 19mm Thick Prelaminated Board Top and Base should be Chrome plated Legs as per Drawingincluding all materials, labour charges, loading, unloading, transportation, etc. complete. Lounge Coffee table - 3"6" x 1"9" |
| 420 | GIS Workstation - 3"6" x 2"x 4": Supply and fixing of Table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure : Gable end 18mm thick pre laminated particle board with 0.8 edge band .BTT18 mm THK prelaminatedboard raceway for electrical point & data net workingis provided. Above table top main spain privacy 8 mm thick laminated, glass marker fixed withglass holder provided, The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 421 | GIS Workstation - 2"9" x 2" x 4": Supply & fixing of Table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure : Gable end 18mm thick pre laminated particle board with 0.8 edge band. BTT18 mm THK prelaminatedboard raceway for electrical point & data net workingis provided. Above table top main spain privacy 8 mm thick laminated, glass marker fixed withglass holder provided, The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing .including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 422 | GIS Workstation - 5"0" x 2"x 4": Supply & fixing of Table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure : Gable end 18mm thick pre laminated particle board with 0.8 edge band. BTT18 mm THK prelaminatedboard raceway for electrical point & data net workingis provided. Above table top main spain privacy 8 mm thick laminated, glass marker fixed withglass holder provided,The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing |
| 423 | GIS Workstation - 6"0" x 2"x 4": Supply & fixing of Table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure : Gable end 18mm thick pre laminated particle board with 0.8 edge band . BTT18 mm THK prelaminatedboard raceway for electrical point & data net workingis provided. Above table top main spain privacy 8 mm thick laminated, glass marker fixed withglass holder provided, The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 424 | GIS Workstation - 3"9" x 2"x 4": Supply & fixing of Table top 25mm thick pre laminated particle board with 2mm edge lipping finish, under structure : Gable end 18mm thick pre laminated particle board with 0.8 edge band. BTT18 mm THK prelaminatedboard raceway for electrical point & data net workingis provided. Above table top main spain privacy 8 mm thick laminated, glass marker fixed withglass holder provided, The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawingincluding all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 425 | Senior Planner Computer Table - 4"6" x 2" x2"6(FST TABLE): Supply & fixing of Table top made of 25mm thick prelaminated particle board with 2mm thick PVC Edge banding , Gable end & modesty panel made of 18mm thick prelaminated particle board with 2mm thick PVC edge banding. Drawer Unit with telescopic channel. Provision for storing files with Door. Fixed Wooden Footrest. The rate should included debris clearing, Materials lead and lift,cleaning, etc. complete as per drawingincluding all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 426 | DP Cabin Computer Table - 5"0" x 2" x 4" (FST TABLE): Supply & fixing of Table top made of 25mm thick prelaminated particle board with 2mm thick PVC Edge banding , Gable end & modesty panel made of 18mm thick prelaminated particle board with 2mm thick PVC edge banding. Drawer Unit with telescopic channel. Provision for storing files with Door 5feet fixed Wooden Footrest. The rate should included debris clearing, Materials lead and lift,cleaning, etc. complete as per drawingincluding all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 427 | Chief Planner Computer Table - 3"6" x 2" x 2"6" (FST TABLE ): Supply & fixing of Table top made of 25mm thick prelaminated particle board with 2mm thick PVC Edge banding , Gable end & modesty panel made of 18mm thick prelaminated particle board with 2mm thick PVC edge banding. Drawer Unit with telescopic channel. Provision for storing files with Door. Fixed Wooden Footrest. The rate should included debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. 1050L x 600W x 750Hmm |
| 428 | Reception Table - 6"0" x 2"0" x 2"6" With Side Table - 3"6" x 1"3" x 2"6" (IMPACT ST ): Supply & fixing of Table top main 25mm thick pre laminated particle board with 2mm edge lipping finish,. Under structure : Gable end 25mm thick pre laminated particle board with 0.8 edge band .Below main spain of the table top 18mm thick Modesty pre laminated particle board is provided. Above table top main spain flip up & cable dumpis Provided . Side storage : Made of18mm Thick particle board side,door,bottom & skirting, back sheet std white 9mm thick, top 25mm thick pre laminated particle board. The rate should included debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 429 | Member Secretary Table - 9"6" x 2"0" x 2"6" & side unit - 4"0" x 2"0" x 2"6" - L shape (FST TABLE ): Supply & fixing of Table top: 25mm thick Pre-laminate particle board finished with 2mm pvc edge banding. Main Screen : 8mm Thk Sandwich Colored Glass screen supported on Studs. Under-structure : Supported on MS powder coated Perform leg with supporting beams. Side Unit : Top 18mm Thk pre laminated particle board. Back: 6mm Thk pre laminated particle board with 2mm PVC edge lipping. Side/Shutters: 18mm Thk pre laminated particle board. Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle. Lock: Regular lock. PEDESTAL 2D + 1F : Size 400W x 450D x 640ht, made of 18mm thick pre laminated particle board, single multi lock, D handle.The rate should included debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 430 | Member Secretary Chair : Supplying & placing ofchair (LINEA M/B) of Medium Back Chair, Mesh Back , Cushioned Seat, Gaslift, Adjustable Lumbar Support, Synchro Mechanism, Adjustable Arms, Nylon Base .The rate should include Materials lead and lift,cleaning, etc. complete as per drawing. including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 431 | Senior Planner & Chief Planner Table - 7"0" x 2"0" x 2"6" & side unit - 3"3" x 1"6" x 2"6" - L shape (FST TABLE ): Supply & fixing of Table top: 25mm thick Pre-laminate particle board finished with 2mm pvc edge banding. Main Screen : 8mm Thk Sandwich Colored Glass screen supported on Studs. Under-structure : Supported on MS powder coated Perform leg with supporting beams. Side Unit : Top 18mm Thk pre laminated particle board. Back: 6mm Thk pre laminated particle board with 2mm PVC edge lipping. Side/Shutters: 18mm Thk pre laminated particle board. Edge: All exposed area with 2mm thick PVC edge lipping Handle: Finger groove handle. Lock: Regular lock. PEDESTAL 2D + 1F : Size 400W x 450D x 640ht, made of 18mm thick pre laminated particle board, single multi lock, D handle.The rate should included debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing. including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 432 | Senior Planner & Chief Planner Chair : Supplying & placing ofchair (LINEA H/B) of Medium Back Chair with Headrest, Mesh Back , Cushioned Seat, Gaslift, Adjustable Lumbar Support, Multilock Mechanism, Adjustable Arms, Nylon Base .The rate should include Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 433 | Member Sec Outer Room Table - 4"6" x 2"0" x 2"6" with side table - 2"9" x 1"6" x 2"6" (IMPACT WS) : Supplying of Table with 1350 mmx 600mm x 750mm with 25mm prelaminated top and sides and side unit of size 830mm 450mm x 750mm.And the table will have one number of pedestal three drawer Size 530W x 450D x 700 ht storage with master key arragement.Frontand Side modesty panel is provided with 50mm thick partition of 3"6" full height, at 2"6" table top and 1" is writing board/magnetic board or 8mm frosted glass vertical . Complete with all hardwares etc. Wire Management , Keyboard tray and CPU trolly to be supplied. Hardware will be of Ebco/Hetich brand. Complete as per drawings.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 434 | Table - (FST TABLE ): Supply & fixing of Table top made of 25mm thick prelaminated particle board with 2mm thick PVC Edge banding ,Gable end & modesty panel made of 18mm thick prelaminated particle board with 2mm thick PVC edge banding. Drawer Unit with telescopic channel. Provision for storing files with Door . Fixed Wooden Footrest. The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 435 | 5"0" x 2"0"x2"6" - (Personal Clerk for SP) |
| 436 | 5"6" x 2"0"x2"6"-(Personal Clerk for DP-1,2 & 3) |
| 437 | 6"0" x 2"0"x2"6" -(Junior Assistant, Assistant & Super indent) |
| 438 | Attender Chair : Supplying & placing of Mesh chair (Rover M/B) of Medium Mesh Back Chair, Cushioned Seat, Adjustable Lumbar Support, Gaslift, Synchro Mechanism, Adjustable Arms, Nylon Base. The rate should include Materials lead and lift,cleaning, etc. complete as per drawing. including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 439 | Plotter Printer Scanner Table - 16"6" x 2"10"x2"6" (FST TABLE ): Supply & fixing of Table top25mm thick pre laminated particle board with 2mm edge lipping finish, under structure MS 40 x 20 mm leg with powder coated, crossbar square ms tube with powder coated. Wire entry post is Provided is given in between legs. The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing.including all materials, labour charges, loading, unloading, transportation, etc. complete. Overall Size :4980 MMX 900MM X 750 MM |
| 440 | Drawing Storing Rack 6 feet Ht Storage: Supply & fixing of Drawing Storing Rack 6 feet Ht below the Plotter Table - 4" x 3" Storage18mm Thick particle board side,door,bottom & skirting, back sheet std white 9mm thick, top 18mm thk . The rate should includedscaffolding , debris clearing, Materials lead and lift,cleaning, etc. complete as per drawing note: storage in sqr feet rate Size :- 1200 X 900 MM X 1800 MM Ht.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 441 | White Board : Supply and Fixing matt finish 12mm thick laminated white board with aluminum beading alround the perimeter with ms sheet back of white board. Rate shall include for supplying magnetic strips, magnetic dry marker, spare felt for eraser,board fixing clips etc. as per drawing and instruction.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
| 442 | Soft Board : Supply and Fixing matt finish 12mm thick soft board with fabric basic cost Rs 200/m with aluminum beading alround the perimeter with ms sheet back of soft board.including all materials, labour charges, loading, unloading, transportation, etc. complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
