|
| 1 | Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 2 | 80 mm dia |
| 3 | 100 mm dia |
| 4 | 150 mm dia |
| 5 | 200 mm dia |
| 6 | 250 mm dia |
| 7 | 300 mm dia |
| 8 | Providing laying, testing & commissioning of \"C\" class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. |
| 9 | 150 mm. Dia |
| 10 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with ronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 11 | 80 mm dia |
| 12 | 100 mm dia |
| 13 | 150 mm dia |
| 14 | 200 mm dia |
| 15 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 16 | 80 mm dia |
| 17 | 100mm dia |
| 18 | 150 mm dia |
| 19 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 20 | Single headed Stainless steel |
| 21 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 22 | Single headed Stainless steel |
| 23 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 24 | 30 mm |
| 25 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 26 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 27 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required |
| 28 | 3 way - 150 mm dia M.S. Pipe |
| 29 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. |
| 30 | Dismantling, rewinding, servicing and refixing of 75 HP capacity main pump set with copper winding wire i/c varnishing, baking, F class insulation paper, Glass Sleev, White Cotton Tape & Solder Wire, Paste, Old Dhoti etc. i/c testing commissioning etc as required. |
| 31 | Repairing /replacement of worn out parts i/c mechanical seal & servicing of Diesel Driven Horizontal type multistage, centrifugal, split casing/main pump with bronze impeller stainless steel shaft, mechanical seal of 75/85 HP Diesel Driven Horizontal type multistage, centrifugal, split casing/main pump i/c dismantling & credit old dismantled material. a) Mechanical Seal Upper & Lower – 2 Setb) New Bearing 2 Nos. – 2 Setc) TPN (Tripping switch) – 2 Nos.d) Nut Bolts, Glow Tube – 2 Sete) Cable Binder – 2 Setf) End Cable Bush – 2 Setg) O ring Set & Gasket Set- 2 Set |
| 32 | Painting with synthetic enamel paint of approved brand & manufacture to give an even shade: a) Two or more coats on new work. |
| 33 | Supplying & fixing of Weather Proof Hose Cabinet of size 900mmX600mmX500mm suitable for external yard hydrant / FBIC fabricated (16 gauge suitable for 2 No. 15mtr. Hose and 1 No. short branch pipe and 1 No. hydrant) out of 1.6 mm thick MS Sheet with 4 mm thick glazed glass door in front having locking arrangements, suitable to accommodate external /internal hydrant with valve, hose reels, branch pipe /FBIC etc. mounted on wall or raised plateform and duly painted with PO Red externally & white internally with synthetic enamel paint etc. complete in all respects as required. |
| 34 | Supplying and Laying of aluminium conductor PVC insulated and PVC sheathed / XLPE armoured power cable, 1.1 KV grade of following size and manner etc as required |
| 35 | 3x35 Sqmm cable on wall surface as required |
| 36 | 3x95 Sqmm cable on wall surface as required |
| 37 | Dismantling, rewinding, servicing and refixing of 7.5 HP capacity main pump set with copper winding wire i/c varnishing, baking, F class insulation paper, Glass Sleeve, White Cotton Tape & Solder Wire, Paste, Old Dhoti etc. i/c testing commissioning etc as required. |
| 38 | Servicing, Overhauling and refixing of 7.5 HP capacity main pump set with copper winding wirei/c varnishing, baking, F class insulation paper, Glass Sleeve, White Cotton Tape & Solder Wire, Paste, Old Dhoti etc. i/c testing commissioning etc as required. |
| 39 | Less Credit Dismantle item such as MS Pipe, Butterfly Valve, NRV, Hydrant, pressure gauge, Air vassal, Hose cabinet,Cable etc |
