Uttar Pradesh Jal Nigam-UPJN has published Invitation Of Rates For Supply Of Rates For Civil, Electrical, Sanitory And Other Materials As Per Bid Document , Electrical, Sanitory & Other Material , Providing M.S. Foot Rests Including Fixing In Manoholes With 20X20x10 Cm Cement Concrete Blocks . Submission Date for this Tender is 10-06-2022. Coats and Jackets Tenders in ayodhya Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | ELECTRICAL, SANITORY & OTHER MATERIAL |
| 2 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar |
| 3 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D.-10- Circular shape 500mm internal diameter |
| 4 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually. |
| 5 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction ofEngineer-in-charge. 150 mm nominal size dia |
| 6 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 7 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 8 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. |
| 9 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 10 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar |
| 11 | Excavating trenches in all kinds ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth, Pipes 80 mm to 300 mmdiameter |
| 12 | a) Inside size 60x60 cm & 90 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. |
| 13 | Constructing of R.C.C. surface drain complete as per standard design: |
| 14 | Drain 300 wide average.Depth 45 cm |
| 15 | Drain 450 wide average.Depth 60 cm |
| 16 | 0.91 M deep with S.F.R.C. grating and frame (heavy duty, HD-20 grade designation)560 mm internal diameter conforming to IS : 12592, total weight of cover and frameto benot less than 182 kg., fixed in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 gradded stone aggregate of 20 mm nominal size) including centering shuttering all complete. (Excavation, footrest and 12 mm thick cement plaster at the external surface shall be paid for separately) |
| 17 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone |
| 18 | Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 19 | Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 20 | Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 21 | Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 22 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 23 | Providing and stacking of Bassia latifolia (Mahua) of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 24 | Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 25 | Providing and stacking of Psidium Guajava (Amrood) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 26 | Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 27 | Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 28 | Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 29 | Providing and stacking of Ficus Racemosa (Goolar) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 30 | Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge. |
| 31 | Providing and stacking of Ficus Virens (Paakad) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge. |
| 32 | Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 33 | Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.. |
| 34 | Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.. |
| 35 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. |
| 36 | Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 37 | Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge. |
| 38 | Providing and stacking of Asparagus sprengeri of height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. |
| 39 | Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. |
| 40 | Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 41 | Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing 2 nos M.S. sheet rings 50 x 0.5 mm fixed with rivets complete in all respects including painting inside and outside of tree guard with: Two or more coats of synthetic enamel paint of approved quality shade over a priming coat |
| 42 | Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. |
| 43 | Supplying and stacking of good earth at site including royalty but including carriage1km (earth measusred in stacks will be reduced by 20% for payment). |
| 44 | Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) |
| 45 | Mixing earth and manure in specified proportion or as directed. |
| 46 | Rough dressing the trenched ground including breaking the clods. |
| 47 | Fine dressing the ground |
| 48 | Spreading ofmixed good earth and manure in specified proportions as above and in required thickness. |
| 49 | Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. |
| 50 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge |
| 51 | Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. |
| 52 | Supply ,installation ,testing and commissioning oftwinkle lites make 3000mm long hybrid decorative pole humberto-h pole with gravity casted cast aluminium base and ripped gi pole pipewith decorative post top lantern "concord" 1270mm long with polycarbonate diffuser in 60w led having lumen output not less than 110lmns/watt with 10kva surge protector designed as per architect in-charge( MAKE- TWINKLE LITE-/-HAVELLS/NERI/JUVAAS/ORIENT/ THOR) |
| 53 | Supply ,installation ,testing and commissioning oftwinkle lites make gate light lantern "concord" 1270mm long with polycarbonate diffuser in 60w led having lumen output not less than 110lmns/watt with 10kva surge protector designed as per architect in-charge( MAKE- TWINKLE LITE-/-HAVELLS/NERI/JUVAAS/ORIENT/ THOR) |
| 54 | Supply ,installation, testing and commissioning oftwinkle lites make 1000mm longdecorative bracket tlb-69-wl with decorative post top lantern "concord" 1270mm long with polycarbonate diffuser in 90w led having lumen output not less than 110lmns/watt with 10kva surge protector designed as per architect in-charge( MAKE- TWINKLE LITE-/-HAVELLS/NERI/JUVAAS/ORIENT/ THOR) |
| 55 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mrn, outer Dia 50 mm inner Dia 25mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of l2 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 20 x 3 C.I. strip, upto switch board (from apron to switch board, the cost ol G.I. strip will be exrra) along with 30 cm square C.l. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 56 | Supply & laying of 25mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 57 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 58 | 6.00 Sqmm 4 Core |
| 59 | 25.00 Sqmm 3.5 Core |
| 60 | 70.00 Sqmm 3.5 Core |
| 61 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides.The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type |
| 62 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN |
| 63 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. |
| 64 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 65 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 66 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. (MAKE- TWINKLE LITE-EQUVALENT IN :-HAVELLS/NERI/JUVAAS/ORIENT/ THOR) |
| 67 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 68 | Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. (Make TwinkleLites/ Neri/Thorn/ Orient Electric) |
| 69 | 30 W |
| 70 | 45 W/40 W |
| 71 | 130 W |
| 72 | Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.(Make TwinkleLites/ Neri/Thorn/ Orient Electric) |
| 73 | 25 W |
| 74 | 40 W |
| 75 | Providing and fixing of signages, modular curved frame technology,of various widths and lengths, to form suggested usages,made of aluminium extruded sections , duly anodised ,all signages shall be provided with 0.6-0.8mm polycarbonate protecting film over the prints, of appropriate size and approved make or Equivalent. |
| 76 | Providing and fixing of signages,customised to the architect"s design,the signage to be made of 10 mm casted clear acrylic sheet duly cut by laser, all text to be of 2 mm thick acrylic duly laser cut, partially housed and pasted on to engraved surface of the text in the clear acrylic base, the 10mm acrylic sheet to be fixed on 25x25mm section of teak wood with help of crafted SS pins, and further fixed to the priscribed location with the help of wooden dowels,and required adhesive,as per drawing. |
| 77 | Providing and fixing prohibition signage,made of aluminium composite panel, and all text and pictograms as screen printed and malamine coated, all fixtures in 304 grade SS, all design as per architects approval. |
| 78 | Providing and fixing of exterior signage, to be fixed on the roof top with the help of MS framework, Signage to be made of MS pipe frame work, cladded with 3mm Aluminium composite panel, duly cut by CNC router, and the letters to be laser cut,10mm casted clear acrylic,inserted in a cut out fitted on 4 mm 040 casted acrylic, the letters front to be 3M day and night electrocut vinyl, The signage shall illuminated with back lit LED, of PHILLIPS/GE make of atleast 5Yrs gurantee, (certificate to be provided, by the makers of LED), complete in all respects |
| 79 | Manufacturing, Providing & Fixing Campus Entrance signage as per design approved by architect & drawing enclosed, letters extruded on 50 mm. thick red sand stone dry cladding over brick column with varying perimeter 750x750 size with 150 mm. high sand stone pedestal with foundation ll complete as per the specification & directions of the architect. |
| 80 | Manufacturing, Providing & Fixing Directional signage - vehicular as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. aluminium plate in dark green enamel properly fixed on 6 mm. thick aluminium sheet 900x150 size fixed over 100-150 diameter aluminium dia cast post/MS Pole placed over 450 diameter sand stone base 1380 high with foundation all complete as per the specification & directions of the architect. |
| 81 | Manufacturing, Providing &Fixing Directional signage - pedestrian type-a as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. aluminium plate in dark green enamel properly fixed on 50 mm. thick red sand stone slab 1200x200 size fixed over 100-150 diameter aluminium dia cast post/MS Pole placed over 2 nos. 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect.) |
| 82 | Manufacturing, Providing & Fixing Directional signage - pedestrian type-b as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. aluminium plate in dark green enamel, properly fixed 100-150 diameter aluminium dia cast post/MS Pole 2 nos. properly fixed on 50 mm. thick red sand stone (i)slab 1200x200 size & (ii)slab 900x300 size placed over 2 nos. 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect. |
| 83 | Manufacturing, Providing & Fixing Directional signage - pedestrian type-c as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. stainless steel plate in dark enamel properly fixed on 50 mm. thick red sand stone 900x200 size placed over 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect. |
| 84 | Manufacturing, Providing & Fixing Directional signage - pedestrian type-c as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. stainless steel plate in dark enamel properly fixed on 50 mm. thick red sand stone 900x200 size placed over 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect. |
| 85 | Providing & fixing of Signages made on Aluminium Sheet by CNC Cutting as per drawing & design Architects Approval including all necessary T&P etc all complete in direction of engineer in charge . |
| 86 | Providing and fixing of MS Gate including moulding, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary MS nuts and bolts complete,with suitable arrangement as per approval of Engineer-in-charge, |
| 87 | Providing and fixing bolts including nuts and washers complete. |
| 88 | Supplying & filling of Cinder asper drawing, design etc all complete in direction of engineer in charge. |
| 89 | Labour rate forfilling of boulder pitching (40-60 Kg) including wire and necessary lead & lift including transportation etc all complete in direction of engineer in charge. |
| 90 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) |
| 91 | Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. |
| 92 | Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Medium shade pigment using 50% white cement and 50% ordinary cement |
| 93 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 94 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. |
| 95 | LABOUR RATE FOR MAKINGfor Trimixing ON CC ROAD WITH COMPLETE T&P |
| 96 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. |
| 97 | Wiring points for Fan /Fresh air fan (light duty exhaust fan )with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. |
| 98 | Wiring points for Plug with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & socketsheet etc.complete in all respects.as directed including matching colour wash. |
| 99 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable inPVC conduitpipe partly concealed including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. |
| 100 | Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in20mm dia heavy duty (2mm thick ) PVC conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. |
| 101 | Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FR PVC Multistand copperearth contunity wire including colour wash etc. complete in all respects. |
| 102 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG MS. Sheet incorporating 10mm dia, M.S. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C roof before concreting along with supply of all materials,labour. T& Petc. required for proper completion of the work. |
| 103 | Supply and fixing of flush/surface mounting distribution boardswith additional metal door without MCBcomplete in all respects.6 Way TPN |
| 104 | Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve, 6 - 32 amps.Cat. A |
| 105 | Supply and fixing of 40/63 Amp MCB(10KA)C Curve, 63 Amp. 4 Pole MCB C Curve-Cat. A |
| 106 | Supply and fixing of power plug with 15 Amp./250 Volt flush type universal switch and 5 pin 15 A/250 Vflush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. |
| 107 | Supply and fixing of power plug with 20 Amp./250 Volt flush type universal switch and 5 pin 20 A/250 Vflush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. |
| 108 | Supply & fixing of single wall bracketon matching M.D.F.E.G.boardbase etc. complete in all required. Cat. AA |
| 109 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. |
| 110 | Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect. |
| 111 | 1 X 22 W CAT-AAA |
| 112 | 2 X 22 W CAT-AAA |
| 113 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect .(Category AAA ) |
| 114 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. |
| 115 | Supply and fixing of 55 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with body with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect. CAT- AAA |
| 116 | Supply &fixingofwater tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 and above protectioncomplete in all respect. |
| 117 | Supply of Ceilling Fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 abd also comply with IS: 1709/1984 with latest amendment. The rate voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball bearing system. |
| 118 | Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 119 | Supply & erection ofA.C 230/250 Volts,50 Hz Wall Mounted fans including providing m.S bolts,mounting frame and other acessories including connections etc.complete as required300mm sweep as per directionof E/I Makebajaj,Cromption or Equivalent. |
| 120 | Supply & fixingof Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in allrespects as per direction and satisfaction of engineer-in-charge.-Cat. A |
| 121 | Supply and fixing of 63 A 415 V metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect . |
| 122 | Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. |
| 123 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. |
| 124 | Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection.The panel sheet structure shall undergo seven tank pre-treatment process before painting.The sheet steel shall be all of 2.2mm thick CRCA sheet.All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers.The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm.The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections.All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable.Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places.The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters.Proper sized cable termination gland plates shall be provided oncable alleys and knockouts for same shall be provided during fabrication stage itself.The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions.A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel.Panel shall be so designed at to have minimum 20% spare feeders/space.Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement.All cable terminations shall be from top.The complete panel shall be fuse less type, for control circuits 2A/6A MCB"s to be used.All bus bars shall be of aluminium, electrolytic grade only.Maximum design density shall not exceed 1 Amps/Sqmm.All bus bars shall be insulated with coloured heat shrinkable PVC sleeved.All bus bar supports shall be non hygroscopic DMC/SMC supports. |
| 125 | The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mmPhase to neutral-minimum 15mma) 63 AMP TNP-2 NOS. |
| 126 | OR outgoing as per site requirment |
| 127 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. |
| 128 | a) for 100mm dia pipe. |
| 129 | b) for 75mm dia pipe. |
| 130 | Providing & fixingcast iron coller. |
| 131 | a) 100mm dia. |
| 132 | b)75mm dia. |
| 133 | Providing & fixing upvc SWR bend confirming to IS -14735 |
| 134 | 110mm dia |
| 135 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 136 | a) 100mm |
| 137 | b) 75mm |
| 138 | Providing and fixing centrifugaly cast iron single equal plain junction of required degree. |
| 139 | 100x100x100mm |
| 140 | 75x75x75mm |
| 141 | Providing and fixingcast iron terminal guard. |
| 142 | 100 mm |
| 143 | 75 mm |
| 144 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 145 | Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with PremiumAcrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge. |
| 146 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 147 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm |
| 148 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 200x10 mm |
| 149 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100 mm |
| 150 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 151 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. |
| 152 | Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable in heavy gauge rigid steel conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 14 S.W.Gcopper earth continuity wire&piano typeswitchetc. complete in all respects. |
| 153 | Same as in item no. 1 but for fan. and light duty exhaust fan |
| 154 | Same as in item no. 1butfor 5ampplug point with piano type switch & socket etc. |
| 155 | Add for light / fan points with modular type switches in place of piano type switches |
| 156 | Add for plug point with modular switch & socket in place of piano type switch & socket |
| 157 | Supply & fixing of power plugwith20amp 250 volts flush type modular switchand 5 pin 20 amp 250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of work |
| 158 | MAINS & SUBMAINS- Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugerigid steel coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete withone no. 14 SWGcopperearth continuity wire complete in all respects. |
| 159 | 2 x 4 sq. mm.In 20 mm dia conduit. |
| 160 | 2 x 10 sq. mm.In 25 mm dia conduit. |
| 161 | S/F of surface / flush mounting SPN Distribution board (Legrand Lexic) without MCB complete in all respects as directed at site by Engineer-in-charge. 12 WAYS |
| 162 | Supply & fixingof 6/10/16/20/25/32 amp. SP MCB (10 KA) (Legrand Lexic) |
| 163 | S/F of 40 Amp DP MCB (10 KA)(Legrand Lexic) |
| 164 | S/F of sheet steelenclosure for DP / TP / FP MCB with neutral link and earth terminal. |
| 165 | Supply&burryingof 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnelforwatering and one earthing lead ofno. 8SWGG.I. wirein 15 mm dia. GI pipe uptoswitch board (from apron to switch boardthecost of GI pipe & GI wire willbeextra)300mm square C.I. box with hinged cover,masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . |
| 166 | Supplying & Laying of one number 8 SWG G. I. wirein 15 mm. dia. G. I.pipefor earthing, laidin groundor inwall duly concealedincludingthecostofcement, sand, labour, T&Pandothermaterial required for proper completion ofthework as directed at site. |
| 167 | Supply andlayingofISI marked aluminiumconductor PVC / XLPE insulated armoured,served,sheathed cable 1100volts gradeat 750mmbelow ground level overacushion of 75 mm thick sand around & protected with brick onsides & top on surfacethecablerunshallbe fixed on M.S. clamps etc. of suitablesize completeinallrespect. The armouring of the cable shall be properlyconnectedwith the earth conductor by clamps etc. 10 sqmm 2core |
| 168 | Supplyfixing of plam orpintypecopper tin plated cable socket (lug) tothecable leads, insulating with tapeand making connections etc. complete in all respects as per direction of Engineer-in-charge. 10 sq.mm. |
| 169 | Supply andfixing brass nickle plated compression glandsfor PVC insulated armoured,served,sheathed cable including rubber ring etc.completeinallrespect. The armouring of the cable shall be properlyconnectedwith the earth conductor. 10 sqmm 2core |
| 170 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. |
| 171 | Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. |
| 172 | Supply & fixing of recess/surface/ pendent mounting round10 to 15 watt LED Down lighter having powder coated die cast aluminium housing with heat silk, diffuser/ reflector and driver set complete in all respect. |
| 173 | Supply & fixing ofLED tube light with batten suitable for upto 1x22 watt LED tube light fittings including tube on surface complete in all respect Cat- AAA |
| 174 | Supply & fixing of recess/ surface mounting round 24 watt to 32 watt LED down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / Reflector and driver set completed in all respect. |
| 175 | Supply, laying, jointing, testing and commissioning ofISI marked (IS : 14930, part 2) H.D.P.E. (DWC) Double wall Corrugated pipe for cable layinghaving corrugation on outer wall and plain smooth surface at inner side including transportation upto the site, jointing, providing and fixing all fittings i.e. sockets, couplers, reducers, end caps etc including excavation in all kind of soil upto 1 meter depth of suitable width with back filling of soil into trenches tocomplete the works in all respects. (Make : Duraline / Jain / AKG) 63 mm. ID / 78mm OD |
| 176 | Supply ofAC230/250 volts, 50 HZ fresh airfansincluding providingnuts, bolts, mounting frame and other accessories etc.complete . (Make : Bajaj / Usha / newtek / Havells) 300 mm sweep |
| 177 | Drilling of 200 mm dia bore hole including all necessary T&P etc all complete in direction of engineer in charge. |
| 178 | Supply of 125 mm dia MSpipe as per IS1239including all necessary T&P etc all complete in direction of engineer in charge. |
| 179 | Supply of 125 mm dia slotted MSpipeincluding all necessary T&P etc all complete in direction of engineer in charge. |
| 180 | Supply and fixing of nylon jali around the slotted pipes complete as required including all necessary T&P etc all complete in direction of engineer in charge. |
| 181 | Providing and packing of coarse sand / pea gravel around the pipeincluding all necessary T&P etc all complete in direction of engineer in charge. |
| 182 | Transport of boring tools other required equipements and installation at site including all necessary T&P etc all complete in direction of engineer in charge. |
| 183 | Supply of submersible pump of make KSB (Cora) for 200 lit/min discharge at 50 meter head with control panel, support wire etc complete including all necessary T&P etc all complete in direction of engineer in charge. |
| 184 | Providing 3 core PVC insulated submersible cable. (from pump panel to submersible pump)including all necessary T&P etc all complete in direction of engineer in charge. |
| 185 | Providing and fixing 65 mm dia. G.I. pipe complete with fittings and clamps including cutting and making good the wall etc. (from submersible pump to ground level)including all necessary T&P etc all complete in direction of engineer in charge. |
| 186 | Providing and fixing 65 mm dia. brass gate valve with CI wheel of approved qualityincluding all necessary T&P etc all complete in direction of engineer in charge. |
| 187 | Lowering of 125 mm dia MS pipe in bore hole including cutting,jointing etc completeincluding all necessary T&P etc all complete in direction of engineer in charge. |
| 188 | Supply and fixing of tube well accessories i.e. well cap, clips, clamps, etc. to complete the job in all respectincluding all necessary T&P etc all complete in direction of engineer in charge. |
| 189 | Fixing, testing and commissioning for erection and lowering of submersible pump, 65 mm dia GI column pipe, 3 coresubmersible copper cable upto the control panel, supporting clamps, cable clips, pressure gauge, connection line and all other accessories required for the proper completion of the work. |
| 190 | Testing and development of tube wellincluding all necessary T&P etc all complete in direction of engineer in charge. |
| 191 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of Z Section |
| 192 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. |
| 193 | Mild steel or iron work of small sizes and sections such as trusses built up gates, door frames, record racks , roof work, gates etc etc.wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work Fabrication of Grills |
| 194 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 195 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm |
| 196 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. (Make - Saint gobain/ Asahi/ Modigardian) |
| 197 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 198 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 199 | Providing and laying integral cement based waterroofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing Compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above |
| 200 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 201 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm |
| 202 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 203 | (a) 250 mm x 10mm |
| 204 | (a) 200 mm x 10mm |
| 205 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 206 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 207 | Add for plaster drip course in plastered surface or moulding to R.C.C. projections. |
| 208 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. |
| 209 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) |
| 210 | Providing & fixing Armstrong or equivalent Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100x25x3600mmin Cherry/ Red Oak finish with spacing of 100mm. The baffle blade shall be suspended using Slotted U-profile at on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter. Installation of Armstrong Baffles: Locate the slot for Baffle Hangers in slot of Baffle section at 1200mm centres. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip. Baffles blades to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the |
| 211 | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge |
| 212 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 213 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture"s specification and direction of engineer in charge all complete. 66mm overall thickness partition using 8mm thick double skin multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS : 14862 with suitable fibre cement screws |
| 214 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge Extruded section profile size 48x40 mm |
| 215 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of "H" section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. "U" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer"s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter) |
| 216 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. |
| 217 | Wiring points for Fan /Fresh air fan (light duty exhaust fan )with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. |
| 218 | Wiring points for Plug with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & socketsheet etc.complete in all respects.as directed including matching colour wash. |
| 219 | Supply & fixing ofbuzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect. |
| 220 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable inPVC conduitpipe partly concealed including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. |
| 221 | Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in20mm dia heavy duty (2mm thick ) PVC conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. |
| 222 | Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FR PVC Multistand copperearth contunity wire including colour wash etc. complete in all respects. |
| 223 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG MS. Sheet incorporating 10mm dia, M.S. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C roof before concreting along with supply of all materials,labour. T& Petc. required for proper completion of the work. |
| 224 | Supply and fixing of flush/surface mounting distribution boardswith additional metal door without MCBcomplete in all respects.6 Way TPN |
| 225 | Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 6 - 32 amps.Cat. A |
| 226 | Supply and fixing of 40/63 Amp MCB(10KA)C Curve 63 Amp. 4 Pole MCB C Curve-Cat. A |
| 227 | Supply and fixing of power plug with 15 Amp./250 Volt flush type universal switch and 5 pin 15 A/250 Vflush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. |
| 228 | Supply and fixing of power plug with 20 Amp./250 Volt flush type universal switch and 5 pin 20 A/250 Vflush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. |
| 229 | Supply & fixing of single wall bracketon matching M.D.F.E.G.boardbase etc. complete in all required. Cat. AA |
| 230 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. |
| 231 | Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect. |
| 232 | 1 X 22 W CAT-AAA |
| 233 | 2 X 22 W CAT-AAA |
| 234 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect .(Category AAA ) |
| 235 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. |
| 236 | Supply and fixing of 55 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with body with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect. CAT- AAA |
| 237 | Supply &fixingofwater tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 and above protectioncomplete in all respect. |
| 238 | Supply of Ceilling Fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 abd also comply with IS: 1709/1984 with latest amendment. The rate voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball bearing system. |
| 239 | Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 240 | Supply & erection ofA.C 230/250 Volts,50 Hz exhaust fans including providing m.S bolts,mounting frame and other acessories including connections etc.complete as required300mm sweep as per directionof E/I Makebajaj,Cromption or Equivalent. |
| 241 | Supply & fixingof Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in allrespects as per direction and satisfaction of engineer-in-charge.-Cat. A |
| 242 | Supply and fixing of 63 A 415 V metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect . |
| 243 | Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. |
| 244 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. |
| 245 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbasesupportfor tank. 750 litres capacity |
| 246 | S/F of 100 mm dia G.I pipe "B" class for cable completed with support"s by 3 nos. clamp made for 20x30 mm MS flat and suitable size of nutbolt & washer required for proper completion of worh as per direction of E/I. |
| 247 | Supply and laying of aluminium conducter PVC insulated armoured served sheathed cables 1100 volts grate at a depth of below ground lvl overa cusion of 75 mm thick sand alroundand protected with burnt on side and on top ,On surface the cable run shallbe fixed on M.S clamps etc. of suitable size or as directed by E/I complete in all respects,The armouring of the cable shall be properly connected with the earth conductor by clamps atc. |
| 248 | (i) 10 Sq. mm 2core |
| 249 | (ii) 16 Sq. mm 4 core |
| 250 | (iii) 70 Sq. mm 3.5 core |
| 251 | (iv) 120 Sq. mm 3.5 core |
| 252 | Supply 7 fixing of plain or pin type copper tin plated cable socket to the cable leads, insulated with tape and making connection etc. complete in all respect as per direction of E/I |
| 253 | (i) 10 Sq. mm |
| 254 | (ii) 16 Sq. mm |
| 255 | (iii) 35 Sq. mm |
| 256 | (iv) 70 Sq. mm |
| 257 | (iv) 120 Sq. mm |
| 258 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. water closet of size 780x370x690 mm |
| 259 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 260 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests |
| 261 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 262 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 263 | 32 mm dia (for wash basin) |
| 264 | 40 mm dia(for sink and urinal) |
| 265 | Providing & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS :13983 with C.I. bracketsandstainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required. 510x1040 mm bowl depth 200 mm |
| 266 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 267 | Providing & fixing viterous china toilet paper holder. |
| 268 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal |
| 269 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 270 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 271 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 272 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 273 | Providing and fixing PTMT grating of approved quality and colour. Circular type:125 mm nominal dia with 25 mm waste hole |
| 274 | Providing & fixing soil, waste and vent pipes. |
| 275 | a) 100mm dia centrifugally cast iron S & S pipe. |
| 276 | b)75mm dia centrifugally cast iron S & S pipe. |
| 277 | Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. |
| 278 | 100 mm |
| 279 | 75 mm |
| 280 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. |
| 281 | a) for 100mm dia pipe. |
| 282 | b) for 75mm dia pipe. |
| 283 | Providing & fixingcast iron coller. |
| 284 | a) 100mm dia. |
| 285 | b)75mm dia. |
| 286 | Providing & fixing upvc SWR bend confirming to IS -14735 |
| 287 | 110mm dia |
| 288 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 289 | a) 100mm |
| 290 | b) 75mm |
| 291 | Providing and fixing centrifugaly cast iron single equal plain junction of required degree. |
| 292 | 100x100x100mm |
| 293 | 75x75x75mm |
| 294 | Providing and fixingcast iron terminal guard. |
| 295 | 100 mm |
| 296 | 75 mm |
| 297 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 298 | Providing and fixingGI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). Internal work-Exposed on wall |
| 299 | 15mm dia nominal bore |
| 300 | 20mm dia nominal bore |
| 301 | 25mm dia nominal bore |
| 302 | 32mm dia nominal bore |
| 303 | Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work. |
| 304 | 15mm dia nominal bore |
| 305 | 20mm dia nominal bore |
| 306 | 25mm dia nominal bore |
| 307 | 32mm dia nominal bore |
| 308 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. (internal work)Exposed on wall |
| 309 | a) 15mm dia nominal outer dia pipes |
| 310 | a) 20mm dia nominal outer dia pipes |
| 311 | Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) |
| 312 | 25 mm nominal bore |
| 313 | 32 mm nominal bore |
| 314 | Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats). 25 mm nominal bore |
| 315 | Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions. |
| 316 | Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. |
| 317 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms. |
| 318 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931. |
| 319 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter. |
| 320 | Providing, laying and joining glazed stone ware pipes grade "A"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.150mm diameter |
| 321 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameter |
| 322 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 |
| 323 | (i) For Sewer Line |
| 324 | Extra for depth of man hole size 90x80 cm |
| 325 | Providing and fixing square mouthS. W. Gully trapgrade `A" complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 180 x 150 mm. size P type |
| 326 | Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. |
| 327 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 328 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 329 | Frame anchor HRD-C 10x140 |
| 330 | Frame anchor HRD-C 10x120 |
| 331 | Frame anchor HRD-C 10x120 |
| 332 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 333 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 334 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 335 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 336 | Providing and laying integral cement based waterroofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing Compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above |
| 337 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 338 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm |
| 339 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 340 | (a) 250 mm x 10mm |
| 341 | (a) 200 mm x 10mm |
| 342 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 343 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 344 | Supplying & Intallation of Tesnsile fabric canopy make serge ferrari/ mehlar including all necessary T&P etc all complete in direction of engineer in charge. |
| 345 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 346 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 347 | 32 mm dia (for wash basin) |
| 348 | 40 mm dia(for sink and urinal) |
| 349 | Providing & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS :13983 with C.I. bracketsandstainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required. 510x1040 mm bowl depth 200 mm |
| 350 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 351 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 352 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws withconcealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 353 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 354 | Providing and fixing PTMT grating of approved quality and colour. Circular type:125 mm nominal dia with 25 mm waste hole |
| 355 | Providing & fixing soil, waste and vent pipes. |
| 356 | a) 100mm dia centrifugally cast iron S & S pipe. |
| 357 | b)75mm dia centrifugally cast iron S & S pipe. |
| 358 | Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. |
| 359 | 100 mm |
| 360 | 75 mm |
| 361 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. |
| 362 | a) for 100mm dia pipe. |
| 363 | b) for 75mm dia pipe. |
| 364 | Providing & fixingcast iron coller. |
| 365 | a) 100mm dia. |
| 366 | b)75mm dia. |
| 367 | Providing & fixing upvc SWR bend confirming to IS -14735, 110mm dia |
| 368 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 369 | a) 100mm |
| 370 | b) 75mm |
| 371 | Providing and fixing centrifugaly cast iron single equal plain junction of required degree. |
| 372 | 100x100x100mm |
| 373 | 75x75x75mm |
| 374 | Providing and fixingcast iron terminal guard. |
| 375 | 100 mm |
| 376 | 75 mm |
| 377 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 378 | Providing and fixingGI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). Internal work-Exposed on wall |
| 379 | 15mm dia nominal bore |
| 380 | 20mm dia nominal bore |
| 381 | 25mm dia nominal bore |
| 382 | 32mm dia nominal bore |
| 383 | Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work. |
| 384 | 15mm dia nominal bore |
| 385 | 20mm dia nominal bore |
| 386 | 25mm dia nominal bore |
| 387 | 32mm dia nominal bore |
| 388 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. (internal work) i) Exposed on wall |
| 389 | a) 15mm dia nominal outer dia pipes |
| 390 | a) 20mm dia nominal outer dia pipes |
| 391 | Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) |
| 392 | 25 mm nominal bore |
| 393 | 32 mm nominal bore |
| 394 | Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats). 25 mm nominal bore |
| 395 | Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions. |
| 396 | Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. |
| 397 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms. |
| 398 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931. |
| 399 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbasesupportfor tank. 750 litres capacity |
| 400 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.a) Pipes 80mm to 300mm diameter. |
| 401 | Providing, laying and joining glazed stone ware pipes grade "A"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter |
| 402 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameter |
| 403 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design . Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 |
| 404 | (i) For Sewer Line |
| 405 | Extra for depth of man hole size 90x80 cm |
| 406 | Providing and fixing square mouthS. W. Gully trapgrade `A" complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 k.g and frame to be not less than 2.70 kg as per standard design. 180 x 150 mm. size P type |
| 407 | Providing & fixing of 50 mm thick GRC Jali including grout in brick wall as per drawing & design and approval of architect in charge. |
| 408 | POSTER FRAME (F-1)- SIZE=0.45X0.55MT. Providing teak wood frame around the poster with 6mmcommercial ply I.S. 5509 ( Greenply/ Century, )back, frame shall be PU Polished and 6mm thick glass as cover with patch fittings etc all complete in direction of architect in charge. Refer Drg |
| 409 | FRAME (F-2)- SIZE=0.24X0.34MT. Providing teak wood frame around the poster with 6mmcommercial ply I.S. 5509 ( Greenply/ Century, )back, frame shall be PU polished and 6mm thick glass as cover with patch fittings etc all complete in direction of architect in charge. Refer Drg |
| 410 | FALSE CEILING - Providing & fixing of Armstrong False Ceiling make Armstrong Sound scape HEXAGON SHAPE TRAFFIC WHITE SCRIM - WITH EMBEDDED FRAMES 1200x1200x 30MM including frame &panel etc all complete in direction of engineer in charge. |
| 411 | Providing & fixing of Armstrong False Ceiling Silhouette including frame & Panel etc all complete in direction of engineer in charge. |
| 412 | Gypsum Partition- Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 (DSR 6.40) |
| 413 | Suppying testing & commissioning of water coolar with water storage tank capcity 50 litre per hour including stabilizer with stand and water suuply pipe & copper cabling & drain pipe etc all complete in direction of engineer in charge. (Make Blue star/ Eurekforbes) |
| 414 | Reception table with18 mm thick Ply with veneer top of size 1.00 mtr x0.600 mtr the edge finish with corner bevelled as per the design specified in the drawing planks fixed on the frame of 18 mm thick ply also providing 3 nos. sliding storage shelf made with commercial ply I.S. 5509 ( Greenply/ Century, ) of 12mm thick planks design as per drawing, shelf track of 25mm thick Ply . &legs made in teak wood height 0.75 mtr size varying as per design. smooth edge finished all including moulding & carving as described in the drawing and PU polishedetc all complete in direction of architect in charge. |
| 415 | Reception chair Medium Back rest chair without arm, back rest finish all in teak wood, chair have all finished in teak wood as per drawing . high quality linen fabric at least 800.00 Rs. per RMT with cushion on both seat and back. legs all made in teak wood all edge smooth finished. all include moulding, carving and beadings as per design and PU Polished etc all complete in direction of architect in charge. (SIZE=0.45X0.45X.045MT. ) |
| 416 | Table Lockertable with 18mm thickcommercial ply I.S. 5509 ( Greenply/ Century, )of size 2.10 mtr x0.60 mtr the edge finish with corner bevelled as per the design specified in the drawing planks fixed on the frame of 130x45mm thick teak wood also providing 10 nos. sliding storage shelf (325x450mm ) in two layers made with teak wood of 19mm thick planks design as per drawing, shelf track of 15mm thick teak wood . &legs made in teak wood height 1.00 mtr size30x45xmmvarying as per design. smooth edge finished all including moulding & carving & necessary fittings handle & Locks etc, as described in the drawing. |
| 417 | SIZE=1X0.45X1.5MT. Almira as per drawing with 4mm Veneerover 19 mm Ply water proof Plywood (conforming to international formaldehyde emission standards)and teak wood beading finished edgesandinner surface finished with 4mm veneeras/ shade approved by the Architect/in Charge. The shuttershall be of Teak woodwith glass/teakwood panel as per Drawings. The almira shall be PU polished etc all complete in direction of architect in charge. |
| 418 | SIZE=0.6X0.6X0.45MT. Teak wood batten planter with 3mm brass metal case to hold clay pot and planter, planter shall be PU polished etc all complete in direction of Architect in charge. Refer Drg |
| 419 | SIZE=1.65X0.8X0.45MT. Teak wood batten planter with 3mm brass metal case to hold clay pot and plantershall be PU polished etc all complete in direction of Architect in charge. Refer Drg |
| 420 | SIZE=3.00X0.75X1.35 MT. Providing teakwood framing on the edge of shelf with shutter panels with glass. Providing fittings (Dorma or equvellantglass to glass hinges 2 nos. 180*, door knob 1 no., glass to glass connector 180* 4 nos., glass to glass connector 90* 20 Nos., Glass to wall connector 90* 12 Nos, 12mm thick toughened glass with silicone including installation etc all complete in direction of architect in charge. |
| 421 | Providing and fixing of 8mm thick sun board panel, using 8 mmcommercial ply I.S. 5509 ( Greenply/ Century, )as base with teak beading on edge as per drawing. The display material has to be printed on Vinyl film LG/Garware/3M Film and pasted on the glass. etc all complete in direction of architect in charge. Ref. Drg. |
| 422 | Providing and fixing of 12 mm thick toughened glass panel of specified size using hardware fittings- namely steel studs as per drawing. The display material has to be printed on LG/Garware/3M Film and pasted on the glass.etc all complete in direction of architect in charge. Ref. Drg. |
| 423 | SIZE=3.0X0.75X1.35MT. Tableas per drawing Teak Wooden plank tableand teak beading finished edges. Providing fittings (Dorma or equvellant) glass to glass hinges 2 nos. 180*, door knob 1 no., glass to glass connector 180* 4 nos., glass to glass connector 90* 20 Nos., Glass to wall connector 90* 12 Nos, 12mm thick toughened glass with silicone including installation etc all complete in direction of architect in charge.Refer Drg. |
| 424 | SIZE=3.3X0.6X1.52MT. Diorama display boxTeak Wooden frameand teak beading finished edges. Including Providing & fixing of6mm Glass on 1 side for display including patch fittings etc all complete in direction of Architect in charge.. Refer Drg. |
| 425 | Supply and fixing of Gazeebo (3.50 mtr Dia) octagonal shape and 3.0 mtr height and Tata blue scope roof with frame as per drawing including grouting of Cast iron column in R.C.C Block (Size 450mmx450mmx450mm) and gazebo floor vitrified tile and cast iron railing 900 mm high with painting and entry in one side and including one coat primer & painting, polishing including all necessary T& P etc. all complete in direction of Engineer in charge. |
| 426 | Providing & fixingof Sand Stone single piece slab ornamental benches Size 1500x500 mm and height 400 mm of approved design pattern (shape) and specifications includingCement concrete1 :2 :4 grouting, all materials, labor and T & P etc. required for proper completion of work as directed by Architect - in -charge. |
| 427 | Providing & fixingofMild steel benches Size 1500x500 mm and height 400 mm of approved design andspecifications with paining polidhingincludingCement concrete1 :2 :4 grouting, all materials, labor and T & P etc. required for proper completion of work as directed by Architect - in -charge. |
| 428 | Fabrication and supply & Fixing of Stainless Steel grade, Sheet thickness = 1.2 mm, Double Dustin Situable for air port, Park, Metor Stations etc.with civil work including all necessary T&P etc all complete in direction of engineer in charge.(Model No. OZUF-DB-BO-LID, Make -Ozone/ Jindal/ J.C.Decaux or equivalent) |
| 429 | Suppying testing & commissioning of water coolar with water storage tank capcity 50 litre per hour including stabilizer with stand and water suuply pipe & copper cabling & drain pipe etc all complete in direction of engineer in charge. (Make Blue star/ Eurekforbes) |
| 430 | Suppying testing & commissioning of Split A.C. 1.5 tonne including indoor & outdoor unitincluding stabilizer with stand & copper cabling & drain pipe etc all complete in direction of engineer in charge. (Make Daikin / Hitachi/ O genral) |
| 431 | Supplying and Fixing of Duplex MAPS D03 outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 432 | Supplying and Fixing of Four Seater Arc Swing outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 433 | Supplying and Fixing of Multi Seater See Saw outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 434 | Supplying and Fixing of Cystal Maze outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 435 | Supplying and Fixing of Turbo Tower outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 436 | Supplying and Fixing ofCurve Loop Climber outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 437 | Supplying and Fixing of BALANCING BRIDGE (MODEL NO- PGTH 03) outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 438 | Supplying and Fixing of Four Seater MGR outdoor playing equipment(Make Arihant/ Kompain) including necessaryfittings, T&P etc all complete in direction of engineer in charge. |
| 439 | Supplying & Laying of Sand mixed Gravels including all necessary lead & lift with compaction etc all complete in direction of engineer in charge. |
| 440 | Supplying & Laying of Graced stone chips (22-4-53 Gauge stone) including all necessary lead & lift with compaction etc all complete in direction of engineer in charge. |
| 441 | Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm charecteristic opening size (O90) of 110 micron and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete as per directions of Engineer in charge. |
| 442 | Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection.The panel sheet structure shall undergo seven tank pre-treatment process before painting.The sheet steel shall be all of 2.2mm thick CRCA sheet.All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers.The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm.The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections.All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable.Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places.The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters.Proper sized cable termination gland plates shall be provided oncable alleys and knockouts for same shall be provided during fabrication stage itself.The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions.A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel.Panel shall be so designed at to have minimum 20% spare feeders/space.Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement.All cable terminations shall be from top.The complete panel shall be fuse less type, for control circuits 2A/6A MCB"s to be used. All bus bars shall be of aluminium, electrolytic grade only.Maximum design density shall not exceed 1 Amps/Sqmm.All bus bars shall be insulated with coloured heat shrinkable PVC sleeved.All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm, |
| 443 | Sub Panel-Incoming :One (1) No 200A 4 pole MCCB, Metering :-One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch,One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc., One (1) Set of Phase Indication Lamp.,Bus Bar :-One (1) No.200 A, TPN aluminimum bus bar of suitable length.Outgoing :Phase indication lamps on each outgoing to be provided., 100Amps TPN-2 Nos ,OR outgoing as per site requirment, |
| 444 | Incoming :One (1) No 315A 4 pole MCCB, Metering :One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch., One (1) No. (0-315A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc., One (1) Set of Phase Indication Lamp., Bus Bar :One (1) No.315 A, TPN aluminimum bus bar of suitable length.,Outgoing :Phase indication lamps on each outgoing to be provided.100Amps TPN- 3 Nos ,OR outgoing as per site requirment |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
