Repair / Maintenance Of B / R Works Of Gr And Sata Bty Accns ( Otm / Md ) Under Ge Diaptoli
Tender Value
30 Lakhs
Estimated cost
Bid Submission
20 Jun 2022
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dipatoli → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Maintenance Of B / R Works Of Gr And Sata Bty Accns ( Otm / Md ) Under Ge Diaptoli
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down steel tubing and connections including for refixing or removal 15mm bore complete all as specified and directed. |
| 2 | All as per item No 1 but 20mm bore complete all as specified and directed. |
| 3 | S&F steel tubing and connection in new or old position to walls, ceiling, floors etc complete all as specified and as directed 15 mm bore medium grade with all fittings, fitted to wall and ceiling or laid in floor complete all as specified and directed. |
| 4 | All as per item No 3 but for 20mm dia complete all as specified and directed. |
| 5 | Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and directed. |
| 6 | All as per item No 05but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 7 | Taking down shutter of any description nexc 1 Sqm each complete all as specified and directed. |
| 8 | Taking down shutter of any description exc 1 Sqm but n\"exc 2 Sqm each complete all as specified and directed. |
| 9 | Re-securing or easing and adjusting without taking down wooden shutter of any description not exc 1Sqm each complete all as specified and directed. |
| 10 | Re-securing or easing and adjusting without taking down wooden shutter of any descriptionexc 1Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 11 | M&L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 12 | S&F 35mm Flush shutters (ISI Marked) solid core construction with block board core and plywood, commercial type on both sides complete all as specified and directed. Make : M/s Jain wood Industries |
| 13 | S&F 35mm thick glazed and skeleton shutters 2nd class hardwood without sash bars complete all as specified and directed. |
| 14 | S&F 30mm thick glazed and skeletion shutters 2nd class hardwood without sash bars for window, ventilators complete all as specified and directed.Make : M/s Jain wood Industries |
| 15 | S&F Glazed and skeleton shutters (30mm thick in 2nd class hardwood) open rebated and prepared to receive glass, gauze, etc(with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc for window & ventilators complete all as specified and directed. |
| 16 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glasing bars dovetail ed or welded all complete all as specified and directed. |
| 17 | S&F factory made steel ventilators with top hung shutters including hinges,steel peg stay complete all as specified and directed. |
| 18 | M&L for mild steel works as in hold fast/wind ties etc, complete all as specified and directed. |
| 19 | M&L PCC 1:2:4 type B1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and directed. |
| 20 | S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and directed. |
| 21 | S&F in repair GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and directed. |
| 22 | Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 23 | S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 3mm thick complete all as specified and directed. |
| 24 | All as per above item No 23 but n.exc 0.5 sqm in each pane of 3mm thick figured glass complete all as specified and directed. |
| 25 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 26 | S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 27 | S&F mild steel sliding door bolts 300mm long complete all as specified and directed. |
| 28 | S&F in repairmild steel sliding door bolts 300mm long complete all as specified and directed. |
| 29 | S&F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and directed. |
| 30 | S&F in repair 100mm size MS butt hinges, medium weight cold rolled complete all as specified and directed. |
| 31 | S&F 150mm long Aluminium handle cast type anodised complete all as specified and directed. |
| 32 | S&F in repair 150mm long Aluminium handle cast type anodised complete all as specified and directed. |
| 33 | S&F 600mm x 450 mm bevelled edge mirror of selected quility glass, mounted on 6 mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screwesand cup washers (with fancy design), complete all as specified and directed. |
| 34 | S&F Bath cabinet mirror of size 350 x 450 mm made ofPTMT alloy (with fancy design), complete all as specified and directed. |
| 35 | S&F in repair 75 mm longmild steel medium weight collrolled butthinges complete all as specified and directed. |
| 36 | S&F 125mm size aluminium handles, cast type anodised complete all as specified and directed. |
| 37 | S&F in repair 125 mm size aluminium handles, cast type anodised complete all as specified and directed. |
| 38 | S&F in repair PVC valveless syphonic duel flush action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore with fancy design, complete all as specified and directed. |
| 39 | S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink with fancy design, complete all as specified and directed |
| 40 | S&F 150mm long Aluminium anodised barrel tower both of extruded section complete all as specified and directed. |
| 41 | S&F in Repair 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 42 | S&F small fitting shaped door and window stops n\"exc 200 cum each of 2nd class hard wood complete all as specified and as directed |
| 43 | S&F 50mm Butt hings medium weight cold rolled and mild steel complete all as specified and directed. |
| 44 | S&F in repair 50mm Butt hings medium weight cold rolled and mild steel complete all as specified and directed. |
| 45 | S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered head \"HOT\" or \"COLD\" with long screwed shank and flynuts screwed for iron pipe (half turn type), complete all as specified and directed. |
| 46 | S&F in repairstop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design, complete all as specified and directed. |
| 47 | S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shankand cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm borewith fancy design (half turn type), complete all as specified and directed. |
| 48 | S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type), complete all as specified and directed. |
| 49 | S&F in repairs Brass CP mixer tap 15mm dia bore (three in one)for mixing hot & cold water screwed down for iron pipe with fancy design, complete all as specified and directed. |
| 50 | S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia borefor mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe with fancy design, complete all as specified and directed. |
| 51 | S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipeor for brass ferrule (half turn type), complete all as specified and directed. |
| 52 | Dismantalling of existing water tanks 1000 ltr and removinging to store complete all as specified and directed. |
| 53 | S&F in repair hoisting 3 layers PVC tank 1000 litrescapacity including supply & Fix 20mm dia brass float valve assembly complete all as specified and directed. |
| 54 | Dismantalling of existing water tanks 500 ltr and removinging to store complete all as specified and directed. |
| 55 | S&F in repair hoisting 3 layers PVC tank 500 litres capacity including supply & Fix 20mm dia brass float valve assembly complete all as specified & directed |
| 56 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawingwith fancy design, complete all as specified and directed. |
| 57 | S&F in repairs decorative curtain rod made out of 25 mm dia (outer dia) MS pipe having wall thichness 0.63 mm, PVC coated of any coulor and pattern as approvedoverall dia 28 to 29 mm,including provn of two nos brackats on each ends and provn of two nos of globe on each ends for each window/door for fixing with fancy design, complete all as specified and directed. |
| 58 | S & F utensil rack / Kitchen rack stainless steel size 850 mm x 800 mm x 250 mm approved make with fancy design, complete all as specified and directed. |
| 59 | S&F Corner Glass Shelf 300 mm (with ABS brackets) of size (300x300)mm with fancy design, complete all as specified and directed. |
| 60 | S&F PVC (SWR)pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed. |
| 61 | S&F PVC(SWR) pipe 75 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed. |
| 62 | S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed. |
| 63 | S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed. |
| 64 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises etc complete all as specified and directed. |
| 65 | Brushing neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and directed. |
| 66 | M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular)polished,area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 67 | All as per item No 66 above but in skirting dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and directed. |
| 68 | M&L joint free Non Skid ceramic colour ceramic tiles 7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm in floors over and including 15mm thick screed bed in CM(1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and directed. |
| 69 | M&L Joint free for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mm x 250mm x 7mm /450 x 350x7mm thick over and including10 mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed. |
| 70 | M&L Machine cut kota stone slab flooring 20-25 mm thick set over and including 15mm thick screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing, complete all as specified and directed. |
| 71 | All as per item No 70 but here-in-before as in skirting over 10mm thick cement plaster in CM (1:4), complete all as specified and directed. |
| 72 | M&L Machine cut black Granite stone slab 20 mm thick (as in cooking platform) over 15mm thick (1:6) cement screedbase laid and jointed with greyement slurry mixed with pigment to match the shade of slab including rounding of edges, grinding and polishing complete all as specified and directed. |
| 73 | Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situationscomplete all as specified and directed. |
| 74 | Demolition ofcement concrete(un-reinforced) in ground floors and pavingnot exceeding 15 cm thickness below or above the ground floor etc complete all as specified and directed. |
| 75 | M&L plain cement concrete, Type D-2, (1:4:8) using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 76 | M&L 100 mm thick cement concrete in foundations / sub base of floor in cement morter (1:4:8) type D-2 complete all as specified and directed. |
| 77 | M&L Cement concrete in floors 40mm thick over sub base (1:2:4) type B1 using 20mmgradedaggregate finished even and smooth without using extra cement complete all as specified and directed. |
| 78 | Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 Part of bitument and 3 part of sand) complete all as specified and directed. |
| 79 | M&L for 75 mm thick PCC (1:3:6)Type C-2 using 40mm graded aggregate as in plinth protection etc finishedcement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 80 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed. |
| 81 | M&L mild steel works as in framed work such as grills, gratings, etc with ends of bars shoulderedand/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etccomplete all as specified and directed. |
| 82 | Excavation in post holes or similarholes eachnot exc 0.5 Cum getting out, returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance nexc 50 mtr and making good surface complete all as specified and directed. |
| 83 | M&L plain cement concrete, Type C-2, (1:3:6) using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 84 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed. |
| 85 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and couter sunk) forming holes, without any attachment of Gde Fe 410-W (Gde-E-250), complete all as specified and directed. |
| 86 | S&F Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 87 | M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed. |
| 88 | All as per item No 87 above but n exc 10 cm width or girth complete all as specified and directed. |
| 89 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 90 | M&L rendering onfair faces of brick or concrete work 15mm thick in CM (1:6) and to be finished smooth and even with out using extra cement for internal surface complete all as specified and directed. |
| 91 | M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls after one coat of white primer with and including average 2mm thick white wall care putty to achieve even and smooth surfacecomplete all as specified and directed. |
| 92 | M&L for preparingthe old surfaces and applying one coat of oil bound distemper white or tinted on walls complete all as specified and directed. |
| 93 | M&L Rendering 5mm thick in cm (1:3) on ceilling. surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 94 | M&L for applying two coats of white wash on new wall/concrete surfaces including preparation of newly plastered surfaces complete all as specified and directed. |
| 95 | M&L rendering on fair faces of brick or concrete work 15mm thick in CM (1:4) and to be finished smooth and even with out using extra cementfor external surface complete all as specified and directed. |
| 96 | M&L for preparingthe new plastered surfacesof walland applying two coat of cement based paint after one coat of white primer complete all as specified and directed. |
| 97 | M&L for preparation of old decorated surface of walls rubbing, watering etc and applying one coat of cement base paint complete all as specified anddirected. |
| 98 | M&L preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and directed. |
| 99 | M&L for preparation of previously treated/ old painted surfaces of wood or wood based materials including for knotting and stopping (of any description) over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 100 | Dismantling of boarding any description, fixed in any position with screws, complete all as specified and directed. |
| 101 | S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard with fancy design, complete all as specified and directed. |
| 102 | S&F 30 mm continous (piano) hinges mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 103 | S&F 75 mm Hasp & staple MSstove enammeled black, including bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 104 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finishedcomplete all as specified and directed. |
| 105 | Providing and fixingof powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b)Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick.(c)Sliding shutter frame of cross section 40 x18 x 1 mm(d)Aluminium glazing strip of size 18.2 x 16.66mm (e)4 mm thick float glass superior qualityfor 2 shutters.(f)IDPE rubber gasket for fixing glass(g)Locking cleat per shutter 01 Nos.(h) 02 Nos sliding rollers per shutters. (j)Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter.(k)Fixing screws for frame with wall 06 per windowwith fancy design. |
| 106 | M&L for powder coated alumunium chowkhat of size 101.6mm x 44.5mm x 1.5mm thick in section fixed to walls and alumunium frame with anodised alumunium screws complete all as specified and directed. |
| 107 | S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85 x 44.5x1.5mm and Top rail size 114.30 x 44.5mmx1.5mm bottom rail 150mm x 44.5mm x 1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos, stainless steel hinge 100mm size-4 Nos, central mortice lock, alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer, designation No 2, universal type, cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel, complete all as specified and directed. |
| 108 | S&Fin repair 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed. |
| 109 | Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting reconnecting and refixing in existing position. Capacity of tanks exc 500 ltrs and not exc 1000 ltrscomplete all as specified and directed. |
| 110 | Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting reconnecting and refixing in existing position. Capacity of tanks exc 250 ltrs and not exc 500 ltrscomplete all as specified and directed. |
| 111 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 112 | S&F in repairvitreous china wash Basin white flat back size 550 x 400mmincluding brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 113 | S&F 40 mm low density polyethylene (HDPE) pipes, complete all as specified and directed. |
| 114 | S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest and trap set complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as specified and directed. |
| 115 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. |
| 116 | Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Fixing only rate is included in item No 115 above), complete all as specified and directed. |
| 117 | S&F Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete all as specified and directed. |
| 118 | S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer, complete all as specified and directed. |
| 119 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 120 | S&F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass, complete all as specified and directed. |
| 121 | S&F in repair PVC (SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 122 | M&L machine pressed precast concrete interlocking paver block with Grey Cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning complete all as specified and directed. |
| 123 | M&L for spreading and levelling of sand in layers n exc 25cm thick over sub base complete all as specified and directed. |
| 124 | Demolition ofBrick/stone works masonry, built in cement mortar or cement limemortar including all quoins, arches, pillars etc but excludingashlar facing, dressed stone work andpre-cast concrete articles complete all as specified and directed. |
| 125 | M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed. |
| 126 | M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM (1:4) complete all as specified and directed. |
| 127 | M&L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 128 | M&L for precast reinforced cement concrete M-15, using 20mm graded stone aggregate set in CM (1:4) as in cover slab (for manhole etc) including use & waste of form work for fair finished surfacescomplete all as specified and directed. |
| 129 | M&L for roof treatment in repair by complete removal of existingold treatment and Brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified and directed. |
| 130 | M&L for 15 mm thick in cement plaster even and smooth surface using cement motar (1:4) mixed with integral water proofing compound, complete all as specified and directed. |
| 131 | M&L forApplying oil based bitumen primer @ 0.30 ltr/Sqm on plasterd surface for use in waterproofing and damp-proofing treatment, complete all as specified and directed. |
| 132 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 133 | M&L for Appling two coat of aluminiumpaint @ 200 gm /sqmover bituminous surface of membrane, complete all as specified and directed. |
| 134 | Supply ony integral water proofing compound, complete all as specified and directed. (Make : ACCO PROOF/WATER SEAL/IMPERMO) |
| 135 | M&L for sunken floor treatment by taking down of damaged IWC, demolition of PCC in sunken floor filling, cleaning the surface and carrying out treatment with 15mm thick plaster in CM (1:2) with WPC, applying a coat of hot bitumen of grade 85/25 @ 0.7 kg/Sqm over a coat of bituminous primer @ 0.50Kg/Sqm, pasting a layer of polythene film of 150 micron, fixing 25mm dia GI pipe of 45 CM long S&F new IWC \"ORISSA\" pattern of 580 x 440mm with intergral footrest, with trap and providing PCC lean concrete in Mix (1:5:10) complete all as specified and directed. |
| 136 | M&L forrepair and rendering 10mm thickin cm (1:3) on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement andtreating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/ single storey bldgs complete all as specified and directed. |
| 137 | M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cm x 30cm x 25mm thick over 15mm thick screed bed in CM (1:6) set jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 138 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
AI Tender Summary
Tender Timeline
May 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender