|
| 1 | Excavating over areas, not exc 1.5 m wide deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavating over areas, for each additional 1.5 mtr or part therefore in depth deep and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm in any type of soil, making good to surfaces and removing the surplus soil in low lying areas, complete all as specified and directed. |
| 4 | M&L for 250mm dia pipe boring holes 30 mtr deep in soil for under-reamed piles and getting out and disposal of spoil to a distance of n.exc 50 m complete all as specified and as directed. |
| 5 | M&L forgravel 5-10mm in size and spread thickness in 400mm consolidated to gradient and chamber required complete all as specified and as directed. |
| 6 | M&L for for hardcore of broken stone or boulder of gauge exc 40mm but n.exc 63mm deposite spread and levelled in layer n.exc 30cm thick watered and well rammed to true surface complete all as specified and as directed. |
| 7 | M&L for cement concrete 100MM thick type B-1, 1:2:4 (20mm graded aggregate) as fdn, including rat, footing, fdn beams, plinth beams base for col etc basement slab under reamed piles and mass concrete complete all as specified and as directed. |
| 8 | M&L brick work with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 complete all as specifed and directed. |
| 9 | M&L for 150mm dia rainwater heads, pentagonal or hexagonal including slotted vent cowl complete all as specified and as directed. |
| 10 | M&L forsand filling under floor or in foundation including watering and consolidation complete all as specified and directed. |
| 11 | Removing excavated material n.exc 50 m and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed. |
| 12 | M&L for TMT bars 10mm dia, cut to length bent to shaperequired including cranking, bending spirally for hoping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality confirming to Fe 410-5 or Fe 400-0. |
| 13 | M&L for TMT bars 8mm dia, cut to length bent to shaperequired including cranking, bending spirally for hoping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality confirming to Fe 410-5 or Fe 400-0. |
| 14 | M&L for precast cement concrete 1:2:4 (20mm graded aggregate) type B-1 as inlandings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork complete all as specified and as directed. |
| 15 | S&F for 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints lasid in trenches or in floor complete all as specified and as directed. |
| 16 | M&L for 150mm dia UPVC slotted pipe conforming to IS -4985-2000 in 6 Mtr length of pressure rating 6kg/Sqcm with all fittings complete all as specified and as directed. |
| 17 | M&L for 15 mm thick rendering on fair faces or brick work or concrete in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L PCC type B-0 1:2:4(12.5mm graded aggregate) providing, cement concrete in roof kerbs or mud stops , rounded or chemfered on edges plinth courses, string courses , licing courses, parapets and railing upto 60cm in height, coping kneelers , apex stones, bed plates, kerbs not providing including weathering, slightly rounded or chamered angle and throating, as directed. |
| 19 | M&L for framed works such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, framework of watertanks and similar work conforming to Fe.290 Gde-E-165. complete all as specified and directed. |
| 20 | M&L preparation of new steel surface of any discription over 10 cm in width or girthand applying two coats of synthetic enamel paint over a coat of red oxide not otherwise discribe complete all as spicified. |
| 21 | S&F domic type stainless steel grade 304 post of minimum 40-50mm dia in sizewith stainless steel plate on bottom and hook on top to receive chain or other items fixed on concrete surface with screws and adhesivefinished and polsihed completeincluding making good disturbed surfaces complete all as specified and directed by engr-in-charge. |
| 22 | S&F of 3mm thick stainless steel plate garde SS 304, minimum weight of plate is 47.6kg/sqm fixed with screws, rebated & steel welding finished with polishing including making good disturbed surfaces complete all as specified and directed by Engr-in-charge. |
| 23 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates), as foudation, filling and mass concrete complete all as specified and as directed. |
| 24 | M&L for writing letter or figures (Block,Roman,Italic or Indian) exc 10cm but n.exc 20cm high complete all as specified and as directed. |
