Public Works Department-PWD has published Repairs/Renovation Of Residential Complex At Mechanical Field Sub-Division Poonch And Adjoining Area I.E. Damaged Drain, Flooring And Repair To Septic Tank Etc. And Allied Works. Providing Of Main Gate To Residential Complex With Construction Of New. Submission Date for this Tender is 09-06-2022. Septic Tank Tenders in poonch Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge for1:3:6 or richer mix (i/c equivalent design mix) 17.50 cum |
| 2 | Cement concrete flooring 1:2:4, 50 mm thick with 20mm nominal size stone aggregate. 170.54 sqm |
| 3 | Providing and laying vitrified floor tiles of Size 600x600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 202.8 sqm |
| 4 | Extra for cut tiles other than half tiles used in skirting 32.28 sqm |
| 5 | Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)= 1290sqm |
| 6 | Providing and applying white cement based putty2 mm thick , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 96 sqm |
| 7 | Painting on wooden work, grills and Gate with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 470sqm |
| 8 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats) 176.5sqm |
| 9 | Providing corrugated G. S. sheet roofing 0.63 mm thick with zinc coating not less than 275 gram/m2including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint 4.46 sqm |
| 10 | Providing and fixing plain multipurpose 6 mm thick Cement fiber boardwith suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately) 37.16 sqm |
| 11 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil 52 cum |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 3.74 cum |
| 13 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 14 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (1000 litres). |
| 15 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete |
| 16 | Main Gate for Quarter complex(New) 16.1Demolishing brick work In cement mortarmanually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge 1.59 cum |
| 17 | Columns a) Earth work in excavation for all kind of soils by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by the engineer-in charge. 2.71 cum |
| 18 | b)Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 0.45 cum |
| 19 | c) Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 2.74 cum |
| 20 | d)Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more.10mm= 90m @0.62 kg/m = 55.80 kg 12mm= 47m @ 0.89 kg/m= 41.80 kg 16mm= 48m @ 1.58kg/m= 75.80 kg Total Qty= 55.80+41.80+75.80 = 173.40 kg |
| 21 | e) Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete 6.13sqm |
| 22 | Columns, pillars, piers, abutments, posts and struts 9.10 sqm |
| 23 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete by using Electric resistance or induction butt welded tubes: RHS(80×40×4)mm= 11"6""×2 + 7"×8=79 " or 24.07 m @6.82kg/m = 164.22kg RHS(66×33×2.9)mm= 4 (6"6""×5) +16"= 146" or 44.50m @ 4.07kg/m = 181.11kg RHS(40×20×2)mm= 20m@ 1.68kg/m = 33.60 kg Total= 164.22+181.11+33.60= 378.93 kg Adding 6% losses= 22.73kg Total Qty= 401.67kg |
| 24 | 4 large size handles(06 no"s.), hinges(03 no"s), locking arrangements etc., fixing of gate, complete |
| 25 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) 0.21 cum |
| 26 | 15mm Cement plaster on the rough side of single or half brick wall of mix1 : 6 ( 1 cement : 6 fine sand) 11.67sqm |
| 27 | Providing and fixing controlled flush, low level cistern made of vitreous China of 10 liter (full flush) capacity ,white, with all fittings complete |
| 28 | Making holes in the walls ,P/F of Exhaust Fan 300mm dia with all necessary fittings and then repairing the walls after fitting, complete |
| 29 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete . |
| 30 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms |
| 31 | Providing and fixing chromium plated brass curtain rod of 20 mm dia having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete |
| 32 | Renewing glass panes, with wooden fillets wherever necessary forFloat glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)=10sqm |
| 33 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge= 20 sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
