Quotation For Erection Of Bhel Make 400/220/33Kv, 105Mva Spare Unit For Ict 1 At 400Kv Girwali Substation With Allied Works Under 400Kv R.S.(O&M) Division, Girwali -, Girwali-Maharashtra

Quotation For Erection Of Bhel Make 400/220/33Kv, 105Mva Spare Unit For Ict 1 At 400Kv Girwali Substation With Allied Works Under 400Kv R.S.(O&M) Division, Girwali -1 Buchholz Relay 2 Pressure Release Valve (PRV) 3 Winding Temperature Indicator 4 Oil Temperature Indicator 5 Erection of LA on provided support structure with minor modification with stacks, insulator base, with leveling, connecting terminal connector and jumper connection with connecting the counter, with earthing connection etc. complete for 398 kV 6 398kV 7 198kV 8 33kV 9 Laying of Control/Power cables on existing cable trays on cable trenches with aluminium tags at both ends with binding the same on cable trays at suitable intervals with dressing, with segregation of control & power cables separate on cable trays rows as directed, the cables will be provided by MSETCL in drums, the same are required to be transported to required place and unwounded with turnable smoothly avoiding the damages to the cables 10 19C*2.5 Control cable 11 4C*2.5 Control cable 12 12C*2.5 Control cable 13 Cable termination at both ends as per termination schedule provided with cable glanding at both ends panel/MB etc with drilling of suitable size holes for cable glands as per cable sizes with spare holes as directed, glanding the cable with proper size glands to make it tight and firm, checking the cables cores from both side for continuity with suitable arrangement and providing the cross feruling as per cable schedule to both ends of cable and crimping of suitable size required lugs as per cable core sizr with suitable crimping tool making it tight connection and then dressing up the same in TBs provided in panels / MBs etc as directed for the following cables with sealing of spare holes By providing required size lugs, glands and ferules. 14 19C*2.5 Control cable 15 4C*2.5 Control cable 16 12C*2.5 Control cable 17 Laying the provided MS Flat in ground at @0.6 meter below ground with welding as per prescribed method at requred place, bends and with required fabrication and connecting the same to the earth pit / or at any other place as directed 18 Taking out the riser connection with provided M.S. Flat with excavation at required place up to main mat and welding the riser to main mat with required bending/ fabrication etc. and taking this riser to the required place of support structure foundation with making it flush with the foundation surface 19 Earthing of equipment / support structure with provided M.S. Flat with bending / fabrication welding etc. making it flush with support str. / equipment as directed with connecting the same with required size nut bolts ( to be provided by the agency ) 20 Fixing of cable trays on equipment support structure fortaking out the cables from the terminal box of equipmentwith flushing the equipment support structure as directed 21 400x40mm 22 80x20mm

Refer document

Refer document

Refer document