Remodelling Of 4 Nos Bridge At Rd 54830 63380 83268 And 91635 Of Petwar Disty
Tender Value
5.06 Crore
Estimated cost
Bid Submission
01 Jul 2022
0 days left
EMD
9.95 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Remodelling Of 4 Nos Bridge At Rd 54830 63380 83268 And 91635 Of Petwar Disty
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Jun-2022 | Date and time extended | Date | 01-Jul-2022 |
| 2 | 01-Jun-2022 | Corrigendum | Technical Bid | 13-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavatedsoil as directed, within a lead of 50 m in all kind of soil as per HSR item No.4.14.1 |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-charge in all kinds of soil as per HSR item No. 4.12.1 |
| 3 | Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in Cement mortar 1:3 (1 cement: 3 coarse sand) as per Derived rate from HSR item No. 7.21.1 & A & C issued slip No. 1-10 on dated 06.08.2021 |
| 4 | Plain/Reinforcement cement concrete in sub structure complete as per drawing and MORT&H MoRT&H specification 1500,1700 and 2200 PCC grade M15 (with concrete mixture) height upto 5m andinclude the cost of Form work/centering and shuttering etc. as per HSR item No. 27.5 and A & C issued slip No. 1-10 on dated 06.08.2021 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All workbelow plinth level and up to Floor IV level 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) as per HSR item No. 6.1.4 |
| 6 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) Flush / Ruled/ Struck or weathered pointing as per HSR item No. 11.25.1 |
| 7 | Plain/Reinforcement cement concrete M-25 in sub structure complete as per drawing and MORT&H MoRT&H specification 1500,1700 and 2200 with batching plant transit mixture and concrete pumpinclude the cost of Form work/centering and shuttering etc. as per HSR item No. 27.10.1.2 and A & C issued slip No. 1-10 on dated 06.08.2021 |
| 8 | RCC M-20, Using Batching Plant, Transit cum Mixer and Concrete Pump for solid slab super-etructure, 20-30 per cent of labour, material and machinery costinclude the cost of Form work/centering and shuttering etc. as per HSR item No. 27.26.1.1 and A & C issued slip No. 1-10 on dated 06.08.2021 |
| 9 | RCC grade M-25 using Batching Plant, Transit Mixer and cum Concrete Pump For formwork and staging add the following for solid slab super-structure, 20-30 per cent of labour, material and machinery cost height up to 5m include the cost of Form work/centering and shuttering etc. as per HSR item No. 27.28.1.1 and A & C issued slip No. 1-10 on dated 06.08.2021 |
| 10 | Steel reinforcement (Thermo-Mechanically Treated bars of grade Fe-500D or more) for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below above and plinth level as per HSR item No. 6.33.6 & 6.34.6 |
| 11 | Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up to 20mm, covered with sealant complete as per drawing and MoRT&H specifications as per HSR item No. 27.51.3 |
| 12 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1litre for 2 sqm as per HSR item No. 27.49 |
| 13 | Providing and fixing Gate and gearing complete in all respect |
| 14 | Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) as per HSR item No. 7.20.1 and A & C issued slip No. 1-10 on dated 06.08.2021 |
| 15 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per HSR item No. 13.28. |
| 16 | Supply and laying wooden sleepers |
| 17 | Providing and laying dry brick on edge flooring in required pattern with bricks sqm of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks as per HSR item No. 10.34. |
| 18 | Providing and laying in position cement concrete of specifiedgrade excluding the cost of centering and shuttering - All workbelow plinth level and up to Floor IV level in 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size) as per HSR item No. 6.1.6 |
| 19 | 12 mm cement plaster of mix 1:3 on brick walls as per HSR item No. 11.5.2 |
| 20 | Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade in English as per HSR item No. 34.3.2 |
| 21 | Painting new letters & figures of any shade with synthetic enamal paint black or any other approved color to give an even shade borders and arrows upto 6 cm in width |
| 22 | Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade in Hindi |
| 23 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar as per HSR Item No. 5.7.4 |
| 24 | Demolishing R.C.C. work manually/ by mechanical means cum including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - incharge as per HSR Item No. 5.25 |
| 25 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge nominal concrete 1:2:4 or leaner mix as per HSR item No. 5.23.2 |
| 26 | Demolishing dry brick on end edging pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within any lead as per HSR item No. 17.75 and A & C issued slip No. 2 on dated 06.08.2021 |
| 27 | Providing and laying of Filter media with granular of materials/stone crushed aggregates satisfying 710.1.4 of IRC:78 and the requirements laid down in clause 2504.2.2. 2200 of MoRT H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and MoRT&H Specification as per HSR item No. 27.17 |
| 28 | Bituminous Macadam 50 to 75 mm thickness (grading II) with batch type hot mix p lant 100 ·120 TPH Providing and laying bituminous macadam 50-75 mm thick with Batch type hot mix plant 100-120 TPH using crushed aggregates of specified grading premixed with bituminous binder VG -30 @3.4% transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment androlled as per clauses 501.6 and 501. 7 to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications Grading II (19 mm nominal size) as per HSR item No. 17.27.2 and A & C issued slip No. 1 on dated 06.08.2021 |
| 29 | Credit for Old brick lining from dismantling |
| 30 | Credit for old steel from dismatling |
| 31 | Credit for old wooden sleepers 80% of cost = 8000*80% |
| 32 | Credit for old RS Joists @ 80% of cost = 67.20 |
AI Tender Summary
Tender Timeline
Jun 10, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 01, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 13, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender