Repairs And Painting Of All Type Of Steel Furnitures And Gi Charpoys Under Ge Dinjan
Tender Value
15 Lakhs
Estimated cost
Bid Submission
20 Jun 2022
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dinjan → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs And Painting Of All Type Of Steel Furnitures And Gi Charpoys Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old painted iron and steel surfaces (externally and internally including shelves etc) of Almirah Steel Large by scraping and rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler including welding all loose joints and applyinga coat of olive green synthetic enamel paint (1st Grade quality) using spray machine complete all as specified and as directed. (FD-1031/67(M)) |
| 2 | All as per serial item No. 01 above but Almirah Steel Med.(FD-1032/243/67(M)) |
| 3 | All as per serial item No. 01 above but Rack steel 6 tier complete and ditto.FD--106(M) |
| 4 | All as per serial item No. 01 above but Rack steel 3 tier complete and ditto. FD-106(M) |
| 5 | All as per serial item No. 01 above but Table office clerk steel complete and ditto. FD--1004/84(M) |
| 6 | All as per serial item No. 01 above but Locker steel complete and ditto. FD-1029/257 |
| 7 | All as per serial item No. 01 above but Table office officer complete and ditto. FD-1004/84(M) |
| 8 | All as per serial item No. 01 above but Table 900x900x760mm steel complete and ditto.FD-1009 |
| 9 | All as per serial item No. 01 above but Table 3\"x2 with drawer steel complete and ditto. FD-1008 |
| 10 | All as per serial item No. 01 above but Table 3\"x2 without drawer steel complete and ditto. FD--1008 |
| 11 | All as per serial item No . 01 above but Chair steel tubular with arms complete and ditto. (FD-75(M) |
| 12 | All as per serial item No. 01 above but Side rack with tray steel complete and ditto. FD-97(M) |
| 13 | Taking out unserviceable broken leg from Almirah Steel Large and supply and fixing new leg made out of 1mm thick MS sheet suitable for almirah large steel and welded including two coats of synthetic enamel paint over a coat of primer complete all as directed and shown on drawing. (FD--1031/67(M)) |
| 14 | All as per item No. 13.00 above but for almirah steel medium.FD-1031/67(M) |
| 15 | Removing of old unserviceable lock without damaging the adjacent parts of Almirah Steel Large and supply and fixing new MS lock of size 65 mm with 02 numbers stainless steel keys to almirah large steel complete all as directed and shown on drawing. (FD--1031/67(M) |
| 16 | Removing of old unserviceable lock without damaging the adjacent parts of Almirah Steel medium and supply & fixing new MS lock of size 65 mm with 02 numbers stainless steel keys to almirah large steel complete all as directed and shown on drawing. (FD-1031/67(M)) |
| 17 | Removing of old unserviceable handles without damaging the adjacent parts of Almirah Steel Large and supply and fixing new steel chromium plated handles 150 mm long of approved quality complete all as specified and directed. (FD-1031/67(M)) |
| 18 | Removing of old unserviceable handles without damaging the adjacent parts of Almirah Steel Mediumand supply and fixing new steel chromium plated handles 150 mm long of approved quality complete all as specified and directed. (FD-1031/67(M)) |
| 19 | Dismantling carefully and taking out old unserviceable/damaged inside steel lock cover Almirah Steel Large and supply and fixingnew lock cover made out of MS sheet 1mm thick bent to required size and shape as per drawing suitable for three way locking device and fixed with suitable size MS screws for including painting over a coat of primer complete all as specified and as directed. (FD-1031/67(M)) |
| 20 | Dismantling carefully and taking out old unserviceable/damaged inside steel lock cover Almirah Steel Medium and supply and fixingnew lock cover made out of MS sheet 1mm thick bent to required size and shape as per drawing suitable for three way locking device and fixed with suitable size MS screws for including painting over a coat of primer complete all as specified and as directed.(FD-1031/67(M)) |
| 21 | Dismantling carefully and taking out old unserviceable/damaged shelf of Almirah Steel Large and supply and fixingnew shelf made out of MS sheet 1mm thick bent to required size and shape and welding the same properly in position including painting over a coat of primer complete all as specified and as directed. (FD-1031/67(M)) |
| 22 | Dismantling carefully and taking out old unserviceable/damaged shelf of Almirah Steel Medium and supply and fixingnew shelf made out of MS sheet 1mm thick bent to required size and shape and welding the same properly in position including painting over a coat of primer complete all as specified and as directed. (FD-1031/67(M)) |
| 23 | S&Fin relacement with new three way locking device of Almirah Steel Large, 10mm dia, mild steel rod and brass shackels complete with fixing accessories complete all as shown in the drawing and as directed. (FD-1031/67(M)) |
| 24 | S&F including replacement of old existing underviceable three way locking device of Almirah Steel Medium of 10mm dia, mild steel rod and brass shackles complete with fixing accessories complete all as shown in drawing and as specified and as directed. (FD-1031/67(M)). |
| 25 | Removing of old broken drawer from existing TABLE 3\"X2\" WITH DRAWER and providing new steel drawer made of 1mm thick plain black steel sheetand as directed and as shown on drawing. (FD-1007/1008) |
| 26 | Removing and cutting out old unserviceable rusted steel parts from table 3` x 3` with and without drawer and S&F new square tube 20 Gauge all as per the existing specifications including necessary welding etc without any damges to the existing parts and making good (if any) including necessary painting with one coat of synthetic enamel paints (Olive Green) (1st grade quality) over a coat of red oxide primer complete all as specified and shown on drawing.FD-1007/1008 |
| 27 | Removing the existing unserviceable lock from the drawer ofTABLE 3\"X2\" WITH DRAWER/WITHOUT DRAWER and supply & fixing new brass lock with duplicate keys complete as per existing specification and as shown on drawing. (FD-1007/1008) |
| 28 | Removing of old/broken table top TABLE OFFICE OFFICERS STEEL and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated particle board, exterior grade, one side with approved shade and balancing white lamination on other sidewith and including all around second class hard wood beading of 4mmx18mm size fixed with adhesive and panel pins and duly polished with a coat of high glossy french polish complete all as specified and directed and as shown on drawing. (FD-1003/84(M)) |
| 29 | Removing of old damage/unserviceable drawer from existing TABLE OFFICE OFFICERS STEEL and providing new steel drawer made of 1mm thick plain black steel sheet including painting over a coat of primer to match with existingand as specified and as shown on drawing. (FD-1003/84(M)) |
| 30 | Removing the existing unserviceable lock from the drawer of TABLE OFFICE OFFICERS STEEL and supply & fixing new brass lock with duplicate keys complete as per existing specifications completeall as specified and as shown on drawing. (FD-1003/84(M)) |
| 31 | Removing of old unserviceable /broken table top of TABLE OFFICE CLERKS STEEL and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated particle boardexterior grade, one side with approved shade and balancing white lamination on other sidewith an including all around second class hard wood beading of 4mmx18mm size fixed with adhesive and panel pins and duly polish with a coat of high glossy french polish complete all as specified and as shown on drawing. (FD-1004/84(M)) |
| 32 | Removing of old broken drawer from existing TABLE OFFICE CLERKS STEELand providing new steel drawer made of 1mm thick plain black steel sheet including painting over a coat of primer complete all as specified and as shown on drawing. (FD-1004/84(M)) |
| 33 | Removing the existing unserviceable lock from the drawer of TABLE OFFICE CLERKS STEEL and supply and fixing new brass lock with duplicate key as per the existing specification complete all as specified and as sown on drawing.(FD-1004/84(M)) |
| 34 | S&F for seat frame of Chair Steel Tubular with arms made out of well seasoned hard wood (As per existing specifications) including caning as per the existing size using new plastic cane including taking down the existing unserviceable one as shown on drawing and as specified and as directed. (FD-75(M) |
| 35 | S&F for back frame of Chair Steel Tubular with arms made out of well seasoned hard wood (As per existing specifications) including caning as per the existing size using new plastic cane including taking down the existing unserviceable one as shown on drawing and as specified and as directed. (FD-75(M) |
| 36 | S&F formild steel cleatof size 40mm x 20mmx3mm as per the existing size including painting camplete and taking down the existing unserviceable one as shown on drawing and as specified and as directed, (FD-75(M) |
| 37 | M&L for removing old unserviceable Tops from Table Computer and S& F new made out of 18mm thick pre-laminated particles board exterior garde (ISI) marked ) one side teak face & other side white with 4mm thick teak wood beading fixed with fevicol all around complete all as specified and as directed. (FD/E6/MAP/03) |
| 38 | M&L for removing old unserviceable Key board tray fited with telescopic channel from existing table computer and S&F new key board tray fitted with telescopic channel complete all as specified and as directed. (FD/E6/MAP/03) |
| 39 | S&F \"L\" shape hard steel joints of size 450 x 230mm member to be fitted in repair by welding in table computer, made out of 25mm x 25mm mild steel square tube including painting complete all as specified and as directed. (FD/E6/MAP/03) |
| 40 | M&L for removing of oldunserviceable/broken SIDES (Left or Right) of Table bed side map and S&F new dises (Left & Right) made out 18mm thick prelaminated particle board exterior grade (ISI marked) as shown in drawing complete all as specified and as directed. (FD/E6/MAP/15(R)) |
| 41 | M&Lfor removing of old unserviceable/broken TopofTABLEBED SIDE MAP and S&F new side purlin made out 18mm thick prelaminated particle board exterior grade (ISI) markedas shown in drawing complete all as specified and as directed.(FD/E6/MAP/15(R)) |
| 42 | M&Lfor removing of old unserviceable/broken Upper Drawer ofTABLEBED SIDE MAP and S&F new Upper Drawer of Table Side madeout 18mm thick prelaminated particle board exterior grade (ISI) markedas per existing specification as shown in drawing complete all as specified and as directed. (FD/E6/MAP/15(R)) |
| 43 | M&Lfor removing of old unserviceable/broken LowerDrawer ofTABLEBED SIDE MAP and S&F new Lower Drawer of Table Side madeout 18mm thick prelaminated particle board exterior grade (ISI) markedas per existing specification as shown in drawing complete all as specified and as directed. (FD/E6/MAP/15(R)) |
| 44 | M&Lfor removing of old U/s back side ofTABLEBED SIDE MAP and S&F new Back side ofTable Side madeout 12mm thick (7 ply) plywood(ISI Marked) (BWR grade), commercial faces both side as shown in drawing complete all as specified and as directed. (FD/E6/MAP/15(R)) |
| 45 | M&L for removing unserviceable brass chromium plated handle for Table bed side map and S&F for new copper oxide handle to Table bed side map as shown in drawing complete all as specified and as directed. (FD/E6/MAP/15(R)) |
| 46 | M&L for removing oldunserviceable Side (Left & Right) of TV trolley and S&F for new side of TV Trolley made out of18mm thick pre-laminated perticle board both side teak face exterior grade (ISI) Marked) with self) adhesive beading where ever required as shown in drawing complete all as specified and as directed. (FD-E6/MAP/04) |
| 47 | M&L for removing oldunserviceable Top/bottom shelf of TV trolley and S&F new for new Top/Bottom shelf of TV trolley made out out of 18mm thick pre-laminated perticle board both side teak face exterior grade (ISI) Marked) with self adhesive beading where ever requiredd as shown in drawings complete all as specified and as directed. (FD-E6/MAP/04) |
| 48 | M&L for removing old side unserviceable Back of TV Trolley andS&F for new Back of TV Trolley made out of 18mm thick pre-laminated perticle board both side teak face exterior grade (ISI) Marked) with self adhesive beading where ever required as shown in drawing complete all as specified and as directed. (FD-E6/MAP/04) |
| 49 | M&L for removingoldunserviceable glass openable shutter of size 630x655x5.5mm thick with four Nos of nylon washer and two nos. steel hinges Godrej pattern of TV Trolley and S&F for new Glass Openable Shutter of size 630 x 655 x 5.5mm thick with 04 Nos of Nylon washer and 02 Nos steel hinges Godrej Pattern of TV Trolley as shown in drawing complete all as specified and as directed. (FD-E6/MAP/04) |
| 50 | M&L for removing old unserviceable Magnetic Catcher of TV Trolley and S&F for new Magnetic Catcher of TV Trrolley as shown in drawing complete all as specified and as directed. (FD-E6/MAP/04) |
| 51 | Removing old worn out/unserviceable castor wheel from the TV Trolley without damaging the thread and S & F new castor wheel for the TV Trolley and tight with nut bolt and washer as shown in drawings complete all as specified and as directed. (FD-E6/MAP/04) |
| 52 | Removing of old/unserviceable table top from TEAPOY VERANDAH and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated particle board, exterior grade, one side with approved shade and balancing white lamination on other sidewith and including all around teak wood beading of 18mmx4mm size fixed with adhesive and panel pins and duly polished with a coat of high glossy french polish as shown on drawing complete all as specified and as directed. (FD-255/208) |
| 53 | Taking out unserviceable broken leg from LOCKER STEEL and supply and fixing new leg made out of MS sheet1.00mm thicksuitable to locker steel and welded accordingly including 2 coat of painting over a coat of primer by using spray machine as shown on drawings complete all as specified and as directed. (FD-1029) |
| 54 | Dismantling/Taking down old unserviceable hasp and staple without damaging the adjacent parts of LOCKER STEEL and supply and fixing new MS hasp and staple of suitable size as shown on drawing complete all as specified and as directed. (FD-1029) |
| 55 | Taking out old unserviceable broken hinges from locker steel without damaging the adjacent parts of locker steel and supply and fixing new MS hinges of 75mm long of approved quality as shown on drawing complete all as specified and as directed. (FD-1029) |
| 56 | Taking out old unserviceablebow type handle from locker steel without damaging the adjacent parts of locker steel and supply and fixing new bow type handleof 100mm long of approved quality as shown on drawing complete all as specified and as directed. (FD-1029) |
| 57 | Removing old unserviceable plywood top from Charpoy GI pipe with ply top and supply and fixing new Plywood of suitable size 12mm thick ISI marked complete all as specified and as directed. (FD-220) |
| 58 | Taking out exisiting unserviceable nut and bolt from Charpoy GI pipe with ply top and supply and fixing new nut & bolt of suitable size of approved quality complete all as specified and as directed. (FD-220) |
| 59 | Modification of existing Charpoy GI (Newar) as per FD-220 to hard bed with necessary arrangement and fittings as follows including tightening all the component of Charpoy, removal of newar and wooden blocks at bottom of legs complete all as specified and as directed:-(i) Provideing 2 Nos MS flat iron stiffeners of 840 x 35 x 5mm thick size fixed to each GI tube long rail dividing length into equal three parts by welding and drilling holes for bolts.(ii) Providing 4 Nos MS cleats made out of flat iron size 35mm x 5mm x 50mm long on both side of charpoy along short rails (two on head side and two on foot side) by welding a nd drilling holes for bolts.(iii)) Providing MS plate 34mm dia, 3mm thick at bottom of legs welded properly and fixing of 3mm thick rubber sheet under MS plate using adhesive.(iv) Supply and fixing of 12mm thick (7 ply) plywood top with commercial face, boling water resistant (BWR) Grade and type BB as per IS:3030:1989, IS 1328:1996 and IS 848:2006 of size 1980mm x 900mm fixed over the MS cleats, MS stiffeners with chromiumplated screw or bolt 8 Nos , 6mm dia and length not less than 40mm .(v) Stiffeners and cleats shall be finished with painted two coat synthetyic enamel paint over a coat of red oxide primer. |
| 60 | Removing/taking out care fully existing unserviceable ply wood top from Charpoy steel Tubular with hard top and S & F (New) ply wood top 12 mm thick (7 Ply) BWR grade type BB, with commercial face as per existing sixe, fixed to the frame with new steel screws of appropriate sixe all as shown on drawings complete all as specified and as directed. (FD/CWE/DIN/01/2010) |
| 61 | Removing old/unserviceable castor wheel from the computer chair/ chair revolving/ executive chair without damaging the thread and supply and fixing new castor wheel to computer chair /chair revolving/executive chair and tight with nut bolt and washer all as shown indrawings and as directed by Engr-inCharge. |
| 62 | Removing old unserviceable nylone newar from chair verandah and S&F new PVC white seat of required size complete all as specified and as directed. (FD-19(M)/256/FD-MAP) |
| 63 | Removing old unserviceable nylone newar from chair verandah and S&F new PVC white back of required size complete all as specified and as directed. (FD-19(M)/256/FD-MAP) |
| 64 | M&L in repairs running welding not exceeding 6mm thick of metal to be welded to broken steel part of all types of steel furniture including grinding in repairsNote : Cost element for hire charge of T & P is deemed to be including in the unit quoted rate |
AI Tender Summary
Tender Timeline
May 30, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender