Providing Pipeline To The Cross Streets Of Pudhu Nagar And Improvements To The Water Supply System At Sembadapet In Nettapakkam Village ( 6Th Call )
Tender Value
1.18 Lakhs
Estimated cost
Bid Submission
15 Jun 2022
0 days left
EMD
2364
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nettapakkam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Pipeline To The Cross Streets Of Pudhu Nagar And Improvements To The Water Supply System At Sembadapet In Nettapakkam Village ( 6Th Call )
BOQ
| Sl. No. | Item Description |
| 1 | Code : No : 2.8.1 : Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil |
| 2 | Code : No : 31.161.1E : Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore /Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 90mm dia. |
| 3 | Code : No : 31.161.1D : Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, UPVC specials such as bends,tees, threaded pieces, couplers, reducer,endcaps etc., complete all as per IS and CPWD specification. - 75mm dia. |
| 4 | Code : No : 31.164.1K : Providing and fixing in position UPVC moulded equal Tee (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete -90mm dia |
| 5 | Code : No :31.168.1L : Providing and fixing in position UPVC moulded elbow (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing,jointing materials etc, complete - 90mm dia |
| 6 | Code : No : 31.167.1I : Providing and fixing in position UPVC moulded reducer coupler (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 90 x 75mm dia |
| 7 | Code : No : 31.173.1B : Providing and fixing in position UPVC moulded saddle set (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 75 x 20mm dia |
| 8 | Code : No :31.160.1A Providing, laying and jointing UPVC pipes(Finolex /Jain / Supreme / Truebore / Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site,lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, UPVC specials such as bends, tees, threaded pieces, couplers, reducer,endcaps etc., complete all as per IS and CPWD specification. - 20mm dia. |
| 9 | Code : No : 4.1.10 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) |
| 10 | Code : No : 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 11 | Code : No :31.48.2A: Providing and fixing C.I. sluice valve (PN 1) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 80 mm dia. |
| 12 | Code : No : 31.256.1C: Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer /L&T /Siemens make) with suitable M.S.angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5)Supplying and fixing of fully automaticair break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer /L&T/Siemens make) with suitable M.S.angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5) |
| 13 | Code : No : 18.34.1 : Constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand)for sluice valve, with C.I.surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular bricks of class designation 7.5 |
| 14 | Code : No : 18.12.2: Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.-External work -20mm dia nominal bore |
| 15 | Code : No : 31.131.1A : Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 80 mm dia. |
| 16 | Code : No :31.169.1I : Providing and fixing in position UPVC moulded male threaded adopter (Finolex /jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 110 x 90mm dia |
| 17 | Code : No :31.273.1C : Supplying,fixing and lowering into the borewell the GI pipes of medium class (TATA,TNT,Nezone, Apollo,Zenith) which are to be connected to the submersible pump,including labour charges, jointing materials etc.,complete.-80 mm dia |
AI Tender Summary
Tender Timeline
May 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender