}

Repair And Replacement Of Ac Sheet False Ceiling Works At Prc Mes Asc Dad And Minor Units At Ramgarh Cantt, ramgarh-Jharkhand

Military Engineer Services-MES has published Repair And Replacement Of Ac Sheet False Ceiling Works At Prc Mes Asc Dad And Minor Units At Ramgarh Cantt. Submission Date for this Tender is 27-06-2022. Civil Work Tenders in ramgarh Jharkhand. Bidders can get complete Tender details and download the document.




Tender Notice

32436139
Corrigendum : Repair And Replacement Of Ac Sheet False Ceiling Works At Prc Mes Asc Dad And Minor Units At Ramgarh Cantt
Open Tender
Indian
Jharkhand
ramgarh
27-06-2022

Tender Details

Repair And Replacement Of Ac Sheet False Ceiling Works At Prc Mes Asc Dad And Minor Units At Ramgarh Cantt

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 20-Jun-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 27-06-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 36000.0 /-
Tender Value
INR 18 Lakhs /-

BOQ Items

Name of Work : Repair and replacement of AC sheet, false ceiling works, at PRC, MES, ASC, DAD and Minor units at Ramgarh Cantt.
Sl. No. Item Description
1Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings sheet, complete all as specified and directed.
2S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
3S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws complete all as specified and directed.
4Dismantling wrought or mild steel work of any description and in any position complete all as specified and directed.
5M & L for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and welding counter sunk for holes and necessary gusset plates etc and similar work conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge.
6M & L for preparation of new surfaces on wall of any description using sand paper and applying two coats of cement base paint, complete all as specified and as directed.
7Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.
8S & F 6mm thick cement corrugated sheet fixed with "L" type or "J" type or cranked hook bolts, complete all as specified and as directed.
9All as per item No.8, here-in-before butexcept sheeting, complete all as specified and as directed.
10S & F two piece adjustable serrated cement sheet ridge 6mm thick for corrugated or semi corrugated sheet, complete all as specified and as directed.
11M & L for 1.4mm thick firbre glass reinforced translucent sheeting in roof, walls etc., fixed with L-type or J-type or cranked hook bolts etc., complete all as specified and as directed.
12Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.)including cover fillet, complete all as specified and directed.
13Dismantling of wooden scantling 40 Sqm and over in section fixed in any position as in unframed work, complete all as specified and as directed.
14Dismantling of wooden fillets, rails, posts, purlins, etc. under 40 Sq cm in section, complete all as specified and as directed.
15S & F second class hardwood scantling, clean sawn in any position and any description, complete all as specified and directed.
16S & F for secondclass hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc. 6 sqcm but not exc. 13 sqcm complete all as specified and directed.
17S & F for secondclass hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc. 13 sqcm but not exc. 25 sqcm, complete all as specified and directed.
18M & L for providing aluminium snap grid frame work for false ceiling with size 605x605 mm, using Main and cross tee of size 36.5mm x 25mm x 1.4mm, weighing0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mm x 25 mm x 2 mm weighing 0.36 Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia mild steel wire/GI wire, J bolts, nuts and washers as per manufacturer"s, complete all as specified and as directed.
19M & L for non asbestos fibre cement building board 4mm thick in ceiling fixed or laid/inserted to timber/GI/Aluminium frame work with screw, complete all as specified and as directed.
20M & L for 4mm thick non-asbestos cement building board fixed to timber framed work with screws, complete all as specified and as directed.
21M & Lpreparation or new asbestos cement plain building board on ceiling surfaces and applying two coats of oil bound distemper, complete all as specified and as directed.
22Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed.
23Demolition of brick work or stone / boulderor concrete block masonry includingall quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.
24M & L for brick work with sub class "B" bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and as directed.
25All as per item No.24, here-in-before butexcept bricks.
26M & L for plastering 15mm thick on brick surfaces other than fair face of brickwork in CM 1:4, finishing surfaces even and fair without using extra cement complete all as specified.
27M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.
28M & L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in coping etc.,complete all as specified and directed.
29M & L for 25 mm thick Cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in roof padding of RCC roof including finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed.
30Supply only liquid integral water proofing compound of an approved make.
31Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
32Material and labour for rendering 15mm thick in CM(1:4) finishing surface even and smooth without using extra cement, on surfaces of brickor concrete surfaces, complete all as specified and as directed.
33M & L for preparation of new surfaces on wall of any description using sand paper and applying two coats of cement base paint, complete all as specified and as directed.
34M & L for preparation ofnew wooden basedsurfaces of any description not otherwise described over 10cm width or girth applying two coats synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-In-Charge .
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail