|
| 1 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materialsfor taking creditand making good disturbed surfaces of walls, floors, etc. |
| 2 | Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes. |
| 3 | Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing adjacent to main switch board including making good to disturbed surfaces to match with existing surfaces. |
| 4 | Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfacesto match with the existing surfaces. |
| 5 | Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade concelled conduit not less then 20 mm widthwith MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface allas directed and specified.Make of cable - FINOLEX / PLAZA / HAVELLS / POLYCAB & Make of PVC conduit & conduit accessories - PLAZA /PRESSFIT/KALINGA.Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii Rate is inclusive of cutting/chases of wall/floor/ceiling. |
| 6 | One light point controlled by one, one way switch. |
| 7 | One ceiling /exhaust fan point controlled by one switch and regulator. |
| 8 | One 3 pin 5 amp socket out point on the same board with other switches. |
| 9 | One3 pin 5 amps socket out let point on independent board |
| 10 | One bell/buzzer point controlled by one bell push. |
| 11 | One light point controlled by two 2-way switches. |
| 12 | Same all as Item Srl No 5above but for one socket outlet 15 Amp on independent boardwith2.5Sq mmcableand1.5Sq mmearthwire. |
| 13 | S &F Switch piano flushtype single pole one way 5 Amps. |
| 14 | S &F Switch piano flush button typeTwo way 5 Amps. |
| 15 | S &F Socket out let 2 in one, 5/3 pin 5 Amps . |
| 16 | S &F Switch socket combination 5 Amps 5 pin flush type. |
| 17 | S &F Switch socket combination 5 in 1, 5 pin5/15 Amps flush type universal . |
| 18 | S &F Ceilingrose, surface bakelite 65x50 mm three terminal. |
| 19 | S &F Call bell AC-230 Volt single pole ding dong. |
| 20 | S &F Bell push, flush type 5 Amps. |
| 21 | S &F Electronic regulator 100/120 Watt step type. |
| 22 | S &F Lamp holder insulated body with back platefor angle holder all as perspecified. |
| 23 | Note for Item Srl No 07 to 16.Make - Havells/Anchor/Polycab |
| 24 | S &F in repair LED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 20/36 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronicDriver, connector block etc. with all assoceries intenallt prewired &includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable forand mounting clampsPVC squre box 75 x 75mm - 2 nos etc. Make- Havells 20 Watt LED cool day light spectrabatten (White LHEXARP7IN1W020-PK1), Or Bajaj 36 w Lvora LED Batten 830337, or Philips -61018 20 W 4ft cool day light Astra line LED tube light. |
| 25 | S &F in repairLED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 10 Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronicDriver, connector block ect. with all assoceries intenallt prewired &includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable forand mounting clampsPVC squre box 75 x 75mm - 2 nos etc. Make- Philips ultron 17 Watt wall light (cool white round) or Jaquar LED Luke wall light 5 Watt, or Havells LED Streek track light 7 Watt white. |
| 26 | Supply and fix in repair LED security light fitting of 40/45 watt, for bldgsecurity aluminium pressure dia cast IP 66 with high power LED & LED driver of make Bajaj/Havells/Philips. |
| 27 | S&F in repair Surface mounting round, decorative LED down lighter `15 WATT and transulent defuser, prefixed with flat profileand mounting clamps etc., complete all as perBAJAJ/ Havells/Philips. |
| 28 | S&Fin repair LED light fittings decorative 36/34 Watt recess mounting 2\" x 2\" type extruded metal/aluminium body,andelectronic LED driver, connector block ect. with all accessories internal prewired &including connecting up with 2 core flexible cppper conductor cable with suitable sizeand mounting clamps etc.Make- Havells plano 2x2 grid panel 42 watt or Jaquar 24 w ultima ultra 2 x 2 high lumen panel or Philips lighting RC370B24-Watt LED Recessed full glow2 x 2 panel (cool day light, white). |
| 29 | S & F in repair globe light 24 Watt mounted on wall energy efficient, water resistant E27 base of size 25.5 x 20.5 x 25.5 CM with 18-24 watt LED bulb with white colour all as specified and directed by Engr-in Ccharge.Make Philipscat/product No 71797/46/31 24-watt mygarden wall light (white and Synthetics) or havells cat/ code No LHFOAJE1TZ1/060 (Havells floretine 1 LS wall light SS or equivalent of Jaquar. Note :-LED bulb ratewill included in coated rate and in case of unavaibility ofequivalent make ,spesified product of mentioned Cat/Ordershall approve for installation. |
| 30 | Taking down and dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spareparts will be measured & paid separately) including necessary lathe work for fixing of bush/bearinggreasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400/1500mm sweepfan :- |
| 31 | (i)Split pin - 02 Nos |
| 32 | (ii) Connection block - 1 No |
| 33 | (iii) Insulation rubber bush. - 01 No |
| 34 | Fixing or hanging only ceiling fan after winding fan under item No. 23 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed. |
| 35 | Same all as Item Srl No 23 here-in-above but exhaust fan of size 225 mm to 450 mm sweep (except rubber roll, split pin). |
| 36 | Fixingonly Exhauestfan after winding fan under Iterm Srl No 25 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed. |
| 37 | Same all as Item Srl No 23here-in-above but air circulater fan of size 600 mm to 750 mm sweep (except rubber roll, split pin). |
| 38 | Fixingonly air circulaterfan after winding fan under item No. 27 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed . |
| 39 | Same all as Item Srl No 23here-in-above but wall fan of size 300 to 400 mm sweep (except rubber roll, split pin). |
| 40 | Fixingonly wallfan after winding fan under Item Srl No 29 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed . |
| 41 | Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down. Note- (i)Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (ii) The spares requiredshall be measured and paid separately in the relevant items). |
| 42 | Taking down exhaust fan, of any size and type & cleaning/servicing and overhauling the same, refixing the same on its existing position and connection up. |
| 43 | Supply, fixing and connecting up flexible copper wire twin core of 23/.0078. |
| 44 | Supply only gun metal bush of any size (Make - MSP). |
| 45 | Supply only bearing for ceiling fan (Make - TATA/SKF No.6201/6202). |
| 46 | Supply only bearing for ceiling fan (Make - TATA/SKF No.6203/6204). |
| 47 | Supply only fan condensor 2.5 MFD (Make – USHA / UNIVERSAL). |
| 48 | Supply only fan condensor 4 MFD (Make – USHA / UNIVERSAL). |
| 49 | Supply only split pin. |
| 50 | S&F canopy of ceiling fan bottom and upper side of size 1200/1400/1500mm Make :- Usha / Orient / Keasal / Himadri / Thermacool / Jetairway |
| 51 | Painting of ceiling fan 1200/1400 mm sweep complete including fan blade down rod with synthetic enamelled paint of white tint including cleaning and removing dust and dirt and making smooth surface for painting including writing MES Nocomplete all as specified. |
| 52 | Supply & fix fan blade made out of aluminium alloy suitable for wall mounting fan of size 300 to 450 mm. |
| 53 | Supply & fix GI tubing light grade 40 mm dia use as down rod of ceiling fan, cut to required length & including drilling of hole at both side. |
| 54 | Supply & fix GI tubing light grade 20 mm dia use as down rod of ceiling fan, cut to required length & including drilling of hole at both side. |
| 55 | Supply & fix GI tubing light grade 15 mm dia use as down rod of ceiling fan, cut to required length & including drilling of hole at both side. |
| 56 | S & F in repairs Mild steel work in framed work such as Fan hooks, Clamps, gratings, ladders etc., with ends of bars welded and/ or riveted, or forgedand similar work confirming to Fe 410 - O or Fe 310 - O and incl painting to surfaces using two coats of metallic primer and a coat of synthetic enamelled paint of desired colour as directed. |
| 57 | Fabricate, supply & fix GI pipe bracket 25 mm dia- 0.9 m long & 2 set of clamps made out of 30 x 5mm ms flat & fixed with anchor bolt suitable for 25 w ssecurity light fitting. |
| 58 | S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 20/25 amp, flush mounting typeLEGRAND/ABB/L&T |
| 59 | Taking down ceiling fan /EXHAUST FAN of any size or make. |
| 60 | Hanging only ceiling fan 1200mm/1400mm/1500mm during wiring Sweep by providing fan hooks in proper manner and making connection with3 core copper cable including painting all as per specified and directed by Engr-in-Charge. |
| 61 | FIXING ONLY Exhaust fan 230/250/300/380/450 sweep heavy duty including 3 core copper cable & cutting holes if required etc. |
| 62 | SUPPLY & FIX capacitor 2.5/4 mfd suitable for ceiling fan/exhaust fan |
| 63 | Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces. |
| 64 | MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link,IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door, L&T / LEGRAND / SCHNEIDER |
| 65 | MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 230 Volts SPN with 4 way Double door IP-43-IK09 protection grade, L&T / LEGRAND / SCHNEIDER |
| 66 | MCB DB made of sheet steel, powder painted withNUTRAL bus bar 200 A, neutral link, earth bar and Din rail, 230 Volts SPN with 8 way Double door, IP-43-IK09 protection grade, L&T / LEGRAND / SCHNEIDER |
| 67 | MCB DB made of sheet steel , powder painted withNUTRAL bus bar 200 A, neutral link, earth bar and Din rail, 230 Volts SPN with 12 way Double doorIP-43-IK09 protection grade, L&T / LEGRAND / SCHNEIDER |
| 68 | Note for Item Srl No 54 to 57 :-(i) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tobe fixed on wall including framemade out of MS flat 40 x 5mm.(ii) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface (iii) MAKE OF DB & MCB-L&T / LEGRAND / SCHNEIDER |
| 69 | S&F in repair of Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sq mm, earth continuity conductor of size 2.5 Sq mm to be drawn through and including PVCconduit 25 mm dia medium grade conceled in walls/roof/floorsall as directed by Engineer in Charge.Notes :- (i)Two wires of 4 Sq mm and one wire of 2.5 Sq mmand one run of PVC conduit shall be measured as one unit. |
| 70 | S&F in repair of Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sq mm, earth continuity conductor of size 4 Sq mm to be drawn through and including PVCconduit 25 mm dia medium grade conceled in walls/roof/floorsall as directed by Engineer in Charge.Notes :- (i)Two wires of 6 Sq mm and one wire of 4 Sq mmand one run of PVC conduit shall be measured as one unit. |
| 71 | MCB TPN 415 Volts, \"C\" series, breaking capacity 10 KA of rating 63 Amps. |
| 72 | MCB SPN 240 Volts, \"C\" series, breaking capacity 10 KA of rating 63 Amps. |
| 73 | MCB SPN 240 Volts, \"C\" series, breaking capacity 10 KA of rating 6-32 Amps. |
| 74 | MCB SP 6-32 Amps\"C\" series, breaking capacity 10 KA of rating. |
| 75 | Note for Item Srl No 60 to 63 :MAKE OF MCCB & MCB- L&T / LEGRAND / SCHNEIDER |
| 76 | M & L earthing complete with galvanized steel earth plate electrode 600mm x 600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6 mm alum flatincluding earthingpit, charcoal common salt, Earthing lead 4.00mm dia up to 7.5m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pitcover including earth work complete all as shown in electrical plate No-3 of SSR-1991 (Part-I). |
| 77 | Same all as Item Srl No 64above but galvanized earth strip 32 x 6 mm complete. |
| 78 | Supply & Fix LED bulb of 7 Wattmake of Havells/Philips/Crompton |
| 79 | Supply & Fix LED bulb of 9 Wattmake ofHavells/Philips/Crompton |
| 80 | S &F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directedMake SUDHIR,PHILIPS,CROMPTON. |
| 81 | S &F Copper strip 32 x 6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground. |
| 82 | S&F MCCB 250 A 35 KA,4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider |
| 83 | S&F MCCB 200 A 35 KA,4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider |
| 84 | S&F MCCB 160 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider |
| 85 | S& F MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link,IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , L&T CAT NO-DBVTL004DD/ LEGRAND CAT NO-607913/ equivalent of ABB |
| 86 | Supply & Fix single phase KWH meter with LCD display with box of rating 10-60A all as directed by Engr-in-Charge.Make - Benlo, HPL, L&T. |
| 87 | Supply & Fix three phase four wireKWH meter with LCD display with box of rating 10-60A counter type all as directed by Engr-in-Charge.Make - Benlo, HPL, L&T. |
| 88 | Supply & fix in repairs single pointed air termination aluminium rod 12mm dia, 300 mm long complete all as specefied and directed by Engr-in -Charge. |
| 89 | Supply & fixin repairs aluminium strip 25mm x 3mm complete with saddles and fixing screws for fitting the stripall as specefied and directed by Engr-in -Charge. |
| 90 | Supply and fixin repairs GI strip 32mm x 6mm buried in ground all as specefied and directed by Engr-in -Charge. |
| 91 | M & Lin repairsfor Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specefied and directed by Engr-in -Charge. |
| 92 | M&Lin repairs for cable protection GI tubinglight gradewith all fitting and fixture fixed long the pole/under road/along the wall of size 40mm bore with necessary clamps completed all as specified and directed. |
| 93 | Supply & Fix in repairLED light fitting 1x100 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete with all accessories, connecting up with twin core twisted flexible copper conductor cable all as specified and directed. Make SUDHIR, PHILIPS, CROMPTON. |
| 94 | Supply & Fix in repair energy saving environmental friendly and robust , open type vertical highbay long life, exclusive innovative die-cast aluminium IP 66 industrial light with high power COB LEDs as light source, suitable for highlighting retails space 100 watt LED replacement metal halide industrial light luminarie for in side work shop 506 ABW complete with all accessories, connecting up with twin core twisted flexible copper conductor cable all as specified and directed. Make Philips, Havells, Wipro. |
| 95 | S&F in repairs XLPE insulated armoured and PVC sheathed \"heavy duty\" electric cable with aluminium conductor 1100 volts grade laid in trenches/wall passing through pipes /ducts including testing complete of following cross sectional area of the following sizes.Note :- Rate is inclusive of cable gland & cable lugs. Make : Havells/PolyCab/Finolex. |
| 96 | 2 core, 4 sqmm cross sectional area |
| 97 | 2 core, 6 sqmm cross sectional area |
| 98 | 2 core, 10 sqmm cross sectional area |
| 99 | Schedule of credit amount of Rs. 2,11,050.00 to be deducted during AOC |
