Repair Renovation Of Lab Cum Store At Rhrts Jachh (Kangra).
Tender Value
9.43 Lakhs
Estimated cost
Bid Submission
07 Jun 2022
0 days left
EMD
19000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Renovation Of Lab Cum Store At Rhrts Jachh (Kangra).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer\"s specification and direction of Engineer-in-charge. |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI) non decorative type,coreof blockboard constructionwithframeof1st classhard wood andwell matched teak3 ply veneering with vertical grains or cross bands andface veneers on both faces of shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge.a). 35mmthickincludingISI marked Stainless Steel butt hinges with necessary screws |
| 3 | Providing and fixing ISI marked oxidized/ Cromium plated M.S.sliding door bolts with nuts and skrews etc. complete in all respect as per satisfaction of Engineer-in-Chargea). 250x16mm (Two hundred fifty into sixteen milimetre) |
| 4 | Providing and fixing ISI marked oxidized// Cromium plated M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 200x10mm (Two hundred into ten milimetre) |
| 5 | Providing and fixing ISI marked oxidized// Cromium plated M.S.Handles conforming to IS: 4992 with necessary screwsetc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 125mm ( One hundred twenty five milimetre) |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primeretc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 7 | Providing and fixing 1st quality ceramicglazedtiles (Kazaria / Nitco / Oreintbell make)conformingto IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy,bottlegreen,blackof any size as approved by Engineer-in-Charge inskirting,risersofsteps and dado over 12 mm thick bed of cement Mortar 1:3(onecement:three sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metreincludingpointinginwhitecementmixedwithpigment of matching shade etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 8 | Providing and laying antiskid vitrified floor tiles full body in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/ JINDAL MAKE) |
| 10 | Providing and fixing precoated galvanised steel sheet Ridges plain (500 - 600mm) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/ JINDAL MAKE) |
| 11 | 15 mm (fifteen milimetre thick) cement plaster on rough side of single or half brick wall of mix with cement mortar 1:4 (one cement: four sand) complete in all respect as per satisfaction of Engineer-in-Charge. |
| 12 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 13 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade etc. all complete as specified and as directed by the Engineer-in-Charge. a)Two or more coats on new work |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Two or more coats on new work. |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. in all respect as per satisfaction of Engineer-in-Charge. |
| 16 | Wall paintingwithplasticemulsionpaintofapproved brandandmanufacture to give an evenshade etc. in all respect as per satisfaction of Engineer-in-Charge..a) Oneor more coats on old work |
| 17 | Paintingwithsyntheticenamelpaintof approved brandand manufacture of required colour to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge..a) Oneor more coats on old work |
| 18 | Finishing walls with Acrylic Smooth exterior paint of Required shade etc. in all respect as per satisfaction of Engineer-in-Charge. a). Old work (Two or morecoatapplied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 19 | Renewingglasspanes, withputtyand nailswherever necessary including racking out the old putty etc. in all respect as per satisfaction of Engineer-in-Charge a).Floatglasspanes ofnominal thickness4 mm (weight not less than 10kg/sqm) |
| 20 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all leads etc. complete as per direction of Engineer-in-charge. a). In cement mortar |
| 21 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Area 3 sq. metres and below. |
| 22 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within all lead etc complete in all respect as per satisfaction of Engineer-in-Charge. |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete in all respect as per satisfaction of Engineer-in-Charge (Cera/ Hindware make). a) W.C. pan with ISI marked white solid plastic seat and lid. |
| 24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillartaps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete in all respect as per satisfaction of Engineer-in-harge (Hindware/ Cera Make).a). White Vitreous China Wash basin size 630x450 mm with a single of 15 mm C.P.brass pillar taps |
| 25 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto one metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 26 | Providing and fixing 32mm dia Semi rigid pipe P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete in all respect as per satisfaction of Engineer-in-Charge. |
| 27 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 28 | Providing and fixing G.I. pipes medium grade complete with G.I. fittings including trenching and refilling etc. complete in all respect as per satisfaction of Engineer-in-charge. (Jindal / Surya make) a). 15 mm dia nominal bore |
| 29 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete in all respect as per satisfaction of Engineer-in-Charge (Sieko/ Sparton/ Smile make). |
| 30 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete in all respect as per satisfaction of Engineer-in-Charge(Sieko/ Sparton/ Smile make |
AI Tender Summary
Tender Timeline
May 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender