Open Gym And Balvatika Chitalwana Area O Open Air Gym Item- 2 Surfing Board-ProvidingandfixingofSurfingBoardofsizenotless than1000mm (Length) x 600mm(Width)x1400mm (Height),to buildup the muscle groups of the waist, enhance the body coordinationand fle, raniwara-Rajasthan

Open Gym And Balvatika Chitalwana Area O Open Air Gym Item- 2 Surfing Board-ProvidingandfixingofSurfingBoardofsizenotless than1000mm (Length) x 600mm(Width)x1400mm (Height),to buildup the muscle groups of the waist, enhance the body coordinationand flexibility. The main structure frame shall be made from G.I. pipe minimum of80NBC classweldedwithM.S.roundbaseplateatleast ø250mm&10mmthick.Thefootrestsshallbemadefromhighquality fiberreinforcedplastic material.High tensilesteel with galvanized nut boltsshallbe usedforassembly. Thepowdercoatingshallbedone with Pure Polyesterpowder of Ackzonoble /Berger/ Nerolacwithminimum60 to70micronthickness,completeinallrespectincludingfixingtheM.S. holdfast in cement concrete to hold the whole structure, under the directionsofEngineer-in-charge tofullfilthefunctionalrequirement.The indicative Design/Photo isasper enclosedPhoto No. 1.(Thecement concrete and excavationwork shall be paid separately). 3 Crosstrainer- Providing andfixingofCrosstrainerofsizenotlessthan1320mm (Length)x600mm(Widux 1750mm.(Height),to enhancethemobilityof upperandlowerlimbsandimprovetheflexibilityof joints.Themain structureframeshallbe madefromG.I.pipeminimumof80NC class weldedwithM.S.roundbaseplateatleastø250mm&10mmthick.The HandFrameshallbemadeupor atleast25NBC ClassG.l.Pipe.The footrestsshallbemadefremAluminumcastingmaterialofsizenotless than130mmX310mm X 5mmthicknessamountedonM.S.PlateofSize 130mmx310mmx3mmthick.Hightensilesteelwithgalvaniz[3:25pm, 25/02/2022] Prasoon:nutsand boltsshallbe used forassembly. [3:32pm, 25/02/2022] Prasoon: used for assembly. Thepowdercoating shallbe donewith Pure PolyesterpowdersofAckzonoble/Berger/NerolacPaints with 60to70 Micronthickness,completein allrcspectincludingfixing the M.S. holdfastincementconcretethe directionsof Engineer-in-charge to fullfiI. (The cemmt concrete and excavation work shall be paid separately). 4 THAI-CIHSPINNER (2 WHEEL)- ProvidingandfixingofThi-Chispinner(2Wheel)ofsizenotlessthan 700mm(Length)x1000mm(Width)x1280mm(Height),toincrease mobilityof shoulder -elbow andhip-knee. Themain structure frame shall be made fromG.I.pipe minimumof 80NB CclassweldedwithM.S. roundbaseplate atleastø250mm&10mmthick.HightensileS.S.nut bolts shallbeusedfor assembly. Thepowder coatingshallbe done with Pure PolyesterpowdersofAckzonoble/Berger/NerolacPaints with 60to70 Micronthickness,completein allrcspectincludingfixing the M.S. holdfastincementconcreteto hold the whole structure under the directionsof Engineer-in-charge to fullfiI the functional requierment. (The cement concrete and excavation work shall be paid separately). 5 SEATED PULLER-ProvidingandfixingofSeatedPuller of size not less than 1900mm(Length) x 740mm (Width) x 1920mm . (Height), to enhance the Strength of upper limbs and the muscle in chest and back and promote cardiopulmonary function. The main structure frame shall be made from G.I. pipeminimumof80NBCclassweldedwithMS.round base plate atleast250mm & 10mmthick. The handle frame shallbeminimumof 32NBC ClassG.l. Pipe. The seat frame minimum of 32NB C class G.l.Pipe. Closing Cape shall be made up of high quality Fiber rainforced Plastic material. Hightensile steel with galvanizednut bolts shallbeusedfor assembly. Thepowder coatingshallbe done with Pure PolyesterpowdersofAckzonoble/Berger/NerolacPaints with 60to70 Micronthickness,completein allrcspectincludingfixing the M.S. holdfastincementconcreteto hold the whole structure under the directionsof Engineer-in-charge to fullfiI the functional requierment. (The cement concrete and excavation work shall be paid separately). 6 LEG PRESS- Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhancethe strengthofwaist. The mainstructureframe shallbemade from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast ø250 mm &10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shallbe made from casted Aluminummaterial, having sizes minimum of 130mm X 310mmX 5mm thick. ClosingCapsshallbemadeupofhighqualityFiberreinforced Plastic material. High tensile steel with galvanized nut bolts shall be used forassembly.ThepowdercoatingshallbedonewithPurePolyester powder of Ackzonoble/Berger/ Nerolac with 60 to 70 micron thickness, completeinallrespectincludingfixingtheM.S.holdfastincement concrete to hold the whole structure, under the directions of Engineer-in­ charge to fullfil the functional requirement.(The cement concrete and excavationwork shall be paid separately). 7 SIT UP BOARD DOUBLE- Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The mainstructure frame shallbe madefromG.I.pipe minimumof 80NB C class weldedwithM.S. round baseplate atleast ø250mm&10mmthick.Theremainingframeofthesitupboard minimum of 32mm NB shall be made from C class GI pipe. The powder coating shallbedonewithPurePolyesterpowderAckzonoble/Berger/NerolacPaintswith60to 70micronthickness,completein allrespect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid separately). 8 CHEST PRESS- Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbsandthe musclesin chest& backandpromotecardio-pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. roundbase plate atleast 250 mm & 10mmthick. Thehandle frame shallbemadeupfromatleast32NBC class G.I. pipe.Theseats andBackrests tobe fittedontheouterframes shallbemadeupof M.S.Sheetofsizenotlessthan330mmX 300 mmX2mmthickness . Closing Caps shallbe made up of high quality Fiber reinforcedPlastic material. High tensile steel with galvanizednuts & bolts shallbeusedforassembly.Thepowdercoating shallbe done withPure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, Completeinallrespectindudiugfixing theM.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid separately). 9 PommelHorse- ProvidingandfixingofPommelHorseofsizenotlessthan2150mm (Length)x 800mm (Width) x 800mm. (Height), to enhance theflexibility oflowerlimbs ,waistandabdomen.Themainstructureframeshallbe made from G.I. pipe minimum of 80NB C class welded withM.S.round base plate atleast 0250 mm & 10mmthick. Thehandle frame be minimum of32NB shallbemadefrom C Class G.I.pipe.ClosingCapsshallbe madeupofhighqualityFiberreinforcedPlasticmaterial.Hightensile steelwithgalvanizednutsandboltsshallbeusedforassembly.The powdercoatingshallbedonewith PurePolyesterpowderAckzonoble/ Berger/NerolacPaintswith60to 70micronthickness,completeinall respect including fixing the M.S. holdfastIn cement concrete toholdthe whole structure,underthedirectionsofEngineer-incharge to fullfilthe functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid seseparately) 10 DOUBLE STANDING TWISTER- ProvidingandfixingofDoubleTwisterStandingofsizenotlessthan 1500mm(Length)x600mm(Width)x1300mm.(Height),toenhance flexibility of waist. The main structure frame shallbe made from G. I. pipe minimumof80NBCclassweldedwithM.S.roundbaseplateatleast 0250 mm &10mm thick. Thehandleframe isminimumof 25NB shall be madefromCclass G.I.pipe.TheTwisterplatetobefittedonthe bottomframeshallbemadeupofM.S.RoundPlateofminimumsize 0300mm and10mmthick. ClosingCaps shallbe made up of high quality FiberreinforcedPlasticmaterial.Hightensile steelwithgalvanizednuts andbolts shallbeusedforassembly.Thepowder coatingshallbe done withPurePolyesterpowdersfromAckzonoble/Berger/NerolacPaints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfastincementconcretetoholdthe whole structure,underthe directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid seseparately). 11 Seating & Standing Twister- Providing and fixing of Seating & Standing Twister of sizenotlessthan 1700mm(Length)x540mm(Width)x1250mm.(Height),toenhance flexibilityofwaist.suitableforpeopleof differentagesexceptchildren . The main structure frame shallbe madefrom G.I. pipe minimum of 80NB C classweldedwithM.S.roundbaseplate atleast0250mm&10mm thick . The bottom frame of the Seating & Standing twis ter be atleast of 32 NB, 50 NB, and 25 NB shall be made from C classG.I. pipe . The handle frame of Seating &Standingtwis terofminimum25NB &Footresting frame of seating side shallbemade from C class G.I. pipe minimu m o f 25mmNB.The Twisterplatetobe fittedonthebottomframe shallbe madeupofM.S.RoundPlateofminimumsize300mmdiameterand 10mmthickness.ClosingCapsshallbemadeup ofhighqualityFiber reinforced Plastic material. High tensile steel with galvanizednuts &bolts shallbeusedforassembly.Thepowdercoating shallbedonebyPure Polyester powderofAckzonoble/Berger/NerolacPaintwith60to70 micron thickness, complete in all respect including fixing the M.S. holdfastincementconcretetoholdthe whole structure,underthe directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid seseparately). 12 CHEST CUM SHOULDER PRESS- ProvidingandfixingofChestPressCumSeatedPullerofsizenotless than 2000mm(Length)x710mm (Width)x2200 mm(Height), toenhance thestre ngth ofupperlimbsandthemusclesinchestandshoulder.The main structureframe shallbemadefrom G.I. pipe minimumof80NB C class weldedwithM.S.roundbase plate atleast 0250mm & 10mm thick . Theseats andBackrests tobe fitted on the outer frames shallbe madeup minimumofM.S.Sheetofsize330 mmX300 mmX2mmthickness. ClosingCapsshallbemadeupofhighqualityFiberreinforcedPlastic material.Hightensilesteelwith galvanizednuts &bolts shallbeusedfor assembly. Thepowder coating shall be done with Pure Polyesterpowders from Ackzonoble/Berger/Nerolac Paints with 60to 70 micronthickness, complete in allrespectincludingfixingtheM.S. holdfast Incement concrete tohold the whole structure,under the directions ofEngineer-in- charge to fullfil the functional requirement. (The cement concreteand excavationwork shall be paid scparately). 13 PUSH UP BARS- ProvidingandfixingofPushUpBars of size not less than 1220mm (Length)x550 mm(Width)1700mm.(Height),Toenhancethestrength and stamina of the body. The main structure frame shallbe made from G.I. pipeminimumof80NB C classwelde dwithM.S.roundbase plate at least 0250 mm &10mm thick. The handle frame minimum of25 NB shall bemade from C Class G.I. pipe . Closing Caps shallbe made up ofhigh quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts &bolts shall be used for assembly. The powder coating shallbe done withPure Polyesterpowders of Ackzonoble/Berger/NerolacPaints with 60to70micronthickness,completeinallrespectincludingfixingthe M.S.holdfastincementconcretetoholdthe wholestructure,underthe directions of Engineer-in-charge to fullfil the functionalrequirement. (The cement concrete and excavation work shall be paid separately) . 14 Items for BAL VATIKA 15 FOR SEATER MRG-Providing and fixing of For Seater MRG swingof size 4/5 Feet (Diameter), 3 Feet (Heig ht) fabricated with a Center Pipe/ Frame of50NB shallbe made from CClas sG.I.pipe and FRP material. The bottom shall be welded with support of M.S. roundplate of ø250 mm &10mm thickness. Thebottom frame of 32NB shall be made from Cclass G.l. pipe. The handle frame of 25NB shall be made from Cclass G.l. pipe. The foundation shouldbe used for fixing is a structure and shall be made from center pipe of G.I. of 50 NBC class welded with M.S. round plate of ø250 mm & 10mm thick. Main pipe shall be supportedwith 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approvalofEngineer-in- charge regardingmaterial, shape of equipment, colour (of metal,seat and pedal) and fixing of equipment etc . (Thecement concrete and excavation work shall be paid separately) . 16 CIRCULAR SWIN FOUR SEATER-Providing and fixing ofCLRCULAR SWING FOUR SEATER of size 6.0 X 5.25 X 5.0 Feetfabricated with a Center Pipe/ Frame of65NB shall be made from CClass G.I. Pipe and FRP material. The bottom shall be welded with support of M.S. round plate of ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from Cclass G.l. pipe. The handle frame of 25NB shall be made from C class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 65 NBC class with M.S. round plate of ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensilesteel with galvanizednuts andbolts shallbe used for assembly.The powder coating shall be done with Pure Polyester powder from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approvalofEngineer-in- charge regardingmaterial, shape of equipment, colour (of metal,seat and pedal) and fixing of equipment etc . (Thecement concrete and excavation work shall be paid separately) . 17 FOUR SEATER SEE SAW-Providing and fixing of FOUR SEATER SEE SAWof size 5.5 X 6.25 X 2.5 Feetfabricated with a Center Pipe/ Frame of50NB shallbe made from C Class G.l. material. The bottom shall be welded with support of M.S. round plate of ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from Cclass G.I. pipe. The handle frame of 25NB shall be made from Cclass G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50NB C class welded with M.S. round plate ofø250 mm & 10mm thick. Main pipe shallbesupportedwith 25 mm X 25mm M.S. angles of 3 mm thickness and20mm x 40mm CRC square pipes of 3mm thickness. ClosingCaps shallbe made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). 18 HORSE/ DUCK / RABET SPRING RIDER -Providing and fixing ofHORSE SPRINGRIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of40NB shall be made from C Class G.I. material andFRP Material. The bottom shall be welded with support of M.S. round plate of ø250 mm &10mm thickness.Thebottom frame of 32NB shall be made from C class G.l. pipe. Thehandle frame of 25NB shallbe made from C class G.I. pipe. The foundationshouldbe used for fixing is a structure and shall be made from center pipe of G.l. of 40 NB C class welded with M.S. roundplate of ø250 mm & 10mm thick . Main pipe shallbe supported with 25 mm X 25 mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforcedPlast ic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc . (The cement concrete and excavation work shall be paid separately).

INR 500 /-

INR 23520.0 /-

INR 11.76 Lakhs /-

Name of Work: iz/kkuea=h d`f"k flapkbZ ;kstuk&2 vUrxZr vkWiu ,;j fte ¼2½ ,oa cky okfVdk ¼4½ lIykbZ ,oa fQDlhax dk;Z ¼bZih,½ lEiw.kZ ifj;kstuk {ks= CYkkWd& fpryokukA

Sl. No.	Item Description
1	Open Air Gym Item-
2	Surfing  Board-ProvidingandfixingofSurfingBoardofsizenotless than1000mm (Length) x 600mm(Width)x1400mm (Height),to buildup the muscle groups of the waist, enhance the body coordinationand flexibility. The main structure frame shall be made from G.I. pipe minimum of80NB"C" classweldedwithM.S.roundbaseplateatleast ø250mm&10mmthick.Thefootrestsshallbemadefromhighquality fiberreinforcedplastic material.High tensilesteel with galvanized nut boltsshallbe usedforassembly. Thepowdercoatingshallbedone with Pure Polyesterpowder of Ackzonoble /Berger/ Nerolacwithminimum60 to70micronthickness,completeinallrespectincludingfixingtheM.S. holdfast in cement concrete to hold the whole structure, under the directionsofEngineer-in-charge tofullfilthefunctionalrequirement.The indicative Design/Photo isasper enclosedPhoto No. 1.(Thecement concrete and excavationwork shall be paid separately).
3	Crosstrainer- Providing andfixingofCrosstrainerofsizenotlessthan1320mm (Length)x600mm(Widux 1750mm.(Height),to enhancethemobilityof upperandlowerlimbsandimprovetheflexibilityof joints.Themain structureframeshallbe madefromG.I.pipeminimumof80N"C" class weldedwithM.S.roundbaseplateatleastø250mm&10mmthick.The HandFrameshallbemadeupor atleast25NB"C" ClassG.l.Pipe.The footrestsshallbemadefremAluminumcastingmaterialofsizenotless than130mmX310mm X 5mmthicknessamountedonM.S.PlateofSize 130mmx310mmx3mmthick.Hightensilesteelwithgalvaniz[3:25pm, 25/02/2022] Prasoon:nutsand boltsshallbe used forassembly. [3:32pm, 25/02/2022] Prasoon: used for assembly. Thepowdercoating shallbe donewith Pure PolyesterpowdersofAckzonoble/Berger/NerolacPaints with 60to70 Micronthickness,completein allrcspectincludingfixing the M.S. holdfastincementconcretethe directionsof Engineer-in-charge to fullfiI. (The cemmt concrete and excavation work shall be paid separately).
4	THAI-CIHSPINNER (2 WHEEL)- ProvidingandfixingofThi-Chispinner(2Wheel)ofsizenotlessthan 700mm(Length)x1000mm(Width)x1280mm(Height),toincrease mobilityof shoulder -elbow andhip-knee. Themain structure frame shall be made fromG.I.pipe minimumof 80NB "C"classweldedwithM.S. roundbaseplate atleastø250mm&10mmthick.HightensileS.S.nut bolts shallbeusedfor assembly. Thepowder coatingshallbe done with Pure PolyesterpowdersofAckzonoble/Berger/NerolacPaints with 60to70 Micronthickness,completein allrcspectincludingfixing the M.S. holdfastincementconcreteto hold the whole structure under the directionsof Engineer-in-charge to fullfiI the functional requierment. (The cement concrete and excavation work shall be paid separately).
5	SEATED PULLER-ProvidingandfixingofSeatedPuller of size not less than 1900mm(Length) x 740mm (Width) x 1920mm . (Height), to enhance the Strength of upper limbs and the muscle in chest and back and promote cardiopulmonary function. The main structure frame shall be made from G.I. pipeminimumof80NB"C"classweldedwithMS.round base plate atleast250mm & 10mmthick. The handle frame shallbeminimumof 32NB"C" ClassG.l. Pipe. The seat frame minimum of 32NB "C" class G.l.Pipe. Closing Cape shall be made up of high quality Fiber rainforced Plastic material. Hightensile steel with galvanizednut bolts shallbeusedfor assembly. Thepowder coatingshallbe done with Pure PolyesterpowdersofAckzonoble/Berger/NerolacPaints with 60to70 Micronthickness,completein allrcspectincludingfixing the M.S. holdfastincementconcreteto hold the whole structure under the directionsof Engineer-in-charge to fullfiI the functional requierment. (The cement concrete and excavation work shall be paid separately).
6	LEG PRESS- Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhancethe strengthofwaist. The mainstructureframe shallbemade from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast ø250 mm &10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shallbe made from casted Aluminummaterial, having sizes minimum of 130mm X 310mmX 5mm thick. ClosingCapsshallbemadeupofhighqualityFiberreinforced Plastic material. High tensile steel with galvanized nut bolts shall be used forassembly.ThepowdercoatingshallbedonewithPurePolyester powder of Ackzonoble/Berger/ Nerolac with 60 to 70 micron thickness, completeinallrespectincludingfixingtheM.S.holdfastincement concrete to hold the whole structure, under the directions of Engineer-in­ charge to fullfil the functional requirement.(The cement concrete and excavationwork shall be paid separately).
7	SIT UP BOARD DOUBLE- Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The mainstructure frame shallbe madefromG.I.pipe minimumof 80NB "C" class weldedwithM.S. round baseplate atleast ø250mm&10mmthick.Theremainingframeofthesitupboard minimum of 32mm NB shall be made from "C" class GI pipe. The powder coating shallbedonewithPurePolyesterpowderAckzonoble/Berger/NerolacPaintswith60to 70micronthickness,completein allrespect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid separately).
8	CHEST PRESS- Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbsandthe musclesin chest& backandpromotecardio-pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. roundbase plate atleast 250 mm & 10mmthick. Thehandle frame shallbemadeupfromatleast32NB"C" class G.I. pipe.Theseats andBackrests tobe fittedontheouterframes shallbemadeupof M.S.Sheetofsizenotlessthan330mmX 300 mmX2mmthickness . Closing Caps shallbe made up of high quality Fiber reinforcedPlastic material. High tensile steel with galvanizednuts & bolts shallbeusedforassembly.Thepowdercoating shallbe done withPure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, Completeinallrespectindudiugfixing theM.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid separately).
9	PommelHorse- ProvidingandfixingofPommelHorseofsizenotlessthan2150mm (Length)x 800mm (Width) x 800mm. (Height), to enhance theflexibility oflowerlimbs ,waistandabdomen.Themainstructureframeshallbe made from G.I. pipe minimum of 80NB "C" class welded withM.S.round base plate atleast 0250 mm & 10mmthick. Thehandle frame be minimum of32NB shallbemadefrom "C" Class G.I.pipe.ClosingCapsshallbe madeupofhighqualityFiberreinforcedPlasticmaterial.Hightensile steelwithgalvanizednutsandboltsshallbeusedforassembly.The powdercoatingshallbedonewith PurePolyesterpowderAckzonoble/ Berger/NerolacPaintswith60to 70micronthickness,completeinall respect including fixing the M.S. holdfastIn cement concrete toholdthe whole structure,underthedirectionsofEngineer-incharge to fullfilthe functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid seseparately)
10	DOUBLE STANDING TWISTER- ProvidingandfixingofDoubleTwisterStandingofsizenotlessthan 1500mm(Length)x600mm(Width)x1300mm.(Height),toenhance flexibility of waist. The main structure frame shallbe made from G. I. pipe minimumof80NB"C"classweldedwithM.S.roundbaseplateatleast 0250 mm &10mm thick. Thehandleframe isminimumof 25NB shall be madefrom"C"class G.I.pipe.TheTwisterplatetobefittedonthe bottomframeshallbemadeupofM.S.RoundPlateofminimumsize 0300mm and10mmthick. ClosingCaps shallbe made up of high quality FiberreinforcedPlasticmaterial.Hightensile steelwithgalvanizednuts andbolts shallbeusedforassembly.Thepowder coatingshallbe done withPurePolyesterpowdersfromAckzonoble/Berger/NerolacPaints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfastincementconcretetoholdthe whole structure,underthe directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid seseparately).
11	Seating & Standing Twister- Providing and fixing of Seating & Standing Twister of sizenotlessthan 1700mm(Length)x540mm(Width)x1250mm.(Height),toenhance flexibilityofwaist.suitableforpeopleof differentagesexceptchildren . The main structure frame shallbe madefrom G.I. pipe minimum of 80NB "C" classweldedwithM.S.roundbaseplate atleast0250mm&10mm thick . The bottom frame of the Seating & Standing twis ter be atleast of 32 NB, 50 NB, and 25 NB shall be made from "C" classG.I. pipe . The handle frame of Seating &Standingtwis terofminimum25NB &Footresting frame of seating side shallbemade from "C" class G.I. pipe minimu m o f 25mmNB.The Twisterplatetobe fittedonthebottomframe shallbe madeupofM.S.RoundPlateofminimumsize300mmdiameterand 10mmthickness.ClosingCapsshallbemadeup ofhighqualityFiber reinforced Plastic material. High tensile steel with galvanizednuts &bolts shallbeusedforassembly.Thepowdercoating shallbedonebyPure Polyester powderofAckzonoble/Berger/NerolacPaintwith60to70 micron thickness, complete in all respect including fixing the M.S. holdfastincementconcretetoholdthe whole structure,underthe directions of Engineer-in-charge to fullfil the functionalrequirement.(Thecementconcreteandexcavationworkshallbepaid seseparately).
12	CHEST CUM SHOULDER PRESS- ProvidingandfixingofChestPressCumSeatedPullerofsizenotless than 2000mm(Length)x710mm (Width)x2200 mm(Height), toenhance thestre ngth ofupperlimbsandthemusclesinchestandshoulder.The main structureframe shallbemadefrom G.I. pipe minimumof80NB "C" class weldedwithM.S.roundbase plate atleast 0250mm & 10mm thick . Theseats andBackrests tobe fitted on the outer frames shallbe madeup minimumofM.S.Sheetofsize330 mmX300 mmX2mmthickness. ClosingCapsshallbemadeupofhighqualityFiberreinforcedPlastic material.Hightensilesteelwith galvanizednuts &bolts shallbeusedfor assembly. Thepowder coating shall be done with Pure Polyesterpowders from Ackzonoble/Berger/Nerolac Paints with 60to 70 micronthickness, complete in allrespectincludingfixingtheM.S. holdfast Incement concrete tohold the whole structure,under the directions ofEngineer-in- charge to fullfil the functional requirement. (The cement concreteand excavationwork shall be paid scparately).
13	PUSH UP BARS- ProvidingandfixingofPushUpBars of size not less than 1220mm (Length)x550 mm(Width)1700mm.(Height),Toenhancethestrength and stamina of the body. The main structure frame shallbe made from G.I. pipeminimumof80NB "C" classwelde dwithM.S.roundbase plate at least 0250 mm &10mm thick. The handle frame minimum of25 NB shall bemade from "C" Class G.I. pipe . Closing Caps shallbe made up ofhigh quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts &bolts shall be used for assembly. The powder coating shallbe done withPure Polyesterpowders of Ackzonoble/Berger/NerolacPaints with 60to70micronthickness,completeinallrespectincludingfixingthe M.S.holdfastincementconcretetoholdthe wholestructure,underthe directions of Engineer-in-charge to fullfil the functionalrequirement. (The cement concrete and excavation work shall be paid separately) .
14	Items for BAL VATIKA
15	FOR SEATER MRG- Providing and fixing of For Seater MRG swingof size 4/5 Feet (Diameter), 3 Feet (Heig ht) fabricated with a Center Pipe/ Frame of50NB shallbe made from "C"Clas sG.I.pipe and FRP material. The bottom shall be welded with support of M.S. roundplate of ø250 mm &10mm thickness. Thebottom frame of 32NB shall be made from "C"class G.l. pipe. The handle frame of 25NB shall be made from "C"class G.l. pipe. The foundation shouldbe used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB"C" class welded with M.S. round plate of ø250 mm & 10mm thick. Main pipe shall be supportedwith 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approvalofEngineer-in- charge regardingmaterial, shape of equipment, colour (of metal,seat and pedal) and fixing of equipment etc . (Thecement concrete and excavation work shall be paid separately) .
16	CIRCULAR SWIN FOUR SEATER- Providing and fixing ofCLRCULAR SWING FOUR SEATER of size 6.0 X 5.25 X 5.0 Feetfabricated with a Center Pipe/ Frame of65NB shall be made from "C"Class G.I. Pipe and FRP material. The bottom shall be welded with support of M.S. round plate of ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C"class G.l. pipe. The handle frame of 25NB shall be made from "C" class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 65 NB"C" class with M.S. round plate of ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensilesteel with galvanizednuts andbolts shallbe used for assembly.The powder coating shall be done with Pure Polyester powder from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approvalofEngineer-in- charge regardingmaterial, shape of equipment, colour (of metal,seat and pedal) and fixing of equipment etc . (Thecement concrete and excavation work shall be paid separately) .
17	FOUR SEATER SEE SAW- Providing and fixing of FOUR SEATER SEE SAWof size 5.5 X 6.25 X 2.5 Feetfabricated with a Center Pipe/ Frame of50NB shallbe made from "C" Class G.l. material. The bottom shall be welded with support of M.S. round plate of ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C"class G.I. pipe. The handle frame of 25NB shall be made from "C"class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50NB "C" class welded with M.S. round plate ofø250 mm & 10mm thick. Main pipe shallbesupportedwith 25 mm X 25mm M.S. angles of 3 mm thickness and20mm x 40mm CRC square pipes of 3mm thickness. ClosingCaps shallbe made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).
18	HORSE/ DUCK / RABET SPRING  RIDER - Providing and fixing ofHORSE SPRINGRIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of40NB shall be made from "C" Class G.I. material andFRP Material. The bottom shall be welded with support of M.S. round plate of ø250 mm &10mm thickness.Thebottom frame of 32NB shall be made from "C" class G.l. pipe. Thehandle frame of 25NB shallbe made from "C" class G.I. pipe. The foundationshouldbe used for fixing is a structure and shall be made from center pipe of G.l. of 40 NB" C" class welded with M.S. roundplate of ø250 mm & 10mm thick . Main pipe shallbe supported with 25 mm X 25 mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforcedPlast ic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc . (The cement concrete and excavation work shall be paid separately).
19	??? ??? 1.5 ????? ?? ?????? ?? ????? ???? , ?? ?? ????? , ???? ?????, ??? ?? ??????? , ???? ?????? ?? ???? ???????, ??? ???? ?? ??? ???? ???????? ?? ???: ?????? ?? ???? ??? ??? ??? ????? ?? 50 ???? ?? ???? ?? ????????? ???? I BSR GKN-2021- Item-2A
20	?????? ??????? 1 ?????? : 2 ???? : 4 ?????? ???????? ?????? ??? 12 ???? ????? ??? ?? ???????? ?? ??? ?????,????? ??? ???? ??? ???? ? BSR GKN-2021- Item-16