|
| 1 | 1.Routine maintenance and Operation of sewage and dewatering pump sets and DG set as per the inventory , terms and condition attached at the following DDA site Sewage pumping station near CNG Station, Shopping mall, West of JNU,Vasant Kunj Ph II. -1 Job |
| 2 | 2. Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. a) 5/6 amps switch |
| 3 | 2.01 b) 15/16 A switch |
| 4 | 2.02 c) 3 pin 5/6 A socket outlet |
| 5 | 2.03 d) 6 pin 15/16 A socket outlet |
| 6 | 3. Dismantling old burnt spare, acceessories & wiring etc from Main control panel of three nosML-3 FASD starters and two nos MK-1 DOL starters repairing the same after cleaning by CTC etc & Supplying/ replacementfollowings including connections withlugs/thimbles, testing & recommissioningand cleaning, painting of control panel with Red oxide & two or more coat of supper enamelled synthetic paint etc. complete as required. |
| 7 | 3.01 a)Spare Three Pole Power CotactorML-3of L&T make |
| 8 | 3.02 b ) Over Load Relay direct mounting on ML-3 Contactor,415/440 Volts , Rating28-42 Amp |
| 9 | 3.03c) Timer switch of L&T Make |
| 10 | 3.04d) SPPR |
| 11 | 3.05e) Push Button Switch for ON & OFF (Green & Red colour), standered eluminated actuator with LED |
| 12 | 3.06 f) 0-100 Amp rating 96 mmx 96 mm size Ammeter |
| 13 | 3.07 g) 0-500 Volts rating 96 mmx 96 mm size Voltmeter |
| 14 | 3.08 h) Slector Switch for Ammeter (for three phase current reading ) |
| 15 | 3.09i) Dismentaling all burnt switch gears etc., removing carbon, cleaning & wiring of ML-3 FASD Starterwith sutable capacityPVC Insulated, Copper Conductor Power & Control Cable. |
| 16 | 3.10Spare Three Pole Power CotactorMK-Iof L&T make |
| 17 | 3.11Spare Thermal over load relay 4 - 6.5 Amp rating for Mk-I Contactor of L&T make |
| 18 | 3.12 LED Indicating Light (RYB Set of 3) |
| 19 | 3.13 Cleaning, Rubbing, Finishingand painting of control panel board, base chanel etc with anti-corrosive paint,and two or more coat by spray painting of super enameled synthetic paint (i/c both side of door) etc. as required |
| 20 | 4.Repair /Servicing including replacement ball bearings, bearing bush ,neck ringetcof3 Phase 40 HP Pumpand greasing of40 HPMotor ofKirloskar make i/c dismaintling, lifting ,cartage both sides lowering, reassembelling, connections ,testing & commissioning etc.completete as required. |
| 21 | 5.Repair / Servicing including replacement ballbearings/ bearing bushetcof 3 H.P. 3 phase dewatering submersible type sump. Pump dismaintling ,cartage reassembelling greasing completete as required. |
| 22 | 6. Rewinding of 3HP, 3 Phase ,1440 RPM, 5O HZmotor of submersible sump dewatering pump set i/c dismentaling, reassembling ,testing & commissioning etc as required |
| 23 | 7.Dismentaling, supplying & replacing 150 mm dia 0- 14kgf/ sqcm range pressure gauge testing commissioning etc as required. |
| 24 | 8. Dismantling ,dressing /refixing cable tray, cable of all pump sets ,refixing of existing GI Earth strips connections etc as required |
| 25 | 9. Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. |
| 26 | 10.Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holesin cubicle panel, making connections, etc. as required. a)125 A, 16KA,TPMCCB |
| 27 | 11. Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) Single pole |
| 28 | 11.01b) Double pole |
| 29 | 12.Supply & fixing LED Tube light fitting with lamp in the including connections, testing and commissioning etc as required.i.)LED 20 Watt 4 Feet |
| 30 | 13.Supplying and laying of antiskid aberrations proof type synthetic rubber mat as per IS : 15652/2006 black/blue colour (ISI marked) of size 2000mmX 1000mmX 2mm thicksuitable for 3.3 KV grade A/C supply,fixing with synthetic Adhesive i/c making surface,cleaning etc as required. |
| 31 | 14. Providing & fixingPowderfire extinguisher (Stored Pressure Type) capacity 6 kg duly ISI mark conferming to IS-15683:2006, U:L listed map 90% powder, ABC powder complete with squeeze grip release valve, discharge pipe locking arrangement, pressure guage, operation mannual and bracket. etc. complete as required. |
