|
| 1 | CODE NO. 31.250.1HSupplying of electrically operated wet type submersible motor and pumpset(Texmo/KSB/Taro/Kirloskar make), AC 3phase, 415 volts, 50 Hz, 2900-3000 RPM.The pump shall have brass impeller, highgrade steel shaft with sufficient stageshaving outlet size of 2\"/2.5\"/3\" dia. Tosuit the borewell (150 / 200mm dia.),complete. The rate includes, all taxes, freight, etc., FOR at site in Puducherry.The pumpset shall be guaranteed for aperiod of one year from the date of commissioning.(15 HP Submersible motor andpumpset |
| 2 | CODE No. 31.252.1BSupplying and fixing of 100/125 Amps capacity cubical wall mounting panel boardof size1300mm x 750mm x 225mm made of 16gauge CR M.S. sheet painted with two coatsof enamel paint, over zinc chromate primer,suitable arrangements for fixing switchdisconnector, fuse switches, Voltmeter, Voltmeter Selector switch, Ammeter, Ammeter Selector switch, 3 Nos. ofIndicator, 3 Nos. of Toggle switch, 3 Nos.of side lock fuses, 3 Nos. of C.T. Coiletc. The panel board shall include power mat, copper busbar, 3mm thick hylan sheetin cluding internal wiring with provisionfor interlocking arrangements, copper flatfor earthing arrangement linked with shutters and doors. The board shall be mounted on an angle frame of 30mm x 30mm x6mm with legs. Supplying and fixing of 2Nos. of TPN (CG/L&T/Siemens/Standard make)100/125 Amps, 415 V disconnectorswitch/cubical switch/fuse switch with fuselinks complete.(1 No. for E.D. supply and 1No. for Diesel Generator supply). Supplyingand fixing of 2 Nos of 100 Amps, 415 Vdisconnector fuse switch / TPNCubicalswitch(CG/L&T/ Siemens/standard make) with fuselinks capacitor motor control complete. (1number of power capacitor and 1 number ofmotor control), complete - 15HP to 30HP. |
| 3 | CODE NO. 31.255.1CSupplying and fixing of 7.5KVAR power capacitor (CG/L&T/Siemens make) for 15 HPmotor complete. |
| 4 | CODE NO. 31.265.1Providing and fixing 50 mm dia GI pipe (Class B) conforming to IS 1239 (Part1:1990) with GI fittings including strenching, refilling etc., complete for UGcable duct. |
| 5 | CODE NO. 31.256.1BSupplying and fixing of fully automatic air break star-delta starter range for10A to 23A F.A.S.D. (Bharat CulterHammer/L&T/Siemens make) with suitable M.S.angle frame etc., complete.- 15HP to 17.5HP pumpsets |
| 6 | CODE NO. 31.268.1BSupplying, fixing and lowering into the borewell high tensile threaded PVC column pipes which are to be connected to the submersible pump, including labour charges, jointing materialsetc.,complete.-100 mm dia |
| 7 | CODE NO. 31.272.1Supply and fixing of 80/100mm dia. M.S. erection clamps of size 80mmx12mm withbolts, nuts, washer etc., complete |
| 8 | CODE NO. 31.258.1BSupplying and fixing of 1x3x10 sqmm (single run) PVC insulated coppersubmersible flat flexible cable of Finolexmake complete.-above 20HP pumpset |
| 9 | CODE NO. 31.259.1ASupplying of 3.5/ 4x25 sqmm underground able (Paragon/ suncab/Empire)complete.-upto 25HP pumpset. |
| 10 | CODE NO. 31.260.1ALaying of UG cable and providing termination of cable joint with suitablecable gland,cable socket etc., complete -3.5/4 x 25 sqmm cable. |
| 11 | CODE NO.18.10.5Providing and fixing GI pipes complete with GI fittings and clamps including cuttingand making good the walls etc.Internal work - exposed on wall 40 mm dia nominal bore. |
| 12 | CODE NO.31.266.1Supplying and fixing of pole clamp to hold the G.I. Pipe with electric post. |
| 13 | CODE NO.31.261.1Supplying and fixing of meter board of size 600mmx900mmx150mm on suitable angle frame with suitable water proof plywood12mm thick for receiving ED supply. The board frame shall be painted and covered on all sides by 16 gauge M.S. sheet and fixed with 3 Nos. of 100 Amps fuse carrier(Havells/Standard/Anchor make) with screws etc., complete. |
| 14 | CODE NO.31.262.1Supplying and fixing of teak wood aerial board with 100 Amps HRC fuse base and fuse link and suitable post clamp to hold theG.I. Pipe with electric post including bolts and nuts etc., complete. |
| 15 | CODE NO.31.263.1Making earth pit of G.I. pipe for earthing in earth pit with 40mm dia. G.I. pipemedium class of length 3.05m perforatedwith 46 Nos. of 12mm dia. holes, pipelowered in bore holes of 150mm dia. Andfilled in with charcoal and salt inalternative layer of 300mm, the top of G.I.pipe shall be clamped. Earth pit shall beprovided with 60cm dia precast ring with60cm depth alround,covered with R.C.C.precast slab etc. as per I.E. standards. |
| 16 | CODE NO.31.267.1ASupplying and fixing of copper flat (25 x 3mm) for earthing arrangements including bolts and nuts etc. |
| 17 | CODE NO.31.269.1DSupplying and fixing of C.I. adopter which is to be connected to submersible pump delivery pipe.-100 mm dia |
| 18 | CODE NO.31.271.1Supplying and laying of 40mm dia. PVC pipe (Class 3 - PN 0.6 Mpa) conforming to IS4985 : 2000 for inserting submersible cable from borewell to starter. |
| 19 | CODE NO.31.273.1DSupplying, fixing and lowering into the borewell the GI pipes of medium class (TATA, TNT, Nezone, Apollo, Zenith) which areto be connected to the submersible pump, including labour charges, jointing materialsetc.,complete.-100 mm dia |
| 20 | CODE NO.31.274.1DProviding and fixing MS square threaded coupling (male and female thread) includingnecessary welding with 100mm GI pipe.-100mm dia. |
| 21 | CODE NO.31.48.8BProviding and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 &IS 1363, with bolts, nuts, rubberinsertion etc.,complete (the tail pieces ifrequired will be paid separately) - 100 mmdia. |
| 22 | CODE NO.31.48.1BProviding and fixing C.I. sluice valve (PN 1) (with cap) conforming to IS 14846 andISI marked, with bolts, nuts, rubberinsertion etc.,complete (the tail pieces ifrequired will be paid separately) - 100 mmdia. |
| 23 | CODE NO.31.130.1AProviding and laying in position flanged C.I. specials such as tees, bends, collors,tapers, caps etc.conforming to ISspecification 1538 and ISI marked - 80 to200mm dia. |
| 24 | CODE NO.18.30.1Providing and laying in position flanged C.I. specials such as tees, bends, collors,tapers, caps etc.conforming to ISspecification 1538 and ISI marked - 80 to200mm dia. |
| 25 | CODE NO.31.137.1IProviding and fixing in position G.I. 3equal Tee (UNIQUE/R Brand/HB Brand/UIBrand)conforming to IS 1239 part II and ISImarked,including labour charges forjointing,jointing materials etc,complete-100mm dia. |
| 26 | CODE NO.31.147.1IProviding and fixing in position G.I. cap (UNIQUE/R Brand/HB Brand/UI Brand)conforming to IS 1239 part II and ISImarked,including labour charges forjointing,jointing materials etc,complete -100 mm dia. |
| 27 | CODE NO.31.141.1HProviding and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand)conforming to IS 1239 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete -100 mm dia. |
| 28 | CODE NO.31.279.1AErection, testing and commissioning of motor and pumpset complete.The rate includes obtaining electricity service connection from Electricity Department also. |
