Strengthening, Widening & Black Topping To The Approach Road 1St Cross, I Main, Ii Main, 5Th, 9Th, 11Th, 15Th, 19Th And 25Th Cross Roads At Mettupalayam Industrial Estate, Puducherry Under Msme Scheme., Mettupalayam-Puducherry
TDR : 32392294
Tender Notice
BOQ
Expired
Mettupalayam
Puducherry
Strengthening, Widening & Black Topping To The Approach Road 1St Cross, I Main, Ii Main, 5Th, 9Th, 11Th, 15Th, 19Th And 25Th Cross Roads At Mettupalayam Industrial Estate, Puducherry Under Msme Scheme.
Name of Work: Strengthening, Widening & Black topping to the approach road 1st Cross,I main, II main, 5th, 9th, 11th, 15th, 19th and 25th Cross roads at Mettupalayam Industrial Estate, Puducherry under MSME Scheme.
Sl. No.
Item Description
1
Code No.3.1:Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres.
2
Code No. 4.1A.2: Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision - by plant mix method - for grading II material.
3
Code No. 4.12A:Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density - Using vibratory roller. (As per MoRTH specification, 4th Revision
4
Code No. 3.15: Scarifying the existing bituminous surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 metres - by mechanical means.
5
Code No. 5.1 Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. (As per MoRTH specification, 4th Revision)
6
Code No. 5.2: Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg. per sqm. on the prepared bituminous / granular surface cleaned with mechanical broom. (As per MoRTH specification, 4th Revision)
7
Code No. 5.3A: Providing and laying bituminous macadam with hot mix plant of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading premixed with bituminous binder, transported to site,laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 507.7 of MoRTH specification, 4th Revision, to achieve the desired compaction.- Using grade I metal and bitumen 60/70 grade.
8
Code No. 5.8A.1: Providing and laying bituminous concrete with HMP of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 509 of MoRTH specification, 4th Revision, complete in all respects - Using grade-I material Using bitumen 60/70.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
