Strengthening, Widening And Black Topping To The Approach Road, Ist , Ii Main Roads, 1St, Iind, Iiird, Ivth, Vth, Vith And Viith Cross Roads At Sedarapet Industrial Estate, Puducherry., Puducherry-Tamil Nadu
TDR : 32392289
Tender Notice
BOQ
Expired
Puducherry
Tamil Nadu
Strengthening, Widening And Black Topping To The Approach Road, Ist , Ii Main Roads, 1St, Iind, Iiird, Ivth, Vth, Vith And Viith Cross Roads At Sedarapet Industrial Estate, Puducherry.
Name of Work:Strengthening, Widening and Black topping to the approach road, Ist , II main roads, 1st, IInd, IIIrd, IVth, Vth, VIth and VIIth cross roads at Sedarapet Industrial Estate, Puducherry.
Sl. No.
Item Description
1
Code No 3.1 Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres.
2
Code No.4.2.2 Construction of granular sub-base by providing coarse gradedmeterial,spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision - For grading II material.
3
Code No.4.12B.1 Providing,laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layer by manual means in sub-base / base course on well prepared surface and compacting with smooth 3 wheeled steel roller to achieve the desired density.
4
Code No.5.2 Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. (As per MoRTH specification, 4th Revision)
5
Code No5.3B Providing and laying bituminous macadam with hot mix plant of capacity not lessthan 40 -60 TPH using crushed aggregates ofspecified grading premixed with bituminousbinder, transported to site, laid over apreviously prepared surface with paverfinisher to the required grade, level andalignment and rolled as per clauses 501.6and 507.7 of MoRTH specification, 4thRevision, to achieve the desiredcompaction. - using grade II metal andbitumen 60/70 grade.
6
Code No 5.8B.1 Providing and laying bituminous concrete with HMP of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 509 of MoRTH specification, 4th Revision, complete in all respects - Using grade-II material.-Bitumen 60/70
7
Code No.6.1.2 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)
8
Code No.13.1.2 12mm cement plaster of mix -1:6 ( 1 cement : 6 fine sand)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
