Periodical Services To Certain Bldgs Of Otm Accn At Nco Academy Of Dhana Mil Station.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
20 Jun 2022
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dhana → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Services To Certain Bldgs Of Otm Accn At Nco Academy Of Dhana Mil Station.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Preparation of old decorated surfaces of walls including, corners, pillars etc by washing, scraping, rubbing & brooming down and applying one coat of white wash including filling of minor holes/cracks with putty & removing nails etc complete all as specified & directed. |
| 2 | All as per item No. (1) here-in-before but one coat of white wash on ceiling surface and-ditto- |
| 3 | All as per item No. (1) here-in-before but one coat of oil bound distemper and-ditto- |
| 4 | All as per item No. (1) here-in-before but two coat of oil bound distemperand-ditto- |
| 5 | All as per item No. (1) here-in-before but two coat of snowcem (cement based paint)on external wall surfaces, and-ditto- |
| 6 | Taking down cement plaster on brick or concrete surfaces etc including racking out joints, hacking for key and scrubbing down with water etc, complete all as specified and directed. |
| 7 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement),mixed with water proofing compound @ 3%, complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately) |
| 8 | Supply only integral water proofing compound complete all as specified and directed. |
| 9 | Material and labour for rendering 15 mm thick in CM (1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement),complete all as specified and directed. |
| 10 | Material and labour for rendering 5mm thick in CM (1:3) on concrete surfaces as in ceiling, finished even & smooth (without using extra cement), including preparing new plastered surface of ceiling and applying two coats of white wash etc., complete all as specified and directed. |
| 11 | Material & Labour for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed. |
| 12 | Material & Labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 13 | Material and labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | All as per item No. 13.00 above but one coat of synthetic enamel paint over old steel surfaces and-ditto- |
| 15 | Material and labour for applying texture paints on smooth finished wall surfaces, complete all as specified and directed.Make :- Asian / Burger / DuluxNote :- Each stages will be got approved from Engineer-in-Charge before application. |
| 16 | Material and labour for wall paper on smooth finished wall surface in full or part wall with designed fancy wooden bidding, complete all as specified and directed. |
| 17 | Material and labour for designed fancy wooden bidding on wall paper or smooth finished wall surface in full or part wall, complete all as specified and directed. |
| 18 | Material and labour for a coat of Birla putty 1 mm thick as per manufacturer\"s instruction on wall surfaces including complete removal of existing treatment & preparation of old decorated surfaces, complete all as specified and directed by Engr-in-Charge. |
| 19 | Material and labour for complete removal of existing treatment and applying two coats of weather proof exterior paint over a coat of primer and 1mm thick waterproof exterior wall putty on wall for smooth finish including preparation of surfaces etc, complete all as specified and directed. Note :- Each stages will be got approved from Engineer-in-Charge before application |
| 20 | Material and labour for complete removal of existing treatmentand applying two coats of weather proof exterior paint over a coat of primer on wall for smooth finish including preparation of surfaces etc complete all as specified and directed. Note :- Each stages will be got approved from Engineer-in-Charge before application |
| 21 | Material and labour for obliterating old writing of any description and any size using synthetic enamel paint (normally black tint) to match existing work etc, complete all as specified and directed. Note :- Each alphabets, Numbers and symbols tobe measured |
| 22 | Material and labour for preparation of oldpainted footpath surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 23 | Material and labour for writingletters, alphabet’s, numbers or figures (block, Roman, Italic or Indian) not exc 30 cm heightas per existing style and in proper shape using synthetic enamel paint of any tint (normally white tint), etc complete all as specified and directed. |
| 24 | Supply & Fix in repair PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, single socketed in any length with rubber ring joints with and including all necessary fittings such as bend, tee, junctions, traps etc fixed to walls, complete all as specified and directed. |
| 25 | Supply & Fix in repair PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, single socketed in any length with rubber ring joints fixed to walls with and including all necessary fittings such as bend, tee, junctions, traps etc, complete all as specified and directed. |
| 26 | Supply & Fix in repair PVC (SWR) vent cowl 110mm dia, complete all as specified and directed. |
| 27 | Supply & Fix in repair PVC (SWR) vent cowl 75 mm dia, complete all as specified and directed. |
| 28 | Supply & Fix in repair PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 29 | Supply & Fix in repair PVC (SWR) 75 mm dia in junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 30 | Supply & Fix in repairs PVC (SWR) bend of any radius 110mm bore, complete all as specified and directed. |
| 31 | Supply & Fix in repairs PVC (SWR) bend of any radius 75 mm bore, complete all as specified and directed. |
| 32 | Material and labour for writing full stops, commas, hyphen, dashes, brackets etc using synthetic enamel paint of any tint (normally white tint), etc complete all as specified and directed. |
| 33 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 1800.00 /- ] |
AI Tender Summary
Tender Timeline
Jun 13, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 20, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender