Electrical Miscellaneous Work For Bus - Bar Chamber Etc Ewss, Banaras Hindu University, Varanasi - Providing & Fixing the 440V AC, 3 phase & neutral Bus-bar chamber etc.as detailed in scope of work & specification of NIT(Sr. No. 1.0 of page No. 12). , varanasi-Uttar Pradesh

Electrical Miscellaneous Work For Bus - Bar Chamber Etc Ewss, Banaras Hindu University, Varanasi - Providing & Fixing the 440V AC, 3 phase & neutral Bus-bar chamber etc.as detailed in scope of work & specification of NIT(Sr. No. 1.0 of page No. 12). 2 Bus-Bar chamber with 100A Copper Bus-bar Size of Bus-Bar Chamber: - 550(L) ×410 (H) × 130(D) mmSize of Cu Bas-Bar: - 450(L) ×25(W) ×6(T) mm/phase & neutral 3 Bus-Bar Chamber with 200A Copper Bus-barSize of Bus-Bar Chamber: - 640(L) ×550(H) ×150(D) mm Size of Cu Bas-Bar: - 2×540(L)×25(W)×6(T) mm/phase1×540(L)×25(W)×6(T) mm neutral 4 Providing and fixing of the following TPN/DP sheet steel clad CFS unit along with suitably rated rewirable fuses of HPL/Indo-Asian make including supply of other installation accessories & consumables required for installation work. 5 16A/240V AC DP sheet steel clad CFS unit. 6 32A/415V AC DP do 7 63A/415V AC DP do 8 63A/415V AC TPN sheet steel clad CFS unit 9 125A/415V AC TPN sheet steel clad CFS unit 10 Providing and fixing of the following TPN sheet steel clad Switch Disconnector Fuse (SDF) unit along with suitably rated HRC fuses of L&T make including supply of other installation accessories & consumables required for installation work. 11 32A 415V TPN SDF unit type FN32TPN 12 63A 415V TPN SDF unit type FN63TPN 13 100A 415V TPN SDF unit type FN100TPN 14 125A 415V TPN SDF unit type FN125TPN 15 160A 415V TPN SDF unit type FN160TPN 16 200A 415V TPN SDF unit type FN200TPN 17 250A 415V TPN SDF unit type FN250TPN 18 315A 415V TPN SDF unit type FN315TPN 19 400A 415V TPN SDF unit type FN400TPN 20 630A 415V TPN SDF unit type FN630TPN 21 Supply and fixing of the following Four Pole on load change over switches in sheet steel enclosure with operating handle coupling as per IS 8623 and otherIEC standardsof L&T make. Supply of other installation accessories & consumables required for installation work are also in the contractor’s scope. 22 63A 415V FP on Load change over switch 23 125 A 415V FP on Load change over switch 24 160 A 415V FP on Load change over switch 25 200 A 415V FP on Load change over switch 26 250 A 415V FP on Load change over switch 27 400 A 415V FP on Load change over switch 28 630 A 415V FP on Load change over switch 29 Providing & fixing of the following items of Legrand make. Supply of installation accessories & consumables required for the installation work are in contractor’s scope. 30 MCB TPN DB 4way Cat. No. 507670 31 MCB TPN DB 6way Cat. No. 507671 32 MCB TPN DB 8way Cat. No. 507672 33 MCB SPN DB 8way Cat. No. 507611 34 MCB SPN DB 12way Cat. No. 507612 35 MCB SPN DB 16way Cat. No. 507613 36 MCB SP10A – 32A ‘C’ Curve 37 MCB DP 40A Cat. No. 408637 38 MCB DP 63A Cat. No. 408639 39 MCB FP 40A Cat. No. 408700 40 MCB FP 63A Cat. No. 408702 41 MCB FP 80A Cat. No. 808703 42 Isolator DP 40A Cat. No. 406501 43 Isolator DP 63A Cat. No. 406502 44 Isolator FP 63A Cat. No. 406520 45 Metal one way DP Enclosure Cat. No. 507791 46 Metal one way TP Enclosure Cat. No. 507792 47 Metal one way FP Enclosure Cat. No. 507814 48 Providing & fixing of the following items of L&T make. Supply of installation accessories & consumables required for the installation work are in contractor’s scope. 49 MCB SPN DB 6way Cat No. DBSPN006DD 50 MCB SPN DB 8way Cat No. DBSPN008DD 51 MCB SPN DB 12way Cat No. DBSPN012DD 52 MCB SPN DB 16way Cat No. DBSPN016DD 53 MCB TPN DB 4way Cat No. DBTPE004DD 54 MCB TPN DB 6way Cat No. DBTPE006DD 55 MCB TPN DB 8way Cat No. DBTPN008DD 56 MCB SP 6A-32A “C” curve 57 MCB DP 6A-32A “C” curve 58 MCB DP 40A Cat No. BB20400C 59 MCB DP 63A Cat No. BB20630C 60 MCB TP 40A-63A “C” curve 61 MCB FP 40A-63A “C” curve 62 Isolator DP 40A Cat No. BF204000 63 Isolator DP 63A Cat No. BF206300 64 Isolator FP 40A Cat No. BF404000 65 Isolator FP 63A Cat No. BF406300 66 Isolator FP 80A Cat No. BF408000 67 Isolator FP 100A Cat No. BF410000 68 Vertical TPN DB with 125A MCCB incomer (MCCB + Outgoing Modules) 8way, MCCB + 24 Modules Cat No. DBVTL008DD 69 Vertical TPN DB with 250A MCCB incomer (MCCB + Outgoing Modules) 8way, MCCB + 24 Modules Cat No. DBVTH008DD 70 Vertical TPN DB with 250A MCCB incomer (MCCB + Outgoing Modules) 12way, MCCB + 36 Modules Cat No. DBVTH012DD 71 Analog time switch 3 modules Cat No. AUTS03ANA00 72 Providing & fixing of the following items of Indo Asian make. Supply of installation accessories & consumables required for the installation work are in contractor’s scope. 73 MCB SP10A – 32A ‘C’ Curve HSN Code : 8536 74 MCB SP 40A Cat. No. 811130 HSN Code : 8536 75 MCB SP 63A Cat. No. 811132 HSN Code : 8536 76 MCB DP 20A Cat. No. 811171 HSN Code : 8536 77 MCB DP 40A Cat. No. 811174 HSN Code : 8536 78 MCB DP 63A Cat. No. 811176 HSN Code : 8536 79 MCB FP 40A Cat. No. 811240 HSN Code : 8536 80 MCB FP 63A Cat. No. 811242 HSN Code : 8536 81 DC CB SP 10A Cat. No. 811410 HSN Code : 8536 82 DC CB SP 16A Cat. No. 811412 HSN Code : 8536 83 DC CB SP 32A Cat. No. 811415 HSN Code : 8536 84 DC CB DP 16A Cat. No. 811431 HSN Code : 8536 85 DC CB DP 32A Cat. No. 811434 HSN Code : 8536 86 SPN DB 12way Cat. No. 811808 HSN Code : 8537 87 TPN DB 12way Cat. No. 811853 HSN Code : 8537 88 TPN DB 16way Cat. No. 811854 HSN Code : 8537 89 Vertical TPN DB (X250h3 MCCB incomer) (MCCB + outgoing modules).8way, MCCB + 24 modulesCat No. 811895 HSN Code : 8537 90 Vertical TPN DB (X250h3 MCCB incomer) (MCCB + outgoing modules).12way, MCCB + 36 modulesCat No. 811896 HSN Code : 8537 91 Analog Time switches Model Name : 3mod DIN Daily Cat. No. TA926453 HSN Code : 9107 92 250A MCCB 4 Pole, 415V AC 50Hz. 36kA, Cat. No. 830112HSN Code : 8536 93 250A MCCB 3 Pole, 415V AC 50Hz. 36kA, Cat. No. 830336 HSN Code : 8536 94 Spreaders 4P Cat. No. 830619 HSN Code : 8538 95 Spreaders 4P Cat. No. 830633 HSN Code : 8538 96 Providing & fixing of the following LED light fittings of Philips make. The supply of installation accessories & consumables required for complete installation/ fixing work are in Contractor’s scope. 97 Slimline next 20W LED batten 98 BN100C LED 40W Batten 99 Recess mounted square LED luminaire – 17WModel RC175 LED 15S 100 Recess mounted square LED luminaire – 39WModel RC375 LED 30S 101 Recess mounted round LED luminaire – 22W Model Ultra slim 102 72W LED street light luminaire 103 110W LED street light luminaire 104 147W LED street light luminaire 105 110W LED flood light luminaire 106 150W LED flood light luminaire 107 200W LED flood light luminaire 108 Providing & Fixing of the following LED light fittings of Crompton Greaves make. The supply of installation accessories & consumables required for installation / fixing work are also in the contractor’s scope. 109 Surface mounted type LED luminaire 22W – Radiance Ray. 110 Recess mounted type LED luminaire – 36W (STELLUX-I/P Model) 111 72W LED street light luminaire 112 120W LED street light luminaire Model No. LSTP-120-CDL 113 150W LED street light luminaire 114 120W LED flood light luminaire 115 150W LED flood light luminaire 116 200W LED flood light luminaire Model No. LSFO-200-CDL/60 117 Providing & Fixing of the following LED light fittings of Wipro make. The supply of installation accessories & consumables required for installation / fixing work are also in the contractor’s scope. 118 Garnet 20W Slim LED Batten 119 Garnet Plus 36W LED Batten 120 Recessed mounted round slim panel LED down lighter – 15W. 121 Recess mounted LED luminaire with full diffuser – 31W 122 Recess mounted square ship LED luminaire – 24W 123 70W High performance IP66 LED street light 124 110W High performance IP66 LED street light 125 150W High performance IP66 LED street light 126 120W LED flood light luminaire 127 150W LED flood light luminaire 128 200W LED flood light luminaire 129 Recessed/surfaced mounted LED luminaries with higher efficacy, full diffuser providing uniform light 36 Watt Make: Wipro Cat. No. CRCO10R038HP57GL1 130 High efficient luminaire with 120 Lm/W efficacy helps in power saving & cost-saving. 36 Watt Make: Wipro Cat. No. CRCO10R036HP57HEG2 131 Recess mounted extruded aluminium housing slim luminaire suitable for standalone & continuous TechZone ceiling. PMMA diffuser for uniform homogeneous light. Option in UGR diffuser available 30 Watt Make: Wipro Cat No. LM66-531-XXX-57-XX 132 Surface mounted downlight with pressure die-cast aluminium housing for effective thermal management and high transmission factor PMMA diffuser for better performance 9 WattMake: Wipro Cat No.LD90-111-XXX-30-XX* 133 Surface mounted downlight with pressure die-cast aluminium housing for effective thermal management and high transmission factor PMMA diffuser for better performance 12 WattMake: Wipro Cat No.LD90-141-XXX-30-XX* 134 Surface mounted downlight with pressure die-cast aluminium housing for effective thermal management and high transmission factor PMMA diffuser for better performance 12 WattMake: Wipro Cat No.LD90-191-XXX-30-XX** 135 Recess mounted, bottom opining cleanroom LED luminaire 20 Watt Make: Wipro Cat No. LC20-191-XXX-57-GZ* 136 IP65 luminaire for surface wall mounted applications 10 Watt Make: Wipro Cat No. LWG07-141-XXX-57-G1 137 Surface/Pendant mounted totally enclosed LED luminaire ingress Protection: IP65 40 Watt Make: Wipro Cat No. LE20-491-XXX-57-G1 138 IP65 luminaire with aluminium die-cast housing, toughened glass and unique lens system for enhanced illumination 80 Watt Make: Wipro Cat No. LF19-931-060-57-XX 139 Bollard made of extruded aluminium housing to redefine landscapes with better light quality and enhance architectural design, Rated IP65 7 Watt Make: Wipro Cat No. LB14-880-XXX-65-05 140 Bollard made of extruded aluminium housing to redefine landscapes with better light quality and enhance architectural design, Rated IP65 11 Watt Make: Wipro Cat No. LB14-131-XXX-65-05 141 Providing & Fixing of the following electrical Items. The supply of installation accessories & consumables required for complete installation / fixing work are also in the contractor’s scope. 142 240V AC 1200mm. sweep ceiling fans with down rod up to 2 feet long. Make – Crompton Greaves, Model: High Speed. Fan color: White/ Brown/ Ivory. 143 240V AC 1200mm. sweep ceiling fans with down rod more than 2 feet and up to 5 feet long. Make – Crompton Greaves, Model: High Speed. Fan color: White/ Brown/ Ivory. 144 240V AC 1400mm. sweep ceiling fans with down rod up to 2 feet long. Make – Crompton Greaves, Model: High Speed. Fan color: White/ Brown/ Ivory. 145 240V AC 1400mm. sweep ceiling fans with down rod more than 2 feet and up to 5 feet long. Make – Crompton Greaves, Model: High Speed. Fan color: White/ Brown/ Ivory. 146 240V AC 1200mm. sweep ceiling fans with down rod up to 2 feet long. Make – USHA, Model: Striker Plus (5 star 370 RPM)/Technix 5 star Fan color: White/Brown. 147 240V AC 1200mm. sweep ceiling fans with down rod more than 2 feet and up to 5 feet long. Make – USHA, Model: Striker Plus (5 star 370 RPM)/Technix 5 star Fan color: White/Brown. 148 240V AC 1400mm. sweep ceiling fans with down rod up to 2 feet long. Make – USHA, Model: Striker/Sonata Fan color: White/Brown. 149 240V AC 1400mm. sweep ceiling fans with down rod more than 2 feet and up to 5 feet long. Make – USHA, Model: Striker/Sonata Fan color: White/Brown. 150 240V AC, 400 mm dia. Wall fan with sweep feature make – Crompton/ USHA. 151 240V AC 300mm. impeller dia 900/1400 RPM Heavy duty industrial exhaust fan complete with bracket louvers & shutter of Crompton make. Model – EXHD 300-4-1/300-6-1. 152 240V AC 450mm. impeller dia 900 RPM Heavy duty industrial exhaust fan complete with bracket louvers & shutter of Crompton make. Model – EXHD 450-6-1 153 240V AC 450mm. impeller dia 1400 RPM Heavy duty industrial exhaust fan complete with bracket louvers & shutter of Crompton make. Model – EXHD 450-4-1 154 240V AC 300mm.impeller dia 900/1400 RPM Heavy duty industrial exhaust fan complete with bracket louvers & shutter of USHA make. Model : S.PH TURBO HDEF. 155 240V AC 450mm. impeller dia 900 rpm.Heavy duty industrial exhaust fan complete with bracket louvers & shutter of USHA make.Model : S.PH TURBO HDEF. 156 240V AC 450mm. impeller dia 1400 rpm.Heavy duty industrial exhaust fan complete with bracket louvers & shutter of USHA make.Model : S.PH TURBO HDEF. 157 Supply & Installation including laying & dressing of the following LT power cables on ready cable trenches/in air/concrete wall etc. as detailed in scope of work & specification of NIT(Sr. No. 12.0 of page No. 15). 158 1.1KV grade 3 ½ core × 120 sqmm. PVC/XLPE cables. 159 1.1KV grade 3 ½ core × 95 sqmm.Do 160 1.1KV grade 3 ½ core × 70 sqmm.Do 161 1.1KV grade 3 ½ core × 50 sqmm.Do 162 1.1KV grade 3 ½ core ×35 sqmm. Do 163 1.1KV grade 3 ½ core ×25 sqmm. Do 164 1.1KV grade 4 core × 16 sqmm.Do 165 1.1KV grade 4 core × 10 sqmm.Do 166 1.1KV grade 4 core × 6 sqmm. Do 167 1.1KV grade 2 core × 6 sqmm. Do 168 Excavation of earth cable trench minimum 900mm deep and 450mm wide and supply & installation including underground laying/dressing of the following LT power cables etc. as detailed in scope of work & specification of NIT(Sr. No. 13.0 of page No. 16). 169 1.1KV grade 3 ½ core × 120 sqmm. PVC/XLPE cables. 170 1.1KV grade 3 ½ core × 95 sqmm. Do 171 1.1KV grade 3 ½ core × 70 sqmm.Do 172 1.1KV grade 3 ½ core × 50 sqmm. Do 173 1.1KV grade 3 ½ core ×35 sqmm.Do 174 1.1KV grade 3 ½ core ×25 sqmm.Do 175 1.1KV grade 4 core × 16 sqmm. Do 176 1.1KV grade 4 core × 10 sqmm. Do 177 1.1KV grade 4 core × 6 sqmm.Do 178 1.1KV grade 2 core × 6 sqmm.Do 179 Installation/ fixing of the following electrical items etc. as detailed in scope of work & specification of NIT(Sr. No. 14.0 of page No. 16 to 17). 180 630/400A TPN sheet steel clad CFS unit 181 300/250/200A TPNdo 182 160/125/100A TPNdo 183 63/32A TPN do 184 63A DP Sheet steel clad CFS 185 32A/16A DP Sheet steel clad CFS 186 MCB distribution board 230V AC SPN 4/8/10 way -10A-32A 187 do 12/14/16 way -10A-32A 188 do4/8/10 way -40A-63A 189 do 12/14/16 way -40A-63A 190 MCB distribution board 440V AC TPN 4/6/8 way -10A-32A 191 do10/12/16 way -10A-32A 192 do4/6/8 way -40A-63A 193 do10/12/16 way -40A-63A 194 LED 20/40W Tube light fittings 195 LED recess type fittings 2’x2’ 196 LED recess type fittings 1’x1’ 197 LED recess type fittings round 1’ dia. 198 LED 70/80/90/110W street light fittings 199 LED 150W/200W street light fittings 200 LED 110W/150W flood light fittings 201 LED 150/200W flood light fittings 202 Fan regulator – Electronic type 203 48”/56” sweep ceiling fans with down rod approx 2” long. 204 48”/56” sweep ceiling fans with down rod more than 2” long. 205 230V AC 9”/12” impeller dia 950/1450 rpm. Heavy duty industrial exhaust fan complete with brackets, louver, shutter etc. 206 do 14”/18” impeller dia 950/1450 rpm. do 207 do 20”/24” impeller dia 700/950 rpm. Do 208 Erection of L.T. Feeder Pillar of approx dimension 1000 (L) x 1250/1450 (H) x 700 (D) mm etc. as detailed in scope of work & specification of NIT(Sr. No. 15.0 of page No. 17). 209 Providing and fixing of the following TPN sheet steel clad Switch Disconnector Fuse (SDF) unit along with suitably rated HRC fuses of C&S make including supply of other installation accessories & consumables required for installation work. 210 32A 415V TPN SDF unit type E-CSSDF32D3N 211 63A 415V TPN SDF unit type E-CSSDF63D3N 212 100A 415V TPN SDF unit type E-CSSDF100D3N 213 125A 415V TPN SDF unit type E-CSSDF125D3N 214 160A 415V TPN SDF unit type E-CSSDF160D3N 215 200A 415V TPN SDF unit type E-CSSDF200D3N 216 250A 415V TPN SDF unit type E-CSSDF250D3N 217 315A 415V TPN SDF unit type E-CSSDF315D3N 218 400A 415V TPN SDF unit type E-CSSDF400D3N 219 630A 415V TPN SDF unit type E-CSSDF630D3N 220 Supply and fixing of the following Four Pole on load change over switches in sheet steel enclosure with operating handle coupling as per IS 8623 and otherIEC standardsof C&S make. Supply of other installation accessories & consumables required for installation work are also in the contractor’s scope. 221 63A 415V FP on Load change over switch 222 100A 415V FP on Load change over switch 223 125 A 415V FP on Load change over switch 224 160 A 415V FP on Load change over switch 225 200 A 415V FP on Load change over switch 226 250 A 415V FP on Load change over switch 227 315 A 415V FP on Load change over switch 228 400 A 415V FP on Load change over switch 229 630 A 415V FP on Load change over switch 230 Providing & fixing of the following items of C&S make. Supply of installation accessories & consumables required for the installation work are in contractor’s scope. 231 MCB TPN DB 4way Cat. No. CSDBTPNHDD04 232 MCB TPN DB 6way Cat. No. CSDBTPNHDD06 233 MCB TPN DB 8way Cat. No. CSDBTPNHDD08 234 MCB SPN DB 4way Cat. No. CSDBSPNDD04 235 MCB SPN DB 8way Cat. No. CSDBSPNDD08 236 MCB SPN DB 12way Cat. No. CSDBSPNDD012 237 MCB SPN DB 16way Cat. No. CSDBSPNDD016 238 MCB SP6A – 32A ‘C’ Curve 239 MCB SP40A ‘C’ Curve Cat. No. CSMBS1C40 240 MCB SP63A ‘C’ Curve CSMBS1C63 241 MCB DP 25A Cat. No. CSMBS2C25 242 MCB DP 40A Cat. No. CSMBS2C40 243 MCB DP 63A Cat. No. CSMBS2C63 244 MCB FP 40A Cat. No. CSMBS4C40 245 MCB FP 63A Cat. No. CSMBS4C63 246 Isolator DP 40A Cat. No. CSMBS2ISO40 247 Isolator DP 63A Cat. No. CSMBS2ISO63 248 Isolator FP 63A Cat. No. CSMBS4ISO63 249 Isolator FP 80A Cat. No. CSMBS4ISO80 250 Isolator FP 100A Cat. No. CSMBS4ISO100 251 Metal one way DP Enclosure Cat. No. CSBDMCBEDP 252 Metal one way FP Enclosure Cat. No. CSBDMCBEFP => Limited

Refer document

INR 10000.0 /-

INR 5 Lakhs /-