Annual Repair Maintenance Of Border Security Fence Sh Replacement Of Barbed Wire And Concertina Coil In Aor Of 191 Bn Sbf Now 119 Bn Bsf Under Shq Bsf Teliamura., Teliamura-Tripura
TDR : 32383455
Tender Notice
BOQ
Expired
Teliamura
Tripura
Annual Repair Maintenance Of Border Security Fence Sh Replacement Of Barbed Wire And Concertina Coil In Aor Of 191 Bn Sbf Now 119 Bn Bsf Under Shq Bsf Teliamura.
Name of Work: AR&M of Border security fence (Sh- Replacement of barbed wire & concertina coil) in AOR of 191 BN SBF (Now 119 BN BSF) under SHQ BSF Teliamura).
Sl. No.
Item Description
1
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level andremoval of rubbish upto a distance of 50 m outside the periphery of the area cleared.
2
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
3
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
4
Providing and fixing of G.I. Barbed wire conforming to IS 278-1978 having weight not less than 108gm/metre and not more than 125 gm/metre dully dipped in anti -corrosive bitumastic paint(45 micron AV. thickness) to fencing post, struts and tightening up with G.I. wire of not less than 16 gauge at every length post with tightening bolt including fixing of \"U\" Clips, GI staples to postsas per directions of Engineers in charge.
5
Fixing of punched tape of Concertina coilin between B S Fencing rows after removing deposited silt/earth if any and levelling and dressing of theground each coil to be laid in length of 10 Mtr including tightening the Concertina coil and Barbed Wirewith the help of GI wire 16 guage after dipping each Concertina coil in anti corrossive bitumastic paint to prevent corrossioncomplete (excluding the cost of Concertina coil)as per direction of engineers in charge. ( Concertina coil supplyed by department )
6
Providing and fixing bolts including nuts and washers complete.
7
Credited to Govt by dismantling and taking away the GI barbed wire (in two rows) from existing two rows fencing fixed with angle iron posts at average spacing of 2.0 m as per standard drawing including dismantalling tightening bolts , hooks , GI staples and diagonal barbed wire safty without damage to steel section or alignment of existing angle iron post, collecting all the dismntled barbed wires, fittings and fixtures at identified places , removing all such dimantled materials from the site , clearing and cleaning the site from all dismantled materials and small pieces all complete as per direction of engineer in charge.Measuremet taken per meter length of fence
8
Credited to Govt by dismantling and taking away the existing concertina coil in B S fencing including untieing of GI wires from barbed wire and taking out spikes for CC blocks, rolling of coils and stacking of materials as per direction of engineer in charge (Galvanized punched tope concertina coil ( approx weight 12 kg / coil ) will be handed over to contractor by each no. of coil)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
