District Magistrate has published Construction Of Extra Work Of Parapet Wall Railing Remaining Work Of Ground Floor At Sajib Sangha O Pathaga. Submission Date for this Tender is 02-06-2022. Wall construction Tenders in Coochbehar West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick. |
| 2 | Ordinary cement concrete(mix 1:1.5:3)with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.(ii)River bazree. Ground Floor. |
| 3 | Hire and labour charges for shuttering with centering and necessary staging up to 4 m. using approved stout prop and thick hard wood planks of approved thickness with required bracing for concrete slab, beams, columns, lintels curved or straight including fitting, fixing, and striking out after completion of works. (upto roof of ground floor). b) In Superstructure. (a) 25 mm to 30 mm thk wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 4 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, bindersetc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m. (i) Tor steel / Mile steel. I. SAIL/ TATA/ RINL. For Ground Floor. |
| 5 | Artificial stone in floor, dado, staircase etc.with cement concrete(4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marbel dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement @1.75 kg/sq.m. all complete including all materials and labour.(ii) 25 mm thick. |
| 6 | 125mm thik brick work with1st. Class briks in cement mortar (4:1) in ground floor. |
| 7 | First Floor: |
| 8 | Plaster(wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as dir-ected and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary. (i) With 1:6 cement morter. (b) 20 mm thick plaster. G.Floor. |
| 9 | c] 15 mm thick plaster. |
| 10 | (ii) With 4:1 cement morter. c] 10 mm thick plaster. |
| 11 | B) In First Floor. c] 15 mm thick plaster. |
| 12 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (d) Sal (Local). |
| 13 | Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. (A) Shutter with 25mm thick planks, 19mm thick battens. (b) Sishu,Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 14 | M.S. & W.I. Ornamental grill of approved design with MS flats or bars with joints continuously welded for windows railing etc. fitted and fixed in position with lugs and screwsand lugs in G.F. i) Grillweighting above 10 Kg /m2 and upto 16Kg./m2. For Ground Floor: |
| 15 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx). |
| 16 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length. |
| 17 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm. For first floor. |
| 18 | (iv) 75mm. X 47mm. X 1.70mm. |
| 19 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iii) 100mm long x 10mm dia. bolt. |
| 20 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (ii) 250mm x 19mm dia. bolt. |
| 21 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod). (iii) 100 mm grip x 12 mm dia rod. |
| 22 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. |
| 23 | (a) Priming one coat on steel or other metal surface with with synthetic oil bound primer of approve-ed quality including smoothening surface by sand papering etc. |
| 24 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approve-ed quality including smoothening surface by sand papering etc. |
| 25 | (A) Painting with best quality synthetic enamel paint of aproved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (a) On timber or plastered surface with super gloss: ( hi-gloss) (iv) two coats ( with any shade except white ). |
| 26 | (b) On steel or other metal surface with super gloss: ( hi-gloss)(iv) two coats ( with any shade except white ) |
| 27 | Neat cement punning about 1.5 mm th. In wall, dado, windowsill, floor drain etc. Cement 0.152 cu.m. per 100sq.m. |
| 28 | Colour washing with "ELLA" with a coat of white wash priming including cleaning and smoothening surface thoroughly : (i) Internal (all floors). (b) Two coat. |
| 29 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer"s specification. (iii) Two coats. |
| 30 | Labour welfare cess |
| 31 | GST |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
