Rate Contract For Steel Furniture Rate Contract For Steel Furniture , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Size 1980X860x455mm With Five Shelves Making Sixcompartments. Product Code - Sf-1 , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Size 1980X860x455mm With Five Shelves Making Six Compartments With Extra Locker Inside. Product Code - Sf-2 , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Pigeon Hole Almirah Made Of .8Mm Sheet Size 1980X860x455mm With 8 Pigeon Hole Of Equal Sizes. Product Code : Sf-2 ( A ) , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Size 1320X760x430mm With Three Shelves Making Four Compartments. Product Code - Sf-3 , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Size 1320X760x430mm With Three Shelves Making Four Compartments With Extra Locker Inside.Product Code - Sf-4 , Steel Wardrobe Size 1900X860x560mm, With Threeshelves, Half Locker And Hanging Made From 0.8Mm Sheet. Locker Door Shall Be Constructed From Minimum 1.6Mm Thick Sheet. All Other Specifications As Above. Product Code - Sf-5 , Steel Ward Robe ( Small Size ) , Half Hanging &Half Shelves, Made Out Of 0.80 Mm Sheet, Size1300 Mm ( 52” ) X800mm ( 32” ) X550mm ( 22” ) . Product Code-Sf-5 ( A ) , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Steel Wardrobe Size 45”X48”X22”, With Threeshelves, Half Locker And Hanging Made From 0.8Mm Sheet. Locker Door Shall Be Constructed From Minimum 1.6Mm Thick Sheet.Product Code - Sf-5 ( B ) , Steel Glass Door Cabinet Size 1980X860x455mm With Five Shelves, Sides, Top, Bottom, Back, Shelves & Legs Shall Be Of 0.8Mm Thick Sheet And Doors Of 1Mm Thick Sheet. Other Constructions Details Are Given Above. Thickness Of Glass Shall Be 4Mm. Product Code - Sf-6 , Steel Book Case Size 1675X840x305mm With Four Disappearing Glass Doors. Sides, Top, Bottom, Back, Shelves And Doors Shall Be Made Of 0.80Mm Thick Sheet. Sliding Glass Doors Shall Swivel, Side On Suitable Guides, Which Shall Consist Of Box Fitted With One Roller And Fitted With 10X3mm Flat Iron. Thickness Of Glass Shall Not Be Less Than 4Mm. Each Door Shall Be Fitted With Individual Lock Of Six Levers. Two Chrome Plated Handles Shall Be Fitted To Each Glass Door. Product Code - Sf-7 , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. Size 810X380x760mm With Three Shelves.Product Code - Sf-8 , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth With Side Covered. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. Size 810X380x760mm With Three Shelves.Product Code - Sf-8 ( J ) , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. Size 810X380x1980mm With Six Shelves. Product Code - Sf-9 , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. Size 810X380x2700mm With Nine Shelves.Product Code - Sf-9 ( D ) , Steel Rack With Full Back And Sides Covered With Cr Sheet Of 22 Gauge And Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. Size 810X380x1980mm With Six Shelves.Product Code - Sf-9 ( H ) , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets Size 915X380x1320mm With Four Shelves With 50Mm Width Strip Of 0.8Mm Sheet Rounded And Machined On Three Sides Of Each Compartment. ( Medical Department ) Product Code - Sf-10 , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets Size 2400X900x450mm With Eight Shelves Product Code - Sf-11 , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussetssteel Rack Small Size 810X380x990mm With 3 Shelves Of 0.8Mm Sheet.Product Code - Sf-12 , Steel Writing Table Size 1500X900x760mm With Three Drawers And Cupboard On Other Side Made Out Of 0.80Mm Sheet. Drawer Shall Have Chrome Plated Handle And Locker Door With Knob. Tubular Frame Shall Be Made Of 25X1.25Mm Square Pipe. Top Shall Be Made Of 17Mm Thick Pre Laminated Board. Frame Dimension 740X1370x560mm Product Code - Sf-13 , Steel Writing Table Size 1500X900x760mm With Three Drawers Onlymade Out Of 0.80Mm Sheet. Drawer Shall Have Chrome Plated Handle.Tubular Frame Shall Be Made Of 25X1.25Mm Square Pipe. Top Shall Be Made Of 17Mm Thick Pre Laminated Board. Frame Dimension 740X1370x560mm Product Code - Sf-14 , Steel Writing Table Size 1200X760x760mm With Three Drawers Only Made Out Of 0.80Mm Sheet. Drawer Shall Have Chrome Plated Handle. Tubular Frame Shall Be Made Of 25X1.25Mm Square Pipe. Top Shall Be Made Of 17Mm Thick Pre Laminated Board. Frame Dimension 740X1065x560mmproduct Code - Sf-15 , Steel Writing Table Size 900X600x760mm ( 3X2 ) With Two Drawers Only Made Out Of 0.80Mm Sheet. Drawer Shall Have Chrome Plated Handle. Tubular Frame Shall Be Made Of 25X1.25Mm Square Pipe. Top Shall Be Made Of 17Mm Thick Pre Laminated Board. Product Code - Sf-15 ( B ) , Computer Table: Size 1200X600x760mm With Printer, Self Top 17Mm Pre-Laminated Board, Frame Of Sq. Steel Pipe Of25x1mmproduct Code - Sf-16 , Computer Table: Size 1200X600x760mm With Printer, Self Top 17Mm Pre-Laminated Board, Frame Of Sq. Steel Pipe Of25x1mmwith One Drawerproduct Code - Sf-16 ( A ) , Computer Table:Size 1200X600x760mm, Frame Of 25X1mm Sq. Pipe With One Side Three Drawers Top Of 17Mm Pre-Laminated Board.Product Code -Sf-17 , Steel Tubular S Type Office Chair With Continuous Arms. Frames Shall Be Made Of 25X1.6Mm Round Pipe. Seat & Back Shall Be Of Teak Wood Frames With Natural Teak Colour / Black Polish, Woven With Superior Cane. Size Of Seat Shall Be 450X420mm And Size Of Back Shall Be 450X400mm. Height Of Seat From Ground Shall Be 400Mm And Top Of Back 865Mm. Arms Shall Have Maximum Curve In Front For Comfort.Product Code - Sf-20 , Chair With Writing Pad :Seminar Chair With Frame Of 25X1.6Mm Round Pipe With H.D Foam Cushion Of 50Mm Seat & Back With Tapestry Cloth / Leather Foam Over 12Mm Ply & Writing Pad Of 18Mm Pre Laminated Board.Product Code: Sf-20 ( A ) , Steel Office Chair Frame Of 25X1.6Mm Round Pipe , Seatback Of Ply Wood 12Mm Ply Wood With 75Mm High Densityfoam Cushion Seat And 50Mm High Density Foam Back Covered With Tapestry Cloth / Leather Foam With Pvc Arms 18X18”Seat And 18”X21 Back. Back Support Of 50X4mm Flat.Product Code - Sf-21 , Steel Office Chair Without Arms Frame Of 25Mmx1.6Mm Round Pipe With Seat And Back Of 12Mm Ply Wood With50mm High Density Foam In Seat And Back Covered With Superior Tapestry Cloth / Leather Foam .Seat Size 16X16, Back Size 8X16. Product Code - Sf-22 , Steel Office Chair Frame ( With Arms ) Of 25Mmx1.6Mm Round Pipe, Superior Pvc Handle Base Frame Of 25Mmx1.6Mm Round Pipe With Foam Seat And Back Built In Shape With Soft Pvc Handle Covered With Superior Fabric / Leather Foam. ( Seat Size 18”X18” And Back 18”X12” ) Product Code - Sf-23 , Office Revolving Chair ( Executive ) Low Back Godrej Type With Plastic Base Product Code-Sf-24 , Officer Revolving Chair Superior Type Having 75Mm Foam Seat And Back With Pu Arms Fitted With Plastic Base With High Back, With Push Type Mechanism With Superior Casters With Manual Lifting System Product Code -Sf-25 , Officer Revolving Chair Superior Type Having 75Mm Foam Seat And Back With Pu Arms Fitted With Plastic Base With Low Back, With Push Type Mechanism With Superior Casters With Manual Lifting System Product Code -Sf-26 , Writing Pad ( Plastic ) Chairs With Steel Frame 25X1.25Mm With Plastic Shell Of Prima / Supreme / Ballowwal Quality With Plastic Writing Pad. Product Code - Sf-27 , Plastic Chair With Steel Frame 25X1.25Mm With Plastic Shell Of Prima / Supreme / Modrena / Ballona Quality. Product Code - Sf-27 ( A ) , Computer Chair Revolving With Steel Base Having High Density Foam Seat, Cushion Of Seat 65Mm And Back Of 45Mm Pvc Arms With Manual Lift System. Product Code - Sf-28 , Computer Chair Revolving With Steel Base Having High Density Foam Seat, Cushion Of Seat 65Mm And Back Of 45Mm Without Arms, With Manual Lift System.Product Code - Sf-29 , Steel Easel Of 1520Mm Height Made From 25Mmx1mm Round Pipe. One Support Of 25Mmx1mm Pipe Shall Be Provided At Rear. The Support Rod Shall Be Fitted With A Hook Made From 8Mm Thick Ms Round To Prevent The Easel From Tilting. Two U Type Hooks Of 8Mm Ms Round Shall Be Provided In Front To Hold The Black Board. Product Code - Sf-30 , Steel Bench With Arms, Size 1830X355mm.Frame Shall Be Made From 25X1.0Mm Round Pipe. Seat And Back Shall Be Made From 1.00Mm Sheet. Back Rest Shall Be 200Mm Wide. The Seat And Back Shall Have Lipped Flanges Of 25Mm Width And 15Mm Depth. Top Of The Back Shall Be 815Mm High From Ground Level & Seat 460Mm High. Enamel Fin Finish. Product Code - Sf-31 , Steel Bench Without Arms And Back Rest Size 1830X355mm. Other Specifications As Sf-21 Seat Height From Ground Level Shall Be 460Mm. Product Code - Sf-32 , Steel Bench Three Seater With Perforated Steel Seat And Back. Chair Frame Of 20X1.16Mm Round Pipe Base Of 45 Mm, 16 Gauge Dia M.S. Pipe. Powder Coated Based Frame. Product Code - Sf-32-A , Steel Bed Size 1930X915 With Folding Legs. Frame Shall Be Made From 30X1.6Mm Ms Round, Pipe Having Four Round Hooks Of 25Mm Dia Meter. Legs Shall Be Folded With The Help Of U Shaped Brackets Of 2Mm Thickness. Legs Shall Be Re-Inforced With 25X1.6Mm Round Pipe Fitted With Nawar. Nylonnawarproduct Code - Sf-33 ( A ) , Steel Bed Size 1930X915 With Folding Legs. Frame Shall Be Made From 30X1.6Mm Ms Round, Pipe Having Four Round Hooks Of 25Mm Dia Meter. Legs Shall Be Folded With The Help Of U Shaped Brackets Of 2Mm Thickness. Legs Shall Be Re-Inforced With 25X1.6Mm Round Pipe Fitted With Nawar. Cotton Nawarproduct Code - Sf-33 ( B ) , Steel Plate Form Bed With Steel Frame Of 6’X3’X18” Made Of Rectangular Pipe 1”X2” 16 Guage, Support Ofsq. Pipe 1”X1” 16 Guage Top Of 12Mm Commercial Ply With Four Steel Sheet Gussets On Corners.Product Code - Sf-35 , Student Desk For Two Students, Top / Seat Of 17Mm Pre Laminated Board Properly Polished Duly Lipped With 17Mm Half Round Beading Wooden / Pvc Taping In All Sides , Seat Size, 900X250x460mm ( H ) , Top Table Size 900X350x760mm ( H ) , Support Frame Of Square Pipe Consisting Of 4 Legs, Complete Rectangular Frame Under The Table / Seat Jointed Properly, Made From 25Mmx1.25Mm Square Pipe. The Vertical Gap Between The Table & Seat Shall Not Be Less Than 300Mm For Smooth Movement Of Students. Product Code-Sf-36 , Student Desk For Single Student, Top / Seat Of 17Mm Pre Laminated Board Properly Polished Duly Lipped With 17Mm Half Round Beading Wooden / Pvc Taping In All Sides , Seat Size, 600X250x460mm ( H ) , Top Table Size 600X350x760mm ( H ) , Support Frame Of Square Pipe Consisting Of 4 Legs, Complete Rectangular Frame Under The Table / Seat Jointed Properly, Made From 25Mmx1.25Mm Square Pipe. The Vertical Gap Between The Table & Seat Shall Not Be Less Than 300Mm For Smooth Movement Of Student. Product Code - Sf-37 , Student Desk For Two Students, Top / Seat Of 17Mm Pre Laminated Board Properly Polished Duly Lipped With 17Mm Half Round Beading Wooden / Pvc Taping In All Sides , Seat Size, 900X250x460mm ( H ) , Top Table Size 900X350x760mm ( H ) , Support Frame Of Square Pipe Consisting Of 4 Legs, Complete Rectangular Frame Under The Table / Seat Jointed Properly, Made From 25Mmx1mm Square Pipe. The Vertical Gap Between The Table & Seat Shall Not Be Less Than 300Mm For Smooth Movement Of Student. Product Code- Sf-38 , Student Desk For Single Student, Top / Seat Of 17Mm Pre Laminated Board Properly Polished Duly Lipped With 17Mm Half Round Beading Wooden / Pvc Taping In All Sides , Seat Size, 600X250x460mm ( H ) , Top Table Size 600X350x760mm ( H ) , Support Frame Of Square Pipe Consisting Of 4 Legs, Complete Rectangular Frame Under The Table / Seat Jointed Properly, Made From 25Mmx1mm Square Pipe. The Vertical Gap Between The Table & Seat Shall Not Be Less Than 300Mm For Smooth Movement Of Student. Product Code-Sf-39 , Steel Laboratory Table 1830X1145x765mm.One Cupboard On All Four Corners, Top And Cupboard Made Of Cr Sheet 22 Guage ( 0.8Mm ) Support Structure Of 25X1.25Mm Roundpipe. Product Code - Sf-40 , Steel Folding Dining Table Size 1830X1220x765mm Frame Of 30X1.25Mm Square Pipe With Supports Of 25Mmx1.25Mm Sq.Pipe Top Of Pre-Laminated Particle Board 17Mm Thick On Frame Of Angle Iron 35X35x5mm With Adequate Support.Product Code - Sf-41 , Steel Filing Cabinet 1370X685x460mm With 4 Drawers Rolled And Roller All Made Of 0.8Mm Cr Sheet With Locking Arrangementproduct Code - Sf-42 , Steel Filing Cabinet 1370X685x460mm With 2 Drawers Rolled And Roller All Made Of 0.8Mm Cr Sheet With Locking Arrangementproduct Code - Sf-42 ( F ) , Steel Tea Poy With Sun Mica Top Size 1 ½’ X2’, Frame Of 1”X20 Guage Square. Pipe. Product Code – Sf-43 , Steel Tea Poy With Sun Mica Top Size 4X2, Frame Of 1”X20 Guage Square. Pipe. Product Code – Sf-43 ( A ) , Visitor Chair Frame Made Of 1’X16g, Pipe Seat And Back Of Pu Foam Fitted Over Steam Pressed 12Mm Ply Bend To Shape, Covered With Superior Leatherette Touch Foam / Superior Fabric With Fine Painting With Pvc Arm Superior Type.Product Codesf-44 , Revolving Chair High Back With Steel Frame And Chrome Base With Fancy Teakwood Handle / Chrome Handle With Cushion On Top Of Arm Bend To Shape Foam Fitted Seat And Back, Bend To Shape With Gas Cylindrical Lifting System Fitted In Chair With Fine Castor Wheels Of Superior Quality. Product Codesf-45 , Student Desk For Two Student Top & Seat Fitted With Laminated Particle Board Of 17Mm Frame Made Of 25Mm Square Pipe Of 1.25Mm Thickness Top And Seat Of Frame Of Angle Iron 20X20x3mm. Top Size 900X350x760mm. Seat Size 900X200x460mm Product Codesf-46 , Student Desk For Single Student Top & Seat Fitted With Laminated Particle Board Of 17Mm Frame Made Of 25Mm Square Pipe Of 1.25Mm Thickness Top And Seat Of Frame Of Angle Iron 20X20x3mm. Top Size 600X350x760mm. Seat Size 600X200x460mm Product Codesf-46 ( A ) , Steel Bench Size 6’ With Back & Arms Made Of 1” Square Pipe, Fitted With Laminated Board 17Mm Seat & Back.Product Codesf-47 , Double Sleeping Bunks Made Of 50Mm Ms Tube Frame, 12Mm Thick Plywood With 37Mm Foam Covered With High Quality Rexene Welded With Overall Size 1830X900x1800mm Height With 25Mm Pipe Stairs. The Bed Frame Will Be Made Of 40X40x5mm Angle And 40X5mm Flat In The Centre Of Frame ( As Per Sample ) . M. S. Rod Of 10Mm On Both Sides Of Upper Frame For Support Shall Be Provided. The Frame Will Be Provided With Red Oxide Primer And Then A Coat Of Silver Paint.Product Codesf-48 , Writing Pad Chairs Frame Made Of 1”X18g Conduit Pipe With Good Quality Plastic Shell With 17Mm Pre-Laminated Writing Pad On Right Side With Fine Polish.Product Codesf-49 , Garden Bench 3 Seater, 5’ Length Made Of Heavy Duty Cast Iron Base With Ornamental Look Sides Fitted With Wooden Strip 1.5”X2” Duly Painted. Product Codesf-50 , Student Steel Desk Double Seated Top Size 36”X14”X30” And Seat Size 36”X8”X18” With Side And Back Covered Also With Shelf Of 17 Thick Wood Base Prelaminated Board Frame Made Of 1.25Mm Thick 1” Sq. Pipe With Pvc Edge Bending Tape.Product Codesf-51 , Steel Bench 5’ Length 3 Seater Comprises Of Heavy Duty Cast Iron Sides With Ornamental Look And Provided With 10 Nos Swg Pipes Size 65X25mm Duly Painted Weight Ranging From 65 Kg. To 68 Kg. Including Painting. Product Codesf-52 , Steel Bench 5’ Length 3 Seater Comprises Of Heavy Duty Cast Iron Sides With Ornamental Look And Provided With 10 Nos Swg Pipes Size 50X25mm Duly Painted Weight Ranging From 50 Kg. To 52 Kg Including Painting. Product Codesf-52 ( A ) , Executive Visitor Chair Cushioned Seat & Back Covered With Superior Leatherette With Chrome Plated / S.S. Steel Frame Fancy In Shapewith Cushion On Armproduct Codesf-53 , Visitor Chair Made Of Heavy Chrome Coated Steel Pipe Having Cushioned Seat & Back Superior Quality Covered With Superior Leather Foam Cloth With Wooden Arms / Pu Armsproduct Codesf-54 , Iron Chest ( Fire Proof ) Size 2’X1.5’X1.5’ Made Of M.S Sheet 10 / 12 Guage ( 3.15 / 2.5Mm ) With Inside Locker Provided With Heavy Duty Lockproduct Codesf-55 , Iron Chest ( Fire Proof ) Size 2’X2’X3’ Made Of M.S Sheet 10 / 12 Guage ( 3.15 / 2.5Mm ) With Inside Locker Provided With Heavy Duty Lock Product Codesf-55 ( A ) , Lab Stools With High Raised Back, Revolving Cushioned Lather Seat. Provided With Lever For Adjustment Of Height And Tyres For Mobility Product Codesf-56 , Revolving Stool Three Legged With 12’’ Da Stainless Steel Top Over Ms Top Three Legs Of 1-1 / 4’’X16g Pipe. Height Adjustable From 18’’ To 27’’. Adjustable Screw Of 1’’ Dia Ms Round 10’’ Long In 1-1 / 4’’ Dia Ms Pipe 10’’ Long Product Codesf-56 ( A ) , Steel Stool Size 15”X15”X18” Made Of 1” Round Ms Pipe 1Mm Thick Top Of Cr Sheet 0.80Mmproduct Codesf-57 , Steel Bed Single Size 6’X3’ Frame Of 25Mmx65mm X16gconduit Pipe With Two Stiffener In Bottom Of Size 1”X1” Under 12Mm Thick Ply Wood, Back Rest And Footrest Made Of 32Mmx32mmx16g Conduit Pipe With 19Mm Square Pipe Bearer On All Side Of 17Mm Thick Pre Laminated Board. Laminated On Both Side In Back Rest And Foot Rest.Product Codesf-58 , Steel Visitor Benches Three Seater Seat Size 20” Height Of Back From Ground 30” Seat Back Of Steel Jali With Handles Duly Chrome Coated Of Superior Quality Product Codesf-59 , Steel Visitor Benches Two Seater Seat Size 20” Height Of Back From Ground 30” Seat Back Of Steel Jali / Cushion Seat & Back With Handles Duly Chrome Coated / Powder Coated Of Superior Quality Product Codesf-59 ( A ) , Supply Of Customized Classroom Desk Straight Design With Separate Seat Writing Bench With Shelf Covered From Front And Side Frames Made Of M / S Hollow Square Pipe 1”X1” ( 2Mm / 14 Gauge ) ( 7.5 Kg Per 6Mtr Length ) . The Top Seat Front Sides And Shelf Finished With 19Mm Thick Laminated Commercial With One Side Having Teak Lamination ( Machine Pressed ) And Edges To Be Finished With Teak Wood Lapping Duly Polished. ( Rate Per Rft ) Product Codesf-60 , Supply Of Customized Classroom Desk In Diagonal Room Specification As Above. Product Codesf-61 , Steel Bench Cum Desk Double Seated With Prelaminated Mdf Board With Top Size 42”X14”Seat Size 24”X10” And Back 24”X8” Frame Made Out Of 25Mm Sq Pipe 18 Gauge Having Bottom Frame Size 36”X39” Table Height 30” And Seat Height 18” Having Cr Sheet Shelf 22 Gauge Beneath Table Top, Duly Spray Painted. Product Codesf-62 , Steel Bench Cum Desk Single Seated With Prelaminated Mdf Board With Top Size 24”X14”Seat Size 24”X10” And Back 24”X8” Frame Made Out Of 25Mm Sq Pipe 18 Gauge Having Bottom Frame Size 36”X22” Table Height 30” And Seat Height 18” Having Cr Sheet Shelf 22 Gauge Beneath Table Top, Duly Spray Painted. Product Codesf-63 , Executive Visitor Chair Frame Made Of Rectangular Section Pipe Of 16 Gauge With Chrome Plated With Cushioned Seat And Back On Bend To Shape Hot Press Ply Leatheradeproduct Codesf-64 , Visitor Chair Frame Made Of 1”X16 Gauge Pipe “S” Type With Leatheride Cushioned Seat And Back With Arm Fitted With Wooden Handle / Pu Handle. Product Codesf-65 , Visitor Chair Made Of Chrome Coated Steel Pipe Cushioned Seat & Back Withwooden Handle / Pu Handle. Product Codesf-66 , Restaurant Chair All Made Of S.S Conduit Pipe Of 16 Guagewith Steam Pressed Rubber Wood Seat With Back Of Ornamental Design Of Stainless Steel Product Codesf-67 , Restaurant Chair All Made Of S.S Conduit Pipe Of 16 Guagewith Cushioned Seat And Back Covered With Superior Fabric &Letaheride Product Codesf-68 , Restaurant Table Size 4’X2’ All Made Of Ss Conduit Pipe Of 16 Gaugewith Two Pillar Design Top Of 25Mm Thick Prelaminated Board With Pvc Molded On All Side. Product Codesf-69 , Restaurant Table Size 3’X3’Frame Made Of S.S Conduit Pipe Of 16 Guagepillar Design Top Of 25Mm Thick Prelaminated Board With All Sides Pvc Bending Product Codesf-70 , Revolving Chair ( Leather ) Having 75Mm High Density Foam On Seat & 50Mm On Back / Net ( Jali ) Back Ortho Type Covered With Leather Foam Velvet / Fabric Over Superior Steel Base / Pvc With Hydraulic Up Down And Back Adjustment. The Base Shall Be Fitted With Heavy Ball Casters. Product Codesf-71 , Executive Visitor Chair Stainless Steel Frame Made Of Pipe 1” 16 Gauge With Cushion Seat & Back Alongwith Heavy Cushioned Arm On Pvc Arm. Product Codesf-72 , Steel Filing Cabinet With 4 Drawer All Made Of 22 Gauge Exect Front Pannel Of 20 Gauge With Plastic Handlewith Push Single Typelocking Arrangementof The 4 Drawer For Pretrated & Epoxy Powder Coating Finish Product Codesf-73 , Visitor Chair Frame Made Of 25Mm Ss / Chrome Back Made Of Ortho Net Having Adjustable Pressure Pillow In Back For Adjustment, Pu Seat With Soft Pu Arms, Neatly Upholstered In Leatherette / Heavy Fabric Upholstery Product Codesf-74 , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Size 1980X860x455mm With Five Shelves Making Sixcompartments With Epoxy Powder Coated Paint Product Codesf-75 , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Size 1980X860x455mm With Five Shelves Making Sixcompartments With Extra Locker Inside With Epoxy Powder Coated Paint Product Codesf-76 , Steel Cabinet With Side, Doors, Back, Top, Bottom Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm Width And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Steel Wardrobe Size 45”X48”X22”, With Threeshelves, Half Locker And Hanging Made From 0.8Mm Sheet. Locker Door Shall Be Constructed From Minimum 1.6Mm Thick Sheet With Epoxy Powder Coated Paint Product Codesf-77 , Steel Glass Door Cabinet Size 1980X860x455mm With Five Shelves, Sides, Top, Bottom, Back, Shelves & Legs Shall Be Of 0.8Mm Thick Sheet And Doors Of 1Mm Thick Sheet. Other Constructions Details Are Given Above. Thickness Of Glass Shall Be 4Mm With Epoxy Powder Coated Paint Product Codesf-78 , Steel Book Case Size 1675X840x305mm With Four Disappearing Glass Doors. Sides, Top, Bottom, Back, Shelves And Doors Shall Be Made Of 0.80Mm Thick Sheet. Sliding Glass Doors Shall Swivel, Side On Suitable Guides, Which Shall Consist Of Box Fitted With One Roller And Fitted With 10X3mm Flat Iron. Thickness Of Glass Shall Not Be Less Than 4Mm. Each Door Shall Be Fitted With Individual Lock Of Six Levers. Two Chrome Plated Handles Shall Be Fitted To Each Glass Door With Epoxy Powder Coated Paint Product Codesf-79 , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. Size 810X380x760mm With Three Shelves With Epoxy Powder Coated Paint Product Codesf-80 , Steel Rack Shall Have Slotted Steel Angle Posts Of 37X37x1.25Mm. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. Size 810X380x1980mm With Six Shelves With Epoxy Powder Coated Paint Product Codesf-81 , Steel Filing Cabinet 1370X685x460mm With 4 Drawers Rolled And Roller All Made Of 0.8Mm Cr Sheet With Locking Arrangement With Epoxy Powder Coated Paint Product Codesf-82 , Steel Bench 5’ Length 3 Seater Comprises Of Heavy Duty Cast Iron Sides With Ornamental Look And Provided With 10 Nos Swg Pipes Size 65X25mm Duly Painted Weight Ranging From 65 Kg. To 68 Kg. Including Painting With Epoxy Powder Coated Paint Product Codesf-83 , Steel Bench 5’ Length 3 Seater Comprises Of Heavy Duty Cast Iron Sides With Ornamental Look And Provided With 10 Nos Swg Pipes Size 50X25mm Duly Painted Weight Ranging From 50 Kg. To 52 Kg Including Painting With Epoxy Powder Coated Paint Product Codesf-84 , Steel Bed Single Size 6’X3’ Frame Of 25Mmx65mm X16gconduit Pipe With Two Stiffener In Bottom Of Size 1”X1” Under 12Mm Thick Ply Wood, Back Rest And Footrest Made Of 32Mmx32mmx16g Conduit Pipe With 19Mm Square Pipe Bearer On All Side Of 17Mm Thick Pre Laminated Board. Laminated On Both Side In Back Rest And Foot Rest With Epoxy Powder Coated Paint Product Codesf-85 , Steel Almirah 78X36x18 Made Of 1Mm Sheet Having Five Shelves Making Six Compartments Fitted With Heavy Duty Locks, Godrej Fancy Handle And Superior Tikki For Key Hole. Almirah To Be Finished In Enamel Paint Product Codesf-86 , Steel Almirah 78X36x18 Made Of 0.80Mm Sheet Having Five Shelves Making Six Compartments Fitted With Heavy Duty Locks, Godrej Fancy Handle And Superior Tikki For Key Hole. Almirah To Be Finished In Enamel Paint Product Codesf-86 ( A ) , Steel Almirah Size 3X6x1.5 ( Wxhxd ) Feet Made Of 18 Gauge Steel Sheet With Locking Facility And Four Shelves Product Codesf-87 , Steel Almirah 8X5.5X18 Made Of 1Mm Sheet Having Five Shelves Making Six Compartments Fitted With Heavy Duty Locks, Godrej Fancy Handle And Superior Tikki For Key Hole. Almirah To Be Finished In Enamel Paint Product Codesf-88 , Student Desk For Single Student, Top / Seat Of Steel Properly Paint, Seat Size, 600X250x460mm ( H ) , Top Table Size 600X350x760mm ( H ) , Support Frame Of Square Pipe Consisting Of 4 Legs, Complete Rectangular Frame Under The Table / Seat Jointed Properly, Made From 25Mmx1.25Mm Square Pipe. The Vertical Gap Between The Table & Seat Shall Not Be Less Than 300Mm For Smooth Movement Of Student. Product Codesf-89 , Laboratory Stool Made Out Of Chrome Coated Conduit Pipe With Height 18” Having Cushion / Leatherette Seat Product Codesf-90 , Folding Table Size 4’X2.5’ Frame Made Of Crc Steel Round Pipe 1” Dia 16 Gauge Wall Thickness, Electric Mig Welded Top Made Of 19Mm Thick Bwr Commercial Ply Fitted With Non Woven Cloth Top Fitted With Aluminium Strip 20X3mm And All Fitted With Velcro Tap Fitted With Spring For Folding System And Proper Stacking, Frame With Powder Coated Product Codesf-91 , Folding Table Size 4’X4’ Frame Made Of Crc Steel Round Pipe 1” Dia 16 Gauge Wall Thickness, Electric Mig Welded Top Made Of 19Mm Thick Bwr Commercial Ply Fitted With Non Woven Cloth Top Fitted With Aluminium Strip 20X3mm And All Fitted With Velcro Tap Fitted With Spring For Folding System And Proper Stacking, Frame With Powder Coated Product Codesf-92 , Auditorium Chair: Providing And Placing Auditorium Chair Having The Seat Rest Assembly Is 1.5 Thk Marine Plywood Insitu Moulded With Moulded Polyurethane Foam & Upholstered With Fabric. Seat Size:45.0 Cm. ( W ) X 44.5 Cm ( D ) X12.0Cm ( T ) @ Front Edge And 8.0Cm @ Rear Edge. The Backrest Assembly Is Made Up Of A M.S.Fabricated Frame Insitu Moulded With Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size:46.5 Cm ( W ) X62.5 Cm ( D ) X9.5 Cm ( T ) Avg. The Polyurethane Foam For Seat And Back Is Moulded With Density= 45+ / - 2 Kgs / Cu.M. And Hardness = 20 = / =2 On Hampden Machine At 25% Compression. The Armrest Is Made Up Of Integral Polyurethane Foam And Reinforced With M.S Insert. The Armrest Is Available In Two Options With & Without Cup Holder. The Sliding Mechanism Is Fabricated From M.S. Sheets Forming Linkages Providing A Synchronous Motion For The Seat & Back. The Sliding Stroke For The Seat Is 100Mm. The Mechanism Houses The Seat & Back. The Chair Rests On The Ground On Two Side Panels Frames Made Of 2.5Mm Thk. Cr Steel. Each Side Panel Is Fitted With Two Upholstered Particle Board Of 9Mm Thk. The Side Panel Frame Is Grouted To The Floor Using Foundation Expansion Bolts Through Base Plate. All Steel Components Are Epoxy Polyester Powder Coated Complete As Per The Direction Of Engineer-In-Charge. Product Codesf-93 , Steel Folding Bed Size 75”X36” Made With 16 Gauge And Ply Top 17Mm Product Codesf-94 , Baby / Student Chair Frame Made Of 19Mm Sq Crc Pipe And 38X19mm Rectangle Crc Pipe Seat And Back Of 17Mm Pre Laminated Wood Particle Board Size 16”X12” & 6”X16” With Edge Bending Tape All Around Of Rahu Quality With M.S. Mesh Fitted 2 Side Of The Chair, Frame Painted With Appoxy Powder Coated Paint Product Codesf-95 , Baby / Student Desk Frame Made Of 19Mm Sq Crc Pipe And 38X19mm Rectangle Crc Pipe Seat And Back Of 17Mm Pre Laminated Wood Particle Board Size 36”X18” With Edge Bending Tape All Around Of Rahu Quality With M.S. Mesh Fitted 2 Side Of The Chair, Frame Painted With Appoxy Powder Coated Paint Product Codesf-96 , Student Desk For Two Students Size Of Top 910X355x762mm, Seat Size 910X254x455mm Made Out Of Square Pipe 25X25x1.25Mm ( 18 Gauge ) . Top And Seat Of 17Mm Pre Laminated Board Properly Lipped With 0.8Mm Pvc Taping In All Sides Duly Pressed With Machine. Product Codesf-97 , Student Desk For Two Students Size Of Top 910X355x762mm, Seat Size 910X254x455mm Made Out Of Square Pipe 25X25x1.25Mm ( 18 Gauge ) . Top And Seat Of 17Mm Pre Laminated Board Properly Lipped With 0.8Mm Pvc Taping In All Sides Duly Pressed With Machine With Shelf Of 17Mm Pre Laminated Board. Product Codesf-98 , Steel Desk For Two Students Made Out Of Square Pipes 25X25x1.25Mm ( 18 Gauge ) With Top 762X355x762mm And 762X200x455mm Seat Of Pre Laminated 17Mm Board Having Exposed Edges Of Top And Seat With 0.8Mm Thick Machine Pressed Pvc Edge Bands. Product Codesf-99 , Steel Desk For Two Students Made Out Of Mild Steel Square Pipe 25X25x1.25Mm ( 18 Gauge ) With Top 36”X14”, Seat 36”X10”, Shelf 32”X12” And Front Cover 34”X6” Of Pre Laminated 17Mm Particle Board Of Density 600-700 Kg Per Cubic Meter ( Tolerance +- 10% ) Having Exposed Edges Of Top, Seat, Shelf And Back Covered With 0.8Mm Thick Machine Pressed Pvc Edge Bands. Eight Number Shoes For Legs Made Up Of High Quality Rubber And Enamel Paint Frame. Product Codesf-100 , Steel Built In Almirah Steel Built In Almirah Wall To Wall To Fitting Made Of 22 Gauge Cr Sheet Having Shelves And Provision For Hanging, Duly Painted Product Codesf-101 , Almirha :Material Of Almirah : - Ms Sheet Sheet Thickness: - 1.0 Mm Sheet Thickness Of Shelve : -0.8 Mm Sheet Thickness Of Pedestal : - 0.8 Mm Material Of Locks And Keys : -Steel No. Of Shelves : - 04 Height Of Almirah : - 1855 Mm Width Of Almirah : - 910 Mm Depth Of Almirah : - 480 Mm Product Codesf-102 , Office Chairs :Pedestal Base :- Abs Plastic With Abs / Nylon Twin Caster Wheels Minimum 5 Nos. Of 50Mm Size Arm Material: - Steel Covered With Polyurethane Seat Material: -Pu Foam Covered With Fabric Material Of Fabric Of Seat : -100% Polyester Fabric Overall Chair Height: -920 ( ± 15Mm ) Backrest Height:- 460 Millimeter ( ± 15Mm ) Backrest Width :- 440 Millimeter ( ± 10Mm ) Seat Height :- 480 Mm ( ± 15Mm ) Seat Width : - 440 Mm ( ± 10Mm ) Seat Depth : - 460 Mm ( ± 10Mm ) Product Codesf-103 , Visitor Chair : Material :-Polyster Size Or Material :- 14 Swg 25 Mm Round Pipe Chair Height :- 890 Mm Seat Depth :- 450Mm ( ± 10Mm ) Seat Width :- 470Mm ( ± 10Mm ) Seat Height :- 430Mm ( ± 5Mm ) Product Codesf-104
