Kr1394 T01-Choolur Muriyamthodu Beach Road Pmgsy-Iii- 2021-22 (Batch-1) Package No. Kr1394 Thalikulam Block, Thrissur District Including Maintenance For Five Years After Construction of road
Tender Value
1.56 Crore
Estimated cost
Bid Submission
31 May 2022
0 days left
EMD
3.12 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Kr1394 T01-Choolur Muriyamthodu Beach Road Pmgsy-Iii- 2021-22 (Batch-1) Package No. Kr1394 Thalikulam Block, Thrissur District Including Maintenance For Five Years After Construction of road
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-May-2022 | Due Date Extended - (31-05-2022) | Admin Corrigendum Date Extend | 01-Jun-2022 |
| 2 | 01-Jun-2022 | Date Extension | Date | 03-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | T-32-Choolur Muriyamthodu Beach Road 3060m |
| 2 | CLEARING AND GRUBBING |
| 3 | Clearing Grass and Removal of Rubbish - Clearing grass and removal of rubbish upto a distance of 30m outside the priphery of the area as per technical specification Clause 200.1 |
| 4 | DISMANTLING & SCARIFYING |
| 5 | (A) Dismantling Stone Masonry- Dismantling existing structures like culverts, bridges, retaining walls and other structures comprising of masonry, cement concrete, woodwork, steelwork, including T&P and scaffolding whereever necessary, sorting the dismantled material, disposal of unserviceable and stacking serviceable material with all lift and lead of 1000m as per technical specification Clause 202.1 - Rubble Stone Masonry in Cement Mortar |
| 6 | Dismantling of structures- Dismantling existing structures like culverts, bridges, retaining walls and other structures comprising of masonry, cement concrete, woodwork, steelwork, including T&P and scaffolding whereever necessary, sorting the dismantled material, disposal of unserviceable and stacking serviceable material with all lift and lead of 1000m as per technical specification Clause 202.1 -Cement Concrete(PCC) - By Mechanical Means |
| 7 | Dismantling of structures- Dismantling existing structures like culverts, bridges, retaining walls and other structures comprising of masonry, cement concrete, woodwork, steelwork, including T&P and scaffolding whereever necessary, sorting the dismantled material, disposal of unserviceable and stacking serviceable material with all lift and lead of 1000m as per technical specification Clause 202.1 -Reinforced Cement Concrete (RCC) - By Mechanical Means |
| 8 | Removing all types of Hume Pipes - and stacking within a lead of 1000m including earthwork and dismantling of Masonry works as per technical specification clause 202.1 - Above 600mm upto 900mm dia Hume Pipes |
| 9 | Scarifying Existing Bituminous Surface to a depth of 150mm - by Mechanical Means - Scarifying the existing granular surafce to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per technical specification Clause 301.4.1 |
| 10 | Dismantling flexible Pavements- Dismantling of flexible Pavements and disposal of dismantled material upto a lead of 100m, stacking serviceable and unserviceable materials seperately by Mechanical means as per technical specification Clause 202.3 - Bituminous Courses |
| 11 | EARTHWORK |
| 12 | Lime Stabilization for Improve Sub-grade- By Mechanicall Means - Laying and spreading available soil in the subgrade on a prepared surface, pulverising, mixing and spreading soil in place with rotovator with 2 percent slaked lime having minimum 70 percent of contents of CaO, grading with motor grader and compacting with smooth wheeled road roller at OMC to the desired density to form a layer of improved subgrade as per technical specification Clause 403(The exact quantity of lime shall be as per design ) |
| 13 | Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. |
| 14 | Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 15 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause |
| 16 | Construction of embankment with material obtained from Private land Borrow Pits - Construction of embankment with approved material deposited at site from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope andcompacting to meet requirement of Table 300.1 and 300.2 as per technical specification Clause 301.5 -( Contractors own earth) |
| 17 | GSB, WBM |
| 18 | GSB in 4.05 m width(item will be executed by meterial obtained from dismantling of flexible pavement) Rates will be excluding meterial (reuse dismantled quantity 75%)( Rate 131.65 limitted to PRICE rate ) |
| 19 | Granular Sub-base with Well Graded Material (Table 400.1)By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401. (For Grading II Material) |
| 20 | WBM II Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. |
| 21 | WBM III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 22 | SURFACE DRESSINGWORKS |
| 23 | Prime Coat - Low porosity-providing and applying primer coat with bitumen emulsion (Packed SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at a rate of 0.70 - 1.00 kg/sqm using mechanical means as per technical specification clause 502 |
| 24 | Providing and laying surface dressing as wearing course consisting of a layer of bitumen emulsion laid on the prepared surface, followed by a cover of crushed stone chippings of specified size and rolling with 80-100 kN roller including cleaning the road surface as per Technical Specification Clause 507. ( By Mechanical Means, Case – I: Nominal chipping size 13.2 mm)Bitumen Emulsion Packed |
| 25 | Providing and laying surface dressing as wearing course consisting of a layer of bitumen emulsion laid on the prepared surface, followed by a cover of crushed stone chippings of specified size and rolling with 80-100 kN roller including cleaning the road surface as per Technical Specification Clause 507. (By Mechanical Means, Case –II: Nominal chipping size 6.3 mm) Bitumen Emulsion Packed |
| 26 | CD WORK |
| 27 | Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. |
| 28 | PCC Grade M 10 - Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:3:6 |
| 29 | PCC Grade M 15 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2.5:5 |
| 30 | RCC Grade M 20 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203-upto 5.00m Height |
| 31 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 20 for wearing coat |
| 32 | RCC Grade M 25 - Providingand laying reinforced cement concrete in superstructure complete as per drawings and technical specifications Clause 800, 1205.4 and 1205.5 -upto 5.00mtr Height |
| 33 | RCC Grade M 25 - Providingand laying reinforced cement concrete in superstructure complete as per drawings and technical specifications Clause 800, 1205.4 and 1205.5 -upto 5.00mtr Height |
| 34 | Supplying, fitting and placing TMT bar reinforcement in substructure - complete as per drawings and technical specifications Clauses 1002, 1005,1010 and 1202 for bed block |
| 35 | Supplying, fitting and placing TMT bar reinforcement in superstructure - complete as per drawings and technical specifications Clauses 1002, 1010 and 1202 for parapet |
| 36 | Painting Two coats on New Concrete Suefaces - Painting two coats icluding primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical Specification |
| 37 | PVC WHEEP HOLES - Providing weep holes using 75mm dia PVC pipes 4 kg/sq cm including cost of material , labour charges etc. complete |
| 38 | Sign Boards & KM Stones |
| 39 | Printing new letters and figures of any shade - printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give a even shade as per drawings and technical specifications clause 1701- English and roman |
| 40 | Supplying and fixing fabricated sign board of size 90x25cm and logo of size 60x60cm at start ,second km,fourth km and the end of the roadwith 10gauge ms sheet supported by ISA 75x75x6mm. Fixing the board in cement concrete 14:8(using 40mm broken stone) blocks of size 45x45x60cm with bottom level of the board at 180 cmabove ground level including painting 2 coats of required paint over a coat of iron primer, all labour charges, hire charges for fabrication and cost of materials etc complete (extra 2 nos fro intersection of PWD roads) |
| 41 | Traffic Signs- Semi-reflective Traffic Signs - Providing and fixing ofsemi -reflective cautionary, mandatory and informatory sign asper IRC:67 made of 1.5mm thick MS sheet duly stove white colour in front and gray colour in back with red reflective border of 65mm width and required letters and figures with reflective tape engineering grade as per clause 1701.2.3, of MoRD for rural roads of required shade and colour supported and welded on 47mmx47mmx12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade cement concrete 450mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701.2.2- 600mm equilateral triangle board |
| 42 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 43 | Providing and fixing of typical PMGSY Citizens\" informationboardas per specifications and drawing. Two vertical 75mm square,12 SWG MS tubes of length 290cm with two identical horizontal tubes of length 100cm make the frame for the board. GI sheets of 870x635x1.6 mm welded toMS angle iron frame of 25mm x 25mm x 5mm andstiffened with 25x25x5mmfixed to the ftube frame with 50x50x5mm steel plate makes the information area.The tube posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 800mm below ground level. All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 44 | Providing and Fixing typical PMGSY Maintenance information board as per MoRD specifications and drawings-Two vertical76.1mm outer diameter MS sheet tube posts of 3.60mm thickness (medium class)duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x750mm, 600mm below ground level with two horizontalM S Sheet Tubesof 1000mm length to make the frame of board, four horizontals and two verticalswith M S Sheet rectamngular Tube 50x25x2mm to make the frame to fix the board as per drawing, two M S Sheet 2.00 mm thick board of size 900x1500mm strengthened by 25mmx5mm MS flat iron includingpainting with stove enameled paint on both sides as per MoRD specifications. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 45 | Traffic Signs- Retro-reflective Single Chevronof 50cm x 60cmsize - Providing and fixing of retro-reflectorised Object hazard markersign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixedover aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 |
| 46 | Traffic Signs- Retro-reflective Object hazard marker of 300mm x 900mm size - Providing and fixing of retro-reflectorised Object hazard markersign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixedover aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 300mm x 300mm x 450 mm, 450 mm below ground level as per drawings and Technical Specification Clause 1701 |
| 47 | Road Markers / Road Studs with lens reflector-Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 |
| 48 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 49 | Hectometre Stone- Reinforced cement concrete M15 grade hectometre stone / local stone of standard design as per IRC:8 fixing in position including painting and priming etc.as per drawing and technical Specification clause 1703 - 200m stone (pre-cast) |
| 50 | Protection Work |
| 51 | Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. |
| 52 | DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 53 | PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 For Top of Retaining Wall (top Belt) |
| 54 | Supplying and fixingM15 guard stone of size 1.2 X 0.2 X 0.2 M and embeded in cc 1:4:8 block of zize 0.45X0.45X0.45M plastering and painting etc complete |
| 55 | Supply and fixing R.C.C. M15 boundary stone of size 60 X 20 X20CMS and embeded in CC 1:4:8 block of size 0.45 X 0.45 X 0.45 m, plastering , painting etc complte |
| 56 | Engaging man masdoor ,spl/masdoor for cleaning waste,debris ,silt etc,from the existing drain culvert including lifting and replacing covering slab,foot slab etc to lines and levels- Masdoor skilled |
| 57 | Engaging man masdoor ,spl/masdoor for cleaning waste,debris ,silt etc,from the existing drain culvert including lifting and replacing covering slab,foot slab etc to lines and levels- Masdoor Unskilled |
| 58 | Side Drains |
| 59 | Excavation in roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead up to 50m as per technicalspecification clause302.3 For Foundation |
| 60 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (M-10) |
| 61 | PCC Grade M 15 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2.5:5 |
| 62 | PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 |
| 63 | RCC Grade M 20 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203-upto 5.00m Height |
| 64 | Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 |
| 65 | V Drains |
| 66 | Excavation in soil using Hydraulic Excavator and Tippers with disposal upto 1000m- Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location with a lift upto 1.5m and lead upto 1000mas per technical specification Clause 302.3 |
| 67 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (M-10) |
| 68 | PCC Grade M 20 - Providing concrete for plain/reinforced concrete for wearing coat complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2:4 |
| 69 | PCC Grade M 15 - Providing concrete for plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203- Nominal mix 1:2.5:5 |
| 70 | EARTHEN DRAIN |
| 71 | Surface Drains in Soil- Construction of unlined surface drains of average cross sectional area 0.20sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3.0m and lead of 50m as per technical specification Clause 307 - By Mannuall Means |
| 72 | Total Construction cost |
| 73 | Maintenance for 5 years |
| 74 | Maintenance for first Year after completion |
| 75 | Maintenance for second Year after completion |
| 76 | Maintenance for third Year after completion |
| 77 | Maintenance for fourth Year after completion |
| 78 | Maintenance for fifth Year after completion |
| 79 | Total Maintenance cost |
AI Tender Summary
Tender Timeline
May 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender