Public Works Department-PWD has published Construction Of Two Set Bathroom At Lingshed Gonpa. ( Infrastructure Development For Yarchos Chenmo 2022 At Lingshed ) . ( Under Capex New Scheme 2022-23 ) . Submission Date for this Tender is 28-05-2022. Toilet Bathroom Tenders in khaltsi Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:: All kinds of soil : |
2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. a)All kinds of soil 65% |
3 | Dumping stone including cost of stones in Horizontal on level. |
4 | Providing and laying in position cement concrete of specified grade including curing and including the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including cost and carriage of cement. |
5 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete Including cost and carriage of cement.1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) Including cost and carriage of cement. |
6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing and including cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost and carriage of cement. |
7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Including cost and carriage of steel. |
8 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry Including cost and carriage of cement. |
9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
10 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked,bonded with BWP type synthetic resin adhesive as per IS: 848: |
11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood (Complete Job) |
12 | 15mm Cement plaster on the rough side of single or half brick wall of mix: Including cost and carriage of cement. |
13 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
15 | Providing and fixing bright /matt finished Stainless Oxidised mild steel tower bolts (barrel type) 250x10 mm of approved quality & make with necessary screws etc all completesize as per required |
16 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all completesize as per required |
17 | 6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)Including cost and carriage of cement. |
18 | Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter |
19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
20 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc.complete. In colour such as White, Ivory, Grey, Fume Red Brown |
21 | PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacingPN-16 pipe , 25mm OD(SDR-7.4) |
22 | PN-16 pipe , 32mm OD(SDR-7.4) |
23 | PN-16 pipe , 40mm OD(SDR-7.4) |
24 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
25 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm |
26 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter |
27 | Providing and fixing uplasticised PVC connection pipe with brass unions Including all fittings 3" |
28 | Providing and fixing uplasticised PVC connection pipe with brass unions Including all fittings 2" |
29 | Providing and fixing elbow 25mm x 1/2 complete job |
30 | Providing anf fixing plain bend of required 100mm dia PVC pipe |
31 | Providing nad fixing bib cock of approved quqlity 15mm nominal bore |
32 | Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. |
33 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
34 | Providing and fixing jali of approved rate |
35 | Providing and fixing toilet paper holderC.P. brass |
36 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
37 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour |
38 | Providing nad fixing Urinal pot Complete Job |
39 | Carriage of material by MT from source to site of workincl. loading, unloading and stacking complete job.a) Sand an avg. lead 30 km |
40 | b) Stone aggregate an avg. lead 30 km |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail